Dimerisation of cyclooctene using Grubbs' catalysts

The dimerisation of cyclooctene (COE) to 1,9-cyclohexadecadiene, a molecule of interest to the fragrance industry, has been achieved using ruthenium catalysts in organic solvents with significantly better selectivities (47-74%) and yields (39-60%) than previously reported (34% and 30%, respectively). Grubbs' first and second generation catalysts, the Hoveyda-Grubbs' catalyst and a phosphonium alkylidene catalyst were tested in a range of organic solvents and ionic liquids (ILs), including 1:1 IL/dichloromethane mixtures and biphasic IL + pentane systems. The best results (74% selectivity, 60% yield) were obtained using Grubbs' first generation catalyst in 1,2-dichloroethane. The formation of trimer, tetramer and other higher molecular mass products were found to be favoured at low catalyst loadings (0.77 mM). Studies of metathesis reactions using 1,9-cyclohexadecadiene as substrate indicated that the monomer-dimer and monomer-trimer reactions are faster than the dimer-dimer reaction. The use of IL media allowed for the recyclability of the catalyst, although a drop in the yield of dimer generally occurred after the first run. Heterogeneized catalysts, where the IL-catalyst system was immobilised onto silica, resulted in fast reactions leading to poor yields of dimer. (C) 2011 Elsevier B.V. All rights reserved.

(A) Photoregulation of DNA Functions by Cyclic Azobenzene-tethered Oligonucleotides (B) Site-specific Fluorescent Labeling of DNA using Inverse Electron Demand Diels-Alder Reaction between trans-Cyclooctene Derivatives and BODIPY-Tetrazine Adducts

(A) Most azobenzene-based photoswitches require UV light for photoisomerization, which limit their applications in biological systems due to possible photodamage. Cyclic azobenzene derivatives, on the other hand, can undergo cis-trans isomerization when exposed to visible light. A shortened synthetic scheme was developed for the preparation of a building block containing cyclic azobenzene and D-threoninol (cAB-Thr). trans-Cyclic azobenzene was found to thermally isomerize back to the cis-form in a temperature-dependent manner. cAB-Thr was transformed into the corresponding phosphoramidite and subsequently incorporated into oligonucleotides by solid phase synthesis. Melting temperature measurement suggested that incorporation of cis-cAB into oligonucleotides destabilizes DNA duplexes, these findings corroborate with circular dichroism measurement. Finally, Fluorescent Energy Resonance Transfer experiments indicated that trans-cAB can be accommodated in DNA duplexes. (B) Inverse Electron Demand Diels-Alder reactions (IEDDA) between trans-olefins and tetrazines provide a powerful alternative to existing ligation chemistries due to its fast reaction rate, bioorthogonality and mutual orthogonality with other click reactions. In this project, an attempt was pursued to synthesize trans-cyclooctene building blocks for oligonucleotide labeling by reacting with BODIPY-tetrazine. Rel-(1R-4E-pR)-cyclooct-4-enol and rel-(1R,8S,9S,4E)-Bicyclo[6.1.0]non-4-ene-9-ylmethanol were synthesized and then transformed into the corresponding propargyl ether. Subsequent Sonogashira reactions between these propargylated compounds with DMT-protected 5-iododeoxyuridine failed to give the desired products. Finally a methodology was pursued for the synthesis of BODIPY-tetrazine conjugates that will be used in future IEDDA reactions with trans-cyclooctene modified oligonucleotides.

Synthesis and catalytic properties of cobalt- and molybdenum-containing mesoporous MCM-41 molecular sieves

Mesoporous MCM-41 type silicas containing molybdenum and cobalt have been prepared with pore sizes in the range 30-38 Angstrom and 54-59 Angstrom. Catalytic properties of these materials have been examined with respect to the oxidation of cyclooctene and aniline.

