Spectral analysis of the effects of daylight saving time on motor vehicle fatal traffic accidents. Final report.

National Highway Traffic Safety Administration, Mathematical Analysis Division, Washington, D.C.

Optimizing the CAMCOG test in the screening for mild cognitive impairment and incipient dementia: saving time with relevant domains

Objective: To identify the CAMCOG sub-items that best contribute for the identification of patients with mild cognitive impairment (MCI) and incipient Alzheimer`s disease (AD) in clinical practice. Methods: Cross-sectional assessment of 272 older adults (98 MCI, 82 AD, and 92 controls) with a standardized neuropsychological battery and the CAMCOG schedule. Backward logistic regression analysis with diagnosis (MCI and controls) as dependent variable and the sub-items of the CAMCOG as independent variable was carried out to determine the CAMCOG sub-items that predicted the diagnosis of MCI. Results: Lower scores on Language, Memory, Praxis, and Calculation CAMCOG sub-items were significantly associated with the diagnosis of MCI. A composite score obtained by the sum of these scores significantly discriminated MCI patients from comparison groups. This reduced version of the CAMCOG showed similar diagnostic accuracy than the original schedule for the identification of patients with MCI as compared to controls (AUC = 0.80 +/- 0.03 for the reduced CAMCOG; AUC = 0.79 +/- 0.03 for the original CAMCOG). Conclusion: This reduced version of the CAMCOG had similar diagnostic properties as the original CAMCOG and was faster and easier to administer, rendering it more suitable for the screening of subtle cognitive deficits in general clinical practice. Copyright (C) 2010 John Wiley & Sons, Ltd.

Caracterização e distribuição de cronotipos no sul do Brasil: diferenças de gênero e estação de nascimento

OBJETIVO: Investigar a tipologia circadiana e as diferenças de gênero em universitários do sul do Brasil. MÉTODOS: Voluntários (736) de 17 a 49 anos preencheram a versão brasileira do Questionário de Cronotipo (QC), tradução do Morningness-eveningness Questionnaire (MEQ) de Horne e Östberg. Medidas de tendência central e dispersão e curva de distribuição dos escores do QC (Kolmogorov-Smirnov) foram calculadas de acordo com gênero (teste t de Student), idade, estação de nascimento e desconforto com o horário de verão (qui-quadrado). RESULTADOS: Foram incluídos 648 indivíduos (36% homens, 64% mulheres), com perdas de 12% por questionários incorretos. A distribuição dos escores do QC evidenciou uma curva normal (amplitude = 18-77; média = 46,6; desvio-padrão = 10,8). Nesta amostra, 32% foram vespertinos, 54% intermediários e 14% matutinos. As médias do QC foram significativamente diferentes (p = 0,003): homens (44,9 ± 10,8) comparados com mulheres (47,5 ± 10,7) e 70% dos que nasceram na primavera e no verão foram vespertinos (p = 0,015), sem associação gênero-estação do ano. CONCLUSÃO: Homens e nascidos na primavera-verão evidenciaram preferência pela vespertinidade, não havendo diferença de gênero com relação à estação de nascimento. Nossos resultados estão de acordo com estudos realizados no hemisfério norte que mostraram, também, uma associação entre a estação de nascimento e o cronotipo.

The effects of real time control of welding parameters on weld quality in plasma arc keyhole welding

