Parameterization of applied general equilibrium models with flexible trade specifications based on the Armington, Krugman, and Melitz models

This paper explains how the Armington-Krugman-Melitz supermodel developed by Dixon and Rimmer can be parameterized, and demonstrates that only two kinds of additional information are required in order to extend a standard trade model to include Melitz-type monopolistic competition and heterogeneous firms. Further, it is shown how specifying too much additional information leads to violations of the model constraints, necessitating adjustment and reconciliation of the data. Once a Melitz-type model is parameterized, a Krugman-type model can also be parameterized using the calibrated values in the Melitz-type model without any additional data. Sample code for the General Algebraic Modeling System (GAMS) has also been prepared to promote the innovative supermodel in the AGE community.

Neutrality in the choice of number of firms or level of fixed costs in calibrating an Armington-Krugman-Melitz encompassing module for applied general equilibrium models

This paper shows how an Armington-Krugman-Melitz encompassing module based on Dixon and Rimmer (2012) can be calibrated, and clarifies the choice of initial levels for two kinds of number of firms, or parameter values for two kinds of fixed costs, that enter a Melitz-type specification can be set freely to any preferred value, just as the cases we derive quantities from given value data assuming some of the initial prices to be unity. In consequence, only one kind of additional information, which is on the shape parameter related to productivity, just is required in order to incorporate Melitz-type monopolistic competition and heterogeneous firms into a standard applied general equilibrium model. To be a Krugman-type, nothing is needed. This enables model builders in applied economics to fully enjoy the featured properties of the theoretical models invented by Krugman (1980) and Melitz (2003) in practical policy simulations at low cost.

Behavioral characteristics of applied general equilibrium models with an Armington-Krugman-Melitz encompassing module

This paper explore how simulation results change with different choice of trade specification, and the strength of preference for traded variety by economic agent differs, utilizing two types of three-region, three-sector AGE model that includes the Armington-Krugman-Melitz Encompassing module based on Dixon and Rimmer (2012). Simulation experiments reveal that: (1) the Melitz-type specification does not always enhance effectiveness of a certain policy change more than the one obtained with the Krugman-type, especially when economic agents' preference for traded variety is not so strong; (2) there are likely to be points where the volumes of effects obtained with the Melitz-type exceed the ones with the Krugman-type; and (3) the preference of the producers, those who are in the sectors that exhibit increasing returns to scale, for traded variety might be the engine of explosive effects as suggested by Fujita, et al. (2000).

Business Cycles of Non-mono-cultural Developing Economies: The Case of ASEAN Countries

Based on analyses of actual data, we reveal that many Asian developing economies own economic structural features of "non-mono-cultural economy" and the "large primary good sector", which have not been discussed in developing economies RBC literature. We also examine the input-output tables to develop a model reflecting actual developing economies' structures. Referring to the analyses, we construct RBC models of ASEAN countries. Based on the model, we find that approximately half of GDP volatility is attributable to domestic productivity shocks, and the remaining half is attributable to price shocks.

Is It Worthwhile for Indonesia to Rush into a Free Trade Deal with Japan?

This report represents a preliminary attempt to refine some basic ideas on the potential impact Indonesia might experience from a free trade arrangement with Japan, using a forward-looking, multi-regional, multi-sectoral applied general equilibrium model of global trade to capture growth effects through capital accumulation paying attention to the changes in the patterns of interregional capital flows that might happen even before the policy change occurs. The simulation results revealed that the welfare gains of rushing into trade liberalization with Japan are not so large. This makes out that taking time over negotiations might be the best choice for Indonesia if the government places priority on convincing the Indonesian people that a free trade deal with Japan will definitely bring positive effects, while proceeding rapidly might be the answer if the country is serious about recovering the welfare levels that might be lowered by free trade arrangements among Malaysia, the Philippines, and Japan.

