Ambiguity Acceptance Testing : A Comparison of the Ratio Test and Difference Test

Integer ambiguity resolution is an indispensable procedure for all high precision GNSS applications. The correctness of the estimated integer ambiguities is the key to achieving highly reliable positioning, but the solution cannot be validated with classical hypothesis testing methods. The integer aperture estimation theory unifies all existing ambiguity validation tests and provides a new prospective to review existing methods, which enables us to have a better understanding on the ambiguity validation problem. This contribution analyses two simple but efficient ambiguity validation test methods, ratio test and difference test, from three aspects: acceptance region, probability basis and numerical results. The major contribution of this paper can be summarized as: (1) The ratio test acceptance region is overlap of ellipsoids while the difference test acceptance region is overlap of half-spaces. (2) The probability basis of these two popular tests is firstly analyzed. The difference test is an approximation to optimal integer aperture, while the ratio test follows an exponential relationship in probability. (3) The limitations of the two tests are firstly identified. The two tests may under-evaluate the failure risk if the model is not strong enough or the float ambiguities fall in particular region. (4) Extensive numerical results are used to compare the performance of these two tests. The simulation results show the ratio test outperforms the difference test in some models while difference test performs better in other models. Particularly in the medium baseline kinematic model, the difference tests outperforms the ratio test, the superiority is independent on frequency number, observation noise, satellite geometry, while it depends on success rate and failure rate tolerance. Smaller failure rate leads to larger performance discrepancy.

Assessment of Pharmaceutical Equivalence: Difference Test or Equivalence Test?

Pharmaceutical equivalence is an important step towards the confirmation of similarity and Interchangeability among pharmaceutical products, particularly regarding those that win not be tested for bioequivalence. The aim of this paper is to compare traditional difference testing to two one-side equivalence tests in the assessment of pharmaceutical equivalence, by means of equivalence studies between similar, generic and reference products of acyclovir cream, atropine sulfate injection, meropenem for injection, and metronidazole injection. All tests were performed in accordance with the Brazilian Pharmacopeia or the United States Pharmacopeia. All four possible combinations of results arise in these comparisons of difference testing and equivalence testing. Most of the former did not show significant difference, whereas the latter presented similarity. We concluded that equivalence testing is more appropriate than difference testing, what can make it a useful tool to assess pharmaceutical equivalence in products that will not be tested for bioequivalence.

Probing three-way interactions in moderated multiple regression:Development and application of a slope difference test

Researchers often use 3-way interactions in moderated multiple regression analysis to test the joint effect of 3 independent variables on a dependent variable. However, further probing of significant interaction terms varies considerably and is sometimes error prone. The authors developed a significance test for slope differences in 3-way interactions and illustrate its importance for testing psychological hypotheses. Monte Carlo simulations revealed that sample size, magnitude of the slope difference, and data reliability affected test power. Application of the test to published data yielded detection of some slope differences that were undetected by alternative probing techniques and led to changes of results and conclusions. The authors conclude by discussing the test's applicability for psychological research. Copyright 2006 by the American Psychological Association.

Getting value out of your sensory testing - the difference from control test

Non-parametric difference tests such as triangle and duo-trio tests traditionally are used to establish differences or similarities between products. However they only supply the researcher with partial answers and often further testing is required to establish the nature, size and direction of differences. This paper looks at the advantages of the difference from control (DFC) test (also known as degree of difference test) and discusses appropriate applications of the test. The scope and principle of the test, panel composition and analysis of results are presented with the aid of suitable examples. Two of the major uses of the DFC test are in quality control and shelf-life testing. The role DFC takes in these areas and the use of other tests to complement the testing is discussed. Controls or standards are important in both these areas and the use of standard products, mental and written standards and blind controls are highlighted. The DFC test has applications in products where the duo-trio and triangle tests cannot be used because of the normal heterogeneity of the product. While the DFC test is a simple difference test it can be structured to give the researcher more valuable data and scope to make informed decisions about their product.

