Aiming for the management of the small hive beetle, Aethina tumida, using relative humidity and diatomaceous earth

Small hive beetles (SHBs) are a global pest of European honeybee colonies. In the laboratory, the survival of adult SHBs was evaluated in relation to relative humidity (RH = 56, 64, 73, 82 and 96 %) and treatment with diatomaceous earth (DE) across 4 days. Low RH reduced survival. The application of DE reduced survival in addition to RH. Adults treated with corn flour (control) showed no difference in survival from untreated beetles. Scanning electron microscopy images showed no scarification of adult beetle cuticle after exposure to DE; therefore, water loss is likely facilitated through non-abrasive means such as the adsorption of cuticular lipids. The data agree with the hypothesis that DE causes mortality through water loss from treated insects. Egress, ingress, mortality and the egg-laying behaviours of beetles were observed in relation to a popular in-hive trench trap with and without the addition of DE. Traps filled with DE resulted in 100 % mortality of beetles compared with 8.6 % mortality when no DE was present. A simple method for visually determining beetle sex was used and documented.

The removal of dyes from textile wastewater: a study of the physical characteristics and adsorption mechanisms of diatomaceous earth

The feasibility of using diatomite for the removal of the problematic reactive dyes as well as basic dyes from textile wastewater was investigated. Methylene blue, Cibacron reactive black and reactive yellow dyes were considered. Physical characteristics of diatomite such as pH(solution), pH(ZPC), surface area, Fourier transform infrared, and scanning electron microscopy were investigated. The surface area of diatomite was found to be 27.80 m(2) g(-1) and the pH(ZPC) occurred around pH of 5.4. The results indicated that the surface charge of diatomite decreased as the pH of the solution increased with the maximum methylene blue removal from aqueous solution occurring at basic pH of around (1011). Adsorption isotherms of diatomite with methylene blue, hydrolysed reactive black and yellow dyes were constructed at different pH values, initial dye concentrations and particle sizes. The experimental results were fitted to the Langmuir, Freundlich, and Henry models. The study indicated that electrostatic interactions play an important role in the adsorption of dyes onto diatomite. A model of the adsorption mechanism of methylene blue onto diatomite is proposed. (C) 2003 Elsevier Ltd. All rights reserved.

Does diatomaceous earth control leaf-cutter ants (Hymenoptera: Formicidae) in the Eucalyptus plantations?

Genus Atta includes some of the most important Formicidae leaf cutter ants which cause extensive damage to the eucalyptus plantations. Atta sexdens rubropilosa Forel, one of the chief pests in Brazilian reforestation, can restrict and reduce forest productivity by its intense and constant leaf-cutting activities on plants at all stages. Therefore, the demand for new products to control A. sexdens rubropilosa indicates the study of the utilization of the dry powder formulation of diatomaceous earth (DE) against this pest in the eucalyptus cultivars. The study was conducted using 120 colonies of A. sexdens rubropilosa in Eucalyptus grandis Hill ex. Maiden x Eucalyptus urophylla Blake (Myrtaceae) (urograndis) stand. The randomized block experimental design was used with six treatments (1, 10, 25, and 50 g/m2 of DE, 6.0 g/m2 sulfluramid bait per square meter of loose soil, and the control) with five replications, each with four colonies of this ant. Diatomaceous earth was applied to the active A. sexdens rubropilosa ant holes, and the sulfluramid bait was applied in bulk in a localized manner. The control efficacy of A. sexdens rubropilosa with DE was low, showing values similar to that of the control, and, for this reason, it cannot be used to control this ant. The bait with sulfluramid showed higher efficacy than those of the other treatments.

The mineral industry of the British empire and foreign countries. Statistics, 1919-1921. Diatomaceous earth.

At head of title: Imperial mineral resources bureau.

The mineral industry of the British Empire and foreign countries. Diatomaceous earth.

Bibliography: p. 51-55.

The mineral industry of the British empire and foreign countries. Statistics, 1920-1922. Diatomaceous earth.

At head of title: Imperial mineral resources bureau.

