Effect of juvenility on cutting propagation of red pitaya

Introduction. Pitaya (Hylocereus undatus) is an exotic fruit species little known in Brazil and which needs basic studies about plant nutrition, propagation and physiology. Emphasizing the co-existence of juvenile and adult stages in the pitaya canopy, the plant is generally propagated by cuttings. Materials and methods. A completely randomized design with four treatments and five replications was adopted. Each treatment was represented by the part of the canopy from which the cutting was taken ( upper, middle and lower cutting and cuttings from young plants). The following variables were registered: % cuttings with roots, % of live cuttings, root density, root diameter, root area, root length and root dry mass. Results were submitted to variance analyses, Tukey's test at 0.01 probability error and simple correlation analysis. Results and discussion. The results indicated that the position from which the cutting is taken had a quantitative effect on rooting formation of pitaya cuttings. Juvenile cuttings presented 35% more cuttings with roots than adult cuttings. Root density, root area, root length and root dry mass depended on juvenility, the highest results being registered for juvenile cuttings, independently of the variable. Conclusion. Juvenile and adult stages co-exist in the pitaya canopy. Juvenility is an important rooting factor for red pitaya cuttings.

Relationships between Indole-3-butyric Acid, Photoinhibition and Adventitious rooting of Corymbia torelliana, C. citriodora and F1 Hybrid Cuttings

Rooted cutting propagation is widely used for maximising tree yield, quality and uniformity in conjunction with clonal selection. Some eucalypt species are deployed as rooted cuttings but many are considered to difficult to root. This study examined IBA effects on photoinhibition, root formation, mortality and root and shoot development in cuttings of Corymbia torelliana, C. citriodora and their hybrids. IBA had little or no effect on photoinhibition but it had strong, dose-dependent effects on root formation and mortality. IBA frequently increases primary root number of rooted cutting but it did not increase total root weight, length, surface area or volume, possibly because the highest doe (8g IBA/kg IBA/kg powder) caused leaf abscission and sometimes reduced leaf area (by 55-79%)or shoot dry weight (by 40-58%). An intermediate dose (3g IBA/kg powder) most consistnely improved root formation with little or no effect on mortality or shoot development. Across the F1 hybrid families this treatment increased the number of rooted cuttings by 72-121% and more than ddoubled the number of primary roots per rooted cutting (from 1.1-1.7 roots to 3.5-4.1 roots). This simple treatment will facilitate commercial multiplication of superior individuals or selected families of C. torelliana x C. citriodora through a vegetative propagation system.

