Effects of light quantity and quality on early seedling development in the red mangrove Rhizophora mangle L

Seedlings of the red mangrove, Rhizophora mangle L., were grown under light conditions differing in both photosynthetic photon flux density (PPFD) and spectral quality (red:far-red ratio, R:FR). During the first 8 mo of development, parameters of stem, leaf, and root growth were affected by PPFD. Significant responses to lowered R:FR, however, were limited to internode extension. The results are moderately indicative of a strategy to persist in shade, but illustrate the complexity of light responses and suggest that precise categorization as shade-tolerant or -intolerant may be unbefitting for this species at this particular stage of development.

Crescimento de crambe na presença ou ausência de competição interespecífica

RESUMOCrambe (Crambe abyssinica) has a cropping cycle of around 90 days, being suitable as an alternative to the second grain crop planted after soybean is harvested in the Center West region of Brazil. It is necessary to understand the growth and development dynamics of crambe plants in order to allow correct management of the production factors. This study aimed to describe the growth and development parameters of crambe plants under presence or absence of interspecific competition. The experiment was installed in the fall-winter 2011 in an Oxisoil, in completely randomized blocks design with three replications. Treatments comprised crambe plants growing either in presence or absence of interspecific simulated competition, throughout the cropping cycle. Plants were collected for the growth analysis every 15 days from harvest until 75 days after emergence. Growth parameters leaf area (AF), dry mass of stems/culms (MSC), leaves (MSF) and total (MST) dry mass, leaf area index (IAF), absolute (TCA) and relative (TCR) growth rates, net assimilation rate (TAL), specific leaf area (AFE), leaf area duration (DAF), leaf area ratio (RAF) and leaf mass ratio (RMF) were determined for the crop plants, subjected or not to competition, as well as for the simulated competitor. Crambe is a low competitive crop, being the competition more severe until 60-70 days after emergence. Besides, crop performance under field conditions was properly described by the net assimilation rate (TAL), which is also affected by the leaf area duration (DAF) and leaf mass ratio (RMF).

Effect of temperature and prey in the biology of Scymnus subvillosus (Goeze) (Coleoptera: Coccinellidae)

Dissertação de Mestrado, Biotecnologia em Controlo Biológico, 18 de Dezembro de 2013, Universidade dos Açores.

Resistance inducing agents on the biology and probing behaviour of the greenbug in wheat

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Silagem ácida de resíduos da filetagem de tilápias em dietas de alevinos de piauçu Leporinus macrocephalus

Pós-graduação em Aquicultura - FCAV

Socialização de professoras em atividades de educação continuada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Crescimento de bulbos de calla cultivados em substrato em função do nível freático

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Produtividade da Alface (lactuca Sativa L.) em Função dos Valores de Lâminas de Água Aplicados por Gotejamento Superficial e Subsuperficial

A cultura da alface é extremamente exigente em água, sendo bastante recomendável a utilização de irrigação por gotejamento, pois neste método é mais fácil se controlar o teor de água no solo próximo a capacidade de campo. Com a evolução das características hidráulicas dos emissores, vem se intensificando cada vez mais o uso do gotejamento abaixo da superfície do solo (gotejamento subsuperficial), com a alegação de se obter algumas vantagens sobre a forma tradicional (gotejamento superficial), como por exemplo a possibilidade de maior vida útil do equipamento e maior eficiência de uso da água. Almejando esta segunda possibilidade, buscou-se no presente trabalho comparar parâmetros de produtividade da cultura da alface submetida a diferentes lâminas de irrigação através de gotejamento superficial e subsuperficial. A alface foi cultivada em um túnel alto, na Fazenda Experimental São Manuel, da Faculdade Ciências Agronômicas, Universidade Estadual Paulista, Campus de Botucatu, localizada no município de São Manuel. Instalou-se no centro do túnel um tanque Classe A que serviu de base para reposição das lâminas de irrigação. Estas lâminas foram equivalentes a 25%, 50%, 75% e 100% da evaporação do tanque Classe A no intervalo entre duas irrigações, que foi igual a três dias. Entre os parâmetros estudados, as duas menores lâminas de irrigação (25% e 50%) responderam melhor ao gotejamento subsuperficial. Os melhores resultados obtidos, tanto no gotejamento superficial como no subsuperficial, se deu através do manejo que utilizou uma reposição de lâmina igual a 100% da evaporação do tanque Classe A.