Ring-opening metathesis of bulky norbornene monomers and the radical-mediated hydrophosphonation of olefins

This thesis discusses two major topics: the ring-opening metathesis polymerization (ROMP) of bulky monomers and the radical-mediated hydrophosphonation of olefins. The research into the ROMP of bulky monomers is further divided into three chapters: wedge-shaped monomers, the alternating copolymerization of 1-methyloxanorbornene derivatives with cyclooctene, and the kinetic resolution polymerization of 1-methyloxanorbornene derivatives. The wedge-shaped monomers can be polymerized into diblock copolymers that possess photonic crystal properties. The alternating copolymerization of 1-methyloxanorbornene derivatives with cyclooctene is performed with > 90% alternation via two different routes: typical alternating copolymerization and a sequence editing approach. The kinetic resolution polymerization of these same 1-methyloxanorbornene monomers achieves only modest selectivity (S=4), but there is evidence that the growing polymer chain forms a helix that influences the selectivity of the resolution. The last topic is the radical-mediated hydrophosphonation of olefins. This synthetic method provides access to Wittig reagents that are capable of highly cis-selective olefinations of aldehydes.

环糊精衍生物的设计、合成及其对环辛烯光异构化研究

环糊精(Cyclodextrins, CDs)经化学修饰后可以得到各种类型的衍生物，不仅可以扩展其原有的键合能力，而且还可以改变其选择性，是当代超分子化学的一个研究热点。环糊精第二面的仲羟基比第一面的伯羟基有着更好的催化性能，第二面的选择性修饰将产生更多有价值的衍生物，可用于催化、酶模拟、手性识别等方面。 取代苯甲酰基修饰环糊精对顺式环辛烯(cis-cyclooctene)光异构化反应有非常重要的影响作用，苯环上取代基的性质和取代位置与产物的%ee值和对映体构型之间存在某种内在联系。有目的地选择适宜取代基，设计、合成新型环糊精光增感剂, 有可能按预定目的得到更高%ee值的反式环辛烯；同时，取代苯甲酰基修饰环糊精对cis-cyclooctene光异构化的增感机理有待于进一步阐明。 本论文工作对环糊精的化学修饰以及超分子体系对cis-cyclooctene不对称光异构化反应方面的进展进行了调研。合成了一系列单-6-位取代苯甲酰基修饰环糊精，用于cis-cyclooctene光异构化增感反应，并用圆二色光谱滴定法研究这些环糊精衍生物与cis-cyclooctene的相互作用，以探索光增感反应机理。在此基础上，探讨了环糊精第二面的选择性修饰方法。内容主要包括： 1. 简要介绍了超分子化学的概况，并对环糊精的选择性修饰方法和超分子体系对cis-cyclooctene不对称光异构化反应的主要成果和最新进展进行了评述。 2. 合成了12种单-6-O-(取代苯甲酰基)-β-环糊精，其中10种为新化合物。采用紫外光谱、红外光谱、核磁共振波谱以及质谱等手段对化合物的结构进行了表征。 3. 探索了直接选择性修饰环糊精第二面的便捷新方法。用取代苯甲酰咪唑酯为酰化试剂，0.2M碳酸盐缓冲溶液(pH=9.9)作催化剂，能够有效地活化2-位仲羟基，对环糊精第二面进行选择性修饰，此方法既简便又经济；同时，发现取代苯甲酰基能够在β-CD第二面的2-位、3-位羟基间相互迁移。 4. 用单-6-O-(取代苯甲酰基)-β-环糊精作光增感剂，对cis-cyclooctene光异构化反应进行研究。实验结果证明：取代苯甲酰基上的取代基性质、位置、长度对反应的对映选择性有很大影响；此外，反应体系溶剂极性对产物的%ee值和对映体构型也有重大影响。用单-6-O-(3-甲氧苯甲酰基)-β-CD作增感剂，cis-cyclooctene光异构化反应产物(R)-trans-cyclooctene的对映选择性为45.8%ee，是到目前为止取得的最好对映选择性。 5. 采用圆二色光谱滴定法研究环糊精衍生物与cis-cyclooctene的相互作用，计算包结物的平衡常数，研究包结物的相对稳定性，为探索光增感反应机理提供基础。我们猜测：电子效应对cis-cyclooctene光异构化反应的影响，可能比取代基位置对反应的影响更大，借助电子效应有希望获得更高的%ee值。 Cyclodextrins can be subjected to diverse modifications to give a wide variety of cyclodextrin derivatives, which could not only extend their original molecular binding ability, but also alter their molecular selectivity. Therefore, cyclodextrin chemistry is currently a significant topic in supramolecular chemistry. The more open secondary hydroxyl side of CDs is stated to be catalytically very important, modifications of this face are believed to produce valuable derivatives for catalysis, enzyme mimic, chiral discrimination, etc. Mono-6-O-(substituted benzoyl)-β-CDs as novel supramolecular photosensitizing hosts have recently excited considerable attention in photochirogenesis. The supramolecular photosenstization of cis-cyclooctene mediated by them gave chiral trans-cyclooctene, enantiomeric excess of which was critically affected by the substituent introduced to the sensitizer moiety. In order to enhance the photoenantiodifferentiating ability, and elucidate the origin mechanisms of substituent-dependent enantioselectivity, in this work a series of mono-6-O-(substituted benzoyl)-β-CDs have been synthesized, and applied for enantiodifferentiating photoisomerization of cis-cyclooctene. The major contents are as follows: 1. The general aspects of supramolecular chemistry were descibed briefly. The new progress and important achievements on methods of selective modification of cyclodextrin and supramolecular enantiodifferentiating photoisomerization of cis-cyclooctene were reviewed. 2. Twelve mono-6-O-(substituted benzoyl)-β-CDs including ten novel compounds have been synthesized. Their structures have been characterized by using UV-vis, IR, NMR and MS methods. 3. A new convenient strategy for direct acylation of β-cyclodextrin on the secondary hydroxyl face was achieved by using the combination of N-benzoylimidazole and carbonate buffer in DMF, and the acyl migration between the C-2 and C-3 hydroxyl groups of β-cyclodextrin was found. 4. Experiments using mono-6-O-(substituted benzoyl)-β-CDs as chiral sensitizing hosts for mediating the enantiodifferentiating photoisomerization of cis-cyclooctene, were carried out. The results indicate that enantiomeric excess was critically affected, or even switched in sign, by the substituent introduced to the sensitizer moiety, and polarity of solvent. Using mono-6-O-(3-methoxybenzoyl)-β-CD as chiral sensitizing host, (R)-trans-cyclooctene was obtained in up to 45.8% enantiomeric excess, which is the highest value ever reported for supramolecular photochirogenesis with analogous hosts. 5. The conformational variation of these modified CDs and their complexation behaviors with cis-cyclooctene were examined by circular dichroism spectroscopy in water-methanol mixed solvents, which reveal that the orientation of chromophore was highly sensitive to the type, position and length of the introduced substituents. In the end, the complex stability constants(Ks) were calculated, and the mechanisms of reaction were discussed. Maybe, electronic effects are more important than positions of substituents for mediating the enantiodifferentiating photoisomerization of cis-cyclooctene.