Havupuiden erikoismuotojen lisäysmenetelmät

Havupuiden erikoismuotoja on käytetty koristekasveina jo vuosisatoja ympäri maailmaa. Niitä on lisätty pääsääntöisesti pistokkaista ja varttamalla. Suomessa kotimaisten metsäpuidemme erikois-muotoja on kartoitettu ja kerätty kokoelmiin järjestelmällisemmin 1960-luvulta alkaen. Taimisto-viljelijät, puutarhasuunnittelijat ja kotipuutarhurit ovat olleet enenevässä määrin kiinnostuneita näistä kotimaisista kestävistä havukasveista. Yli 90 prosenttia markkinoillamme olevista havukas-veista tuodaan ulkomailta, joten on selvää, että niiden talvenkestävyydessä on ongelmia. Tämän tutkimuksen tavoitteena oli selvittää kotimaisille erikoismuodoille sopivia lisäysmene-telmiä ja siten edistää kotimaisen havukasvituotannon mahdollisuuksia. Aineistona kokeissa oli kotimaisia erikoismuotoja metsäkuusesta (Picea abies (L.) Karsten) ja kotikatajasta (Juniperus communis L.), tavallisia metsäkuusia sekä kahdeksan ulkomaista havupuutaksonia. Lisäysmene-telmistä tutkittiin varttamista ja pistokaslisäystä ja kokeet suoritettiin Metsäntutkimuslaitoksen toimipaikoissa Lopen Haapastensyrjässä sekä Punkaharjulla. Varttamiskokeessa vertailtiin koti-maisen kuusen erikoismuotokloonien varttamisen onnistumista. Pistokaskokeissa tutkittiin geno-tyypin, emopuun iän, pistokasoksan sijainnin sekä hormonikäsittelyn vaikutusta havukasvien pis-tokkaiden juurtumiseen. Tavalliset metsäkuuset toimivat kontrolleina. Tutkimus osoitti, että varttaminen onnistui erinomaisesti kaikilla erikoismuotoklooneilla. Ovat-ko vartteet esteettisesti katsottuna koristekäyttöön sopivia, jää vielä seurattavaksi. Pistokaskokeis-sa havaittiin, että juveniilisuus vaikutti pistokkaiden juurtumiseen, mutta iäkkäistäkin puista lisää-minen onnistuu, kunhan genotyyppi on sopiva. Keskimäärin alaoksat juurtuivat paremmin kuin latvuksen yläosista otetut pistokasoksat, mutta vain yhdellä kloonilla ero oli tilastollisesti merkit-sevä. Hormonikäsittely heikensi selvästi kotimaisen kuusen ja katajan pistokkaiden juurtumista, mutta ulkomaisiin havupuulajeihin käsittelyllä ei ollut vaikutusta. Kotimaisen havukasvituotannon pohjaksi pitäisi tehdä kloonivalintaa, jossa koristearvon lisäksi otettaisiin huomioon myös kloonin lisättävyys. Taimien tuottaminen pistokkaista on selvästi edul-lisempaa kuin vartteiden tuottaminen, joskin varte kasvaa myyntikuntoon nopeammin kuin pisto-kastaimi. Pistokastaimi on kuitenkin omajuurinen ja stabiilimpi kasvutavaltaan kuin varte. Tämä korostuu etenkin kääpiömuotoja tuotettaessa.

2,6-di-hidroxiacetofenona no enraizamento de estacas semilenhosas de pessegueiro

A propagação do pessegueiro no Brasil baseia-se na enxertia de cultivares-copa em porta-enxertos propagados por sementes, e uma alternativa de propagação para esta frutífera poderia ser a estaquia. O objetivo deste trabalho foi avaliar o potencial de enraizamento de estacas semilenhosas de cultivares de pessegueiro através da aplicação de 2,6-di-hidroxiacetofonona (2,6-DHAP) antes do tratamento com AIB (ácido indolbutírico). As estacas foram preparadas a partir de ramos coletados das cultivares Delicioso Precoce, Jóia 1 e Okinawa, em dezembro de 2001, para serem tratadas na base com 2,6-DHAP (0 e 300mg L-1), por 4h, em aeração e depois com AIB (200mg L-1 e 2500mg L-1). As estacas foram plantadas em bandejas de poliestireno expandido com vermiculita fina e colocadas em casa de nebulização, por 45 dias. A aplicação de 300mg L-1 de 2,6-DHAP antes da aplicação de 200mg L-1 de AIB em estacas de 'Okinawa' proporcionou aumentos nos resultados das características de maior relevância para a propagação por estacas e pode ser uma técnica interessante para a estaquia em pessegueiro.