Injeção de colecalciferol in ovo e adição de alendronato de sódio na dieta hídrica para frangos de corte

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Improving the management of water and nitrogen resources in cropping systems by using simulation models

Los modelos de simulación de cultivos permiten analizar varias combinaciones de laboreo-rotación y explorar escenarios de manejo. El modelo DSSAT fue evaluado bajo condiciones de secano en un experimento de campo de 16 años en la semiárida España central. Se evaluó el efecto del sistema de laboreo y las rotaciones basadas en cereales de invierno, en el rendimiento del cultivo y la calidad del suelo. Los modelos CERES y CROPGRO se utilizaron para simular el crecimiento y rendimiento del cultivo, mientras que el modelo DSSAT CENTURY se utilizó en las simulaciones de SOC y SN. Tanto las observaciones de campo como las simulaciones con CERES-Barley, mostraron que el rendimiento en grano de la cebada era mas bajo para el cereal continuo (BB) que para las rotaciones de veza (VB) y barbecho (FB) en ambos sistemas de laboreo. El modelo predijo más nitrógeno disponible en el laboreo convencional (CT) que en el no laboreo (NT) conduciendo a un mayor rendimiento en el CT. El SOC y el SN en la capa superficial del suelo, fueron mayores en NT que en CT, y disminuyeron con la profundidad en los valores tanto observados como simulados. Las mejores combinaciones para las condiciones de secano estudiadas fueron CT-VB y CT-FB, pero CT presentó menor contenido en SN y SOC que NT. El efecto beneficioso del NT en SOC y SN bajo condiciones Mediterráneas semiáridas puede ser identificado por observaciones de campo y por simulaciones de modelos de cultivos. La simulación del balance de agua en sistemas de cultivo es una herramienta útil para estudiar como el agua puede ser utilizado eficientemente. La comparación del balance de agua de DSSAT , con una simple aproximación “tipping bucket”, con el modelo WAVE más mecanicista, el cual integra la ecuación de Richard , es un potente método para valorar el funcionamiento del modelo. Los parámetros de suelo fueron calibrados usando el método de optimización global Simulated Annealing (SA). Un lisímetro continuo de pesada en suelo desnudo suministró los valores observados de drenaje y evapotranspiración (ET) mientras que el contenido de agua en el suelo (SW) fue suministrado por sensores de capacitancia. Ambos modelos funcionaron bien después de la optimización de los parámetros de suelo con SA, simulando el balance de agua en el suelo para el período de calibración. Para el período de validación, los modelos optimizados predijeron bien el contenido de agua en el suelo y la evaporación del suelo a lo largo del tiempo. Sin embargo, el drenaje fue predicho mejor con WAVE que con DSSAT, el cual presentó mayores errores en los valores acumulados. Esto podría ser debido a la naturaleza mecanicista de WAVE frente a la naturaleza más funcional de DSSAT. Los buenos resultados de WAVE indican que, después de la calibración, este puede ser utilizado como "benchmark" para otros modelos para periodos en los que no haya medidas de campo del drenaje. El funcionamiento de DSSAT-CENTURY en la simulación de SOC y N depende fuertemente del proceso de inicialización. Se propuso como método alternativo (Met.2) la inicialización de las fracciones de SOC a partir de medidas de mineralización aparente del suelo (Napmin). El Met.2 se comparó con el método de inicialización de Basso et al. (2011) (Met.1), aplicando ambos métodos a un experimento de campo de 4 años en un área en regadío de España central. Nmin y Napmin fueron sobreestimados con el Met.1, ya que la fracción