Karyoplast exchange between strontium- and 6-DMAP-parthenogenetically activated zygotes of cattle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Síntese de ß-cetoésteres graxos a partir do ácido de Meldrum usando DCC e DMAP

Neste trabalho desenvolveu-se a síntese de -cetoésteres, a partir da acilação do ácido de Meldrum usando diferentes ácidos graxos, com cadeias saturadas e insaturadas. Inicialmente, foi realizado o experimento utilizando o ácido palmítico (1e) como modelo para obtenção de cloreto de ácido graxo, usando ácido de Meldrum e piridina como catalisador. Porém, após um longo tempo de reação, o -cetoéster palmítico (4e) foi obtido com baixo rendimento, não ultrapassando os 20%. Posteriormente, os experimentos foram realizados utilizando o ácidos graxos 1e, ácido de Meldrum (2), DCC, DMAP, e piridina à temperatura ambiente sob a atmosfera de nitrogênio. No entanto, o protocolo utilizado resultou no β-cetoéster 4e com rendimentos moderados. Em seguida examinou-se o efeito da adição do ácido de Meldrum após a adição dos ácido graxos e DCC. Neste caso, após a adição do DCC aos ácido graxos 1a-j foi observada a formação imediata das O-aciluréias graxas. A seguir a adição de 2,0 equiv de ácido de Meldrum (2) em diclorometano, revelou a formação dos respectivos enol graxos 3a-j. Posteriormente, os β- cetoésteres 4a-j foram obtidos a partir da reação do enol com o metanol. Este protocolo modificado proporcionou o aumento nos rendimentos (74 a 84%) dos β-cetoéster 4a-j. Após, o β-cetoéster 4k foi sintetizado em 75% utilizando o ácido de Meldrum (2) e ácido ricinoléico (1k), obtido a partir do biodiesel de mamona, à temperatura ambiente e sob a atmosfera de nitrogênio. Portanto, foi desenvolvido um método simples para obter β-cetoésteres graxos, a partir do ácido de Meldrum com cadeias graxas diversificadas utilizando DCC e DMAP. Além disso, o presente trabalho relata pela primeira vez a síntese de novos β-cetoésteres graxos derivados dos ácidos oléico, elaídico, ricinoléico, linoléico e linolênico.

Carbodiimide-mediated synthesis of poly(L-lactide)-based networks

Poly(L-lactide-co-succinic anhydride) networks were synthesised via the carbodiimide-mediated coupling of poly(L-lactide) (PLLA) star polymers. When 4-(dimethylamino)pyridine (DMAP) alone was used as the catalyst gelation did not occur. However, when 4-(dimethylamino)pyridinium p-toluenesulfonate (DPTS), the salt of DMAP and p-toluenesulfonic acid (PTSA), was the catalyst, the networks obtained had gel fractions comparable to those which were reported for networks synthesised by conventional methods. Greater gel fractions and conversion of the prepolymer terminal hydroxyl groups were observed when the hydroxyl-terminated star prepolymers reacted with succinic anhydride in a one-pot procedure than when the hydroxyl-terminated star prepolymers reacted with presynthesised succinic-terminated star prepolymers. The thermal properties of the networks, glass transition temperature (Tg), melting temperature (Tm) and crystallinity (Xc) were all strongly influenced by the average molecular weights between the crosslinks ((M_c). The network with the smallest (M_c )(1400 g/mol) was amorphous and had a Tg of 59 °C while the network with the largest (M_c ) (7800 g/mol) was 15 % crystalline and had a Tg of 56 °C.

Effect of the headgroup variation on the gene transfer properties of cholesterol based cationic lipids possessing ether linkage

Eight cholesterol based cationic lipids differing in the headgroup have been synthesized based on the ether linkage between the cationic headgroup and the cholesterol backbone. All the lipids formed stable suspensions in water. Transfection efficacies were examined in the absence and presence of serum using their optimized liposomal (lipid:DOPE) formulations. Our results showed that the transfection activities depend on the nature of the headgroup. Lipid bearing 4-N,N′-dimethylaminopyridine (DMAP) as headgroup showed the maximum transfection efficacy in the presence of serum. Importantly, the optimized formulation for this cationic lipid does not require DOPE, which is being used by most commercially available formulations. Cytotoxicity studies showed that the introduction of the positive charge decreases the cell viability of the cationic lipid formulations. Gel electrophoresis and Ethidium bromide exclusion assay revealed the different DNA binding abilities of formulations depending upon the headgroup of the cholesteryl lipid.