An efficient recyclable peroxometalate-based polymer-immobilised ionic liquid phase (PIILP) catalyst for hydrogen peroxide-mediated oxidation

A linear cation-decorated polymeric support with tuneable surface properties and microstructure has been prepared by ring-opening metathesis polymerisation (ROMP) of a pyrrolidinium-functionalised norbornene-based monomer with cyclooctene. The derived peroxophosphotungstate-based polymer-immobilised ionic liquid phase (PIILP) catalyst is an efficient and recyclable system for the epoxidation of allylic alcohols and alkenes, with only a minor reduction in performance on successive cycles.

Efficient and selective hydrogen peroxide-mediated oxidation of sulfides in batch and segmented and continuous flow using a peroxometalate-based polymer immobilised ionic liquid phase catalyst

The peroxometalate-based polymer immobilized ionic liquid phase catalyst [PO4{WO(O-2)(2)}(4)]@PIILP has been prepared by anion exchange of ring opening metathesis-derived pyrrolidinium-decorated norbornene/ cyclooctene copolymer and shown to be a remarkably efficient system for the selective oxidation of sulfides under mild conditions. A cartridge packed with a mixture of [PO4{WO(O-2)(2)}(4)]@PIILP and silica operated as a segmented or continuous flow process and gave good conversions and high selectivity for either sulfoxide (92% in methanol at 96% conversion for a residence time of 4 min) or sulfone (96% in acetonitrile at 96% conversion for a residence time of 15 min). The immobilized catalyst remained active for 8 h under continuous flow operation with a stable activity/selectivity profile that allowed 6.5 g of reactant to be processed (TON = 46 428) while a single catalyst cartridge could be used for the consecutive oxidation of multiple substrates giving activity-selectivity profiles that matched those obtained with fresh catalyst.

