Análise histológica de defeitos ósseos preenchidos com biomateriais e associados a implantes osseointegrados. Estudo em cães

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Enxerto de tecido conjuntivo para correção da margem peri-implantar

Soft tissue recessions frequently cause esthetic disharmony and dissatisfaction. The results of coverage in peri-implant sites, in comparison with soft tissue coverage around a tooth, is less predictable. This clinical report describes the correction of an esthetic problem with a single-tooth implant-supported using a subepithelial connective tissue graft (SCTG) combined with the re-establishment of a new limit of gingival margin, and emergence crown profile. After anamnese and clinical exam it was observed an implant in the region of tooth 22 in vestibular position to alveolar ridge with a recession of 5 mm in its vestibular face. In the first cirurgical procedure the crown and the abutment were removed and a SCTG associated with a coronally positioned flap was performed in order to re-establish the limit of gingival margin. After 90 days, it was observed that the tissue in the implant site showed no adequate volume or thickness. Because of that, another SCTG was performed. The reopening procedure to install the healing cap was performed after 4 weeks. Then the prosthesis was installed. At 180 and 360 days postoperative, the implant adjacent tissue presented regular contour, color compatible with health and absence of bleeding. The patient was satisfied with the esthetic result. According to the clinical results and favorable esthetics it was possible to conclude that the use of ETC to correct an esthetic deficiency may be a feasible approach to establish new and stable peri-implant soft tissue contours.

Aspectos legais e éticos na implantodontia

There are few studies that evaluate the legal aspects, consent forms and ethical considerations facing implantology. This paper reviews and discusses the most important criteria in relation to the care of patients needing dental implants. Used the following databases: Medline (Pubmed), Dentistry Oral Science , Scielo, Athenas (Dissertation / Thesis), Digital Library of UNICAMP (Dissertation / Thesis), Digital Library of USP (Dissertation / Thesis) over the past 15 years . The inclusion and exclusion criteria were clinical articles, resulting from expert opinion on the subject of review and longitudinal follow-up who have studied or reported on the ethical aspects in implant dentistry; were excluded studies whose language was not English or Portuguese. Of a total of 52 articles and theses, after an analysis according to inclusion and exclusion criteria, 26 were selected. The literature shows that the safe practice of implantology is indispensable for the success of therapy. Respect the ethical, legal and make it explicit relationship with the patient (informed consent, information) are an important factor in the success of rehabilitative treatment. Since this treatment is long term, professional dental implant requires all documentation and clarity in time to offer treatment to the patient and professional expectations are met.

Terapéutica alternativa asociada al bruxismo: revisión de literatura

The aim of this study was to review the literature in order to discuss the main and the most effective therapeutic activities to control the nocturnal bruxism. To identify the studies included in this review, it was conducted a detailed and advanced search strategy in the PubMed and Medline databases. It was used as KEY WORDS: bruxism, therapeutics and drug therapy. Inclusion criteria were: case reports, randomized controlled trials, in vitro studies, literature reviews and systematic reviews with or without meta-analysis of the past 10 years that addressed the theme. Exclusion criteria were: articles without abstract, animal studies, articles whose first language was not English and articles from journals that do not belong to the dentario field. From a total of 83 articles, after an analysis according to the inclusion and exclusion criteria, 33 articles were selected. Despite the fact that there is a small number of prospective clinical studies with high degree of reliability and most studies that evaluated the alternative treatments effectiveness are isolated case reports, the current literature shows that the use of botulinum toxin has been shown to be effective in the control of nocturnal bruxism. On the other hand, important aspects such as transitory effect, safe dosage and application technique are still little discussed, then, further studies are needed to have these doubts clarified.

Pasividad en sobredentaduras con implantes ferulizados

Con el advenimiento de los implantes y con ellos la opción de las sobredentaduras, la pasividad comienza a jugar un papel fundamental para darle mejor pronóstico a la rehabilitación y prolongar la vida útil de los implantes. Dentro de este análisis es que se presenta el caso clínico de un paciente que concurre a la clínica de posgrado de la Facultad de Odontología, de sexo masculino, 75 años de edad portador de prótesis completa superior e inferior. Refiere fundamentalmente tener problemas en la dicción y en la masticación. El tratamiento propuesto al paciente fue: dos implantes en el maxilar inferior con una sobredentadura retenida por pilares esféricos y cuatro implantes superiores con una sobredentadura retenida por una barra, la cual feruliza los implantes y tiene en su estructura 3 esferas que dan retención a la prótesis. La barra superior fue colada seccionada en cuatro partes, unidas en boca y luego soldada mediante tecnología Laser. De ésta forma se busca obtener pasividad para evitar que los tornillos de fijación se aflojen, fracturas de tornillos o implantes, reabsorción de los tejidos óseo perimplantarios o pérdida de la oseointegración de los implantes.