Reversible Formation of a Planar Chiral Ferrocenylboroxine and Its Supramolecular Structure

The boronic acid (pS)-1,2-NpFcB(OH)(2) (1) was obtained by treatment of the lithiated species (pS)-1,2-NpFcLi with B(O(i)Pr)(3), followed by acidic workup; subsequent dehydration gave the enantiomerically pure boroxine [(pS)-1,2-NpFcBO](3) (2) in 49% isolated yield. Multinuclear and 2D NMR spectroscopies, single-crystal X-ray diffraction, and elemental analysis served to confirm the structure of 2. In the solid-state structure, all three of the naphthyl groups point in one direction and all of the ferrocenyl moieties are placed on the opposite face of the boroxine ring, which is also the preferred conformation in solution according to a (1)H, (1)H-NOESY experiment. Cyclic voltammetry revealed three separate reversible oxidation events, which suggests significant communication between the ferrocenyl moieties. These redox processes experience a cathodic shift upon addition of 4-dimethylaminopyridine (DMAP) as a Lewis base. The six-membered ring is opened upon treatment with hot CHCl(3)/MeOH to form the methoxy species (pS)-1,2-NpFcB(OH)(OMe) (3), which can be converted back to the cycle 2 by dissolution in wet CHCl(3), followed by column chromatography on silica gel.

Ternary ion-pair complexation: a protocol for chiral discrimination and the assignment of absolute configuration of chiral hydroxy acids

The study demonstrates the utility of ternary ion-pair complex formed among BINOL (1,1'-Bi-2-naphthol), a carboxylic acid and an organic base, such as, dimethylpyridine (DMAP), 1,4-diazabicyclo2.2.2]octane (DABCO), as a versatile chiral solvating agent (CSA) for the enantiodiscrimination of carboxylic acids, measurement of enantiomeric excess (ee) and the assignment of absolute configuration of hydroxy acids. The proposed mechanism of ternary complex has wider application for testing the enantiopurity owing to the fact that the binary mixture using BINOL alone does not serve as a solvating agent for their discrimination. In addition, the developed protocol has an excellent utility for the assignment of the absolute configurations of hydroxy acids.

A versatile ternary ionic complex for chiral discrimination of molecules with diverse functionalities using H-1 NMR

This study reports a simple, efficient and versatile protocol developed for NMR spectroscopic enantiodiscrimination of molecules containing diverse functional -groups, such as amino alcohols, secondary alcohols, cyanohydrins, oxazolidones, diols, thiones and epoxides, using a phosphorous based three component mixture. The simple mixing and shaking of enantiopure 1,1'-binaphthyt-2,2'-diyl hydrogenphosphate (BNPA), 4-(dimethylamino)pyridine (DMAP) and a chiral analyte in the solvent CDCl3 served as a chiral solvating agent and resulted in well dispersed peaks for each enantiomer in the H-1 NMR spectrum. Discrimination could be achieved not only for the proton at the chiral centre, but also for multiple proton sites. The devised approach also permitted the precise measurement of the enantiomeric excess (ee).

Chiral discrimination of secondary alcohols and carboxylic acids by NMR spectroscopy

The manuscript reports two novel ternary ion-pair complexes, which serve as chiral solvating agents, for enantiodiscrimination of secondary alcohols and carboxylic acids. The protocol for discrimination of secondary alcohols is designed by using one equivalent mixture each of enantiopure mandelic acid, 4-dimethylaminopyridine (DMAP) and a chiral alcohol. For discrimination of carboxylic acids, the ternary complex is obtained by one equivalent mixture each of enantiopure chiral alcohol, DMAP and a carboxylic acid. The designed protocols also permit accurate measurement of enantiomeric composition. Copyright (C) 2014 John Wiley & Sons, Ltd.

复合材料转动壳体动力特性分析

根据转动壳体的动力学方程，在利用DMAP对大型有限元软件MSC／NASTRAN二次开发的基础上，呆用有限元方法对复合材料层合壳体转动状态下的动力特性进行了研究，分析了科氏力、离心力和横向剪力对固有频率的影响，并与实验结果进行了比较．结果显示由于科氏力的作用，即使在动坐标系下，层合壳体也会出现频率不等的前后行波，横向剪力使壳体的固有频率降低，且随着壳体厚径比的增加其影响显著增加．

The distribution of aquatic bugs (Hemiptera-Heteroptera) in Scotland

Data on the distribution of aquatic bugs in Scotland was compiled with a widely-used biological recording software called RECORDER supplemented by a mapping program (DMAP) and a program that linked the two. Status lists are given with a brief account of the distribution of each species. Common and widespread species are listed in group one, including Velia caprai and Gerris lacustris, with less common species in group two such as Hydrometra stagnorum and Microvelia reticulata. Rare, uncommon or under-recorded species are also listed. These include Hebrus ruficeps, Gerris najas and Cymatia coleoptrata.