Genome sequencing of cells that live inside glass cages reveals their past history

One-quarter of the total primary production on earth is contributed by diatoms1. These are photosynthetic, unicellular algae with ornamented silica shells found in all aquatic and moist environments. They form the base of energy-efficient food webs that support all aquatic life forms. More than 250 genera of living diatoms, with as many as 100,000 species are known2. Fossil diatoms are known as early as the Cretaceous, 144–65 m.y. ago3. In India, deposits of diatoms occur in Rajasthan and are known as ‘multani mitti’. Multani mitti or Indian Fuller’s earth or diatomaceous earth as it is called in the West, is applied as a paste on the surface of the skin for 15–20 min and then washed-off. This leaves the skin feeling smooth, soft, moist and rejuvenated. Diatomaceous earth is now being used in the formulation of soaps, cleansing products, face powders and skincare preparations. Diatomaceous earth is a mineral material consisting mainly of siliceous fragments of various species of fossilized remains of diatoms.

Field Assessments of Control Agents for Lesser Mealworm (Coleoptera: Tenebrionidae) Using Litter Sampling

Spinosad, diatomaceous earth, and cyfluthrin were assessed on two broiler farms at Gleneagle and Gatton in southeastern Queensland, Australia in 2004-2005 and 2007-2009, respectively to determine their effectiveness in controlling lesser mealworm, Alphitobius diaperinus (Panzer) (Coleoptera: Tenebrionidae). Insecticide treatments were applied mostly to earth or 'hard' cement floors of broiler houses before the placement of new bedding. Efficacy of each agent was assessed by regular sampling of litter and counting of immature stages and adult beetles, and comparing insect counts in treatments to counts in untreated houses. Generally, the lowest numbers of lesser mealworm were recorded in the house with hard floors, these numbers equalling the most effective spinosad applications. The most effective treatment was a strategic application of spinosad under feed supply lines on a hard floor. In compacted earth floor houses, mean numbers of lesser mealworms for two under-feed-line spinosad treatments (i.e., 2-m-wide application at 0.18 g of active insecticide (g [AI]) in 100-ml water/m(2), and 1-m-wide application at 0.11 g ([AI] in 33-ml water/m(2)), and an entire floor spinosad treatment (0.07 g [AI] in 86-ml water/m2) were significantly lower (i.e., better control) than those numbers for cyfluthrin, and no treatment (controls). The 1-m-wide under-feed-line treatment was the most cost-effective dose, providing similar control to the other two most effective spinosad treatments, but using less than half the active component per broiler house. No efficacy was demonstrated when spinosad was applied to the surface of bedding in relatively large volumes of water. All applications of diatomaceous earth, applied with and without spinosad, and cyfluthrin at the label rate of 0.02 g (AI)/100-ml water/m(2) showed no effect, with insect counts not significantly different to untreated controls. Overall, the results of this field assessment indicate that cyfluthrin (the Australian industry standard) and diatomaceous earth were ineffective on these two farms and that spinosad can be a viable alternative for broiler house use.

Potential Application of Adsorptive Media to Enhance Phosphorus Uptake in Stormwater Basins and Wetlands at Lake Tahoe : literature review. Report to the University of California Davis Tahoe Research Group

Phosphorus removal by wetlands and basins in Lake Tahoe may be improved through designing these systems to filter storm water through media having higher phosphorus removal capabilities than local parent material. Substrates rich in iron, aluminum and calcium oftentimes have enhanced phosphorus removal. These substrates can be naturally occurring, byproducts of industrial or water treatment processes, or engineered. Phosphorus removal fundamentally occurs through chemical adsorption and/or precipitation and much of the phosphorus can be irreversibly bound. In addition to these standard media, other engineered substrates are available to enhance P removal. One such substrate is locally available in Reno and uses lanthanum coated diatomaceous earth for arsenate removal. This material, which has a high positive surface charge, can also irreversibly remove phosphorus. Physical factors also affect P removal. Specifically, specific surface area and particle shape affect filtration capacity, contact area between water and the surface area, and likelihood of clogging and blinding. A number of substrates have been shown to effectively remove P in case studies. Based upon these studies, promising substrates include WTRs, blast furnace slag, steel furnace slag, OPC, calcite, marble Utelite and other LWAs, zeolite and shale. However, other nonperformance factors such as environmental considerations, application logistics, costs, and potential for cementification narrow the list of possible media for application at Tahoe. Industrial byproducts such as slags risk possible leaching of heavy metals and this potential cannot be easily predicted. Fly ash and other fine particle substrates would be more difficult to apply because they would need to be blended, making them less desirable and more costly to apply than larger diameter media. High transportation costs rule out non-local products. Finally, amorphous calcium products will eventually cementify reducing their effectiveness in filtration systems. Based upon these considerations, bauxite, LWAs and expanded shales/clays, iron-rich sands, activated alumina, marble and dolomite, and natural and lanthanum activated diatomaceous earth are the products most likely to be tested for application at Tahoe. These materials are typically iron, calcium or aluminum based; many have a high specific surface area; and all have low transportation costs. (PDF contains 21 pages)

