Variability of input parameters related to pollutants build-up in stormwater quality modelling

The variability of input parameters is the most important source of overall model uncertainty. Therefore, an in-depth understanding of the variability is essential for uncertainty analysis of stormwater quality model outputs. This paper presents the outcomes of a research study which investigated the variability of pollutants build-up characteristics on road surfaces in residential, commercial and industrial land uses. It was found that build-up characteristics vary highly even within the same land use. Additionally, industrial land use showed relatively higher variability of maximum build-up, build-up rate and particle size distribution, whilst the commercial land use displayed a relatively higher variability of pollutant-solid ratio. Among the various build-up parameters analysed, D50 (volume-median-diameter) displayed the relatively highest variability for all three land uses.

Effect of trash on the coagulation and flocculation of sugarcane juice

The processing of juice expressed from whole green sugarcane crop (stalk and trash) leads to poor clarification performance, reduced sugar yield and poor raw sugar quality. The cause of these adverse effects is linked to the disproportionate contribution of impurities from the trash component of the crop. This paper reports on the zeta (ζ) potential, average size distribution (d50) and fractal dimension (Df) of limed juice particles derived from various juice types using laser diffraction and dynamic light scattering techniques. The influence of non-sucrose impurities on the interactive energy contributions between sugarcane juice particles was examined on the basis of Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Results from these investigations have provided evidence (in terms of particle stability) on why juice particles derived from whole green sugarcane crop are relatively difficult to coagulate (and flocculate). The presence of trash reduces the van der Waals forces of attraction between particles, thereby reducing coagulation and flocculation processes. It is anticipated that further fundamental work will lead to strategies that could be adopted for clarifying juices expressed from whole green sugarcane crop.

Effect of trash on the coagulation and flocculation of sugarcane juice

The processing of juice expressed from whole green sugarcane crop (stalk and trash) leads to poor clarification performance, reduced sugar yield and poor raw sugar quality. The cause of these adverse effects is linked to the disproportionate contribution of impurities from the trash component of the crop. This paper reports on the zeta (?) potential, average size distribution (d50) and fractal dimension (Df) of limed juice particles derived from various juice types using laser diffraction and dynamic light scattering techniques. The influence of non-sucrose impurities on the interactive energy contributions between sugarcane juice particles was examined on the basis of Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Results from these investigations have provided evidence (in terms of particle stability) on why juice particles derived from whole green sugarcane crop are relatively difficult to coagulate (and flocculate). The presence of trash reduces the van der Waals forces of attraction between particles, thereby reducing coagulation and flocculation processes. It is anticipated that further fundamental work will lead to strategies that could be adopted for clarifying juices expressed from whole green sugarcane crop.

Volatile properties of CNG and Diesel bus emissions produced during steady state and transient driving modes

An analysis of the emissions from 14 CNG and 5 Diesel buses was conducted during April & May, 2006. Studies were conducted at both steady state and transient driving modes on a vehicle dynamometer utilising a CVS dilution system. This article will focus on the volatile properties of particles from 4 CNG and 4 Diesel vehicles from within this group with a priority given to the previously un-investigated CNG emissions produced at transient loads. Particle number concentration data was collected by three CPC’s (TSI 3022, 3010 & 3782WCPC) having D50 cut-offs set to 5nm, 10nm & 20nm respectively. Size distribution data was collected using a TSI 3080 SMPS with a 3025 CPC during the steady state driving modes. During transient cycles mono-disperse “slices” of between 5nm & 25nm were measured. The volatility of these particles was determined by placing a thermodenuder before the 3022 and the SMPS and measuring the reduction in particle number concentration as the temperature in the thermodenuder was increased. This was then normalised against the total particle count given by the 3010 CPC to provide high resolution information on the reduction in particle concentration with respect to temperature.

Nanoparticle emissions from a fleet of CNG buses in transient and steady state operation

Particle emission measurements from a fleet of 14 CNG and 5 Diesel buses were measured both for transient and steady state mode s on a chassis dynamometer with a CVS dilution system. Several transient DT80 cycles and 4 steady sate modes (0, 25, 50 100% of maximum load) were measured for each bus tested. Particle number concentration data was collected by three CPC’s (TSI 3022, 3010 3782WCPC) having D50 cut-offs set to 5, 10 and 20nm respectively. The size distributions were measured with a TSI 3080 SMPS with a 3025 CPC during the steady state modes. Particle mass emissions were measured with a TSI Dustrak. Particle mass emissions for Diesel buses were upto 2 orders of magnitude higher than for CNG buses. Particle number emissions during steady state modes for Diesel busses were 2 to 5 times higher than for CNG busses for all of the tested loads. On the other hand for the DT80 transient cycle particle number emissions were up to 3 times higher for the CNG buses. More detailed analysis of the transient cycles revealed that the reason for this was due to high particle number emissions from CNG busses during the acceleration parts of the cycles. Particles emitted by the CNG busses during acceleration were in the nucleation mode with the majority being smaller than 10nm. Volatility measurements have also shown that they were highly volatile.