两种三光子吸收染料光限幅性能的实验研究

研究了两种新型D-π-D结构的芴类衍生物4-{7-[4-（二甲基胺）苯基]-9，9-二（2-乙基己基）-9H-芴-2-}-N，N-二甲基苯胺[缩写为B（DMAP）F]和4-{2-[7-（4-氨基苯乙烯基）-9，9-二（2-乙基己基）-9H-芴-2-]乙烯基}苯胺（缩写为BASF）在四氢呋喃（THF）和N，N-二甲基甲酰胺（DMF）中的线性吸收和单光子荧光行为，用脉冲宽度为38ps，重复频率为10Hz的1064nmNd；YAG脉冲激光研究了两种化合物的三光子吸收性质，结果表明：受溶剂效应的影响，两种化合物在

可生物降解聚合物药物载体及其制备技术

药物释放体系因其具有提高药物的疗效，降低药物的毒副作用，减少药物的服用次数，拓宽给药途径等特点，而成为近几年来人们研究的热点。生物可降解高分子，由于它们在体内可以降解，降解产物可以被机体吸收或代谢，不存在积累在体内的危险，因此成为药物释放体系的载体的首选材料。特别是脂肪族聚酷类高分子，在与聚乙二醇形成嵌段共聚物后，不仅具有生物可降解性，而月＿大大地改善了材料与人体的生物相容性，作为药物载体材料时，延长了药物在体内的循环时间，降低了免疫响应性，引起了人们的极大兴趣。因此本论文主要是以MPEG-PLA两嵌段聚合物为药物的载体材料，详细研究了高分子量的MPEG-PLA两嵌段聚合物对紫杉醇的包裹，研究了MPEG-PLA和PLGA聚合物合金对胰岛素固体粉末的包裹，以及低分子量的MPEG-PLA的紫杉醇前药的合成、表征和由它制备而成的胶束的一些性质，取得了一些有意义的结果：1、采用改进的O／W乳液法，用高分子量的MPEG-PLA嵌段共聚物实现了对紫杉醇的纳米化包裹，并证实了聚合物的分子量对所制备的纳米微球的粒径的影响：分子量越大，粒径越大。同时发现了微球粒径越小，药物的包裹量越低。2、用扫描电镜（SEM）、光电子能谱（XPS）、差热分析（DSC）对纳米微球进行了分析和测定，结果表明，微球的尺寸在30Om-800nm范围，紫杉醇在纳米微球的表面几乎不存在，而是以无定形的状态分布在纳米微球中。3、对纳米微球中紫杉醇体外释放行为进行了侧定。它们显现出了明显的双相行为，即在初期释放速度很快，随后的释放速度变慢。同时，研究了MPEG-PLA的分子量对释放行为的影响：聚合物分子量越大，紫杉醇释放的速度就越慢。4、用固体粉末法和双乳液法对胰岛素进行了包裹，其中固体粉末法采用的是PLGA和MPEG-PLA两聚合物的混合溶液对纳米胰岛素颗粒进行了包裹，包裹率分析表明：固体粉末法对药物的包裹率高于双乳液法。所得的微球都是很好的球形，其尺寸在1-3um左右，它的剖面是核壳结构，胰岛素以晶粒的形式被包裹在微球中间。5、对固体粉末法和双乳液法制备的微球的体外释放行为进行了对比，发现由两种聚合物合金制备的微球的暴释现象得到了缓解，同时发现两种聚合物的配比不一样，其暴释缓解的程度不一样。6、以辛酸亚锡为催化剂成功地合成了低分子量的MPEG-PLA两嵌段聚合物。二经基乙酸配与过量的叔丁醇在DMAP存在下反应，成功制得了二轻基乙酸单叔丁酷。MPEG-PLA的端经基与二经基乙酸单叔丁酷在DCC参与下脱水酷化再将叔丁基去保护，便得到端梭基的MPEG-PLA。7、端基为梭基的MPEG-PLA与紫杉醇的2’-羟基或7-轻基进行了酷化反应，制备出MPEG-PLA-紫杉醇前药。8、制备了四种低分子量的MPEG-PLA-紫杉醇前药，用1H NMR和GPC进行了表征分析。紫杉醇前药中紫杉醇的含量最高可达到20％，依赖于MPEG-PLA中PLA段的长度。9、用荧光探针法考察了MPEG-PLA两嵌段聚合物和MPEG-PLA-紫杉醇前药的胶束化行为，发现前药总比相对应的两嵌段聚合物有更低的临界胶束浓度（CMC）。用透射电镜观察了胶束的形貌和尺寸大小，以及接药前后胶束尺寸的变化。发现都是很好的球状胶束，MPEG-PLA两嵌段聚合物和MPEG-PLA-紫杉醇前药胶束的平均粒径分别为25±3nm和33士Znm，说明聚合物在接药后，随着疏水部分分子量的增加，所形成的胶束粒径也增大。

