Impacts of concurrency, iteration, design review, and problem complexity on design project lead time and error generation

A case study of an aircraft engine manufacturer is used to analyze the effects of management levers on the lead time and design errors generated in an iteration-intensive concurrent engineering process. The levers considered are amount of design-space exploration iteration, degree of process concurrency, and timing of design reviews. Simulation is used to show how the ideal combination of these levers can vary with changes in design problem complexity, which can increase, for instance, when novel technology is incorporated in a design. Results confirm that it is important to consider multiple iteration-influencing factors and their interdependencies to understand concurrent processes, because the factors can interact with confounding effects. The article also demonstrates a new approach to derive a system dynamics model from a process task network. The new approach could be applied to analyze other concurrent engineering scenarios. © The Author(s) 2012.

From Process to Product: An Analysis of Seattle's Design Review Program

Thesis (Master's)--University of Washington, 2016-06

Common Ground: Building A Better Seattle Through an Improved Democratization of The City’s Design Review Process

Thesis (Master's)--University of Washington, 2016-06

Expanded review criteria : the case of nonpharmacological interventions in dementia

This paper challenges the assumptions underlying many reviews and offers alternative criteria for examining evidence for nonpharmacological interventions. We evaluated 27 reviews examining interventions for persons with dementia as they relate to the issues of selection based on randomized controlled trial (RCT) design. Reviews were described by type of intervention, level of cognitive function, and criteria for inclusion. Of the 27 reviews, 46% required RCTs for inclusion and most had stringent inclusion criteria. This resulted in poor utilization of the literature and low ecological validity. Eliminating most of the available data poses a critical problem to clinical and research development. Studies meeting strict methodological criteria may not generalize to the greater population or may exclude sub-populations and interventions. Limitations of double-blind RCTs and potential design solutions are set forth based on appropriate populations, problems, interventions, and settings characteristics.

Hertzian Tales: Electronic Products, Aesthetic Experience, and Critical Design

Anthony Dunne’s Hertzian Tales is an exploration of the aesthetic and conceptual aspects of industrial design and its potential to bring about social change for the users of electronic objects. It is a provoking and – to first-time readers – positively alarming social commentary on the interrelationship between electronic product design and culture, and the powerful but largely under-explored potential of electronic innovation to trigger social awareness. Hertzian Tales proposes an innovative approach to critical design and therefore serves as a reflection on and a critique of the commercial design practices at large. In this second edition, Dunne reiterates the original rationale for his project: a concern that the majority of industrial designers have unwittingly joined a treadmill culture of post-industrial mass-production – turning out electronic goods that have long simply met the brief of an optimally functioning and eagerly consumable technology.

Roundabout design guidelines and cycling safety

Review conducted as part of a Queensland Department of Transport and Main Roads funded project ‘Roundabout design review’. The project examined: - Design guidelines - Factors that affect safety at roundabouts

Assessment of evaluations made to healthy eating policies in Europe: a review within the EATWELL Project

Objective: To identify and assess healthy eating policies at national level which have been evaluated in terms of their impact on awareness of healthy eating, food consumption, health outcome or cost/benefit. Design: Review of policy documents and their evaluations when available. Setting: European Member States. Subjects: One hundred and twenty-one policy documents revised, 107 retained. Results: Of the 107 selected interventions, twenty-two had been evaluated for their impact on awareness or knowledge and twenty-seven for their impact on consumption. Furthermore sixteen interventions provided an evaluation of health impact, while three actions specifically measured any cost/benefit ratio. The indicators used in these evaluations were in most cases not comparable. Evaluation was more often found for public information campaigns, regulation of meals at schools/canteens and nutrition education programmes. Conclusions: The study highlights the need not only to develop harmonized and verifiable procedures but also indicators for measuring effectiveness and success and for comparing between interventions and countries. EU policies are recommended to provide a set of indicators that may be measured consistently and regularly in all countries. Furthermore, public information campaigns should be accompanied by other interventions, as evaluations may show an impact on awareness and intention, but rarely on consumption patterns and health outcome.

The 'veil' of control: exploring the attitudes and perceptions of UK design controllers

In the UK, architectural design is regulated through a system of design control for the public interest, which aims to secure and promote ‘quality’ in the built environment. Design control is primarily implemented by locally employed planning professionals with political oversight, and independent design review panels, staffed predominantly by design professionals. Design control has a lengthy and complex history, with the concept of ‘design’ offering a range of challenges for a regulatory system of governance. A simultaneously creative and emotive discipline, architectural design is a difficult issue to regulate objectively or consistently, often leading to policy that is regarded highly discretionary and flexible. This makes regulatory outcomes difficult to predict, as approaches undertaken by the ‘agents of control’ can vary according to the individual. The role of the design controller is therefore central, tasked with the responsibility of interpreting design policy and guidance, appraising design quality and passing professional judgment. However, little is really known about what influences the way design controllers approach their task, providing a ‘veil’ over design control, shrouding the basis of their decisions. This research engaged directly with the attitudes and perceptions of design controllers in the UK, lifting this ‘veil’. Using in-depth interviews and Q-Methodology, the thesis explores this hidden element of control, revealing a number of key differences in how controllers approach and implement policy and guidance, conceptualise design quality, and rationalise their evaluations and judgments. The research develops a conceptual framework for agency in design control – this consists of six variables (Regulation; Discretion; Skills; Design Quality; Aesthetics; and Evaluation) and it is suggested that this could act as a ‘heuristic’ instrument for UK controllers, prompting more reflexivity in relation to evaluating their own position, approaches, and attitudes, leading to better practice and increased transparency of control decisions.