Síntese e aplicações catalíticas na funcionalização de alcanos de novos compostos com polioxometalatos e catiões orgânicos

A presente dissertação, que no seu conjunto se propõe apresentar o estudo de oxidação de compostos orgânicos com peróxido de hidrogénio na presença dos aniões do tipo Keggin, mono-substituídos por MnIII e FeIII, sob a forma de sais de tetra-n-butilamónio (TBA) e suportados em matriz de sílica funcionalizada, enquanto vital método de obtenção de importante precursores de síntese orgânica, tem na sua base o trabalho de Doutoramento desenvolvido no Departamento de Química da Universidade de Aveiro. Os compostos preparados e testados em sistema homogéneo foram os sais de TBA dos aniões de Keggin, de fórmula geral [XW11M(H2O)O39]n-, onde X = P, Si ou B e M = MnIII e FeIII. Em sistema heterogéneo foram testados diferentes materiais, que diferem entre si na matriz de sílica. Assim, fez-se a heterogeneização de [PW11Fe(H2O)O39]4- em sílica funcionalizada com catiões de césio e grupos propilamónio; [BW11Fe(H2O)O39]6- e [SiW11Fe(H2O)O39]5- foram imobilizados em sílica contendo grupos aminopropilo e o anião [PW11Mn(H2O)O39]4- foi suportado em sílica quimicamente modificada com grupos alquilamónio. Os substratos orgânicos estudados incluem o 1H-indeno, 1,2-di-hidronaftaleno, etilbenzeno, cumeno, p-cimeno, sec-butilbenzeno, 1- e 2-etilnaftaleno, cis-cicloocteno e ciclooctano. Paralelamente usaram-se alguns outros substratos, quando necessário obter esclarecimentos mecanísticos. A tese assenta numa estrutura composta por 7 capítulos. Na primeira, faz-se uma abordagem aos polioxometalatos e às reacções de oxidação de hidrocarbonetos, com particular destaque no uso de polioxometalatos em catálise oxidativa e também no uso de peróxido de hidrogénio como oxidante. A eficiência catalítica dos aniões de Keggin mono substituídos por MnIII e FeIII, em sistema homogéneo foi avaliada na oxidação de compostos orgânicos característicos, nomeadamente de ciclo-alcenilbenzenos, alquilbenzenos, ciclo-alquilbenzenos e hidrocarbonetos aromáticos policíclicos com H2O2, em acetonitrilo. Os resultados destes estudos encontram-se descritos nos capítulos dois, três e quatro desta tese. Estes compostos mostraram-se catalisadores eficientes e selectivos para a oxidação de alcanos e alcenos. O quinto capítulo da tese prossegue com a síntese, caracterização e eficiência catalítica dos polioxotungstatos referidos anteriormente imobilizados numa matriz de sílica funcionalizada com iões césio (SiO2-Cs), grupos aminopropilo (SiO2–(CH2)3NH2) ou trietilpropilamónio (SiO2-(CH2)3N(Et)3). A actividade catalítica destes compostos foi estudada utilizando o cis-cicloocteno e ciclooctano como substratos padrão. A oxidação de cis-clicoocteno originou o epóxido com 100% de selectividade e o catalisador foi reutilizado durante 4 ciclos com elevada eficiência. No sexto capítulo, são descritas as metodologias experimentais de síntese dos novos compostos, as condições catalíticas, a instrumentação e demais métodos e procedimentos usados. No sétimo e último capítulo, tecem-se as conclusões finais e apresentam-se algumas perspectivas de trabalho futuro utilizando o sistema, POM/H2O2, usado neste trabalho.