带侧羧基的脂肪族生物降解聚合物

生物降解脂肪族聚酷如聚乙交醋（PGA）、聚丙交醋（PLA）、聚。一己内酷（PCL）以及它们的共聚物由于具有良好的生物相容性和生物降解性而在外科手术缝合线、组织工程、药物控制释放、骨固定等领域得到很多应用。但是，它们自身缺乏功能基团，亲水性差，因而在应用上受到很大限制。因此，含有功能侧基生物降解聚合物的制备在过去十年中受到大家极大的关注。功能基团的引入对于调节聚合物的性能如：亲水性、生物降解性和药物的渗透性等非常重要。需要特别指出的是，功能基团的引入为把药物和其它生物活性物质与聚合物结合进而扩大聚合物的应用范围提供了机会。本文合成了几个功能化单体并且通过共聚的方法制备了几种新型的两亲性功能化聚合物。这些改性后的聚合物可以通过化学键接上药物或者其它生物活性物质，有望作为靶向控释药物载体和智能化的组织工程支架材料。具体的研究结果如下：1．以2，2-二羟甲基丙酸节酷为功能单体，通过两步法成功合成了一系列新的带功能基团的聚酷酞胺，并通过1H NMR和FTIR对聚合物的化学结构进行了表征，DSC结果表明所合成的聚酯酰胺的Tm和Tg分别在150℃和0℃左右；2．合成了功能化的环状单体（35）-3-［（苄氧羰基）乙基」吗啉-2，5-二酮（BEMD），并以PEG作为引发剂，Sn（Oct）2作为催化剂，通过L一LA和BEMD的开环共聚合得到共聚物PLGBG-PEG-PLGBG；随后用10％铭碳催化氢化得到带有侧梭基的两亲性嵌段共聚物PLGG-PEG-PLGG和其它两亲性嵌段共聚物一样，PLGG-PEG-PLGG在水溶液中能够自组装成胶束，用花作为荧光探针，通过荧光光谱法研究了其形成胶束的过程并测定了它们的临界胶束浓度，发现在总的分子量大致相当的情况下，PLGG-PEG4600-PLGG比PLGG-PEG2000-PLGG有较高的临界胶束浓度；场发射电子显微镜表征结果显示胶束具有均一的球形特征，动态光散射结果表明该胶束具有较窄的单峰粒径分布；蛋白酶K溶液中的降解研究表明带有侧梭基的PLGG-PEG-PLGG比PLA具有更快的降解速率；人胚关节软骨细胞培养结果表明所合成的聚合物PLGG-PEG-PLGG显示出较好的细胞相容性。3．在缩合剂DCC和催化剂DMAP存在下，带有侧梭基的两亲性嵌段共聚物PLGOPEG-PLGG和紫杉醇发生缩合反应得到两亲性嵌段共聚物一紫杉醇键合药P（LGG-paclitaxel）-PEG-P（LGG-paclitaxel）。它具有两亲性嵌段共聚物的性质，能够自组装成胶束，场发射电子显微镜表征结果表明胶束具有均一的球形特征，动态光散射结果表明该胶束具有较窄的粒径分布，平均粒径为119.4nm。该胶束的药物释放具有pH敏感性，酸性环境中比生理环境中（pH＝7.4）具有较快的释放速率。P（LGG-Paclitaxel）-PEG-P（LGG-paclitaxel）胶束的壳层由良好亲水性的PEG组成，避免了胶束纳米粒子在血液循环中被人体网状内皮系统吞噬，保证有充足的时间通过EPR效应在肿瘤部位聚集，进而通过细胞内吞进入细胞并在细胞内的酸性环境中释放药物，进一步的研究工作有待深入进行。4．合成了功能化的环状碳酸酷单体MBC，以MPEG作为引发剂，ZnEt2作为催化剂，LLA和MBC发生开环共聚合，以较高的转化率，得到高分子量共聚物MPEG-b-P（LA-co-MBC）。13C NMR表明LLA和确c发生了无规共聚合；DSC征结果表明MPEG-b-P（LA-co-MBC）为无定型态聚合物，Tg在20-50℃之间，随着MBc含量的增加而降低；MPEG-b-P（LA-co-MBC）脱保护后得到带侧梭基的MPEG-b-P（LA-co-MCC），它的Tg明显提高，可能是聚合物侧梭基之间强的氢键作用力以及梭基对水解反应的催化作用造成的；脱保护前后的共聚物在蛋白酶K溶液中的降解研究表明，MPEG-b-P（LA-co-MCC）的降解速率大于MPEG-b-P（LA-co-MBC）的降解速率；人胚关节软骨细胞培养结果表明，所合成的MPEG-b-P（LA-co-MCC）是一种具有良好生物相容性的新型生物降解材料。5．利用本实验室开发的一种新型有机氨锯引发剂Sr-PO在温和的条件下通过顺序加料聚合的方法合成了新的嵌段共聚物PCL-b-PMBC。WAXD结果表明 PCL-b-PMBc中PCL的衍射峰均可观察到，只是衍射峰的强度随着PMBC含量的增加而减弱。DSC结果表明PCL-b-PMBC中PCL的Tm在57到52℃之间，并且随着PMBC含量的增加而降低。PCL-b-PMBC的玻璃化转变在-41.6 到-23.3℃之间，随着PMBC含量的增加而增加，这表明PMBC和PCL之间 有着强的相互作用，尽管两段不是完全相容的。PCL-b-PMBC的侧节醋在10％把碳催化下氢化还原为带侧梭基的PCL-b-PMCC后，衍射峰和结晶焙大大降低，说明侧梭基的存在使得分子链间有着强的氢键相互作用而不利于结晶。由以上分析可知，PCL-b-PMCC侧梭基的存在将会使共聚物的降解速度大大提高，而且因为功能梭基的存在可以使共聚物通过化学键连接上药物、短肤、寡糖或者其它生物活性物质，从而扩大该聚合物在生物医学领域的应用范围。