estable obtenida (SOC3) en las capas superficiales del suelo fue más baja que con Met.2. El N lixiviado simulado fue similar en los dos métodos, con buenos resultados en los tratamientos de barbecho y cebada. El Met.1 subestimó el SOC en la capa superficial del suelo cuando se comparó con una serie observada de 12 años. El crecimiento y rendimiento del cultivo fueron adecuadamente simulados con ambos métodos, pero el N en la parte aérea de la planta y en el grano fueron sobreestimados con el Met.1. Los resultados variaron significativamente con las fracciones iniciales de SOC, resaltando la importancia del método de inicialización. El Met.2 ofrece una alternativa para la inicialización del modelo CENTURY, mejorando la simulación de procesos de N en el suelo. La continua emergencia de nuevas variedades de híbridos modernos de maíz limita la aplicación de modelos de simulación de cultivos, ya que estos nuevos híbridos necesitan ser calibrados en el campo para ser adecuados para su uso en los modelos. El desarrollo de relaciones basadas en la duración del ciclo, simplificaría los requerimientos de calibración facilitando la rápida incorporación de nuevos cultivares en DSSAT. Seis híbridos de maiz (FAO 300 hasta FAO 700) fueron cultivados en un experimento de campo de dos años en un área semiárida de regadío en España central. Los coeficientes genéticos fueron obtenidos secuencialmente, comenzando con los parámetros de desarrollo fenológico (P1, P2, P5 and PHINT), seguido de los parámetros de crecimiento del cultivo (G2 and G3). Se continuó el procedimiento hasta que la salida de las simulaciones estuvo en concordancia con las observaciones fenológicas de campo. Después de la calibración, los parámetros simulados se ajustaron bien a los parámetros observados, con bajos RMSE en todos los casos. Los P1 y P5 calibrados, incrementaron con la duración del ciclo. P1 fue una función lineal del tiempo térmico (TT) desde emergencia hasta floración y P5 estuvo linealmente relacionada con el TT desde floración a madurez. No hubo diferencias significativas en PHINT entre híbridos de FAO-500 a 700 , ya que tuvieron un número de hojas similar. Como los coeficientes fenológicos estuvieron directamente relacionados con la duración del ciclo, sería posible desarrollar rangos y correlaciones que permitan estimar dichos coeficientes a partir de la clasificación del ciclo. ABSTRACT Crop simulation models allow analyzing various tillage-rotation combinations and exploring management scenarios. DSSAT model was tested under rainfed conditions in a 16-year field experiment in semiarid central Spain. The effect of tillage system and winter cereal-based rotations on the crop yield and soil quality was evaluated. The CERES and CROPGRO models were used to simulate crop growth and yield, while the DSSAT CENTURY was used in the SOC and SN simulations. Both field observations and CERES-Barley simulations, showed that barley grain yield was lower for continuous cereal (BB) than for vetch (VB) and fallow (FB) rotations for both tillage systems. The model predicted higher nitrogen availability in the conventional tillage (CT) than in the no tillage (NT) leading to a higher yield in the CT. The SOC and SN in the top layer, were higher in NT than in CT, and decreased with depth in both simulated and observed values. The best combinations for the dry land conditions studied were CT-VB and CT-FB, but CT presented lower SN and SOC content than NT. The beneficial effect of NT on SOC and SN under semiarid Mediterranean conditions can be identified by field observations and by crop model simulations. The simulation of the water balance in cropping systems is a useful tool to