Contribution of different vegetable types to exogenous nitrate and nitrite exposure

This study reports the levels of nitrate and nitrite of 34 vegetable samples, including different varieties of cabbage, lettuce, spinaches, parsley and turnips, collected in several locations of an intensive agricultural area (Modivas, Vila do Conde, northern Portugal). Nitrate levels ranged between 54 and 2440 mg NO-3 kg-1, while nitrite levels ranged between 1.1 and 57 mg NO-2 kg-1. The maximum residue levels established for nitrate in spinach and lettuce samples were not exceeded. Nitrate and nitrite levels reported in the literature for the same type of samples are reviewed, as well as the contribution of vegetables to nitrate and nitrite dietary exposure of populations.

Haemolytic activity of Actinobacillus actinomycetemcomitans strains on different blood types

Haemolytic activity of sixty nine Actinobacillus actinomycetemcomitans strains on different animal and human blood types was examined by using a trypticase soy agar supplemented with yeast extract (0.5%). Blood types used were: rabbit, sheep and human (A, Rh+; A, Rh-; B, Rh+; B, Rh-; O, Rh+; O, Rh-; AB, Rh+; AB, Rh- groups). Plates were inoculated and, incubated in microaerophilic conditions, at 37ºC, for 48 h. The haemolytic activity of the tested strains was characterized as alpha-haemolysis. Only two isolates were not haemolytic on all blood types (2.9%), two strains were haemolytic only on human blood (one strain on AB, Rh+ group and another one on A, Rh+ and AB, Rh+ groups). No specificity between haemolysin produced by the tested strains and blood type was observed.

Tetracycline and trimethoprim/sulfamethoxazole at clinical laboratory: can they help to characterize Staphylococcus aureus carrying different SCCmec types?

INTRODUCTION: Methicillin-resistant Staphylococcus aureus (MRSA) can be difficult to detect at the clinical practice. METHODS: We analyzed 140 MRSA isolates from inpatients to correlate the antimicrobial susceptibility with the SCCmec types. RESULTS: Type III (n = 63) isolates were more resistant to ciprofloxacin, clindamycin, cloramphenicol, erythromycin, gentamicin, and rifampin than type IV (n = 65) ones (p < 0.05). Moreover, type IV isolates were susceptible to tetracycline (100%) and trimethoprim/sulfamethoxazole (98%), while type III isolates presented resistance to them. CONCLUSIONS: In regions where these SCCmec types are prevalent, the detection of specific resistant phenotypes could help to predict them, mainly when there are no technical conditions to SCCmec typing.

Distribution of dengue vectors in neighborhoods with different urbanization types of Manaus, state of Amazonas, Brazil

Aedes aegypti and Ae. albopictus are vectors of dengue viruses, which cause endemic disease in the city of Manaus, capital of the state of Amazonas, Brazil. More than 53 thousand cases have been registered in this city since the first epidemic in 1998. We evaluated the hypothesis that different ecological conditions result in different patterns of vector infestation in Manaus, by measuring the infestation level in four neighborhoods with different urbanization patterns, during the rainy (April), dry (August), and transitional (November) seasons. Ae. aegypti predominated throughout the study areas and sampling periods, representing 86% of all specimens collected in oviposition traps. High frequencies of houses positive for both species were observed in all studied sites, with Ae. aegypti present in more than 84% of the houses in all seasons. Ae. albopictus, on the other hand, showed more spatial and temporal variation in abundance. We found no association between infestation level and house traits. This study highlights the homogeneity of dengue vector distribution in Manaus.

