877 resultados para Didactic. Relationship. Autonomy. Process. Orientation
Resumo:
This work deals with teacher-student relationship (TSR), held in a very special moment: the semester of graduation of architecture and urbanism, where students prepare the final work called Graduation Final Work (GFW). That is the last stage to obtain the title of architect and urban planner in Brazil. The text discusses this problem in several ways, emphasing the relationship between graduated student and his/her mentors into the consolidation process of the student as an actor of the planning process, here defined as "autonomy". The work is focused on understanding the TSR in order to elucidate its importance for improvement of teaching bases on development of the GFW, more than the relation between curriculum and institution. Related with the exploratory characteristic of this master thesis, methodologically, the field work happened through: (i) observation of mentorship guidance, (ii) interviews, and (iii) application of questionnaires to teachers and students. Participated 10 pairs of student and mentors of two federal university of Northeast: 05 pairs of the Federal University of Ceará (UFC) and 05 pairs of the Federal University of Rio Grande do Norte (UFRN). The results presented the development of the GFW as a difficult process / fearful for students, highlighting the main problem situations: the difficulty in choosing the theme, the super-sizing of the process, students' insecurities, and parental relationship with the supervisor process. Summing up, the work indicates that the students has a limited autonomy on the GFW process, which calls for a revision in order to promote the consolidation of the student autonomy, which must be observed for some positions recognition of the role of each actor in the process of orientation
Resumo:
This work deals with teacher-student relationship (TSR), held in a very special moment: the semester of graduation of architecture and urbanism, where students prepare the final work called Graduation Final Work (GFW). That is the last stage to obtain the title of architect and urban planner in Brazil. The text discusses this problem in several ways, emphasing the relationship between graduated student and his/her mentors into the consolidation process of the student as an actor of the planning process, here defined as "autonomy". The work is focused on understanding the TSR in order to elucidate its importance for improvement of teaching bases on development of the GFW, more than the relation between curriculum and institution. Related with the exploratory characteristic of this master thesis, methodologically, the field work happened through: (i) observation of mentorship guidance, (ii) interviews, and (iii) application of questionnaires to teachers and students. Participated 10 pairs of student and mentors of two federal university of Northeast: 05 pairs of the Federal University of Ceará (UFC) and 05 pairs of the Federal University of Rio Grande do Norte (UFRN). The results presented the development of the GFW as a difficult process / fearful for students, highlighting the main problem situations: the difficulty in choosing the theme, the super-sizing of the process, students' insecurities, and parental relationship with the supervisor process. Summing up, the work indicates that the students has a limited autonomy on the GFW process, which calls for a revision in order to promote the consolidation of the student autonomy, which must be observed for some positions recognition of the role of each actor in the process of orientation
Resumo:
This work deals with teacher-student relationship (TSR), held in a very special moment: the semester of graduation of architecture and urbanism, where students prepare the final work called Graduation Final Work (GFW). That is the last stage to obtain the title of architect and urban planner in Brazil. The text discusses this problem in several ways, emphasing the relationship between graduated student and his/her mentors into the consolidation process of the student as an actor of the planning process, here defined as "autonomy". The work is focused on understanding the TSR in order to elucidate its importance for improvement of teaching bases on development of the GFW, more than the relation between curriculum and institution. Related with the exploratory characteristic of this master thesis, methodologically, the field work happened through: (i) observation of mentorship guidance, (ii) interviews, and (iii) application of questionnaires to teachers and students. Participated 10 pairs of student and mentors of two federal university of Northeast: 05 pairs of the Federal University of Ceará (UFC) and 05 pairs of the Federal University of Rio Grande do Norte (UFRN). The results presented the development of the GFW as a difficult process / fearful for students, highlighting the main problem situations: the difficulty in choosing the theme, the super-sizing of the process, students' insecurities, and parental relationship with the supervisor process. Summing up, the work indicates that the students has a limited autonomy on the GFW process, which calls for a revision in order to promote the consolidation of the student autonomy, which must be observed for some positions recognition of the role of each actor in the process of orientation
Resumo:
This study focuses on the managerial question “should social enterprises become more entrepreneurial?” It adapts the Covin and Slevin (1989) entrepreneurial orientation scale to measure the adoption of entrepreneurship by a social enterprise, and develops a scale that combines a Vincentian based focus to serve the poor with a propensity to take a more entrepreneurial approach toward business as a measure of a social value orientation (SVO).