study how water can be used efficiently. The comparison of DSSAT soil water balance, with a simpler “tipping bucket” approach, with the more mechanistic WAVE model, which integrates Richard’s equation, is a powerful method to assess model performance. The soil parameters were calibrated by using the Simulated Annealing (SA) global optimizing method. A continuous weighing lysimeter in a bare fallow provided the observed values of drainage and evapotranspiration (ET) while soil water content (SW) was supplied by capacitance sensors. Both models performed well after optimizing soil parameters with SA, simulating the soil water balance components for the calibrated period. For the validation period, the optimized models predicted well soil water content and soil evaporation over time. However, drainage was predicted better by WAVE than by DSSAT, which presented larger errors in the cumulative values. That could be due to the mechanistic nature of WAVE against the more functional nature of DSSAT. The good results from WAVE indicate that, after calibration, it could be used as benchmark for other models for periods when no drainage field measurements are available. The performance of DSSAT-CENTURY when simulating SOC and N strongly depends on the initialization process. Initialization of the SOC pools from apparent soil N mineralization (Napmin) measurements was proposed as alternative method (Met.2). Method 2 was compared to the Basso et al. (2011) initialization method (Met.1), by applying both methods to a 4-year field experiment in a irrigated area of central Spain. Nmin and Napmin were overestimated by Met.1, since the obtained stable pool (SOC3) in the upper layers was lower than from Met.2. Simulated N leaching was similar for both methods, with good results in fallow and barley treatments. Method 1 underestimated topsoil SOC when compared with a 12-year observed serial. Crop growth and yield were properly simulated by both methods, but N in shoots and grain were overestimated by Met.1. Results varied significantly with the initial SOC pools, highlighting the importance of the initialization procedure. Method 2 offers an alternative to initialize the CENTURY model, enhancing the simulation of soil N processes. The continuous emergence of new varieties of modern maize hybrids limits the application of crop simulation models, since these new hybrids should be calibrated in the field to be suitable for model use. The development of relationships based on the cycle duration, would simplify the calibration requirements facilitating the rapid incorporation of new cultivars into DSSAT. Six maize hybrids (FAO 300 through FAO 700) were grown in a 2-year field experiment in a semiarid irrigated area of central Spain. Genetic coefficients were obtained sequentially, starting with the phenological development parameters (P1, P2, P5 and PHINT), followed by the crop growth parameters (G2 and G3). The procedure was continued until the simulated outputs were in good agreement with the field phenological observations. After calibration, simulated parameters matched observed parameters well, with low RMSE in most cases. The calibrated P1 and P5 increased with the duration of the cycle. P1 was a linear function of the thermal time (TT) from emergence to silking and P5 was linearly related with the TT from silking to maturity . There were no significant differences in PHINT between hybrids from FAO-500 to 700 , as they had similar leaf number. Since phenological coefficients were directly related with the cycle duration, it would be possible to develop ranges and correlations which allow to estimate such coefficients from the cycle classification.