Novos sistemas catalíticos baseados em óxidos de metais de transição

A presente dissertação descreve a síntese de novos sistemas catalíticos: (a) os complexos MoO2Cl2(pypzH), [MoO2Cl2(pypzH)]·pyHpzHCl, Mo2O4(μ2- O)Cl2(pypzH)2, MoO(O2)2Cl(pyHpzH), MoO2(OSiPh3)2(pypzH) (pypzH = 2-[3(5)- pirazolil]piridina), (η6-C6H5CH3)Mo(CO)3, (b) os materiais híbridos orgânicosinorgânicos PMO-ph suportados com as unidades Mo(CO)3 e Cr(CO)3, (c) e os complexos de inclusão CpMo(CO)3Cl@β-CD e CpMo(CO)3Cl@TRIMEB. Os novos sistemas catalíticos foram caracterizados utilizando os métodos de caracterização usuais (AE, FT-IR, Raman, NMR 1H) assim como os métodos de caracterização de estado sólido (XRD de pós, de cristal único, 13C e 29Si NMR CP MAS) e pela técnica microscópica de alta resolução (TEM). Os compostos com propriedades catalíticas e pré-catalíticas promissoras foram investigados nas reacções catalíticas de epoxidação de várias olefinas, nomeadamente o cis-cicloocteno.

Novel microporous silicates and mesoporous MCM materials derivatised with inorganic and organometallic complexes

Os materiais microporosos e mesoporosos são potenciais catalisadores heterogéneos. Os zeólitos e outros materiais microporosos do tipo zeolítico tradicionais, têm átomos tetracoordenados no esqueleto. Nos últimos anos, um vasto número de titanossilicatos contendo Ti(IV) hexacoordenado e Si(IV) tetracoordenado, com estruturas tridimensionais, têm sido alvo de grande interesse. Um dos objectivos desta tese foi preparar silicatos microporosos, contendo átomos metálicos com número de coordenação superior a quatro, e possuindo quer novas estruturas quer propriedades físicas e químicas interessantes. Neste contexto, foi preparado um novo ítriossilicato de sódio, AV-1, análogo do raro mineral montregianite, Na4K2Y2Si16O38·10H2O. Este material é o primeiro sólido microporoso que contem quantidades estequiométricas de sódio (e ítrio) no esqueleto. Foi, também, sintetizado um silicato de cério, AV-5, análogo estrutural do mineral montregianite com potencial aplicação em optoelectrónica. Nesta tese é, ainda, descrita a síntese e caracterização estrutural de um silicato de cálcio hidratado, AV-2, análogo do raro mineral rhodesite (K2Ca4Na2Si16O38.12H2O). Na continuação do trabalho desenvolvido em Aveiro na síntese de novos titanossilicatos surgiu o interesse de preparar novos zirconossilicatos microporosos por síntese hidrotérmica. Foram preparados dois novos materiais análogos dos minerais petarasite Na5Zr2Si3O18(Cl,OH)·2H2O (AV-3) e kostylevite, K2Si3O9·H2O (AV-8). Foram, também, obtidos análogos sintéticos dos minerais parakeldyshite e wadeite, por calcinação a alta temperatura de AV-3 e de umbite sintética. A heterogeneização de complexos organometálicos na superfície de materiais mesoporosos do tipo M41S permite associar a grande actividade catalítica e a presença de sítios activos localizados típicos dos complexos organometálicos, com a robustez e fácil separação, características dos materiais mesoporosos siliciosos. Nesta dissertação relata-se a derivatização dos materiais MCM-41 e MCM-48 através da reacção de [SiMe2{(h5-C5H4)2}]Fe e [SiMe2{(h5-C5H4)2}]TiCl2 com os grupos silanol das superfícies mesoporosas. Os materiais MCMs derivatizados com ansa-titanoceno foram testados na epoxidação de cicloocteno a 323 K na presença de hidrogenoperóxido de t-butilo. Estudou-se a heterogeneização dos sais de complexos com ligação metal-metal [Mo2(MeCN)10][BF4]4, [Mo2(m-O2CMe)2(MeCN)6][BF4]2 e [Mo2(m- O2CMe)2(dppa)2(MeCN)2][BF4]2 via imobilização nos canais do MCM-41. A imobilização dos catalisadores homogéneos na superfície do MCM-41 envolve a saída dos ligandos nitrilo lábeis, preferencialmente em posição axial, através da reacção com os grupos Si-OH da sílica. Verificou-se que a ligação Mo-Mo se mantém intacta nos produtos finais. É provável que estes materiais sejam eficientes catalisadores heterogéneos em reacções de polimerização. As técnicas de caracterização utilizadas nesta tese foram a difracção de raios-X de pós, a microscopia electrónica de varrimento, a espectroscopia de ressonância magnética nuclear do estado sólido (núcleos 13C, 23Na e 29Si), as espectroscopias de Raman e infravermelho com transformadas de Fourier, as análises termogravimétricas e as análises de adsorção de água e azoto.