Interfacial Phenomena in Pharmaceutical Low Moisture Content Powder Processing

Powders are essential materials in the pharmaceutical industry, being involved in majority of all drug manufacturing. Powder flow and particle size are central particle properties addressed by means of particle engineering. The aim of the thesis was to gain knowledge on powder processing with restricted liquid addition, with a primary focus on particle coating and early granule growth. Furthermore, characterisation of this kind of processes was performed. A thin coating layer of hydroxypropyl methylcellulose was applied on individual particles of ibuprofen in a fluidised bed top-spray process. The polymeric coating improved the flow properties of the powder. The improvement was strongly related to relative humidity, which can be seen as an indicator of a change in surface hydrophilicity caused by the coating. The ibuprofen used in the present study had a d50 of 40 μm and thus belongs to the Geldart group C powders, which can be considered as challenging materials in top-spray coating processes. Ibuprofen was similarly coated using a novel ultrasound-assisted coating method. The results were in line with those obtained from powders coated in the fluidised bed process mentioned above. It was found that the ultrasound-assisted method was capable of coating single particles with a simple and robust setup. Granule growth in a fluidised bed process was inhibited by feeding the liquid in pulses. The results showed that the length of the pulsing cycles is of importance, and can be used to adjust granule growth. Moreover, pulsed liquid feed was found to be of greater significance to granule growth in high inlet air relative humidity. Liquid feed pulsing can thus be used as a tool in particle size targeting in fluidised bed processes and in compensating for changes in relative humidity of the inlet air. The nozzle function of a two-fluid external mixing pneumatic nozzle, typical for small scale pharmaceutical fluidised bed processes, was studied in situ in an ongoing fluidised bed process with particle tracking velocimetry. It was found that the liquid droplets undergo coalescence as they proceed away from the nozzle head. The coalescence was expected to increase droplet speed, which was confirmed in the study. The spray turbulence was studied, and the results showed turbulence caused by the event of atomisation and by the oppositely directed fluidising air. It was concluded that particle tracking velocimetry is a suitable tool for in situ spray characterisation. The light transmission through dense particulate systems was found to carry information on particle size and packing density as expected based on the theory of light scattering by solids. It was possible to differentiate binary blends consisting of components with differences in optical properties. Light transmission showed potential as a rapid, simple and inexpensive tool in characterisation of particulate systems giving information on changes in particle systems, which could be utilised in basic process diagnostics.

Estudio general de las politicas vigentes en cuarentena animal de Nicaragua, en los puestos fronterizos El Espino y Peñas Blancas en el periodo de Enero-Mayo 2009

En Nicaragua existen leyes, requisitos, y procedimientos que se aplican, para llevar a cabo la protección agropecuaria a nivel de los puestos fronterizos del país, por eso se propuso este trabajo monográfico que lleva por título "Estudio de las políticas vigentes en cuarentena animal de Nicaragua en los puestos fronterizo El Espino y Peñas Blancas en el periodo de Enero a Mayo del 2009", el cual se baso en los procedimientos de inspección en cuarentena animal, productos y subproductos según la Ley Básica de Salud Animal y Sanidad Vegetal (Ley 291). Este estudio se realizo en un periodo de cinco meses mediante la estadía en dichos puestos, los datos recopilados se obtuvieron de formatos oficiales de la Dirección General de protección agropecuaria (DGPSA) dentro de ellos tenemos los certificados zoosanitarios, permisos de importación, formatos de inspección, actas de retención, decomiso, destrucción y rechazo. Se confirmo que los puestos cumplen con los procedimientos de inspección cuarentenaria tomando en cuenta la ley 291 y manuales de inspección. Durante la etapa de investigación constatamos que existe una gran discrepancia entre el Puesto de El Espino y Peñas Blancas, tanto en el trabajo a realizar como en instalaciones, no obstante. ambos puestos carecen de instalaciones adecuadas para la inspección, cuentan con bajo presupuesto y poco personal, pero a pesar de las condíciones en que se encuentran los inspectores realizan un arduo esfuerzo por efectuar su trabajo. Se recomienda que todos los puestos cuarentenarios del país cumplan con las condiciones adecuadas, infraestructuras seguras y personal profesionalmente capacitado y debidamente actualizado con las enfermedades exóticas que puedan ingresar al país.