Enraizamento de estacas herbáceas de diferentes espécies de maracujazeiro

O trabalho foi realizado na Área de Propagação de Fruteiras do Departamento de Produção Vegetal da Faculdade de Ciências Agrárias e Veterinárias, Universidade Estadual Paulista (FCAV/UNESP), em Jaboticabal-SP, com o objetivo de verificar a possibilidade de obtenção de mudas por estaquia de maracujá (Passiflora spp.), nas espécies comerciais P. edulis Sims f. flavicarpa Degener e P. alata Dryander, e nos porta-enxertos P. giberti N.E.Brown, P. nitida H.B.K. e P. setacea D.C. O experimento foi realizado no período de junho de 2000 a junho de 2001, em câmara de nebulização intermitente, em condições de telado (50% de sombreamento). As estacas foram coletadas de plantas adultas, oriundas do Banco de Germoplasma Ativo (BAG) do Departamento de Produção Vegetal da FCAV/UNESP e de pomares comerciais, no caso a espécie P. edulis f. flavicarpa, coletando-se a parte intermediária de ramos em estádio de crescimento vegetativo, preparando-se estacas herbáceas com, aproximadamente, 15cm de comprimento, três nós e duas folhas reduzidas ao meio, coletadas em junho e outubro de 2000, e abril de 2001. As estacas foram tratadas com ácido indolbutírico (IBA) nas concentrações de 500; 1.000 e 2.000mg.L-1, por cinco segundos, e sem tratamento (testemunha), e plantadas em bandejas plásticas (40x30x10cm), com vermiculita de textura média, por 60 dias. A percentagem de enraizamento foi maior na espécie P. edulis f. flavicarpa (76,7%), na primavera. A P. giberti e a P. nitida enraizaram na primavera e no inverno, e a P. alata em todas as épocas estudadas. A P. setacea não enraizou. A sobrevivência, o número e o comprimento de raízes foram maiores na primavera.

2,6-Di-hidroxiacetofenona e tipo de corte basal no enraizamento de estacas semi-lenhosas de pessegueiro Okinawa

A propagação do pessegueiro (Prunus persica) no Brasil é baseada na enxertia sobre porta-enxertos oriundos de sementes. Outros métodos de propagação de frutíferas poderiam ser utilizados para o pessegueiro visando obtenção de materiais de melhor qualidade. Neste trabalho objetivou-se avaliar o efeito do 2,6-di-hidroxiacetofenona aplicado previamente ao ácido indol-butírico em estacas semi-lenhosas de pessegueiro da cultivar Okinawa preparadas com diferentes tipos de corte basal. Foram coletados ramos do porta-enxerto Okinawa em dezembro de 2001 para o preparo das estacas sem folhas, com 12cm de comprimento, 7mm de diâmetro, quatro gemas e diferentes tipos de cortes basais (corte longitudinal, corte lateral e corte da casca) tratado-as na base com 0 e 300mg L-1 de 2,6-di-hidroxiacetofenona por 4h em aeração (oxigenação) e depois com 2500mg L-1 ácido indol-butírico por 5s. As estacas foram plantadas em bandejas de poliestireno expandido (72 células) com vermiculita fina e colocadas em casa de nebulização por 45 dias. A aplicação de 300mg L-1 de 2,6-DHAP e a realização de lesões nas bases das estacas foram eficientes para aumentar o enraizamento das estacas semi-lenhosas do pessegueiro Okinawa , demonstrando que estas técnicas podem ser utilizadas para a propagação de pessegueiro por estaquia.

Propagação de sapotizeiro (Manilkara zapota L.) por estaquia

Two sapoti tree accesses (Manilkara zapota), native plants of south of Mexico and of America Central, belonging to the Collection of Fruitful Native and Exotic of UNESP/FCAV, Jaboticabal Campus, was studied with relationship to the cutting propagation. The first test consisted of fast immersion of cutting base semi-herbaceous foliage of selected accesses FCAV-III and FCAV-VII. The ttreatments were alcoholic solution (50%) of indolbutiric acid (IBA) in concentrations of 0, 1,000, 3,000, 5,000 and 7,000 mgL(-1). and the cuttings preparing with and without latex exudate washing for a period of 14 hours in recipient with pure water. This trial was set in 5 x 2 x 2 factorial scheme (IBA concentrations x accesses x cutting preparation) The second test consisted the herbaceous foliage immersion of FCAV-III access in IBA concentrations above. Both experiments were distributed in randomized design with four replications and 10 cuttings each. All cuttings were collected in spring and prepared with about 12 cm of length, planted in medium texture vermiculite and carried under conditions intermittent mist spray flashing in chamber with 50% light. The two accesses tested not rooted and treatments were not able to induce the roots emission.