Molybdenum eta(3)-allyl dicarbonyl complexes as a new class of precursors for highly reactive epoxidation catalysts with tert-butyl hydroperoxide

New Mo(II) diimine derivatives of [Mo(q (3)allyl)X(CO)(2)(CH3CN)(2)] (allyl = C3H5 and C5H5O; X = Cl, Br) were prepared, and [MO(eta(3)-C3H5)Cl(CO)(2)(BIAN)] (BIAN = 1,4-(4-chloro)phenyl-2,3-naphthalene-diazabutadiene) (7) was structurally characterized by single-crystal X-ray diffraction. This complex adopted an equatorial-axial arrangement of the bidentate ligand (axial isomer), in contrast with the precursors, found as the equatorial isomer in the solid and fluxional in solution. The new complexes of the type [Mo(eta(3)-allyl)X(CO)(2)(N-N)l (N-N is a bidentate chelating dinitrogen ligand) were tested for the catalytic epoxidation of cyclooctene using tert-butyl hydroperoxide as oxidant. All catalytic systems were 100% selective toward epoxide formation. While their turnover frequencies paralleled those of related Mo(eta) carbonyl compounds or Mo(VI) compounds bearing similar N-donor ligands, they exhibited similar olefin conversions in consecutive catalytic runs. The acetonitrile precursors were generally more active than the diimine complexes, and the chloro derivatives more active than the bromo ones. Combined vibrational and NMR spectroscopy and computational studies (DFT) were used to investigate the nature of the molybdenum species formed in the catalytic system with [Mo(eta(3)-C3H5)Cl(CO)(2){1,4-(2,6-dimethyl)phenyl-2.3-dimethyldiazabuta diene}] (4) and to propose that the resulting species may be dimeric bearing oxide bridges.

Immobilisation of eta(3)-allyidicarbonyl complexes of Mo-II with bidentate nitrogen ligands within aluminium-pillared clays

Molybdenum(II) complexes [MOX(CO)(2)(eta(3)-allyl)(CH3CN)(2)] (X = Cl or Br) were encapsulated in an aluminium-pillared natural clay or a porous clay heterostructure and allowed to react with bidentate diimine ligands. All the materials obtained were characterised by several solid-state techniques. Powder XRD, and Al-27 and Si-29 MAS NMR were used to investigate the integrity of the pillared clay during the modification treatments. C-13 CP MAS NMR, FTIR, elemental analyses and low-temperature nitrogen adsorption showed that the immobilisation of the precursor complexes was successful as well as the in situ ligand-substitution reaction. The new complex [MoBr(CO)(2)(eta(3)-allyl)(2-aminodipyridyl)] was characterised by single-crystal X-ray diffraction and spectroscopic techniques, and NMR studies were used to investigate its fluxional behaviour in solution. The prepared materials are active for the oxidation of cis-cyclooctene using tert-butyl hydroperoxide as oxidant, though the activity of the isolated complexes is higher. ((c) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2008).