Sociodemographic and occupational risk factors associated with the development of different burnout types: the cross-sectional University of Zaragoza study

BACKGROUND: Three different burnout types have been described: The "frenetic" type describes involved and ambitious subjects who sacrifice their health and personal lives for their jobs; the "underchallenged" type describes indifferent and bored workers who fail to find personal development in their jobs, and the "worn-out" in type describes neglectful subjects who feel they have little control over results and whose efforts go unacknowledged. The study aimed to describe the possible associations between burnout types and general sociodemographic and occupational characteristics. METHODS: A cross-sectional study was carried out on a multi-occupational sample of randomly selected university employees (n = 409). The presence of burnout types was assessed by means of the "Burnout Clinical Subtype Questionnaire (BCSQ-36)", and the degree of association between variables was assessed using an adjusted odds ratio (OR) obtained from multivariate logistic regression models. RESULTS: Individuals working more than 40 hours per week presented with the greatest risk for "frenetic" burnout compared to those working fewer than 35 hours (adjusted OR = 5.69; 95% CI = 2.52-12.82; p < 0.001). Administration and service personnel presented the greatest risk of "underchallenged" burnout compared to teaching and research staff (adjusted OR = 2.85; 95% CI = 1.16-7.01; p = 0.023). Employees with more than sixteen years of service in the organisation presented the greatest risk of "worn-out" burnout compared to those with less than four years of service (adjusted OR = 4.56; 95% CI = 1.47-14.16; p = 0.009). CONCLUSIONS: This study is the first to our knowledge that suggests the existence of associations between the different burnout subtypes (classified according to the degree of dedication to work) and the different sociodemographic and occupational characteristics that are congruent with the definition of each of the subtypes. These results are consistent with the clinical profile definitions of burnout syndrome. In addition, they assist the recognition of distinct profiles and reinforce the idea of differential characterisation of the syndrome for more effective treatment.

Accuracy of phenotypic methicillin susceptibility methods in the detection of Staphylococcus aureus isolates carrying different SCCmec types

A total of 138 isolates, 118 methicillin-resistant Staphylococcus aureus (MRSA) isolates (staphylococcal cassette chromosome type II, 20 isolates, type III, 39 isolates and type IV, 59 isolates) and 20 methicillin-sensitive S. aureus isolates were evaluated by phenotypic methods: cefoxitin and oxacillin disk diffusion (DD), agar dilution (AD), latex agglutination (LA), oxacillin agar screening (OAS) and chromogenic agar detection. All methods showed 100% specificity, but only the DD tests presented 100% sensitivity. The sensitivity of the other tests ranged from 82.2% (OAS)-98.3% (AD). The LA test showed the second lowest sensitivity (86.4%). The DD test showed high accuracy in the detection of MRSA isolates, but there was low precision in the detection of type IV isolates by the other tests, indicating that the genotypic characteristics of the isolates should be considered.

Poultry carcass decomposition and physicochemical analysis of compounds in different Composter types

This study aimed to assess five composter types in poultry carcasses decomposition and to perform a physicochemical analysis of the compounds obtained. Composter types used were six-hole brick, wood, screen, windrow with three PVC pipes with six holes and windrow with three PVC pipes with 10 holes. Composting was followed by four periods using wood shaving like substrate with one bird carcass placed in each composter. Pile turning was performed every 10 days and temperature in each layer was measured on 1st, 7th, 14th, 19th and 29th day, at 3 p.m., as well as room temperature. Temperature during pile turning was also measured at five points per layer and carcass weighing performed to calculate decomposition percentage. Physicochemical parameters evaluated in substrates were moisture, ash, phosphorus, potassium, nitrogen, pH, organic carbon and C/N ratio, up to 30 days. Data were analyzed by repeated measures model, using MIXED method of SAS software. All values of final physicochemical composition of substrates were found according to values of IN-25, except nitrogen. The composter types were efficient in decomposition of poultry carcasses.

Comparison of the euryarchaeal microbial community in guts and food-soil of the soil-feeding termite Cubitermes fungifaber across different soil types