Pitaya: propagação e crescimento de plantas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Adventitious root formation in Grevillea (Proteaceae), an Australian native species

Grevillea (Proteaceae) is a native Australian plant genus with high commercial value as landscape ornamentals. There has been limited research on the culture and propagation of Australian native species. The effect of indole-3-butyric acid (IBA) on the rooting of G. 'Royal Mantle' and G. 'Coastal Dawn' in winter, spring and summer was evaluated at University of Queensland Gatton, Southern Queensland in order to determine the rooting ability of this species in different seasons. Both Grevillea cultivars showed seasonal rooting. The more difficult-to-root G. 'Coastal Dawn' had a reduced response to IBA application than G. 'Royal Mantle'. Stem and leaf indole-3-acetic acid (IAA) levels were not different between cultivars, therefore rooting ability between the two cultivars does not appear to be due to the differences in endogenous IAA levels. (c) 2005 Elsevier B.V. All rights reserved.

Noise propagation from a cutting of arbitrary cross-section and impedance

A boundary integral equation is described for the prediction of acoustic propagation from a monofrequency coherent line source in a cutting with impedance boundary conditions onto surrounding flat impedance ground. The problem is stated as a boundary value problem for the Helmholtz equation and is subsequently reformulated as a system of boundary integral equations via Green's theorem. It is shown that the integral equation formulation has a unique solution at all wavenumbers. The numerical solution of the coupled boundary integral equations by a simple boundary element method is then described. The convergence of the numerical scheme is demonstrated experimentally. Predictions of A-weighted excess attenuation for a traffic noise spectrum are made illustrating the effects of varying the depth of the cutting and the absorbency of the surrounding ground surface.

Genetic control of propagation traits in a single Corymbia torelliana x Corymbia variegata family

Genetic control of vegetative propagation traits was described for a second-generation, outbred, intersectional hybrid family (N = 208) derived from two species, Corymbia torelliana (F. Muell.) K.D. Hill & L.A.S. Johnson and Corymbia variegata (F. Muell.) K.D. Hill & L.A.S. Johnson, which contrast for propagation characteristics and in their capacity to develop lignotubers. Large phenotypic variances were evident for rooting and most other propagation traits, with significant proportions attributable to differences between clones (broad-sense heritabilities 0.2-0.5). Bare root assessment of rooting rate and root quality parameters tended to have the highest heritabilities, whereas rooting percentage based on root emergence from pots and shoot production were intermediate. Root biomass and root initiation had the lowest heritabilities. Strong favourable genetic correlations were found between rooting percentage and root quality traits such as root biomass, volume, and length. Lignotuber development on a seedling was associated with low rooting and a tendency to poor root quality in cuttings and was in accord with the persistence of species parent types due to gametic phase disequilibrium. On average, nodal cuttings rooted more frequently and with higher quality root systems, but significant cutting type x genotype interaction indicated that for some clones, higher rooting rates were obtained from tips. Low germination, survival of seedlings, and rooting rates suggested strong hybrid breakdown in this family.

Development of mechanical methods for cell-tray propagation and field transplanting of dwarf napiergrass (Pennisetum purpureum Schumach.)

Since dwarf napiergrass (Pennisetum purpureum Schumach.) must be propagated vegetatively due to lack of viable seeds, root splitting and stem cuttings are generally used to obtain true-to-type plant populations. These ordinary methods are laborious and costly, and are the greatest barriers for expanding the cultivation area of this crop. The objectives of this research were to develop nursery production of dwarf napiergrass in cell trays and to compare the efficiency of mechanical versus manual methods for cell-tray propagation and field transplanting. After defoliation of herbage either by a sickle (manually) or hand-mowing machine, every potential aerial tiller bud was cut to a single one for transplanting into cell trays as stem cuttings and placed in a glasshouse over winter. The following June, nursery plants were trimmed to a 25–cm length and transplanted in an experimental field (sandy soil) with 20,000 plants ha^(−1) either by shovel (manually) or Welsh onion planter. Labour time was recorded for each process. The manual defoliation of plants required 44% more labour time for preparing the stem cuttings (0.73 person-min. stemcutting^(−1)) compared to using hand-mowing machinery (0.51 person-min. stem-cutting^(−1)). In contrast, labour time for transplanting required an extra 0.30 person-min. m^(−2) (14%) using the machinery compared to manual transplanting, possibly due to the limited plot size for machinery operation. The transplanting method had no significant effect on plant establishment or plant growth, except for herbage yield 110 days after planting. Defoliation of herbage by machinery, production using a cell-tray nursery and mechanical transplanting reduced the labour intensity of dwarf napiergrass propagation.