Synthesis and catalytic epoxidation potentiality of oxodiperoxo molybdenum(VI) complexes with pyridine-2-carboxaldoxime and pyridine-2-carboxylate: the crystal structure of PMePh3[MoO(O-2)(2)(PyCO)]

[MoO(O-2)(2)(PyCOXH)(H2O)] and PMePh3[MoO(O-2)(2)(PyCO)] (PyCOXH = Pyridine-2-carboxaldoxime and PyCOH = Pyridine-2-carboxylic acid) have been synthesized. Both complexes have been characterized by physico-chemical and spectroscopic methods; in addition, the carboxylate complex has been structurally characterized by X-ray crystallography. The carboxylate complex is a more efficient catalyst than the oxime complex for epoxidation of olefins and shows excellent catalytic activity for the substrates: cyclooctene, cinnamyl alcohol, allyl alcohol and 1-hexene.

Nitrogen donor ligands bearing N-H groups: Effect on catalytic and cytotoxic activity of molybdenum eta(3)-allyldicarbonyl complexes

Reactions of [Mo(eta(3)-C3H5)Br(CO)(2)(NCMe)(2)] with the bidentate nitrogen ligands 2-(2'-pyridyl)imidazole (L1), 2-(2'-pyridyl)benzimidazole (L2), N,N'-bis(2'-pyridinecarboxamido)-1,2-ethane (L3), and 2,2'-bisimidazole (L4) led to the new complexes [Mo(eta(3)-C3H5)Br(CO)(2)(L)] (L = L1, 1; L2, 2; L4, 4) and [{Mo(eta(3)-C3H5) Br(CO)(2)}(2)(mu-L-3)] (3). The reaction of complexes 2 and 3 with Tl[CF3SO3] afforded [Mo(eta(3)-C3H5)(CF3SO3)(CO)(2)(L2)] (2T) and [{Mo(eta(3)-C3H5)(CF3SO3)(CO)(2)}(2)(mu-L-3)] (3T). Complexes 3 and 2T were structurally characterized by single crystal X-ray diffraction, showing the facial allyl/carbonyls arrangement and the formation of the axial isomer. In 2T, two molecules are assembled in a hydrogen bond dimer. The four complexes 1-4 were tested as precursors in the catalytic epoxidation of cyclooctene and styrene, in the presence of t-butylhydroperoxide (TBHP), with moderate conversions and turnover frequencies for complexes 1-3 and very low ones for 4. The increasing number of N-H groups in the complexes seems to be responsible for the loss of catalytic activity, compared with other related systems. The cytotoxic activities of all the complexes were evaluated against HeLa cells. The results showed that compounds 1,2,4, and 2T exhibited significant activity, complexes 2 and 2T being particularly promising. (C) 2008 Elsevier B.V. All rights reserved.

Divinyldisiloxane and divinylsilane complexes of rhodium(I)

Reaction of the tetrakis(cyclooctene)rhodium(I) complex [{Rh(C8H14-c)2(μ-Cl)}2] with the appropriate divinyldisiloxane molecules (ViSiR2)2O (R=Me or Ph) yields, by displacement of the cycloctene ligands, the complexes [{Rh(ViSiR2)2O(μ-Cl)}2] (R=Me (1) or Ph (2)). These react further with a tertiary phosphine PR3 to give cis-[Rh{(ViSiR2)2O}(PR′3)Cl] (R′=Ph or C6H4Me-p). The complex cis-[{Rh(Vi2SiMe2)(μ-Cl)}2] (7) was similarly prepared by the displacement of ethylene from [{Rh(C2H4)2(μ-Cl)}2] by the divinyldimethylsilane Vi2SiMe2. X-ray molecular structures of the crystalline complexes 1, 2 and 7 show a distorted square planar Rh(I) environment, the CH2CH groups being orthogonal to this plane; 1 and 2 have the Rh–(ViSiR2)2O metallacycle in the chair conformation, but differ in the nature of the central Rh(Cl)RhCl core, which is planar for 1 and puckered for 2, but each of 1 and 2 is the rac-diastereoisomer, whereas 7 has the meso-configuration. In solution 1 and 2 exist as a mixture of isomers, probably the rac- and meso-pairs as established by multinuclear NMR spectral studies. A series of saturation transfer NMR spectroscopic experiments showed that the divinyldisiloxane ligands in [{Rh(ViSiPh2)2O(μ-Cl)}2] underwent a dynamic process involving the dissociation, rotation and then reassociation of the vinyl groups.