Território quilombola do Curiaú e área de proteção ambiental do Rio Curiaú: interpretações dos conflitos socioambientais pela economia ecológica

Aborda um estudo sobre as relações sociais, econômicas, ambientais e políticas no território quilombola do Curiaú, município de Macapá, estado do Amapá. A pesquisa tem como objetivo analisar as regras do sistema de uso comum das famílias quilombolas, considerando os conflitos socioambientais ocorridos no território em função da pressão da cidade numa perspectiva da economia ecológica. O trabalho fundamentou-se na pesquisa de campo, com aplicação de 55 formulários entre os meses de junho e agosto de 2006. A presença de novas regras de uso no território quilombola em função da criação da Área de Proteção Ambiental do Curiaú tem contribuído para a pressão sobre os recursos naturais disponíveis no ecossistema local. Foi possível observar alterações nas regras de uso comum dos recursos pelas famílias em função da pressão do mercado, assim como pela instauração de políticas públicas ambientais e programas de governo limitando o uso comum dos recursos. Verifica-se , por fim, a necessidade de fortalecer o debate sobre o uso dos recursos naturais e a importância desses para a manutenção e a sobrevivência das famílias do quilombo do Curiaú.

Cultura, territorialidade e desenvolvimento local: o caso da APA do rio Curiaú no Amapá

Esta pesquisa tem como objetivo analisar a relação entre fortalecimento e valorização cultural e a promoção do desenvolvimento local na Área de Proteção Ambiental (APA) do Rio Curiaú no Amapá. Imbricada de interesses diversos e conflitos instigantes, esta relação presume a identificação de territorialidades como um elemento teórico e empírico importante para o entendimento da problemática proposta. Nesse sentido, serão abordadas, em conjunto com a dimensão cultural, as dimensões políticas, econômicas e ambientais que são pertinentes à esta área protegida. Isso porque a mesma está sobreposta a um Território Quilombola (TQ) e resulta, assim, em um espaço profícuo para a elaboração de um análise científica que vise a compreensão do desenvolvimento nestas condições.

Genetical-demographic data from two amazonian populations composed of descendants of african slaves: Pacoval and Curiau

The Amazon region of Brazil includes communities founded by escaped slaves, some of which still remain relatively isolated. We studied two such Afro-Brazilian communities (Pacoval and Curiau), in the rural area of Alenquer, Pará, and in the metropolitan region of Macapá, Amapá, respectively. Among 12 blood loci, alleles considered as markers of African ancestry, such as HBB*S, HBB*C, TF*D1, HP*2M, ABO*B, RH*D-, and CA2*2 were found at frequencies that are expected for populations with a predominantly African origin. Estimates of interethnic admixture indicated that the degree of the African component in Curiau (74%) is higher than that of Pacoval (44%); an Amerindian contribution was not detected in Curiau. Estimated values of African ancestry fit well with the degree of isolation and mobility of the communities. Pacoval exhibited a high proportion of immigrants among the parents and grandparents of the individuals studied, whereas persons living in Curiau exhibited a low level of mobility, despite its location in the metropolitan area of Macapá city, suggesting a relatively strong barrier against the interethnic admixture in this population. In addition, analysis of genetic data in a sub-sample consisting of individuals whose parents and grandparents were born in the study site, and that probably represents the populations two generations ago, indicated that gene flow from non-black people is not a recent event in both populations.

The nature of errors made by drivers [Austroads Publication no: AP-R378-11]

It is important that we understand the factors and conditions that shape driver behaviour – those conditions within the road transport system that contribute to driver error and the situations where driver non-compliance to road regulations is likely. This report presents the findings derived from a program of research investigating the nature of errors made by drivers, involving a literature review and an on-road study. The review indicates that, despite significant investigation, the role of different error types in road traffic crashes remains unclear, as does the role of the wider road transport system failures in driver error causation.

Non-wearing of adult seat belts in Australia: Where to next? [Austroads Publication No. AP-R346/09]

Seat belts are one of the most effective passive safety features in vehicles and there is a host of research literature attesting to the effectiveness of seat belts in protecting against death and injury. Even when use rates are high the potential gains in trauma reduction from further improvements in wearing rates are substantial. However, those currently most resistant to restraint use have also proven most difficult to target using conventional countermeasures. It is necessary to address the issues of non-wearing in order to achieve further gains in seat belt wearing. This study provide evidence-based recommendations for the way forward to tackle the problems of adult restraint non-use in light passenger vehicles in the short, medium and longer term in Australia. While there are substantial issues to be addressed for these groups, these are outside the scope of this study.