Evaluation and development of passion fruit (Passiflora alata Dryander) propagated by cutting and seet in conditions of commercial orchard

The present work was conducted in a fruit tree propagation area of the Plant Production Department of the Faculdade de Ciencias Agrarias e Veterinarias, Universidade Estadual Paulista (FCAV/UNESP) in Jaboticabal, SP, and also in a commercial orchard in Araguari, MG, with the objective to verify the potential of vegetative growth (stem diameter, height of plants and leaf number) of plants of passion fruit (Passiflora alata Dryander), gotten by cutting and seed, comparing the initial development of plants in the field. This experiment was carried out from January 2002 to February 2003. The experiment using seeds was conducted at a shadow house, and the one that used cuttings in an intermitent mist. The cuttings and seeds were collected from adult plants which came from Passifloraceae Active Germoplasm Bank (BAG) of the Plant Production Department of FCAC/UNESP. For the cuttings, it was used the intermediate part of the branches in stadium of vegetative growth. The seeds, in order to obtain the seedlings, had been sown in plastic trays. Cuttings and seedlings were transplanted to plastic bags with substrate in shadow house and with daily irrigation. They were acclimatized and planted on field, after 60 days. on field, the stem diameter, plant height and number of leaves were better for cuttings than for seedlings in Jaboticabal, SP. In Araguari, MG, stem diameter was larger in the seedlings, which plant heights and number of leaves were larger on cuttings.

Propagation of Camptosema grandiflorum native to Brazil by seeds and cuttings

Camptosema grandiflorum Benth., belonging to Fabaceae, is a voluble climber plant native to Brazil. Plants bloom in autumn-winter, producing long and hanging inflorescences with showy red flowers, which are much visited by hummingbirds. The leaves are also attractive, composed by three leaflets. It can be propagated by seeds or cuttings, but both seed germination and cutting rooting percentages are very low. Thus, the objective of this work was to study the effect of different temperatures on seed germination and of different indolebutyric acid (IBA) concentrations on the rooting of cuttings of C. grandiflorum. The experiment was set up at the São Paulo State University, located in Jaboticabal, São Paulo State, Brazil. The germination study was conducted in an entirely randomized design with six different temperatures (constant at 20, 25, 30 and 35°C; and alternated at 20-30 and 25-35°C, with a photoperiod of 12 hours) and four replications of 25 seeds each, placed in plastic boxes with vermiculite. The percentage of germination and the speed germination index (SGI) were evaluated. An entirely randomized block design was adopted for the cutting rooting evaluation, with four IBA concentrations (0; 1,000; 2,000; and 3,000 mg kg-1) and five replications of ten cuttings each, comprising 200 cuttings. After 30 days from the beginning of the rooting experiment, data referring to rooting percentage, number and length of roots and dry weight of roots were collected. For the seed germination experiment, fastest germination and highest germination percentage (87%) were obtained when seeds were maintained under the constant temperature of 30°C. For the cutting experiment, the concentrations of 2,000 and 3,000 mg kg-1 of IBA promoted the highest rooting percentages (98.5 and 94.1%, respectively) and number of roots. There were no statistical differences among the IBA concentrations for length of roots and dry weight of roots.

Delegation Proxies: The Power of Propagation

Scoping behavioral variations to dynamic extents is useful to support non-functional requirements that otherwise result in cross-cutting code. Unfortunately, such variations are difficult to achieve with traditional reflection or aspects. We show that with a modification of dynamic proxies, called delegation proxies, it becomes possible to reflectively implement variations that propagate to all objects accessed in the dynamic extent of a message send. We demonstrate our approach with examples of variations scoped to dynamic extents that help simplify code related to safety, reliability, and monitoring.