Joints intended for welding frequently show variations in geometry and position, for which it is unfortunately not possible to apply a single set of operating parameters to ensure constant quality. The cause of this difficulty lies in a number of factors, including inaccurate joint preparation and joint fit up, tack welds, as well as thermal distortion of the workpiece. In plasma arc keyhole welding of butt joints, deviations in the gap width may cause weld defects such as an incomplete weld bead, excessive penetration and burn through. Manual adjustment of welding parameters to compensate for variations in the gap width is very difficult, and unsatisfactory weld quality is often obtained. In this study a control system for plasma arc keyhole welding has been developed and used to study the effects of the real time control of welding parameters on gap tolerance during welding of austenitic stainless steel AISI 304L. The welding tests demonstrated the beneficial effect of real time control on weld quality. Compared with welding using constant parameters, the maximum tolerable gap width with an acceptable weld quality was 47% higher when using the real time controlled parameters for a plate thickness of 5 mm. In addition, burn through occurred with significantly larger gap widths when parameters were controlled in real time. Increased gap tolerance enables joints to be prepared and fit up less accurately, saving time and preparation costs for welding. In addition to the control system, a novel technique for back face monitoring is described in this study. The test results showed that the technique could be successfully applied for penetration monitoring when welding non magnetic materials. The results also imply that it is possible to measure the dimensions of the plasma efflux or weld root, and use this information in a feedback control system and, thus, maintain the required weld quality.

STD syndrome packets: Improving syndromic management of sexually transmitted diseases in developing countries

Objective: To design, introduce, and evaluate STD syndrome packets containing recommended drugs for each syndrome, four condoms, a partner treatment card, and a patient information leaflet, with the goal of improving sexually transmitted disease (STD) case management. Methods: Packet design evolved around available packaging technology, informed by pilot testing with nurses working in primary care clinics, doctors in private medical practices, and patients with an STD, in Hlabisa, South Africa. Evaluation 1 year later included analysis of distribution records and interviews with 16 nurses and 61 patients. Results: A cheap packet (2 U, S, cents each, excluding contents) compatible with current legislation was designed and introduced to six public sector clinics and as a short pilot to five private medical practices, Four thousand eighty-five packets were distributed to the clinics, equivalent to approximately 115% of the STDs reported over that period. All 16 nurses reported using the packets, but only 63% did so all the time because of occasional supply problems, All believed the packets improved treatment by saving time (75%), improving supply of condoms and partner cards (44%), and making treatment easier (56%), Patients also responded positively, and most said they would buy a packet (up to $5) at a pharmacy (84%) or store (63%) if available. Conclusions: The STD syndrome packets have the potential to improve STD syndromic management by standardizing therapy and improving the supply of condoms, partner cards, and information leaflets. Packets are popular with practitioners and patients, but consistent supply is essential for maximal impact, There may be scope for social marketing of the packets, which could further increase use.

Optimization of antioxidants extraction from coffee silverskin, aroasting by-product, having in view a sustainable process

Coffee silverskin is a major roasting by-product that could be valued as a source of antioxidant compounds. The effect of the major variables (solvent polarity, temperature and extraction time) affecting the extraction yields of bioactive compounds and antioxidant activity of silverskin extracts was evaluated. The extracts composition varied significantly with the extraction conditions used. A factorial experimental design showed that the use of a hydroalcoholic solvent (50%:50%) at 40 °C for 60 min is a sustainable option to maximize the extraction yield of bioactive compounds and the antioxidant capacity of extracts. Using this set of conditions it was possible to obtain extracts containing total phenolics (302.5 ± 7.1 mg GAE/L), tannins (0.43 ± 0.06 mg TAE/L), and flavonoids (83.0 ± 1.4 mg ECE/L), exhibiting DPPHradical dot scavenging activity (326.0 ± 5.7 mg TE/L) and ferric reducing antioxidant power (1791.9 ± 126.3 mg SFE/L). These conditions allowed, in comparison with other “more effective” for some individual parameters, a cost reduction, saving time and energy.