Un nuevo equipamiento territorial : los parques comerciales : criterios y parámetros de diseño : análisis de la experiencia española

La revolución industrial, en todas sus etapas, supuso un cambio que afectó de lleno a la actividad comercial en la ciudad, produciéndose paulatinamente, una separación radical entre los lugares de producción de bienes manufacturados y los de intercambio. Estos últimos, van especializándose, desde las primeras agrupaciones de comercios en pequeños mercados, hasta una de las formas más evolucionadas de superficie comercial en la actualidad, los Parques Comerciales. En base a que actualmente, no hay estudios concluyentes sobre la manera de abordar estos nuevos espacios, se ha considerado el estudio de 17 Parques Comerciales representativos españoles, de este se han obtenido datos según su planeamiento, de los cuales se ha postulado una división de los Parques Comerciales en los que tienen ordenación exclusiva y los que se han desarrollado sin ordenación exclusiva, de la misma manera, se han dividido cada uno de ellos en los que se considera parcela de aparcamiento y en los que la parcela de aparcamiento está incluida en la parcela a edificar, de este manera se han obtenido unos parámetros de dimensionamiento representativos para cada uno de los casos considerados, que van a servir de orientación para el responsable de futuros planeamientos, tales como usos, parámetros de ordenación, distribución urbanística, aparcamientos, etc. También se realiza una clasificación de los Parques Comerciales en función de las dimensiones de las "medianas comerciales" que los corforman. La Tesis postula una nueva definición de Parque Comercial más completa y adaptada a la importancia de este formato comercial, así como unas recomendaciones para su diseño y desarrollo en base a los parámetros urbanísticos obtenidos. Se desarrolla en la Tesis el horizonte previsible de los Parques Comerciales y las posibles nuevas líenas de investigación. The industrial revolution, in all its stages, marked a change that would have a major impact on commercial activity in cities, gradually producing a radical separation between the production sites of manufacturated goods and those of trading goods. The latter are becoming increasingly specialized, from the first trade associations in small markets, up to what is now one of the most highly evolved forms of retail spaces, the Commercial Parks. On the grounds that there are currently no conclusive studies on the manner in which to address these new spaces, a study of 17 prominent Spanish Commercial Parks has been considered, from which data has been obtained based on the way in which they were planned. It has been proposed that these Commercial Parks be divided into those that have been developed without exclusive planning. Likewise, each of these has been divided into those considered as parking lots and those in which the parking area is included in the building plot. In this manner, representative sizing parameters have been obtained for each of the cases considered, which will act as guidelines for the person in charge of future proposals, such as uses, development parameters, town planning, parking, etc. The Commercial Parks have also been classified according to the sizes of the "mid-sized stores" that comprise them. The Thesis proposes a new definition of the Commercial Park, which is more comprehensive and better adapted to the importance of this commercial format, as well as recommendations for design and development based on the urban planning parameters obtained. The Thesis explores the foresseable horizon of Commercial Parks and potential new lines of research.

Effects of isoflavone-supplemented soy yogurt on lipid parameters and atherosclerosis development in hypercholesterolemic rabbits: a randomized double-blind study

Background: There is increasing interest in natural treatments to control dyslipidemia and reduce the risk of cardiovascular disease. Previous studies have demonstrated the beneficial effects of soy yogurt fermented with Enterococcus faecium CRL 183 and of dietary isoflavones on the lipid profile. The purpose of the present study was to investigate the effects of isoflavone-supplemented soy yogurt, fermented with E. faecium CRL183, on lipid parameters and atherosclerosis development in rabbits with induced hypercholesterolemia. Methods: Forty-eight rabbits were randomly assigned to eight groups fed on the following diets for 60 days: C - control; IY - isoflavone-supplemented soy yogurt; H - hypercholesterolemic (1.0% cholesterol wt/wt diet); HY - hypercholesterolemic plus soy yogurt; HIY - hypercholesterolemic plus isoflavone-supplemented soy yogurt; HP - hypercholesterolemic plus placebo; HI hypercholesterolemic plus isoflavone and HE - hypercholesterolemic plus pure culture of E. faecium CRL 183. Serum lipids and autoantibodies against oxLDL (oxLDL Ab) were analyzed on days 0, 30 and 60 of the treatment and the atherosclerotic lesions were quantified at the end of the experiment. Results: Soy yogurt, soy yogurt supplemented with isoflavones and placebo promoted significant reductions in total cholesterol level (38.1%, 27.0% and 26.6%, respectively). Significant increases in serum HDL-C concentration relative to group H were detected in animals that ingested soy yogurt, with or without the isoflavone supplement (55.2%), E. faecium culture (43.3%) or placebo (35.8%). Intake of soy yogurt and soy yogurt supplemented with isoflavones prevented the rise of oxLDL Ab during the study period. The extent of atherosclerosis in the thoracic and abdominal aortas was reduced in the HIY, HY and HP groups. However, when the whole aorta was analyzed, animals treated with soy yogurt supplemented with isoflavones exhibited the greatest reduction (51.4%, P < 0.05) in atherosclerotic lesion area, compared to group H. Conclusion: Soy yogurt could be consumed as an alternative means of reducing the risk of cardiovascular disease by improving the lipid profile and inhibiting oxLDL Ab formation. Our findings also suggest that isoflavone supplementation may enhance the antiatherosclerotic effect of soy yogurt.

