Formulation and analysis of a diffusion-velocity particle model for transport-dispersion equations

The modelling of diffusive terms in particle methods is a delicate matter and several models were proposed in the literature to take such terms into account. The diffusion velocity method (DVM), originally designed for the diffusion of passive scalars, turns diffusive terms into convective ones by expressing them as a divergence involving a so-called diffusion velocity. In this paper, DVM is extended to the diffusion of vectorial quantities in the three-dimensional Navier–Stokes equations, in their incompressible, velocity–vorticity formulation. The integration of a large eddy simulation (LES) turbulence model is investigated and a DVM general formulation is proposed. Either with or without LES, a novel expression of the diffusion velocity is derived, which makes it easier to approximate and which highlights the analogy with the original formulation for scalar transport. From this statement, DVM is then analysed in one dimension, both analytically and numerically on test cases to point out its good behaviour.

Structure optimization combining soft-core interaction functions, the diffusion equation method, and molecular dynamics

Smoothing the potential energy surface for structure optimization is a general and commonly applied strategy. We propose a combination of soft-core potential energy functions and a variation of the diffusion equation method to smooth potential energy surfaces, which is applicable to complex systems such as protein structures; The performance of the method was demonstrated by comparison with simulated annealing using the refinement of the undecapeptide Cyclosporin A as a test case. Simulations were repeated many times using different initial conditions and structures since the methods are heuristic and results are only meaningful in a statistical sense.

Use of passive diffusion sampling method for defining NO2 concentrations gradient in São Paulo, Brazil

Abstract Background Air pollution in São Paulo is constantly being measured by the State of Sao Paulo Environmental Agency, however there is no information on the variation between places with different traffic densities. This study was intended to identify a gradient of exposure to traffic-related air pollution within different areas in São Paulo to provide information for future epidemiological studies. Methods We measured NO2 using Palmes' diffusion tubes in 36 sites on streets chosen to be representative of different road types and traffic densities in São Paulo in two one-week periods (July and August 2000). In each study period, two tubes were installed in each site, and two additional tubes were installed in 10 control sites. Results Average NO2 concentrations were related to traffic density, observed on the spot, to number of vehicles counted, and to traffic density strata defined by the city Traffic Engineering Company (CET). Average NO2concentrations were 63μg/m3 and 49μg/m3 in the first and second periods, respectively. Dividing the sites by the observed traffic density, we found: heavy traffic (n = 17): 64μg/m3 (95% CI: 59μg/m3 – 68μg/m3); local traffic (n = 16): 48μg/m3 (95% CI: 44μg/m3 – 52μg/m3) (p < 0.001). Conclusion The differences in NO2 levels between heavy and local traffic sites are large enough to suggest the use of a more refined classification of exposure in epidemiological studies in the city. Number of vehicles counted, traffic density observed on the spot and traffic density strata defined by the CET might be used as a proxy for traffic exposure in São Paulo when more accurate measurements are not available.

Wave velocity method of depth determination for non-uniform short crested wave systems by aerial photography /

Mode of access: Internet.

Development and validation of a stability-indicative agar diffusion assay to determine the potency of flucloxacillin sodium in capsules

Flucloxacillin sodium (FLU) is a semi-synthetic penicillin active against many gram-positive bacteria such as streptococci and penicilinase-producing staphylococci, including methicillin-susceptible S. aureus. This study describes the development and validation of a microbiological assay, applying the diffusion agar method for the determination of FLU, as well as the evaluation of the ability of the method in determining the stability of FLU in capsules against acidic and basic hydrolysis, photolytic and oxidative degradations, using S. aureus ATCC 25923 as micro-organism test and 3 x 3 parallel line assay design (three doses of the standard and three doses of the sample in each plate), with six plates for each assay, according to the Brazilian Pharmacopoeia. The validation method showed good results including linearity, precision, accuracy, robustness and selectivity. The assay is based on the inhibitory effect of FLU using Staphylococcus aureus ATCC 25923. The results of the assay were treated by analysis of variance (ANOVA) and were found to be linear (r = 0.9997) in the range from 1.5 to 6.0 μg/mL, precise (repeatability: R.S.D. = 1.63 and intermediate precision: R.S.D. = 1.64) and accurate (98.96%). FLU solution (from the capsules) exposed to direct UVC light (254 nm), alkaline and acid hydrolysis and hydrogen peroxide causing oxidation were used to evaluate the specificity of the bioassay. Comparison of bioassay and liquid chromatography by ANOVA showed no difference between methodologies. The results demonstrated the validity of the proposed bioassay, which is a simple and useful alternative methodology for FLU determination in routine quality control.