Uplift resistance of buried pipelines at low cover-diameter ratios

Reliable estimates for the maximum available uplift resistance from the backfill soil are essential to prevent upheaval buckling of buried pipelines. The current design code DNV RP F110 does not offer guidance on how to predict the uplift resistance when the cover:pipe diameter (H/D) ratio is less than 2. Hence the current industry practice is to discount the shear contribution from uplift resitance for design scenarios with H/D ratios less than 1. The necessity of this extra conservatism is assessed through a series of full-scale and centrifuge tests, 21 in total, at the Schofield Centre, University of Cambridge. Backfill types include saturated loose sand, saturated dense sand and dry gravel. Data revealed that the Vertical Slip Surface Model remains applicable for design scenarios in loose sand, dense sand and gravel with H/D ratios less than 1, and that there is no evidence that the contribution from shear should be ignored at these low H/D ratios. For uplift events in gravel, the shear component seems reliable if the cover is more than 1-2 times the average particle size (D50), and more research effort is currenty being carried out to verify this conclusion. Strain analysis from the Particle Image Velocimetry (PIV) technique proves that the Vertical Slip Surface Model is a good representation of the true uplift deformation mechanism in loose sand at H/D ratios between 0.5 and 3.5. At very low H/D ratios (H/D < 0.5), the deformation mechanism is more wedge-like, but the increased contribution from soil weight is likely to be compensated by the reduced shear contributions. Hence the design equation based on the Vertical Slip Surface Model still produces good estimates for the maximum available uplift resistance. The evolution of shear strain field from PIV analysis provides useful insight into how uplift resistance is mobilized as the uplift event progresses. Copyright 2010, Offshore Technology Conference.

Derecho agrario

El propósito de este texto es que los estudiantes cuenten con material básico de estudio que le permita tener conocimientos básicos jurídicos del Derecho Agrario. El derecho Agrario, no obstante su novedad constituye actualmente una de las ramas mas vigorosas en los diversos ordenamientos jurídicos del mundo, su carácter dinámico y las importancia de las relaciones jurídicas que regulan, le han permitido conocer un acentuado desarrollo ampliamente difundido en aquellas sociedades donde la economía se encuentra condicionada por la agricultura y en que las relaciones económicas, sociales y de poder llevan ese sello.

Legislación forestal en Nicaragua: críticas y sugerencias

PRIMERA PARTE RECONOCIMIENTO Y COLECCION DE DATOS I. HISTORIA FORESTAL DE NICARAGUA II.- DIBTRIBUCION Y CLASES DE BOSQUES EN NICARAGUA III. INFLUENCIA PROTECTORA DE LA VEGETACION EN NICARAGUA IV.- ADMINISTRACION FORESTAL V.- FORMAS DE PROPIEDAD DE LAS TIERRAS FORESTALES VI.- CONCESIONES MADERERAS VII.- LA INDUSTRIA MADERERA EN NICARAGUA VIII. RESUMEN DE LA LEGISLACION FORESTAL VIGENTE SEGUNDA PARTE DETERMINACION DE LAS NECESIDADES IX.- EL GOBIERNO Y LOS BOSQUES X.- ANALISIS DE LAS LEYES FORESTALES VIGENTES XI.- POLITICA FORESTAL PARA NICARAGUA TERCERA PARTE CONCLUSIONES Y RECOMENDACIONES XII.- CONCLUSIONES XIII.- RECOMENDACIONES BIBLIOGRAFIA APENDICE (Leyes Forestales vigentes de Nicaragua)

River Leven (at Newby Bridge) freeze coring report

This is the River Leven (at Newby Bridge) freeze coring report produced by Lancaster University in 2000. This study looks at fine materials in river Leven that may have to be considered detrimental to successful salmonid spawning. Following an observed decline in quality of salmonid fisheries at the site an investigation was initiated to assess the extent of ingress of fine sediments into the spawning gravels. A broader picture was sought by sampling both above and below the weir and close to both banks of the river. A comparison of the fine sediment from each sample site was undertaken. All the freeze cores used in this report contained distinct horizontal strata down through their length. The cores often penetrated into a highly compacted layer of light grey coloured material. The upper surface of this highly compacted layer is considered as a boundary between fine materials of different origin. Considerable variability was observed in the median grain size (D50) of the gravels from the cores. In addition variability was observed in the thickness of the upper less compacted layers. The role of regulated river flow across the weir in clearing fines from river gravels is briefly considered.

River Crake (at Bouthrey Bridge) freeze coring report

This is the River Crake (at Bouthrey Bridge) freeze coring report produced by Lancaster University in 1999. This study looks at fine materials in river Crake at Bouthrey Bridge that may have to be considered detrimental to successful salmonid spawning. Following an observed decline in quality of salmonid fisheries at the site an investigation was initiated to assess the extent of ingress of fine sediments into the spawning gravels. Fine sediments from one potential source, upstream riverbanks, are also compared to those isolated from the spawning gravels. The percentage by weight of fine sediments for the six freeze cores, was found to be lower than first expected, given the visual appearance of the reach. However the fines were found to be distributed evenly down the cores with a marked absence of an upper, coarse gravel armour layer. In addition the median grain size (D50) of the six samples was generally low, falling to 6mm for core 5. The low median grain size and the absence of coarse grained upper strata are considered detrimental to the success rate of salmonid spawning.

A simple prediction model for asphalt surface texture incorporating mix gradation and air voids

This paper presents the results of a preliminary study that seeks to show how asphalt grading and air voids are related to the texture depth of asphalt. The fiftieth percentile particle size (D50) is shown to be a good predictor of texture depth measurements from a collected database of field and laboratory studies. The D50 is used to normalise collected texture data and this 'relative texture' is shown to correlate with air voids. Regression analyses confirm that air voids should be included along with a measure of gradation in the interpretation of asphalt surface texture.The derived formulae are used to develop correlation charts.