The relationship between stem vessel parameters and the development of strata in the early stages of secondary forest succession in Amazonia

In order to compare the development of strata in the early stages of secondary forest succession with vessel parameters of the tree species, a forest inventory was carried out in 4-year (Q1: 48 m2), 11-year (Q2: 400 m2) and 20-year (Q3: 400 m2) forests and vessel parameters were investigated from stem cross sections of 18 species obtained in Q2. Thirty three species (21 families), 77 species (35 families), 39 species (20 families) were found in Ql, Q2, Q3, respectively. The percentage of dead individuals, dead stems and the percentage of individuals with multiple stems increased with time after clear cutting. Also, the total D2H of Q3 was 26.1 times that of Q1, and the development of strata started in Q2 and Q3. The image analysis of vessel size, area and number of vessels revealed that species which reach the forest canopy had a large D2H value, vessel diameter and area, while species which remain near the forest floor had smaller ones. Poecilanthe effusa (Huber) Ducke is an example of the latter case, with a large number of individuals and abundant sprouting of new stems from stumps, but with high mortality.

Compared nymphal development of Tingis americana (Hemiptera, Tingidae) in two Handroanthus species (Bignoniaceae) and reproductive parameters in seedlings of Handroanthus heptaphyllus

Nymphs and adults of Tingis americana Drake, 1922 were found feeding on leaves of Handroanthus heptaphyllus (Vell.) Mattos and Handroanthus chrysotrichus (Mart. ex A. DC.) Mattos in the Botanic Garden, Porto Alegre, state of Rio Grande do Sul, Brazil. This is the first record of T. americana on these host plants and in the southern Brazil. We aimed to compare the nymphal development on both hosts and to analyze the reproductive parameters on H. heptaphyllus (25 ± 1ºC; 60 ± 10% RH; 16 h photophase). The mean nymphal period (days) was shorter in individuals reared on H. heptaphyllus (12.69 ± 0.076) than on H. chrysotrichus (19.11 ± 0.208) (P < 0.0001), however, nymph viability was similar. On H. heptaphyllus, the mean embryonic period lasted 12.32 ± 0.274 days and the egg viability was 92%. The mean total and daily fecundity were 310.0 ± 19.40 eggs/female and 7.46 ± 0.302 eggs/female/day, respectively. Paired males and females showed similar longevity (P = 0.0691), while unpaired females lived longer than unpaired males (P = 0.0460).

Minimal requirements for parameters to be used for the development of predictive models for microbial source tracking. The example of the pair somatic coliphages and phages infecting Bacteroides

Several methods and approaches for measuring parameters to determine fecal sources of pollution in water have been developed in recent years. No single microbial or chemical parameter has proved sufficient to determine the source of fecal pollution. Combinations of parameters involving at least one discriminating indicator and one universal fecal indicator offer the most promising solutions for qualitative and quantitative analyses. The universal (nondiscriminating) fecal indicator provides quantitative information regarding the fecal load. The discriminating indicator contributes to the identification of a specific source. The relative values of the parameters derived from both kinds of indicators could provide information regarding the contribution to the total fecal load from each origin. It is also essential that both parameters characteristically persist in the environment for similar periods. Numerical analysis, such as inductive learning methods, could be used to select the most suitable and the lowest number of parameters to develop predictive models. These combinations of parameters provide information on factors affecting the models, such as dilution, specific types of animal source, persistence of microbial tracers, and complex mixtures from different sources. The combined use of the enumeration of somatic coliphages and the enumeration of Bacteroides-phages using different host specific strains (one from humans and another from pigs), both selected using the suggested approach, provides a feasible model for quantitative and qualitative analyses of fecal source identification.