Antimicrobial Resistance of Shigella spp. isolated in the State of Pará, Brazil

INTRODUCTION: Shigella spp. are Gram-negative, nonsporulating, rod-shaped bacteria that belong to the family Enterobacteriaceae and are responsible for shigellosis or bacillary dysentery, an important cause of worldwide morbidity and mortality. METHODS: We studied the antibiotic resistance profiles of 122 Shigella spp. strains (81 S. flexneri, 41 S. sonnei, 1 S. boydii) isolated from patients (female and male from 0 to 80 years of age) presenting diarrhea in different districts of the State of Pará, in the North of Brazil. The antibiotic resistance of the strains, isolated from human fecal samples, was determined by the diffusion disk method and by using the VITEK-2 system. RESULTS: The highest resistance rate found was the resistance rate to tetracycline (93.8%), followed by the resistance rate to chloramphenicol (63.9%) and to trimethoprim/sulfamethoxazole (63.1%). Resistance to at least three drugs was more common among S. flexneri than S. sonnei (39.5% vs. 10%). Six (4.9%) strains were susceptible to all the antibiotics tested. All strains were susceptible to cefotaxime, ceftazidime, ciprofloxacin, nalidixic acid and nitrofurantoin. CONCLUSIONS: High rates of multidrug resistance in Shigella spp. are a serious public health concern in Brazil. It is extremely important to continuously monitor the antimicrobial resistances of Shigella spp. for effective therapy and control measures against shigellosis.

Antimicrobial Resistance in Campylobacter jejuni and Campylobacter coli

Antimicrobial Resistance in Campylobacter jejuni and Campylobacter coli Campylobacters are a common cause of bacterial gastroenteritis worldwide, with Campylobacter jejuni and C. coli being the most common species isolated in human infections. If antimicrobial treatment is required, the drugs of choice at the moment are the macrolides and fluoroquinolones. In this thesis, the in vitro resistance profiles of the C. jejuni and C. coli strains were evaluated with emphasis on multidrug resistance. The aim was also to evaluate the different resistance mechanisms against the macrolides. Further, the disk diffusion method was compared to agar dilution method and its repeatability was evaluated, since it has been widely used for the susceptibility testing of campylobacters. The results of the present study showed that resistance to the fluoroquinolones is common in strains isolated from Finnish patients, but resistance to the macrolides is still rare. Multidrug resistance was associated with resistance to both ciprofloxacin and erythromycin. Among the available per oral drugs, least resistance was observed to coamoxiclav There was no resistance to the carbapenems. Sitafloxacin and tigecycline were in vitro highly effective towards Campylobacter species. A point mutation A2059G of the 23S rRNA gene was the main mechanism behind the macrolide resistance, whereas the efflux pumps did not seem to play an important role when a strain had A2059G mutation. A five amino acids insertion, which has not been described previously, in the ribosomal protein L22 of one highly-resistant C. jejuni strain without mutation in the 23S rRNA gene was also detected. Concerning the disk diffusion method, there was variation in the repeatability In conclusion, macrolides still appear to be the first-choice alternative for suspected Campylobacter enteritis. The in vitro susceptibilities found suggest that co-amoxiclav might be a candidate for clinical trials on campylobacteriosis, but in life-threatening situations, a carbapenem may be the drug of choice. More studies are needed on whether the disk diffusion test method could be improved or whether all susceptibilities of campylobacters should be done using a MIC based method.

Epidemiological characterization of resistance and PCR typing of Shigella flexneri and Shigella sonnei strains isolated from bacillary dysentery cases in Southeast Brazil

Shigella spp are Gram-negative, anaerobic facultative, non-motile, and non-sporulated bacilli of the Enterobacteriaceae family responsible for "Shigellosis" or bacillary dysentery, an important cause of worldwide morbidity and mortality. However, despite this, there are very few epidemiological studies about this bacterium in Brazil. We studied the antibiotic resistance profiles and the clonal structure of 60 Shigella strains (30 S. flexneri and 30 S. sonnei) isolated from shigellosis cases in different cities within the metropolitan area of Campinas, State of São Paulo, Brazil. We used the following well-characterized molecular techniques: enterobacterial repetitive intergenic consensus, repetitive extragenic palindromic, and double-repetitive element-polymerase chain reaction to characterize the bacteria. Also, the antibiotic resistance of the strains was determined by the diffusion disk method. Many strains of S. flexneri and S. sonnei were found to be multi-resistant. S. flexneri strains were resistant to ampicillin in 83.3% of cases, chloramphenicol in 70.0%, streptomycin in 86.7%, sulfamethoxazole in 80.0%, and tetracycline in 80.0%, while a smaller number of strains were resistant to cephalothin (3.3%) and sulfazotrim (10.0%). S. sonnei strains were mainly resistant to sulfamethoxazole (100.0%) and tetracycline (96.7%) and, to a lesser extent, to ampicillin (6.7%) and streptomycin (26.7%). Polymerase chain reaction-based typing supported the existence of specific clones responsible for the shigellosis cases in the different cities and there was evidence of transmission between cities. This clonal structure would probably be the result of selection for virulence and resistance phenotypes. These data indicate that the human sanitary conditions of the cities investigated should be improved.