Resumo:
Bone void fillers that can enhance biological function to augment skeletal repair have significant therapeutic potential in bone replacement surgery. This work focuses on the development of a unique microporous (0.5-10 mu m) marine-derived calcium phosphate bioceramic granule. It was prepared fro Corallina officinalis, a mineralized red alga, using a novel manufacturing process. This involved thermal processing, followed by a low pressure-temperature chemical synthesis reaction. The study found that the ability to maintain the unique algal morphology was dependent on the thermal processing conditions. This study investigates the effect of thermal heat treatment on the physiochemical properties of the alga. Thermogravimetric analysis was used to monitor its thermal decomposition. The resultant thermograms indicated the presence of a residual organic phase at temperatures below 500 degrees C and an irreversible solid-state phase transition from mg-rich-calcite to calcium oxide at temperatures over 850 degrees C. Algae and synthetic calcite were evaluated following heat treatment in an air-circulating furance at temperatures ranging from 400 to 800 degrees C. The highest levels of mass loss occurred between 400-500 degrees C and 700-800 degrees C, which were attributed to the organic and carbonate decomposition respectively. The changes in mechanical strength were quantified using a simple mechanical test, which measured the bulk compressive strength of the algae. The mechanical test used may provide a useful evaluation of the compressive properties of similar bone void fillers that are in granular form. The study concluded that soak temperatures in the range of 600 to 700 degrees C provided the optimum physiochemical properties as a precursor to conversion to hydroxyapatite (HA). At these temperatures, a partial phase transition to calcium oxide occurred and the original skeletal morphology of the alga remained intact.
Resumo:
Studies that have used mostly self-reported height have found that men with a same-sex orientation and women with an other-sex orientation are shorter, on average, than men with an other-sex orientation and women with a same-sex orientation, respectively. This thesis examined whether an objective height difference exists or whether a psychosocial account (e.g., distortion of self-reports) may explain these putative height differences. Also, this thesis examined whether certain individual differences (e.g, gender roles and socially desirable responding) predict height distortion. Eight hundred and thirteen participants, recruited at Brock University, the Niagara Community and through surrounding LGBT events, completed self-reported height, measures of gender roles and socially desirable responding, and had their height measured. Using hierarchical linear regressions, it was found that Same-Sex/Both-Sex Oriented men were shorter, on average, than predominantly Other-Sex Oriented men; however, there was no difference in objective height between Same-Sex/Both-Sex Oriented women and predominantly Other-Sex Oriented women. These findings contribute to existing biological theories of men's sexual orientation development and do not contribute to biological theories of women's sexual orientation development. Height distortion was not related to sexual orientation and only marginally related to sex. Predictors of height distortion were Impression Management, in both men and women, and Unmitigated Agency, in men. These findings highlight the complexity of sexual orientation development in men and women. These findings also highlight the role of certain psychosocial factors in how people perceive their bodies and/or how they want their bodies to be perceived by others.
Resumo:
This paper explores the possibility of combining moderate vacuum frying followed by post-frying high vacuum application during the oil drainage stage, with the aim to reduce oil content in potato chips. Potato slices were initially vacuum fried under two operating conditions (140 °C, 20 kPa and 162 °C, 50.67 kPa) until the moisture content reached 10 and 15 % (wet basis), prior to holding the samples in the head space under high vacuum level (1.33 kPa). This two-stage process was found to lower significantly the amount of oil taken up by potato chips by an amount as high as 48 %, compared to drainage at the same pressure as the frying pressure. Reducing the pressure value to 1.33 kPa reduced the water saturation temperature (11 °C), causing the product to continuously lose moisture during the course of drainage. Continuous release of water vapour prevented the occluded surface oil from penetrating into the product structure and released it from the surface of the product. When frying and drainage occurred at the same pressure, the temperature of the product fell below the water saturation temperature soon after it was lifted out of the oil, which resulted in the oil getting sucked into the product. Thus, lowering the pressure after frying to a value well below the frying pressure is a promising method to lower oil uptake by the product.