Spillover effects of TTIP on BRICS economies : a dynamic GVC-based CGE model

This paper uses a GVC (Global Value Chain)-based CGE model to assess the impact of TTIP between the U.S. and the EU on their main trading partners who are mainly engaged at the low end in the division system of global value chains, such as BRICS countries. The simulation results indicate that in general the TTIP would positively impact global trade and economies due to the reduction of both tariff and non-tariff barriers. With great increases in the US–EU bilateral trade, significant economic gains for the U.S. and the EU can be expected. For most BRICS countries, the aggregate exports and GDP suffer small negative impacts from the TTIP, except Brazil, but the inter-country trade within BRICS economies increases due to the substitution effect between the US–EU trade and the imports from BRICS countries when the TTIP commences.

Simulation analysis of the EU ELV/RoHS directives based on an applied general equilibrium model with Melitz-type trade specification

This paper explores the potential usefulness of an AGE model with the Melitz-type trade specification to assess economic effects of technical regulations, taking the case of the EU ELV/RoHS directives as an example. Simulation experiments reveal that: (1) raising the fixed exporting cost to make sales in the EU market brings results that exports of the targeted commodities (motor vehicles and parts for ELV and electronic equipment for RoHS) to the EU from outside regions/countries expand while the domestic trade in the EU shrinks when the importer's preference for variety (PfV) is not strong; (2) if the PfV is not strong, policy changes that may bring reduction in the number of firms enable survived producers with high productivity to expand production to be large-scale mass producers fully enjoying the fruit of economies of scale; and (3) When the strength of the importer's PfV is changed from zero to unity, there is the value that totally changes simulation results and their interpretations.

Productivity growth and the structure of production

In this study, interactions between potential hierarchical value chains existing in the production structure and industry-wise productivity growths are sought. We applied generalized Chenery-Watanabe heuristics for matrix linearity maximization to triangulate the input-output incidence matrix for both Japan and the Republic of Korea, finding the potential directed flow of values spanning the industrial sectors of the basic (disaggregated) industry classifications for both countries. Sector specific productivity growths were measured by way of the Trönquvist index, using the 2000-2005 linked input-output tables for both Japan and Korea.

Confidence Regions for Calibrated Parameters in Computable General Equilibrium Models

We consider the problem of accessing the uncertainty of calibrated parameters in computable general equilibrium (CGE) models through the construction of confidence sets (or intervals) for these parameters. We study two different setups under which this can be done.

Macroemesures in Computable General Equilibrium Models: a Probabilistic Treatment with an Application to Morocco.

With the help of an illustrative general equilibrium (CGE) model of the Moroccan Economy, we test for the significance of simulation results in the case where the exact macromesure is not known with certainty. This is done by computing lower and upper bounds for the simulation resukts, given a priori probabilities attached to three possible closures (Classical, Johansen, Keynesian). Our Conclusion is that, when there is uncertainty on closures several endogenous changes lack significance, which, in turn, limit the use of the model for policy prescriptions.

Forward Looking and Myopic Regional Computable General Equilibrium Models. How Significant is the Distinction?

We present a stylized intertemporal forward-looking model able that accommodates key regional economic features, an area where the literature is not well developed. The main difference, from the standard applications, is the role of saving and its implication for the balance of payments. Though maintaining dynamic forward-looking behaviour for agents, the rate of private saving is exogenously determined and so no neoclassical financial adjustment is needed. Also, we focus on the similarities and the differences between myopic and forward-looking models, highlighting the divergences among the main adjustment equations and the resulting simulation outcomes.

Statistical Inference for Computable General Equilibrium Models with Application to a Model of the Moroccan Economy

We study the problem of measuring the uncertainty of CGE (or RBC)-type model simulations associated with parameter uncertainty. We describe two approaches for building confidence sets on model endogenous variables. The first one uses a standard Wald-type statistic. The second approach assumes that a confidence set (sampling or Bayesian) is available for the free parameters, from which confidence sets are derived by a projection technique. The latter has two advantages: first, confidence set validity is not affected by model nonlinearities; second, we can easily build simultaneous confidence intervals for an unlimited number of variables. We study conditions under which these confidence sets take the form of intervals and show they can be implemented using standard methods for solving CGE models. We present an application to a CGE model of the Moroccan economy to study the effects of policy-induced increases of transfers from Moroccan expatriates.