Studies on the dynamics and rheology of dilute suspensions of Brownian particles in simple shear flow under the action of an external force

We present a novel approach to computing the orientation moments and rheological properties of a dilute suspension of spheroids in a simple shear flow at arbitrary Peclct number based on a generalised Langevin equation method. This method differs from the diffusion equation method which is commonly used to model similar systems in that the actual equations of motion for the orientations of the individual particles are used in the computations, instead of a solution of the diffusion equation of the system. It also differs from the method of 'Brownian dynamics simulations' in that the equations used for the simulations are deterministic differential equations even in the presence of noise, and not stochastic differential equations as in Brownian dynamics simulations. One advantage of the present approach over the Fokker-Planck equation formalism is that it employs a common strategy that can be applied across a wide range of shear and diffusion parameters. Also, since deterministic differential equations are easier to simulate than stochastic differential equations, the Langevin equation method presented in this work is more efficient and less computationally intensive than Brownian dynamics simulations.We derive the Langevin equations governing the orientations of the particles in the suspension and evolve a procedure for obtaining the equation of motion for any orientation moment. A computational technique is described for simulating the orientation moments dynamically from a set of time-averaged Langevin equations, which can be used to obtain the moments when the governing equations are harder to solve analytically. The results obtained using this method are in good agreement with those available in the literature.The above computational method is also used to investigate the effect of rotational Brownian motion on the rheology of the suspension under the action of an external force field. The force field is assumed to be either constant or periodic. In the case of con- I stant external fields earlier results in the literature are reproduced, while for the case of periodic forcing certain parametric regimes corresponding to weak Brownian diffusion are identified where the rheological parameters evolve chaotically and settle onto a low dimensional attractor. The response of the system to variations in the magnitude and orientation of the force field and strength of diffusion is also analyzed through numerical experiments. It is also demonstrated that the aperiodic behaviour exhibited by the system could not have been picked up by the diffusion equation approach as presently used in the literature.The main contributions of this work include the preparation of the basic framework for applying the Langevin method to standard flow problems, quantification of rotary Brownian effects by using the new method, the paired-moment scheme for computing the moments and its use in solving an otherwise intractable problem especially in the limit of small Brownian motion where the problem becomes singular, and a demonstration of how systems governed by a Fokker-Planck equation can be explored for possible chaotic behaviour.

Variación del estado de portador de Staphylococcus aureus en una población de estudiantes de medicina

Para evaluar en estudiantes de medicina la variación del estado de portador de Staphylococcus aureus y su resistencia antimicrobiana, antes y después de la práctica clínica, se realizó un estudio longitudinal en una cohorte de 159 estudiantes de cuarto y noveno semestre universitario. Se tomaron muestras de las zonas periamigdalianas y/o pared posterior de orofaringe, de las fosas nasales y las manos, se cultivaron en agar sangre de cordero al 5% y se incubaron en aerobiosis a 37°C, durante 48 horas. La identificación de Staphylococcus aureus se realizó según las características macroscópicas y pruebas bioquímicas. La susceptibilidad a los antimicrobianos se evaluó mediante el método de difusión de disco, por la técnica de Kirby-Bauer, siguiendo las normas internacionales del Clinical and Laboratory Standards Institute (CLSI), con los siguientes antimicrobianos: ciprofloxacina, vancomicina, oxacilina, cefalotina,clindamicina y rifampicina. La edad promedio de los alumnos de cuarto semestre fue 19,1±1,2 años y el género femenino fue 2/1 más frecuente que el masculino. Se analizaron la presencia de antecedentes como: infecciones, alergias, estado de fumador, otras patologías no infecciosas, uso de antibióticos en los últimos tres meses y procedimientos quirúrgicos u hospitalizaciones seis meses previos a la toma de las muestras. No hubo relación significativa entre la incidencia del estado de portador y los antecedentes estudiados. Se observó un aumento significativo del 15,1%, con respecto al grupo de estudiantes de cuarto semestre, en el estado de portador de S. aureus en el grupo de estudiantes de noveno semestre, después de haber estado expuestos durante tres años al ambiente hospitalario, (p=0,001 Test exacto de Mc Nemar). De los portadores, el 16,4% presentó la bacteria en manos (p<0,001), el 13,8% en fosas nasales (p=0,0015) y el 3,2% en faringe. Por otra parte,el 35,8% de los portadores presentó persistencia, de los cuales el 25,2% fue en fosas nasales; el 4,4%, en faringe y el 3,8% en manos. En cuanto a la resistencia a los antimicrobianos, el 1,9% de las cepas aisladas de los estudiantes de cuarto semestre presentó resistencia: una a ciprofloxacina y dos a clindamicina (tres estudiantes). Por su parte, el 2,5% de las cepas aisladas de estudiantes de noveno semestre fue resistente: una a cefalotina, ciprofloxacina, oxacilina y clindamicina, una a cefalotina y oxacilina y dos a clindamicina (cuatro estudiantes). En el 1,3% del grupo estudiado se aislaron cepas de Staphylococcus aureus Resistentes a la Meticilina (MRSA, por sus siglas en inglés). Estos resultados no muestran diferencias significativas (p=1.000). 