Resumo:
Heart valve prostheses are used to replace native heart valves which that are damaged because of congenital diseases or due to ageing. Biological prostheses made of bovine pericardium are similar to native valves and do not require any anticoagulation treatment, but are less durable than mechanical prostheses and usually fail by tearing. Researches are oriented in improving the resistance and durability of biological heart valve prostheses in order to increase their life expectancy. To understand the mechanical behaviour of bovine pericardium and relate it to its microstructure (mainly collagen fibres concentration and orientation) uniaxial tensile tests have been performed on a model material made of collagen fibres. Small Angle Light Scattering (SALS) has been also used to characterize the microstructure without damaging the material. Results with the model material allowed us to obtain the orientation of the fibres, relating the microstructure to mechanical performance
Resumo:
Xerox Customer Engagement activity is informed by the "Go To Market" strategy, and "Intelligent Coverage" sales philosophy. The realisation of this philosophy necessitates a sophisticated level of Market Understanding, and the effective integration of the direct channels of Customer Engagement. Sophisticated Market Understanding requires the mapping and coding of the entire UK market at the DMU (Decision Making Unit) level, which in turn enables the creation of tailored coverage prescriptions. Effective Channel Integration is made possible by the organisation of Customer Engagement work according to a single, process defined structure: the Selling Process. Organising by process facilitates the discipline of Task Substitution, which leads logically to creation of Hybrid Selling models. Productive Customer Engagement requires Selling Process specialisation by industry sector, customer segment and product group. The research shows that Xerox's Market Database (MDB) plays a central role in delivering the Go To Market strategic aims. It is a tool for knowledge based selling, enables productive SFA (Sales Force Automation) and, in sum, is critical to the efficient and effective deployment of Customer Engagement resources. Intelligent Coverage is not possible without the MDB. Analysis of the case evidence has resulted in the definition of 60 idiographic statements. These statements are about how Xerox organise and manage three direct channels of Customer Engagement: Face to Face, Telebusiness and Ebusiness. Xerox is shown to employ a process-oriented, IT-enabled, holistic approach to Customer Engagement productivity. The significance of the research is that it represents a detailed (perhaps unequalled) level of rich description of the interplay between IT and a holistic, process-oriented management philosophy.
Resumo:
A szerző kutatásában azt vizsgálja, hogy az értékesítés területén dolgozó munkatársak piaci megfigyeléseit milyen mértékben képesek beépíteni a marketingvezetők a menedzsmentmunkába. Az értékesítési munkatársak piaci megfigyelései mindig naprakészek, ráadásul jelentősebb ráfordítás nélkül hozzáférhetők. A marketing- és a sales munkatársak közötti hagyományosan konfliktusokkal terhelt kapcsolat miatt azonban a vállalatok sokszor mégsem aknázzák ki a piaci tájékozódásnak ezt a lehetőségét. A nagyvállalati mintán empirikusan tesztelt modell szerint a menedzserek azon képessége, hogy felhasználják a vállalaton belül rendelkezésre álló információkat, alapvetően nem egyéni, hanem szervezeti képesség. Azok a menedzserek, akik olyan cégeknél dolgoznak, ahol a vállalati továbbképzések során más részlegek munkájába is bekapcsolódhatnak, nagyobb mértékben támaszkodnak a munkatársak piaci megfigyeléseire döntéseik meghozatala során. _____ The author examines in her research that to what extent marketing leaders can build market experience of sales employees into the management activity. Because of the traditionally problematic relationship between marketing and sales employees, companies do not exploit this opportunity of market orientation. According to the model tested on a big corporation sample, the capacity of managers to use information available within the company is basically not an individual but organisational capacity.
Resumo:
This paper examines the impact of service orientation (SO) on relationship quality, and its consequences for consumer behaviour in the travel industry. Specifically consumers' positive behavioural intentions, perceptions of switching costs, and consumer activism are examined as consequences of relationship quality (RQ). A sample of leisure and business travellers on a cross sea ferry were surveyed using a consumer intercept methodology. We find that SO has a significant and positive impact on RQ and that RQ has a positive impact on positive behavioural intentions and perceptions of switching costs. Both RQ and switching costs were found to reduce consumer activism. The implications of these findings for service managers and academics are discussed and directions forfuture research presented.