Kinetics and mechanisms of adsorption of Escherichia coli bacteriophage T_4 to activated carbon

A study was conducted on the adsorption of Escherichia coli bacteriophage T₄ to activated carbon. Preliminary adsorption experiments were also made with poliovirus Type III. The effectiveness of such adsorbents as diatomaceous earth, Ottawa sand, and coconut charcoal was also tested for virus adsorption.

The kinetics of adsorption were studied in an agitated solution containing virus and carbon. The mechanism of attachment and site characteristics were investigated by varying pH and ionic strength and using site-blocking reagents.

Plaque assay procedures were developed for bacteriophage T₄ on Escherichia coli cells and poliovirus Type III on monkey kidney cells. Factors influencing the efficiency of plaque formation were investigated.

The kinetics of bacteriophage T₄ adsorption to activated carbon can be described by a reversible second-order equation. The reaction order was first order with respect to both virus and carbon concentration. This kinetic representation, however, is probably incorrect at optimum adsorption conditions, which occurred at a pH of 7.0 and ionic strength of 0.08. At optimum conditions the adsorption rate was satisfactorily described by a diffusion-limited process. Interpretation of adsorption data by a development of the diffusion equation for Langmuir adsorption yielded a diffusion coefficient of 12 X 10^-8 cm²/sec for bacteriophage T₄. This diffusion coefficient is in excellent agreement with the accepted value of 8 X 10^-8 cm²/sec. A diffusion-limited theory may also represent adsorption at conditions other than the maximal. A clear conclusion on the limiting process cannot be made.

Adsorption of bacteriophage T₄ to activated carbon obeys the Langmuir isotherm and is thermodynamically reversible. Thus virus is not inactivated by adsorption. Adsorption is unimolecular with very inefficient use of the available carbon surface area. The virus is probably completely excluded from pores due to its size.

Adsorption is of a physical nature and independent of temperature. Attraction is due to electrostatic forces between the virus and carbon. Effects of pH and ionic strength indicated that carboxyl groups, amino groups, and the virus's tail fibers are involved in the attachment of virus to carbon. The active sites on activated carbon for adsorption of bacteriophage T₄ are carboxyl groups. Adsorption can be completely blocked by esterifying these groups.

Estudo de viabilidade técnica, econômica e ambiental preliminar da aplicação da tecnologia de Tratamento Térmico de Resíduos e Materiais Multifásicos-TTRM a resíduos de terra diatomácea de usina genérica de produção de biodiesel.

O cenário mundial de matriz energética apresenta dados crescentes de contribuição das energias renováveis. No Brasil, o governo tem realizado esforços para aumento da parcela de combustíveis renováveis, e com isso isso também para o aumento da produção de biodiesel. O principal processo de fabricação de biodiesel com seu polimento em via seca gera quantidades significativas de resíduos, dentre eles, o resíduo de terra diatomácea, com potenciais características de inflamabilidade. Em contrapartida existe a Política Nacional de Resíduos Sólidos com objetivos de não geração, redução, reutilização, reciclagem e redução de periculosidade dos resíduos, e envio para aterro somente de resíduos sem qualquer possibilidade viável de tratamento. O presente trabalho objetiva realizar um estudo de viabilidade técnica, econômica e ambiental preliminar da aplicação da tecnologia de Tratamento Térmico de Resíduos e Materiais Multifásicos - TTRM a resíduo de terra diatomácea - RTD de usina genérica de biodiesel. Foram utilizados como base para o estudo: os resultados dos testes da PETROBRAS e da ALBRECHT realizados em escala de bancada de laboratório e em planta piloto que simularam a aplicação do TTRM ao RTD; premissas técnicas; premissas operacionais; e dados econômicos de referência. Foram estabelecidos cenários específicos para o estudo da aplicabilidade e realizada análise de sensibilidade para os principais fatores da composição dos custos. Observou-se para este estudo preliminar que: na dimensão técnica o TTRM demonstrou ser aplicável; na dimensão econômica, os indicadores são positivos em sua totalidade no cenário esperado, mesmo após análise de sensibilidade com variações de 25% dos principais parâmetros de entrada do estudo de viabilidade; na dimensão ambiental o TTRM demonstrou ser uma alternativa que incorpora os conceitos para uma gestão alinhada com a Política Nacional de Resíduos Sólidos, seja na redução da periculosidade do resíduo, na potencial minimização da geração dos resíduos ou no reuso e reaproveitamento resíduos.