A new ambiguity acceptance test threshold determination method with controllable failure rate

The ambiguity acceptance test is an important quality control procedure in high precision GNSS data processing. Although the ambiguity acceptance test methods have been extensively investigated, its threshold determine method is still not well understood. Currently, the threshold is determined with the empirical approach or the fixed failure rate (FF-) approach. The empirical approach is simple but lacking in theoretical basis, while the FF-approach is theoretical rigorous but computationally demanding. Hence, the key of the threshold determination problem is how to efficiently determine the threshold in a reasonable way. In this study, a new threshold determination method named threshold function method is proposed to reduce the complexity of the FF-approach. The threshold function method simplifies the FF-approach by a modeling procedure and an approximation procedure. The modeling procedure uses a rational function model to describe the relationship between the FF-difference test threshold and the integer least-squares (ILS) success rate. The approximation procedure replaces the ILS success rate with the easy-to-calculate integer bootstrapping (IB) success rate. Corresponding modeling error and approximation error are analysed with simulation data to avoid nuisance biases and unrealistic stochastic model impact. The results indicate the proposed method can greatly simplify the FF-approach without introducing significant modeling error. The threshold function method makes the fixed failure rate threshold determination method feasible for real-time applications.

A novel ambiguity acceptance test threshold determination method with controllable failure rate

Ambiguity validation as an important procedure of integer ambiguity resolution is to test the correctness of the fixed integer ambiguity of phase measurements before being used for positioning computation. Most existing investigations on ambiguity validation focus on test statistic. How to determine the threshold more reasonably is less understood, although it is one of the most important topics in ambiguity validation. Currently, there are two threshold determination methods in the ambiguity validation procedure: the empirical approach and the fixed failure rate (FF-) approach. The empirical approach is simple but lacks of theoretical basis. The fixed failure rate approach has a rigorous probability theory basis, but it employs a more complicated procedure. This paper focuses on how to determine the threshold easily and reasonably. Both FF-ratio test and FF-difference test are investigated in this research and the extensive simulation results show that the FF-difference test can achieve comparable or even better performance than the well-known FF-ratio test. Another benefit of adopting the FF-difference test is that its threshold can be expressed as a function of integer least-squares (ILS) success rate with specified failure rate tolerance. Thus, a new threshold determination method named threshold function for the FF-difference test is proposed. The threshold function method preserves the fixed failure rate characteristic and is also easy-to-apply. The performance of the threshold function is validated with simulated data. The validation results show that with the threshold function method, the impact of the modelling error on the failure rate is less than 0.08%. Overall, the threshold function for the FF-difference test is a very promising threshold validation method and it makes the FF-approach applicable for the real-time GNSS positioning applications.

Evaluation of the Test-mate ChE (cholinesterase) field kit in acute organophosphorus poisoning

STUDY OBJECTIVE: Measurement of acetylcholinesterase (AChE) is recommended in the management of organophosphorus poisoning, which results in 200,000 deaths worldwide annually. The Test-mate ChE 400 is a portable field kit designed for detecting occupational organophosphorus exposure that measures RBC AChE and plasma cholinesterase (PChE) within 4 minutes. We evaluate Test-mate against a reference laboratory test in patients with acute organophosphorus self-poisoning. METHODS: This was a cross-sectional comparison study of 14 patients with acute organophosphorus poisoning between May 2007 and June 2008. RBC AChE and PChE were measured in 96 and 91 samples, respectively, with the Test-mate ChE field kit and compared with a reference laboratory, using the limits of agreement method (Bland and Altman), κ statistics, and Spearman's correlation coefficients. RESULTS: There was good agreement between the Test-mate ChE and the reference laboratory for RBC AChE. The mean difference (Test-mate-reference) was -0.62 U/g hemoglobin, 95% limits of agreement -10.84 to 9.59 U/g hemoglobin. Good agreement was also observed between the categories of mild, moderate, and severe RBC AChE inhibition (weighted κ 0.85; 95% confidence interval [CI] 0.83 to 0.87). Measurement of PChE also showed good agreement, with a mean difference (Test-mate-reference) of +0.06 U/mL blood, 95% limits of agreement -0.41 to 0.53 U/mL blood. Spearman's correlation coefficients were 0.87 (95% CI 0.81 to 0.91) for RBC AChE and 0.76 (95% CI 0.66 to 0.84) for PChE. Analysis for within-subject correlation of subjects did not change the limits of agreement. CONCLUSION: The Test-mate ChE field kit reliably provides rapid measurement of RBC AChE in acute organophosphorus poisoning.