Termites are an important component of tropical soil communities and have a significant affect on the structure and nutrient content of soil. Digestion in termites is related to gut structure, gut physico-chemical conditions and gut symbiotic microbiota. Here we describe the use of 16S rRNA gene sequencing and Terminal-restriction Fragment Length Polymorphism (T-RFLP) analysis to examine methanogenic Archaea (MA) in the guts and food-soil of the soil-feeder Cubitermes fungifaber Sjostedt across a range of soil types. If they are strictly vertically inherited, then MA in guts should be the same in all individuals even if the soils differ across sites. In contrast, gut MA should reflect what is present in soil if populations are merely a reflection of what is ingested as the insects forage. We show clear differences between the euryarchaeal communities in termite guts and in food-soils from five different sites. Analysis of 16S rRNA gene clones indicated little overlap between the gut and soil communities. Gut clones were related to a termite-derived Methanomicrobiales cluster, to Methanobrevibacter and, surprisingly, to the haloalkaliphile Natronococcus. Soil clones clustered with Methanosarcina, Methanomicrococcus or Rice Cluster I. T-RFLP analysis indicated that the archaeal communities in the soil samples differed from site to site, whereas those in termite guts were similar between sites. There was some overlap between the gut and soil communities but these may represent transient populations in either guts or soil. Our data does not support the hypothesis that termite gut MA are derived from their food soil but also does not support a purely vertical transmission of gut microflora.

Comparison of Euryarchaea strains in the guts and food-soil of the soil-feeding termite Cubitermes fungifaber across different soil types

Termites are an important component of tropical soil communities and have a significant effect on the structure and nutrient content of soil. Digestion in termites is related to gut structure, gut physicochemical conditions, and gut symbiotic microbiota. Here we describe the use of 16S rRNA gene sequencing and terminal-restriction fragment length polymorphism (T-RFLP) analysis to examine methanogenic archaea (MA) in the guts and food-soil of the soil-feeder Cubitermes fungifaber Sjostedt across a range of soil types. If these MA are strictly vertically inherited, then the MA in guts should be the same in all individuals even if the soils differ across sites. In contrast, gut MA should reflect what is present in soil if populations are merely a reflection of what is ingested as the insects forage. We show clear differences between the euryarchaeal communities in termite guts and in food-soils from five different sites. Analysis of 16S rRNA gene clones indicated little overlap between the gut and soil communities. Gut clones were related to a termite-derived Methanomicrobiales cluster, to Methanobrevibacter and, surprisingly, to the haloalkaliphile Natronococcus. Soil clones clustered with Methanosarcina, Methanomicrococcus, or rice cluster I. T-RFLP analysis indicated that the archaeal communities in the soil samples differed from site to site, whereas those in termite guts were similar between sites. There was some overlap between the gut and soil communities, but these may represent transient populations in either guts or soil. Our data do not support the hypothesis that termite gut MA are derived from their food-soil but also do not support a purely vertical transmission of gut microflora.

Contributions of different cloud types to feedbacks and rapid adjustments in CMIP5

Using five climate model simulations of the response to an abrupt quadrupling of CO2, the authors perform the first simultaneous model intercomparison of cloud feedbacks and rapid radiative adjustments with cloud masking effects removed, partitioned among changes in cloud types and gross cloud properties. Upon CO2 quadrupling, clouds exhibit a rapid reduction in fractional coverage, cloud-top pressure, and optical depth, with each contributing equally to a 1.1 W m−2 net cloud radiative adjustment, primarily from shortwave radiation. Rapid reductions in midlevel clouds and optically thick clouds are important in reducing planetary albedo in every model. As the planet warms, clouds become fewer, higher, and thicker, and global mean net cloud feedback is positive in all but one model and results primarily from increased trapping of longwave radiation. As was true for earlier models, high cloud changes are the largest contributor to intermodel spread in longwave and shortwave cloud feedbacks, but low cloud changes are the largest contributor to the mean and spread in net cloud feedback. The importance of the negative optical depth feedback relative to the amount feedback at high latitudes is even more marked than in earlier models. The authors show that the negative longwave cloud adjustment inferred in previous studies is primarily caused by a 1.3 W m−2 cloud masking of CO2 forcing. Properly accounting for cloud masking increases net cloud feedback by 0.3 W m−2 K−1, whereas accounting for rapid adjustments reduces by 0.14 W m−2 K−1 the ensemble mean net cloud feedback through a combination of smaller positive cloud amount and altitude feedbacks and larger negative optical depth feedbacks.

Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study

Internal tapered connections were developed to improve biomechanical properties and to reduce mechanical problems found in other implant connection systems. The purpose of this study was to evaluate the effects of mechanical loading and repeated insertion/removal cycles on the torque loss of abutments with internal tapered connections. Sixty-eight conical implants and 68 abutments of two types were used. They were divided into four groups: groups 1 and 3 received solid abutments, and groups 2 and 4 received two-piece abutments. In groups 1 and 2, abutments were simply installed and uninstalled; torque-in and torque-out values were measured. In groups 3 and 4, abutments were installed, mechanically loaded and uninstalled; torque-in and torque-out values were measured. Under mechanical loading, two-piece abutments were frictionally locked into the implant; thus, data of group 4 were catalogued under two subgroups (4a: torque-out value necessary to loosen the fixation screw; 4b: torque-out value necessary to remove the abutment from the implant). Ten insertion/removal cycles were performed for every implant/abutment assembly. Data were analyzed with a mixed linear model (P <= 0.05). Torque loss was higher in groups 4a and 2 (over 30% loss), followed by group 1 (10.5% loss), group 3 (5.4% loss) and group 4b (39% torque gain). All the results were significantly different. As the number of insertion/removal cycles increased, removal torques tended to be lower. It was concluded that mechanical loading increased removal torque of loaded abutments in comparison with unloaded abutments, and removal torque values tended to decrease as the number of insertion/removal cycles increased. To cite this article:Ricciardi Coppede A, de Mattos MdaGC, Rodrigues RCS, Ribeiro RF. Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study.Clin. Oral Impl. Res. 20, 2009; 624-632.doi: 10.1111/j.1600-0501.2008.01690.x.

Finite Element Stress Analysis of Edentulous Mandibles with Different Bone Types Supporting Multiple-Implant Superstructures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bond strength of resin modified glass ionomer cement to primary dentin after cutting with different bur types and dentin conditioning

The aim of this in vitro study was to evaluate the effect of different bur types and acid etching protocols on the shear bond strength (SBS) of a resin modified glass ionomer cement (RM-GIC) to primary dentin. Forty-eight clinically sound human primary molars were selected and randomly assigned to four groups (n=12). In G1, the lingual surface of the teeth was cut with a carbide bur until a 2.0-mm-diameter dentin area was exposed, followed by the application of RM-GIC (Vitremer - 3M/ESPE) prepared according to the manufacturer's instructions. The specimens of G2, received the same treatment of G1, however the dentin was conditioned with phosphoric acid. In groups G3 and G4 the same procedures of G1 and G2 were conducted respectively, nevertheless dentin cutting was made with a diamond bur. The specimens were stored in distilled water at 37 degrees C for 24h, and then tested in a universal testing machine. SBS. data were submitted to 2-way ANOVA (= 5%) and indicated that SBS values of RM-GIC bonded to primary dentin cut with different burs were not statistically different, but the specimens that were conditioned with phosphoric acid presented SBS values significantly higher that those without conditioning. To observe micromorphologic characteristics of the effects of dentin surface cut by diamond or carbide rotary instruments and conditioners treatment, some specimens were examined by scanning electron microscopy. Smear layer was present in all specimens regardless of the type of rotary instrument used for dentin cutting, and specimens etched with phosphoric acid presented more effective removal of smear layer. It was concluded that SBS of a RM-GIC to primary dentin was affected by the acid conditioning but the bur type had no influence.

DISTRIBUTION OF DIFFERENT FIBER TYPES OF M-EXTENSOR CARPI RADIALIS LONGUS OF THE RAT

As revealed by the NADH-diaphorase and myosine ATPase, the M. extensor carpi radialis longus of the rat possesses at least 3 main kinds of fibres, with different distribution on the superficial and deep portions of the muscle. The superficial portion revealed that 67.68 % are FG (fast-twitch-glycolytic) fibres, 14.72 % are FOG (fast-twitch-oxidative) fibres and 17.60 % are SO (slow-twitch-glycolytic) fibres. Already the deep portion revealed that 71.29 % are SO (slow-twitch-glycolytic) fibres, 17.46 % are FOG (fast-twitch-oxidative-glycolytic) fibres and 11.25 % are FG (fast-twitch-glycolytic) fibres. The miosine ATPase reaction was used to demonstrate contracting characteristics. These findings suggest that the movements of fast contraction of the M. extensor carpi radialis longus are predominant.