Projeto topológico de uma rede rodoviária

Mestrado em Engenharia Informática - Área de Especialização em Sistemas Gráficos e Multimédia

Estudo e Acompanhamento de Projeto de Estabilidade

O trabalho foi desenvolvido na empresa Masterprojetos – soluções integradas, através da elaboração e desenvolvimento do projeto de estabilidade de um edifício de cinco pisos, em que um deles se encontra enterrado. Este edifício incorpora um bloco de habitação multifamiliar e um bloco de habitação unifamiliar e comércio. Tanto o edifício como a empresa estão localizados no Peso da Régua. O trabalho pode-se dividir em duas partes: Numa primeira parte estão descritas as funções desempenhadas e contextualizada a metodologia de trabalho. Nesta parte está ainda descrita a ferramenta de trabalho Cypecad, a qual não houve oportunidade de aprender a usar durante o meu percurso académico e desenvolveu-se capacidades de maneira autodidata. São ainda referidos alguns softwares disponíveis no mercado, para o mesmo ramo de atividade. Numa segunda parte encontram-se descritos os pressupostos considerados no pré-dimensionamento do edifício assim como os elementos utilizados para a formulação do modelo de cálculo. Estão ainda feitas algumas verificações analíticas para a validação do modelo tido em conta para o dimensionamento. Estabeleceu-se também uma comparação entre as soluções obtidas através do software Cypecad e através do cálculo analítico para uma laje maciça. No final estão descritas as conclusões que foram obtidas, das quais se salientam a atenção que é necessário ter, quando se utiliza softwares de cálculo automático, quanto à introdução de dados e soluções que se obtêm , assim como a poupança de tempo que este tipo de ferramenta proporciona. É de referir também neste ponto as oportunidades que o estágio me proporcionou, como a visita de alguns locais de obras, as atividades de medição e orçamento de obra e acompanhamento de projetos de outras especialidades como redes prediais, térmica, acústica e ITED (infra-estruturas de Telecomunicações em Edifícios).

Bioinformàtica: add-in d'anàlisi i manipulació de seqüències per Microsoft Word

L'objectiu del projecte consisteix en el desenvolupament d'un add-in d'anàlisi i manipulació de seqüències, senzill i de fàcil ús, integrable en l'entorn Microsoft Word per permetre la manipulació de seqüències genètiques directament des de Microsoft Word, estalviant temps, en evitar haver de canviar constantment de programa i format per treballar amb elles; i, també, complicacions a l'usuari final. L'add-in ha estat desenvolupat en Visual Basic + VSTO i ofereix diverses funcionalitats d'edició i anàlisi de seqüències, com ara el complement, la recerca de motius o l'alineament.

Impactia: automating the study of the scientific production

Introduction The Andalusian Public Health System Virtual Library (Biblioteca Virtual del Sistema Sanitario Público de Andalucía, BV-SSPA) was set up in June 2006. It consists of a regional government action with the aim of democratizing the health professional access to quality scientific information, regardless of the professional workplace. Andalusia is a region with more than 8 million inhabitants, with 100,000 health professionals for 41 hospitals, 1,500 primary healthcare centres, and 28 centres for non-medical attention purposes (research, management, and educational centres). Objectives The Department of Development, Research and Investigation (R+D+i) of the Andalusian Regional Government has, among its duties, the task of evaluating the hospitals and centres of the Andalusian Public Health System (SSPA) in order to distribute its funding. Among the criteria used is the evaluation of the scientific output, which is measured using bibliometry. It is well-known that the bibliometry has a series of limitations and problems that should be taken into account, especially when it is used for non-information sciences, such us career, funding, etc. A few years ago, the bibliometric reports were done separately in each centre, but without using preset and well-defined criteria, elements which are basic when we need to compare the results of the reports. It was possible to find some hospitals which were including Meeting Abstracts in their figures, while others do not, and the same was happening with Erratum and many other differences. Therefore, the main problem that the Department of R+D+i had to deal with, when they were evaluating the health system, was that bibliometric data was not accurate and reports were not comparable. With the aim of having an unified criteria for the whole system, the Department of R+D+i ordered the BV-SSPA to do the year analysis of the scientific output of the system, using some well defined criteria and indicators, among whichstands out the Impact Factor. Materials and Methods As the Impact Factor is the bibliometric indicator that the virtual library is asked to consider, it is necessary to use the database Web of Science (WoS), since it is its owner and editor. The WoS includes the databases Science Citation Index (SCI), Social Sciences Citation Index (SSCI) and Arts & Humanities Citation Index. To gather all the documents, SCI and SSCI are used; to obtain the Impact Factor and quartils, it is used the Journal Citation Reports, JCR. Unlike other bibliographic databases, such us MEDLINE, the bibliometric database WoS includes the address of all the authors. In order to retrieve all the scientific output of the SSPA, we have done general searches, which are afterwards processed by a tool developed by our library. We have done nine different searches using the field ‘address’; eight of them including ‘Spain’ and each one of the eight Andalusian Regions, and the other one combining ‘Spain’ with all those cities where there are health centres, since we have detected that there are some authors that do not use the region in their signatures. These are some of the search strategies: AD=Malaga and AD=Spain AD=Sevill* and AD=Spain AD=SPAIN AND (AD=GUADIX OR AD=BAZA OR AD=MOTRIL) Further more, the field ‘year’ is used to determine the period. To exploit the data, the BV-SSPA has developed a tool called Impactia. It is a web application which uses a database to store the information of the documents generated by the SSPA. Impactia allows the user to automatically process the retrieved documents, assigning them to their correspondent centres. In order to do the classification of documents automaticaly, it was necessary to detect the huge variability of names of the centres that the authors use in their signatures. Therefore, Impactia knows that if an author signs as “Hospital Universitario Virgen Macarena”, “HVM” or “Hosp. Virgin Macarena”, he belongs to the same centre. The figure attached shows the variability found for the Empresa Publica Hospital de Poniente. Besides the documents from WoS, Impactia includes the documents indexed in Scopus and in other databases, where we do bibliographic searches using similar strategies to the later ones. Aware that in the health centres and hospitals there is a lot of grey literature that is not gathered in databases, Impactia allows the centres to feed the application with these documents, so that all the SSPA scientific output is gathered and organised in a centralized place. The ones responsible of localizing this gray literature are the librarians of each one of the centres. They can also do statements to the documents and indicators that are collected and calculated by Impactia. The bulk upload of documents from WoS and Scopus into Impactia is monthly done. One of the main issues that we found during the development of Impactia was the need of dealing with duplicated documents obtained from different sources. Taking into account that sometimes titles might be written differently, with slashes, comas, and so on, Impactia detects the duplicates using the field ‘DOI’ if it is available or comparing the fields: page start, page end and ISSN. Therefore it is possible to guarantee the absence of duplicates. Results The data gathered in Impactia becomes available to the administrative teams and hospitals managers, through an easy web page that allows them to know at any moment, and with just one click, the detailed information of the scientific output of their hospitals, including useful graphs such as percentage of document types, journals where their scientists usually publish, annual comparatives, bibliometric indicators and so on. They can also compare the different centres of the SSPA. Impactia allows the user to download the data from the application, so that he can work with this information or include them in their centres’ reports. This application saves the health system many working hours. It was previously done manually by forty one librarians, while now it is done by only one person in the BV-SSPA during two days a month. To sum up, the benefits of Impactia are: It has shown its effectiveness in the automatic classification, treatment and analysis of the data. It has become an essential tool for all managers to evaluate quickly and easily the scientific production of their centers. It optimizes the human resources of the SSPA, saving time and money. It is the reference point for the Department of R+D+i to do the scientific health staff evaluation.

Knockout confirmation for Hurries: rapid genotype identification of Trypanosoma cruzi transfectants by polymerase chain reaction directly from liquid culture

Gene knockout is a widely used approach to evaluate loss-of-function phenotypes and it can be facilitated by the incorporation of a DNA cassette having a drug-selectable marker. Confirmation of the correct knockout cassette insertion is an important step in gene removal validation and has generally been performed by polymerase chain reaction (PCR) assays following a time-consuming DNA extraction step. Here, we show a rapid procedure for the identification of Trypanosoma cruzi transfectants by PCR directly from liquid culture - without prior DNA extraction. This simple approach enabled us to generate PCR amplifications from different cultures varying from 106-108 cells/mL. We also show that it is possible to combine different primer pairs in a multiplex detection reaction and even to achieve knockout confirmation with an extremely simple interpretation of a real-time PCR result. Using the “culture PCR” approach, we show for the first time that we can assess different DNA sequence combinations by PCR directly from liquid culture, saving time in several tasks for T. cruzi genotype interrogation.

Pedotransfer functions related to spatial variability of water retention attributes for lowland soils

The estimation of non available soil variables through the knowledge of other related measured variables can be achieved through pedotransfer functions (PTF) mainly saving time and reducing cost. Great differences among soils, however, can yield non desirable results when applying this method. This study discusses the application of developed PTFs by several authors using a variety of soils of different characteristics, to evaluate soil water contents of two Brazilian lowland soils. Comparisons are made between PTF evaluated data and field measured data, using statistical and geostatistical tools, like mean error, root mean square error, semivariogram, cross-validation, and regression coefficient. The eight tested PTFs to evaluate gravimetric soil water contents (Ug) at the tensions of 33 kPa and 1,500 kPa presented a tendency to overestimate Ug 33 kPa and underestimate Ug1,500 kPa. The PTFs were ranked according to their performance and also with respect to their potential in describing the structure of the spatial variability of the set of measured values. Although none of the PTFs have changed the distribution pattern of the data, all resulted in mean and variance statistically different from those observed for all measured values. The PTFs that presented the best predictive values of Ug33 kPa and Ug1,500 kPa were not the same that had the best performance to reproduce the structure of spatial variability of these variables.

Sharing Open Source License and Copyright Data with SPDX

Organizations across the globe are creating and distributing products that include open source software. To ensure compliance with the open source licenses, each company needs to evaluate exactly what open source licenses and copyrights are included - resulting in duplicated effort and redundancy. This talk will provide an overview of a new Software Package Data Exchange (SPDX) specification. This specification will provide a common format to share information about the open source licenses and copyrights that are included in any software package, with the goal of saving time and improving data accuracy. This talk will review the progress of the initiative; discuss the benefits to organizations using open source and share information on how you can contribute.

Redução seletiva aplicada à especiação de mercúrio em peixes: uma adaptação do método de Magos

In the selective reduction procedure proposed by Magos SnCl2 was used as reductant for inorganic mercury while total mercury was determined after reduction with a mixture of SnCl2 and CdCl2. The difference between total mercury and inorganic mercury determines the content of organic mercury. The procedure of the present work differs of Magos in that the mercury vapour is carried to the absorption cell after magnetic stirring of the solution in the reaction flask; in the Magos procedure, mercury vapour is carried by bubbling the gas in to the solution. In contrast to the Magos procedure this slight modification overcame the necessity of at calibration by analyte addition, saving time and gainning accuracy.

Determination of photosynthetic pigments in fleabane biotypes susceptible and resistant to the Herbicide Glyphosate

Chlorophylls and carotenoids are the main photosynthetic pigment in plants. In the weeds, the greatest amount of photosynthetic pigments can result in high competitiveness of the species. The aim of this study was to quantify the content of photosynthetic pigments in biotypes of fleabane (Conyza bonariensis) susceptible and resistant to glyphosate, by two different methods, as well as a correlation between chlorophyll content obtained by portable and classical methodology (extractable chlorophyll). An experiment was conducted in greenhouse and laboratory, 2 x 5 factorial scheme, where factor A was equivalent to biotypes of fleabane (resistant and susceptible to glyphosate) and factor B to developmental stages plants (rosette vegetative I, II and III and reproduction). At all stages of development, fleabane plants were evaluated with the portable determiner (chlorophyll content) and then the same leaves were subjected to classical methodology laboratory (extractable pigments). The resistant biotype of fleabane showed higher contents of chlorophyll a, b, and total carotenoids, inferring a greater competitive potential regarding the susceptible population to the herbicide. The portable determiner of chlorophyll showed high correlation with the classical method of determination of photosynthetic pigments, and can thus be used to accurately assess this, saving time and reagents.