Evaluación estructural del implante dental sometido a diferentes torques de inserción. Estudio "in vitro"

El material más frecuentemente utilizado en la implatología oral en la es el titanio comercialmente puro, ya que presenta una gran biocompatibilidad y constituye el material ideal para conseguir la osteointegración con éxito a largo plazo tras la carga funcional 2.HIPÓTESIS DE TRABAJO Las diferentes hipótesis nulas que se plantearon con respecto a la relación de las diferentes variables observadas en nuestro estudio fueron las siguientes: 1.Ho:Fuerzas superiores a 80Nw/cm2 no presentarían ni deformidades,ni alteraciones en la superficie de los implantes de conexión externa ni en los de conexión interna. 2.Ho:Fuerzas superiores a 90Nw/cm2 no presentarían deformidades, ni alteración en la superficie, ni fisuras en los implantes de conexión externa ni en los de conexión interna. 3.Ho:Fuerzas superiores a 100Nw/cm2 no presentarían deformidades en el transportador del implante, ni alteraciones en los hexágonos de los implantes de conexión externa ni en los de conexión interna...

Complicações microbiológicas na interface implante-pilar

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Medicina Dentária

Influência da técnica de fabricação e dos materiais sobre o ajuste da interface pilar/implante em infraestruturas implantossuportadas

The aim of this study was to compare the misfit vertical, horizontal and passivity of zirconia and cobalt-chromium frameworks fabricated for CAD / CAM technology and conventional method of casting. Sixteen frameworks in one-piece, were obtained from a metallic matrix containing three Brånemark compatible implants with regular platform (Titamax Cortical Ti, Neodent). Eight frameworks were fabricated by CAD / CAM system (NeoShape, Neodent): four in zirconia (ZirCAD) and four cobalt-chromium (CoCrcad). Eight other frameworks were obtained by conventional casting method: four cobalt-chromium with UCLA abutment premachined Co-Cr (CoCrUCci) and four cobalt-chromium with UCLA abutment castable (CoCrUCc). The fit vertical, horizontal and passivity by one-screw test were measured using scanning electron microscopy with magnification of 250x. Initially evaluated the passivity by one-screw test and subsequently to assess the vertical and horizontal misfit, tightened all the screws with a torque of 20 Ncm. Mean, standard deviation, minimum and maximum values were calculated for each group. Measurements of horizontal misfit were transformed into cumulative frequency for categorization of the variable and the group later comparison groups. To evaluate the existence of quantitative differences between the groups tested for vertical misfit and passivity, we used the Kruskal-Wallis test. The Mann-Whitney test was used to compare group to group statistical differences (p <0.05). Were observed the respective mean and standard deviation for vertical misfit and passivity in micrometers: ZirCAD (5.9 ± 3.6, 107.2 ± 36), CoCrcad (1.2 ± 2.2, 107.5 ± 26 ), CoCrUCci (11.8 ± 9.8, 124.7 ± 74), CoCrUCc (12.9 ± 11.0, 108.8 ± 85). There were statistical differences in measures of vertical misfit (p = 0.000). The Mann-Whitney test revealed statistical differences (p <0.05) between all groups except between CoCrUCci and CoCrUCc (p = 0.619). No statistical difference was observed for the passivity. In relation to the horizontal misfit groups ZirCAD and CoCrcad did not show best values in relation to CoCrUCci and CoCrUCc. Based on the results it can be concluded that frameworks fabricated by CAD / CAM technology had better values of vertical fit than those manufactured by the casting method, nevertheless, the passivity was not influenced by manufacturing technique and material used. The horizontal fit obtained by frameworks manufactured by CAD / CAM was not superior to those manufactured by casting. A lower variability in vertical adjustment and passivity was observed when frameworks were fabricated by CAD / CAM technology

Avaliação da resposta tecidual a cimentos cirúrgicos: estudo histológico realizado em alvéolo dental de ratos

Pós-graduação em Odontologia - FOA

Efeito da altura da união implante/componente protético sobre os tecidos periimplantares: estudo clínico e radiográfico em cães

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise da distribuição das tensões em restaurações cerâmicas sobre dente natural e implante por meio do método dos elementos finitos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência da carga oclusal parafuncional em próteses implantossuportadas, variando-se a proporção coroa/implante e o sistema de conexão protética: estudo pelo método dos elementos finitos tridimensionais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito da ausência de passividade no sistema coroa-implante-parafuso de retenção por meio do MEF-2D

Pós-graduação em Odontologia - FOA

Avaliação da influência da angulação do implante osseointegrado associado à prótese parcial removível classe I mandibular pelo método dos elementos finitos

Pós-graduação em Odontologia - FOA