Determination of 266 pesticide residues in apple juice by matrix solid-phase dispersion and gas chromatography-mass selective detection

A macro matrix solid-phase dispersion (MSPD) method was developed to extract 266 pesticides from apple juice samples prior to gas chromatography-mass selective detection (GC-MSD) determination. A 10 g samples was mixed with 20 g diatomaceous earth. The mixture was transferred into a glass column. Pesticide residues were leached with a 160 mL hexane-dichloromethane (1:1) at 5 mL/min. Two hundred and sixty-six pesticides were divided into three groups and detected by GC-MSD under selective ion monitoring. The proposed method takes advantage of both liquid-liquid extraction and conventional MSPD methods. Application was illustrated by the analysis of 236 apple juice samples produced in Shaanxi province China mainland this year. (C) 2004 Elsevier B.V. All rights reserved.

Exposición acumulada de polvo respirable como predictor de enfermedad respiratoria

En la minería de carbón se presenta exposición prolongada a polvo de carbón y a polvo de sílice en diferentes porcentajes, encontrándose una asociación con las alteraciones obstructivas, bronquitis crónica, Neumoconiosis de los trabajadores de carbón y Silicosis. Se han establecido varias formas de estimar el riesgo de desarrollar dichas enfermedades respiratorias no malignas secundarias a la exposición a estos polvos (carbón y sílice) en el ámbito ocupacional, siendo el cálculo de la exposición acumulada, la que ha demostrado mayor utilidad. Con el fin de establecer el riesgo de desarrollar alteraciones funcionales, a partir de la exposición acumulada de polvo respirable - y en los trabajadores de una empresa de minería a cielo abierto en Colombia, se estructuró este estudio de cohorte. Se contó con el registro de 566 trabajadores distribuidos en 29 Grupos de Exposición Similar (GES). El cálculo de la dosis acumulada se realizó considerando las medianas de exposición para cada GES y el tiempo de exposición de cada trabajador. Y posteriormente se estimó el riesgo empleando una regresión de poisson con varianza robusta. Los resultados más importantes del estudio muestran la exposición acumulada en niveles inferiores a los reportados en la literatura, sin embargo se encuentra un riesgo ligeramente elevado, IRR 1.000124 (IC95% 1 - 1.000248) en los expuestos, estimando que por cada unidad de medición de la exposición acumulada que se incremente, el riesgo de que aparezca una alteración respiratoria funcional se incrementa en 1.000124 veces entre los trabajadores expuestos y los no expuestos.

Síntese e caracterização de peneiras moleculares mesoporosas do tipo MCM-41 e AlMCM-41 a partir de fontes alternativas de sílica e de alumínio

The mesoporous molecular sieves of MCM-41 and AlMCM-41 type are considered as promising support for metal in the refining processes of petroleum-based materials as catalysts and adsorbents for environmental protection. In this work the molecular sieves MCM-41 and AlMCM-41 were synthesized by replacing the source of silica conventionally used, for quartz, an alternative and abundant, and the use of waste from the production of diatomaceous earth, an aluminum-silicate, as a source aluminum, due to abundant reserves of diatomaceous earth in the state of Rio Grande do Norte in the city of Ceará-Mirim, with the objective of producing high-value materials that have similar characteristics to traditional commercial catalysts in the market. These materials were synthesized by the method of hydrothermal synthesis at 100 º C for 7 days and subjected to calcination at 500 º C for 2 hours under flow of nitrogen and air. The molecular sieves were characterized by X-ray diffraction (XRD), differential thermal analysis (DTA) and thermogravimetric analysis (TG), adsorption of N2 (BET and BJH methods), spectroscopy in the infra red (FTIR), microscopy scanning electron (SEM) and transmission electron microscopy (TEM). The analysis indicated that the synthesized materials showed characteristic hexagonal structure of mesopores materials with high specific surface area and sort and narrow distribution of size of pores

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry