Uma implementação da análise de componentes independentes em plataforma de hardware reconfigurável

Blind Source Separation (BSS) refers to the problem of estimate original signals from observed linear mixtures with no knowledge about the sources or the mixing process. Independent Component Analysis (ICA) is a technique mainly applied to BSS problem and from the algorithms that implement this technique, FastICA is a high performance iterative algorithm of low computacional cost that uses nongaussianity measures based on high order statistics to estimate the original sources. The great number of applications where ICA has been found useful reects the need of the implementation of this technique in hardware and the natural paralelism of FastICA favors the implementation of this algorithm on digital hardware. This work proposes the implementation of FastICA on a reconfigurable hardware platform for the viability of it's use in blind source separation problems, more specifically in a hardware prototype embedded in a Field Programmable Gate Array (FPGA) board for the monitoring of beds in hospital environments. The implementations will be carried out by Simulink models and it's synthesizing will be done through the DSP Builder software from Altera Corporation.

Um sistema para simular o comportamento de bancos trifásicos de reguladores de tensão usados em sistemas de distribuição de energia elétrica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Projeto em FPGA de um controlador unificado para correção de fator de potência em retificadores boost bidirecionais monofásicos

The use of Field Programmable Gate Array (FPGA) for development of digital control strategies for power electronics applications has aroused a growing interest of many researchers. This interest is due to the great advantages offered by FPGA, which include: lower design effort, high performance and highly flexible prototyping. This work proposes the development and implementation of an unified one-cycle controller for boost CFP rectifier based on FPGA. This controller can be applied to a total of twelve converters, six inverters and six rectifiers defined by four single phase VSI topologies and three voltage modulation types. The topologies considered in this work are: full-bridge, interleaved full-bridge, half-bridge and interleaved half-bridge. While modulations are classified in bipolar voltage modulation (BVM), unipolar voltage modulation (UVM) and clamped voltage modulation (CVM). The proposed project is developed and prototyped using tools Matlab/Simulink® together with the DSP Builder library provided by Altera®. The proposed controller was validated with simulation and experimental results

Modelo comportamental do capacitor ferroelétrico como unidade básica de neurônios artificiais e sua implementação em FPGA

This work proposes the use of the behavioral model of the hysteresis loop of the ferroelectrics capacitor as a new alternative to the usually costly techniques in the computation of nonlinear functions in artificial neurons implemented on reconfigurable hardware platform, in this case, a FPGA device. Initially the proposal has been validated by the implementation of the boolean logic through the digital models of two artificial neurons: the Perceptron and a variation of the model Integrate and Fire Spiking Neuron, both using the model also digital of the hysteresis loop of the ferroelectric capacitor as it’s basic nonlinear unit for the calculations of the neurons outputs. Finally, it has been used the analog model of the ferroelectric capacitor with the goal of verifying it’s effectiveness and possibly the reduction of the number of necessary logic elements in the case of implementing the artificial neurons on integrated circuit. The implementations has been carried out by Simulink models and the synthesizing has been done through the DSP Builder software from Altera Corporation.

Embedded DSP-Based Compact Fuzzy System and Its Application for Induction-Motor V/f Speed Control

This paper presents a compact embedded fuzzy system for three-phase induction-motor scalar speed control. The control strategy consists in keeping constant the voltage-frequency ratio of the induction-motor supply source. A fuzzy-control system is built on a digital signal processor, which uses speed error and speed-error variation to change both the fundamental voltage amplitude and frequency of a sinusoidal pulsewidth modulation inverter. An alternative optimized method for embedded fuzzy-system design is also proposed. The controller performance, in relation to reference and load-torque variations, is evaluated by experimental results. A comparative analysis with conventional proportional-integral controller is also achieved.

Fixed-point DSP implementation of nonlinear H(infinity) controller for large gap electromagnetic suspension system

Electromagnetic suspension systems are inherently nonlinear and often face hardware limitation when digitally controlled. The main contributions of this paper are: the design of a nonlinear H(infinity) controller. including dynamic weighting functions, applied to a large gap electromagnetic suspension system and the presentation of a procedure to implement this controller on a fixed-point DSP, through a methodology able to translate a floating-point algorithm into a fixed-point algorithm by using l(infinity) norm minimization due to conversion error. Experimental results are also presented, in which the performance of the nonlinear controller is evaluated specifically in the initial suspension phase. (C) 2009 Elsevier Ltd. All rights reserved.

REXIB: Remote Experiments Interface Builder

Remote Experimentation is an educational resource that allows teachers to strengthen the practical contents of science & engineering courses. However, building up the interfaces to remote experiments is not a trivial task. Although teachers normally master the practical contents addressed by a particular remote experiment they usually lack the programming skills required to quickly build up the corresponding web interface. This paper describes the automatic generation of experiment interfaces through a web-accessible Java application. The application displays a list of existent modules and once the requested modules have been selected, it generates the code that enables the browser to display the experiment interface. The tools? main advantage is enabling non-tech teachers to create their own remote experiments.

Desenvolvimento de um Controlador com DSP para um Motor CA de 30 kW para o CEPIUM

Dissertação de mestrado integrado em Engenharia Eletrónica Industrial e Computadores

Visió per computador en una plataforma basada en un DSP

En aquest projecte s'usa el servidor de vídeo d'Axis Communications 242s IV, basat en el DSP TMS320DM642 de Texas Instruments, com a plataforma per a la implementació d'un algorisme d'extracció de fons i pel desenvolupament d'una solució completa de comptatge de persones per a càmera zenital. En el primer cas, s'ha optimitzat i comparat el rendiment de l'algorisme amb el d'una versió per a PC per a avaluar el DSP com a processador per a lamigració d'una aplicació completa de vídeovigilància. En el segon cas s'han integrat tots els components del servidor en el desenvolupament del comptador per avaluar la plataforma com a base per a solucions completes.

Modulador de Magnitude em DSP

A eficiência espectral e o consumo de potência constituem dois parâmetros fundamentais a ter em conta no projecto de qualquer sistema de comunicação digital. As técnicas de modulação e a filtragem FIR do tipo root-raised cosine (RRC) de baixo rool-off, assumem um papel cada vez mais importante nas comunicações sem fios com vista à maximização da eficiência espectral dos sistemas. A consequência disto é um aumento da razão entre a potência de pico do sinal a transmitir e a sua potência média (Peak-to-Average Power Ratio - PAPR). Elevados valores de PAPR impõem elevados requisitos de linearidade nos amplificadores de potência usados nos transmissores, com consequente aumento do consumo de potência do sistema. Um elevado PAPR dificulta ainda o projecto dos conversores digitais - analógicos (DAC), devido à elevada gama dinâmica do sinal. A realização desta dissertação tem como objectivo a validação de um método proposto recentemente, controlo de magnitude (Magnitude Modulatation-MM) do sinal modulado com vista à redução do PAPR do sinal de banda limitada a transmitir. Este sistema foi designado por, Multistage Polyphase Magnitude Modulation (MPMM). O sistema foi desenvolvido num processador digital de sinal (DSP) TMS320C6713 (vírgula flutuante) da Texas Instruments (TI). Foram exploradas as capacidades de processamento paralelo deste DSP, de forma a maximizar o desempenho do sistema.

On the nesting biology of eumenine wasps yet again: Minixi brasilianum (de Saussure) is a builder and a renter... at the same time! (Hymenoptera, Vespidae, Eumeninae)

Our understanding of eumenine nesting biology is still elusive. The use of two nesting strategies, namely renting and building, are reported concomitantly for the first time for Minixi brasilianum (de Saussure, 1875). Ecological factors such as resource availability and protection against potential enemies may play an important role in eumenine nesting biology.

A Bridge Builder or a Raconteur? How Japan Manoeuvres the Global Development Discourse within the TICAD Process

Japan has been a major actor in the field of development cooperation for five decades, even holding the title of largest donor of Official Development Assistance (ODA) during the 1990s. Financial flows, however, are subject to pre-existing paradigms that dictate both donor and recipient behaviour. In this respect Japan has been left wanting for more recognition. The dominance of the so called ‘Washington Consensus’ embodied in the International Monetary Fund (IMF) and the World Bank has long circumvented any indigenous approaches to development problems. The Tokyo International Conference on African Development (TICAD) is a development cooperation conference that Japan has hosted since 1993 every five years. As the main organizer of the conference Japan has opted for the leading position of African development. This has come in the wake of success in the Asian region where Japan has called attention to its role in the so called ‘Asian Miracle’ of fast growing economies. These aspirations have enabled Japan to try asserting itself as a major player in directing the course of global development discourse using historical narratives from both Asia and Africa. Over the years TICAD has evolved into a continuous process with ministerial and follow-up meetings in between conferences. Each conference has produced a declaration that stipulates the way the participants approach the question of African development. Although a multilateral framework, Japan has over the years made its presence more and more felt within the process. This research examines the way Japan approaches the paradigms of international development cooperation and tries to direct them in the context of the TICAD process. Supplementing these questions are inquiries concerning Japan’s foreign policy aspirations. The research shows that Japan has utilized the conference platform to contest other development actors and especially the dominant forces of the IMF and the World Bank in development discourse debate. Japan’s dominance of the process is evident in the narratives found in the conference documents. Relative success has come about by remaining consistent as shown by the acceptance of items from the TICAD agenda in other forums, such as the G8. But the emergence of new players such as China has changed the playing field, as they are engaging other developing countries from a more equal level.

Communication as a trust builder in change management

Organizations are today characterized by uncertainty, fast changes and inability to predict the future. Both trust and communication are vital when changes are implemented in an organization. The purpose of this study was to examine how a change process can be enhanced by the means of communication and trust. This study was cheated by using the existing literature related to the subject.

Receipt from George Wilson, Contractor and Builder, St. Catharines

Receipt from George Wilson, Contractor and Builder, St. Catharines for work done, March 4, 1887.