Atividade comparada da cefepima, cefpiroma e amicacina em amostras bacterianas hospitalares

The objective of this study was to evaluate the in vitro activity of cefepime, cefpirome and amikacin against the most prevalent nosocomial bacteria. Initially a prospective study was designed to compare the bacterial susceptibility to the three drugs using 1,022 pathogenic strains. The strains were isolated from hospitalized patients of the Hospital das Clinicas - Faculdade de Medicina de Botucatu, SP, from March to December of 1996, by using the Bauer-Kirby susceptibility diffusion controlled method. The activity of cefepime by the Kirby-Bauer method was significantly higher (χ2, p ≤ 0.05) than cefpirome and amikacin for the following bacteria: P. aeruginosa (72% x 56% x 64%, respectively), Enterobacter cloacae (98% x 88% x 80%) and total strains (79.5% x 74.3% x 76.8%). Cefpirome exhibited higher activity than cefepime only to Enterococcus faecalis (42% x 23%). In the 12 other bacterial groups studied the sensibility of the three drugs was similar (χ2, p ≥ 0.05). The minimal inhibitory concentration (MIC) for 127 bacterial strains - Enterobacter cloacae (12), Citrobacter sp (15), Pseudomonas aeruginosa (50), Acinetobacter baumannii (12), BGNF others (22) and Enterococcus faecalis (16)-from the same origin previously described and isolated during 1997, was determined by E-test. Ranges of MIC intervals, MIC(50%), MIC(90%) and the proportion of the sensitive bacterial strains were determined and permitted the following analysis: the activity of cefepime against Gram-negative bacteria was 2 or more times higher than that of cefpirome and amikacin, specially when CIM(90%) was considered; the activity of cefpirome was higher only against E. faecalis. This information must be considered in the rational use of antibiotic, specially in patients with nosocomial infections.

Estudos de estabilidade no sistema Ʋ andromedae A

Pós-graduação em Física - FEG

Monte Carlo simulations of nucleation of colloidal crystals

A crystal nucleus in a finite volume may exhibit phase coexistence with a surrounding fluid. The thermodynamic properties of the coexisting fluid (pressure and chemical potential) are enhanced relative to their coexistence values. This enhancement is uniquely related to the surface excess free energy. rnA model for weakly attractive soft colloidal particles is investigated, the so called Asakura-Oosawa model. In simulations, this model allows for the calculation of the pressure in the liquid using the virial formula directly. The phase coexistence pressure in the thermodynamic limit is obtained from the interface velocity method. We introduce a method by which the chemical potential in dense liquids can be measured. There is neither a need to locate the interface nor to compute the anisotropic interfacial tension to obtain nucleation barriers. Therefore, our analysis is appropriate for nuclei of arbitrary shape. Monte Carlo simulations over a wide range of nucleus volumes yield to nucleation barriers independent from the total system volume. The interfacial tension is determined via the ensemble-switch method, hence a detailed test of classical nucleation theory is possible. The anisotropy of the interfacial tension and the resulting non-spherical shape has only a minor effect on the barrier for the Asakura-Oosawa model.

Thermal release rate studies of nuclear reaction products from polycrystalline metal matrices

The thermal release rate of nuclear reaction products was investigated in offline annealing experiments. This work was motivated by the search for a high melting catcher material for recoiling products from heavy ion induced nuclear fusion reactions. Polycrystalline refractory metal foils of Ni, Y, Zr, Nb, Mo, Hf, W, and Re were investigated as catcher metals. Diffusion data for various tracer/host combinations were deduced from the measured release rates. This work focuses on the diffusion and the release rate of volatile p-elements from row 5 and 6 of the periodic table as lighter homologues of the superheavy elements with Z ≥ 113 to be studied in future experiments. A massive radiation damage enhancement of the diffusion velocity was observed. Diffusion trends have been established along the groups and rows of the periodic table based on the dependence of diffusion velocity on atomic sizes.

Theoretical prediction of a crystal structure.

The diffusion equation method of global minimization is applied to compute the crystal structure of S6, with no a priori knowledge about the system. The experimental lattice parameters and positions and orientations of the molecules in the unit cell are predicted correctly.