Factor Markets in General Computable Equilibrium Models. Factor Markets Working Document No. 47, May 2013

One objective of Computable general equilibrium (CGE) models is the analysis of economy-wide effects of policy measures. The focus of the Factor Markets project is to analyse the functioning of factor markets for agriculture in the EU-27, including the Candidate Countries. While agricultural and food markets are fully integrated in a European single market, subject to an EU-wide common policy, the Common Agricultural Policy (CAP), this is not the case for the agricultural factor markets capital, labour and land. There are partly serious differences with regard to member state regulations and institutions affecting land, labour and capital markets. The presentation of this heterogeneity of factor markets amongst EU Member States have been implemented in the CGE models to improve model-based analyses of the CAP and other policy measures affecting agricultural production. This final report comprises the outcome of a systematic extension and improvement of the Modular Applied GeNeral Equilibrium Tool (MAGNET) model starting from an overview of the current state of the art to represent factor markets in CGE models to a description of work on labour, land and capital in MAGNET.

Spatial aspects of trade liberalization in Colombia: A general equilibrium approach

This paper offers some preliminary steps in the marriage of some of the theoretical foundations of new economic geography with spatial computable general equilibrium models. Modelling the spatial economy of Colombia using the traditional assumptions of computable general equilibrium (CGE) models makes little sense when one territorial unit, Bogota, accounts for over one quarter of GDP and where transportation costs are high and accessibility low compared to European or North American standards. Hence, handling market imperfections becomes imperative as does the need to address internal spatial issues from the perspective of Colombia`s increasing involvement with external markets. The paper builds on the Centro de Estudios de Economia Regional (CEER) model, a spatial CGE model of the Colombian economy; non-constant returns and non-iceberg transportation costs are introduced and some simulation exercises carried out. The results confirm the asymmetric impacts that trade liberalization has on a spatial economy in which one region, Bogota, is able to more fully exploit scale economies vis--vis the rest of Colombia. The analysis also reveals the importance of different hypotheses on factor mobility and the role of price effects to better understand the consequences of trade opening in a developing economy.

A comparison of results from MRIO and interregional computable general equilibrium (CGE) analyses of the impacts of a positive demand shock on the ‘CO2 trade balance’ between Scotland and the rest of the UK

In previous work we have applied the environmental multi-region input-output (MRIO) method proposed by Turner et al (2007) to examine the ‘CO2 trade balance’ between Scotland and the Rest of the UK. In McGregor et al (2008) we construct an interregional economy-environment input-output (IO) and social accounting matrix (SAM) framework that allows us to investigate methods of attributing responsibility for pollution generation in the UK at the regional level. This facilitates analysis of the nature and significance of environmental spillovers and the existence of an environmental ‘trade balance’ between regions. While the existence of significant data problems mean that the quantitative results of this study should be regarded as provisional, we argue that the use of such a framework allows us to begin to consider questions such as the extent to which a devolved authority like the Scottish Parliament can and should be responsible for contributing to national targets for reductions in emissions levels (e.g. the UK commitment to the Kyoto Protocol) when it is limited in the way it can control emissions, particularly with respect to changes in demand elsewhere in the UK. However, while such analysis is useful in terms of accounting for pollution flows in the single time period that the accounts relate to, it is limited when the focus is on modelling the impacts of any marginal change in activity. This is because a conventional demand-driven IO model assumes an entirely passive supply-side in the economy (i.e. all supply is infinitely elastic) and is further restricted by the assumption of universal Leontief (fixed proportions) technology implied by the use of the A and multiplier matrices. In this paper we argue that where analysis of marginal changes in activity is required, a more flexible interregional computable general equilibrium approach that models behavioural relationships in a more realistic and theory-consistent manner, is more appropriate and informative. To illustrate our analysis, we compare the results of introducing a positive demand stimulus in the UK economy using both IO and CGE interregional models of Scotland and the rest of the UK. In the case of the latter, we demonstrate how more theory consistent modelling of both demand and supply side behaviour at the regional and national levels affect model results, including the impact on the interregional CO2 ‘trade balance’.