The performance of South African English first language child speakers on a "low linguistically loaded" central auditory processing test protocol

The lack of standardized tests of central auditory processing disorder (CAPD) in South Africa (SA) led to the formation of a SA CAPD Taskforce, and the interim development of a "low linguistically loaded" CAPD test protocol using test recordings from the 'Tonal and Speech Materials for Auditory Perceptual Assessment Disc 2.0'. This study inferentially compared the performance of 16 SA English first, and 16 SA English second, language adult speakers on this test protocol, and descriptively compared their performances to previously published American normative data. Comparisons between the SA English first and second language speakers showed a poorer right ear performance (p < .05) by the second language speakers on the two-pair dichotic digits test only. Equivalent performances (p < .05) were observed on the left ear performance on the two pair dichotic digits test, and the frequency patterns test, the duration patterns test, the low-pass filtered speech test, the 45% time compressed speech test, the speech masking level difference test, and the consonant vowel consonant (CVC) binaural fusion test. Comparisons between the SA English and the American normative data showed many large differences (up to 37.1% with respect to predicted pass criteria as calculated by mean-2SD cutoffs), with the SA English speakers performing both better and worse depending on the test involved. As a result, the American normative data was not considered appropriate for immediate use as normative data in SA. Instead, the preliminary data provided in this study was recommended as interim normative data for both SA English first and second language adult speakers, until larger scale SA normative data can be obtained.

Ligament-derived matrix stimulates a ligamentous phenotype in human adipose-derived stem cells.

Human adipose stem cells (hASCs) can differentiate into a variety of phenotypes. Native extracellular matrix (e.g., demineralized bone matrix or small intestinal submucosa) can influence the growth and differentiation of stem cells. The hypothesis of this study was that a novel ligament-derived matrix (LDM) would enhance expression of a ligamentous phenotype in hASCs compared to collagen gel alone. LDM prepared using phosphate-buffered saline or 0.1% peracetic acid was mixed with collagen gel (COL) and was evaluated for its ability to induce proliferation, differentiation, and extracellular matrix synthesis in hASCs over 28 days in culture at different seeding densities (0, 0.25 x 10(6), 1 x 10(6), or 2 x 10(6) hASC/mL). Biochemical and gene expression data were analyzed using analysis of variance. Fisher's least significant difference test was used to determine differences between treatments following analysis of variance. hASCs in either LDM or COL demonstrated changes in gene expression consistent with ligament development. hASCs cultured with LDM demonstrated more dsDNA content, sulfated-glycosaminoglycan accumulation, and type I and III collagen synthesis, and released more sulfated-glycosaminoglycan and collagen into the medium compared to hASCs in COL (p

The structure of the Statistics Anxiety Rating Scale: A confirmatory factor analysis using UK psychology students

This study aimed to examine the structure of the statistics anxiety rating scale. Responses from 650 undergraduate psychology students throughout the UK were collected through an on-line study. Based on previous research three different models were specified and estimated using confirmatory factor analysis. Fit indices were used to determine if the model fitted the data and a likelihood ratio difference test was used to determine the best fitting model. The original six factor model was the best explanation of the data. All six subscales were intercorrelated and internally consistent. It was concluded that the statistics anxiety rating scale was found to measure the six subscales it was designed to assess in a UK population.

Phylogenetic Analyses of Eriotheca and Related Genera (Bombacoideae, Malvaceae)

Molecular and morphological data have shown that Bombacoideae and Malvoideae together form a well-supported Malvatheca clade. Phylogenetic relationships in Bombacoideae have been studied, but some genera in Bombax s. I. have not been adequately sampled for sufficiently variable molecular markers. The relationships of Eriotheca, for example, have yet to be resolved. Here, nuclear (ITS) and chloroplast (trnL-Fand matK) sequence data from 50 exemplars of Bombacoideae and seven additional taxa from other genera of Malvatheca were used to test monophyly of Eriotheca and its relationships with related genera of Bombax s. I. Parsimony and Bayesian analyses of individual and combined sequence data suggest that Eriotheca is not monophyletic as currently circumscribed but forms a paraphyletic grade containing Pachira s. 1. The newly discovered Eriotheca + Pachira clade has a probable synapomorphy of striate seeds. In addition, two other moderately supported clades emerged within the core Bombacoideae: Pseudobombax + Ceiba s. 1. and Bombax + Spirotheca + Pachira quinata. These three clades, and the African Rhodognaphalon together constitute the major clade of core Bombacoideae, whereas Adansonia appears to be more closely related to Catostemma, Scleronema, and Cavanillesia. The phylogenetic results imply three independent migrations from the New to Old World and homoplasy in staminal morphology.