Alternating Copolymerization of Carbon Dioxide and Propylene Oxide Catalyzed by Cobalt Schiff Base Complex

Cobalt 2,4-dinitrophenolate (complex 1) based upon a N,N,O,O-tetradentate Schiff base ligand framework was prepared. X-ray diffraction analysis confirmed that complex 1 was triclinic species with a six-coordinated central cobalt octahedron in the solid. Asymmetric alternating copolymerization of carbon dioxide (CO2) with racemic propylene oxide (rac-PO) proceeded effectively by complex 1 in conjunction with (4-dimethylamino)pyridine (DMAP), yielding a perfectly alternating and bimodal molecular weight distribution PO/CO2 poly(propylene carbonate) (PPC) with a small amount of cyclic carbonate byproducts.

Alternating copolymerization of carbon dioxide and propylene oxide catalyzed by (R,R)-SalenCo(III)-(2,4-dinitrophenoxy) and Lewis-basic cocatalyst

A binary catalyst system of a chiral (R,R)-SalenCo(III)(2,4-dinitrophenoxy) (salen = N,N-bis(3,5-di-tert-butylsalicylidene)-1,2-diphenylethylenediimine) in conjunction with (4-dimethylamino)pyridine (DMAP) was developed to generate the copolymerization of carbon dioxide (CO2) and racemic propylene oxide (rac-PO). The influence of the molar ratio of catalyst components, the operating temperature, and reaction pressure on the yield as well as the molecular weight of polycarbonate were systematically investigated. High yield of turnover frequency (TOF) 501.2 h(-1) and high molecular weight of 70,400 were achieved at an appropriate combination of all variables. The structures of as-prepared products were characterized by the IR, H-1 NMR, C-13 NMR measurements. The linear carbonate linkage, highly regionselectivity and almost 100% carbonate content of the resulting polycarbonate were obtained with the help of these effective catalyst systems under facile conditions.