Design of a GNSS receiver for the ESEO mission

This thesis was carried out inside the ESA's ESEO mission and focus in the design of one of the secondary payloads carried on board the spacecraft: a GNSS receiver for orbit determination. The purpose of this project is to test the technology of the orbit determination in real time applications by using commercial components. The architecture of the receiver includes a custom part, the navigation computer, and a commercial part, the front-end, from Novatel, with COCOM limitation removed, and a GNSS antenna. This choice is motivated by the goal of demonstrating the correct operations in orbit, enabling a widespread use of this technology while lowering the cost and time of the device’s assembly. The commercial front-end performs GNSS signal acquisition, tracking and data demodulation and provides raw GNSS data to the custom computer. This computer processes this raw observables, that will be both transferred to the On-Board Computer and then transmitted to Earth and provided as input to the recursive estimation filter on-board, in order to obtain an accurate positioning of the spacecraft, using the dynamic model. The main purpose of this thesis, is the detailed design and development of the mentioned GNSS receiver up to the ESEO project Critical Design Review, including requirements definition, hardware design and breadboard preliminary test phase design.

A current literature review of the social and economic ramifications of pharmacogenomic research

Objective. To explore issues in current literature concerning possible social and economic ramifications of pharmacogenomic research. Design. Review of the literature. Data sources: Academic Search Premier, Blackwell Synergy, PUBMED and Social Sciences Citation Index. Review methods. Articles dealing with the social and economic ramifications of pharmacogenomic research were selected. The articles discussed at least one of 5 areas (race, privacy/confidentiality, ethics, insurance, and research and development). Some restrictions were placed on the articles chosen to narrow down the number of articles to a relevant, manageable amount. Results. Approximately 219 articles were selected for review; 159 were fully reviewed and found to be relevant to the issues; and 33 were cited. Conclusion. Insurance and research and development decisions are led by the free-market system with limited intervention from government. Race/ethnicity, privacy/confidentiality, and ethics continue to be debated with no clear answer. However, some compromise is regulated by government based upon current laws involving these issues. ^

Review and evaluation of automotive fuel conservation technologies. Final summary report.

National Highway Traffic Safety Administration, Washington, D.C.

I Stood Up: Social Design in Practice

Through practice-based research, we explore how interdisciplinary design projects can function to address social issues concerning environmental and social problems. Using two case studies developed between London in the United Kingdom, and Delhi and Ahmedabad in India, we discuss the importance of engagement with the people who the design ultimately serves. Finally, we argue that design concerned with complex social problems require equally complex, multidimensional responses, informed by bodies of knowledge, practices and approaches that lie outside of traditional design approaches.

National architecture conference 2012

May was a particularly busy month with lots of exciting architectural things happening in Brisbane, including the sell-out 2012 National Architecture Conference. The total number of conference attendees was 1,625, which was the largest number of attendees to any Australian National Architecture Conference to date. This was the first time that the National Architecture Conference had been held in Brisbane in over 20 years, and the enormous turnout of 947 Queenslanders to the conference was testament to the positive decision to include Brisbane as a conference venue. The theme of this year’s conference was ‘experience’. Building on ideas introduced in the recent ‘natural artifice’ conference, creative directors Shane Thompson, Michael Rayner and Peter Skinner focused closely on the real, sensed experience of architecture within its natural and constructed settings and the experience of designing and making architecture. The conference attracted a variety of high profile international speakers, including architect and professor, Wang Shu, the 2012 Pritzker Architecture Prize Laureate and co-founder of the Amateur Architecture Studio in China. Other highlights included presentations from Peter Rich [South Africa], Kathryn Findlay [United Kingdom], Rachel Neeson [Australia], Anuradha Mathur & Dilip da Cunha [United States] and Kjetil Thorsen [Norway]. QUT had a strong presence at the conference. In addition to pleasing attendance rates from QUT School of Design students and staff, our Head-of-School Professor Paul Sanders, was given the honourable task of introducing keynote speaker Peter Rich, and facilitating the Q&A session after his presentation, which received a standing ovation. There were many events organised for students and young architects by QUT’s SONA reps, including a masterclass, opening party, collaborative design and construction of the SONA Pavilion, and finally, organisation of the all important SONA Hangover Breakfast, the morning after the closing party. The 2012 National Architecture Conference was truly memorable and an experience not to have been missed. I encourage anyone with a passion for architecture and a desire to be completely inspired by current and emerging leaders in our exciting profession, to start making plans to attend next year’s conference.

Architecture for a free subjectivity

In October 2012, Simone presented her book Architecture for a Free Subjectivity to the University of Michigan, Taubman College of Architecture and Urban Planning. This book explores the architectural significance of Deleuze’s philosophy of subjectivization, and Guattari’s overlooked dialogue on architecture and subjectivity. In doing so, it proposes that subjectivity is no longer the exclusive provenance of human beings, but extends to the architectural, the cinematic, the erotic, and the political. It defines a new position within the literature on Deleuze and architecture, while highlighting the neglected issue of subjectivity in contemporary discussion.

Learning from Eames : six lessons

"Eventually everything connects—people, ideas, objects. The quality of the connections is the key toquality per se.” (Charles Eames) On 8 November, 2007, in a moment charged with serendipity, an Exhibition titled ‘The Gifted Eye of Charles Eames—A Portfolio of 100 images’ was opened exclusively to Brisbane. The Artisan Gallery in Fortitude Valley became the launch point for an international orbit of Fringe locations hosting one of 18 sets of 100 images each...