The genus Coleodactylus (Sphaerodactylinae, Gekkota) revisited: A molecular phylogenetic perspective

Nucleotide sequence data from a mitochondrial gene (16S) and two nuclear genes (c-mos, RAG-1) were used to evaluate the monophyly of the genus Coleodactylus, to provide the first phylogenetic hypothesis of relationships among its species in a cladistic framework, and to estimate the relative timing, of species divergences. Maximum Parsimony, Maximum Likelihood and Bayesian analyses of the combined data sets retrieved Coleodactylus as a monophyletic genus, although weakly Supported. Species were recovered as two genetically and morphological distinct clades, with C. amazonicus populations forming the sister taxon to the meridionalis group (C. brachystoma, C. meridionalis, C. natalensis, and C. septentrionalis). Within this group, C. septentrionalis was placed as the sister taxon to a clade comprising the rest of the species, C. meridionalis was recovered as the sister species to C. brachystoma, and C natalensis was found nested within C. meridionalis. Divergence time estimates based on penalized likelihood and Bayesian dating methods do not Support the previous hypothesis based on the Quaternary rain forest fragmentation model proposed to explain the diversification of the genus. The basal cladogenic event between major lineages of Coleodactylus was estimated to have occurred in the late Cretaceous (72.6 +/- 1.77 Mya), approximately at the same point in time than the other genera of Sphaerodactylinae diverged from each other. Within the meridionalis group, the split between C. septentrionalis and C. brachystoma + C. meridionalis was placed in the Eocene (46.4 +/- 4.22 Mya), and the divergence between C. brachystoma and C. meridionalis was estimated to have occurred in the Oligocene (29.3 +/- 4.33 Mya). Most intraspecific cladogenesis occurred through Miocene to Pliocene, and only for two conspecific samples and for C. natalensis could a Quaternary differentiation be assumed (1.9 +/- 1.3 Mya). (C) 2008 Elsevier Inc. All rights reserved.

Evolutionary patterns in neotropical Helieae (Gentianaceae): evidence from morphology, chloroplast and nuclear DNA sequences

Parsimony-based phylogenetic analyses of the neotropical tribe Helieae (Gentianaceae) are presented, including 22 of the 23 genera and 60 species. This study is based on data from morphology, palynology, and seed micromorphology (127 structural characters), and DNA sequences (matK, trnL intron, ITS). Phylogenetic reconstructions based on ITS and morphology provided the greatest resolution, morphological data further helping to tentatively place several taxa for which DNA was not available (Celiantha, Lagenanthus, Rogersonanthus, Roraimaea, Senaea, Sipapoantha, Zonanthus). Celiantha, Prepusa and Senaea together appear as the sister clade to the rest of Helieae. The remainder of Helieae is largely divided into two large subclades, the Macrocarpaea subclade and the Symbolanthus subclade. The first subclade includes Macrocarpaea, sister to Chorisepalum, Tochia, and Zonanthus. Irlbachia and Neblinantha are placed as sisters to the Symbolanthus subclade, which includes Aripuana, Calolisianthus, Chelonanthus, Helia, Lagenanthus, Lehmanniella, Purdieanthus, Rogersonanthus, Roraimaea, Sipapoantha, and symbolanthus. Generic-level polyphyly is detected in Chelonanthus and Irlbachia. Evolution of morphological characters is discussed, and new pollen and seed characters are evaluated for the first time in a combined morphological-molecular phylogenetic analysis.

Influence of Pigment and Opacifier on Dimensional Stability and Detail Reproduction of Maxillofacial Silicone Elastomer

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

In Vitro Evaluation of Surface Roughness and Microhardness of Restorative Materials Submitted to Erosive Challenges

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)