(Ap)pointing the canon Rousseau's Émile, visions of the state, and education

Jean-Jacques Rousseau’s Émile, ou de I’Education (Émile, or on Education) has been described by Rousseau scholars in latter twentieth century English-language philosophy as an educational classic. In 1995 Robert Wokler argued that together with Montesquieu, Hume, Smith, and Kant among his contemporaries, Rousseau had exerted the most profound influence on modern European intellectual history, “perhaps even surpassing anyone else of his day." For Wokler Émile is “the most significant work on education after Plato’s Republic.” Earlier in 1977, Allan Bloom questioned why Émile had not been the subject of analysis in philosophy relative to the rest of Rousseau‘s work, for “Émile is truly a great book, one that lays out for the first time and with the greatest clarity and vitality the modern way of posing the problems of psychology.” Bloom also saw Émile as “one of those rare total or synoptic books... a book comparable to Plato’s Republic, which it is meant to rival or supersede” and argued that Rousseau himself was at the source of a new tradition: “Whatever else Rousseau may have accomplished, he presented alternatives available to man more comprehensively and profoundly and articulated them in the form which has dominated discussion since his time." Even Peter Gay’s earlier commentary on John Locke and education in 1964 could not escape this central positioning of the text. The significance of Locke’s Some Thoughts on Education is weighed in relation to its impact on Rousseau‘s Émile. For Gay, the latter is “probably the most influential revolutionary tract on education that we have.”

Thermal decomposition and combustion of ammine: AP pellets

Thermal decomposition and combustion of lithium perchlorate ammine:ammonium perchlorate (LPA:AP) and magnesium perchlorate ammine:ammonium perchlorate (MPA:AP) pellets have been studied using DTA, TG, and strand burner techniques. The DTA results of the ammine:AP pellets show that the addition of ammines lowers the ignition temperature of AP. However, isothermal TG of the ammine:AP pellets show that in the case of LPA:AP pellets the extent of decomposition increases with the increase in the concentration of LPA; whereas in the case of MPA:AP pellets the extent of decomposition decreases with the increase in the concentration of MPA. Similarly, LPA:AP pellets show higher burning rates compared to AP pellets. On the other hand, MPA:AP pellets show lower burning rates compared to AP pellets. Increasing the concentration of MPA in MPA:AP pellets completely suppresses the combustion. These results are explained on the basis of the thermal characteristics of the additives and their decomposition products.

Influence of Lithium Fluoride on the Burning Rate of AP-Polyester Propellant

THE addition of catalysts normally serves the purpose of imparting a desired burning rate change in a composite propellant. These may either retard or enhance the burning rate. Some often quoted catalysts are oxides, chromites and chromates of metals. A lot of work has been done on rinding the effect of the addition of some of these catalysts on the burning rate; however, none seems to have appeared on the influence of lithium fluoride (LiF). Only qualitative reduction in the burning rate of composite propellants with the addition of LiF was reported by Williams et al.1 Dickinson and Jackson2 reported a slight decrease in the specific impulse of composite propellant with the addition of LiF; however, they made no mention of the effect of its addition on the burning rate. We have studied the effect of the addition of varying amounts of LiF on the burning rate of Ammonium Perchlorate (AP)-Polyester propellant.

The effect of lecithin on the burning rate of AP-Al---polyester propellant

Abstract is not available.

Free and ATP-bound structures of Ap(4)A hydrolase from Aquifex aeolicus V5

Asymmetric diadenosine tetraphosphate (Ap(4)A) hydrolases degrade the metabolite Ap(4)A back into ATP and AMP. The three-dimensional crystal structure of Ap(4)A hydrolase (16 kDa) from Aquifex aeolicus has been determined in free and ATP-bound forms at 1.8 and 1.95 angstrom resolution, respectively. The overall three-dimensional crystal structure of the enzyme shows an alpha beta alpha-sandwich architecture with a characteristic loop adjacent to the catalytic site of the protein molecule. The ATP molecule is bound in the primary active site and the adenine moiety of the nucleotide binds in a ring-stacking arrangement equivalent to that observed in the X-ray structure of Ap(4)A hydrolase from Caenorhabditis elegans. Binding of ATP in the active site induces local conformational changes which may have important implications in the mechanism of substrate recognition in this class of enzymes. Furthermore, two invariant water molecules have been identified and their possible structural and/or functional roles are discussed. In addition, modelling of the substrate molecule at the primary active site of the enzyme suggests a possible path for entry and/or exit of the substrate and/or product molecule.

Analysis of the impact of a uracil DNA glycosylase attenuated in AP-DNA binding in maintenance of the genomic integrity in Escherichia coli

Uracil DNA glycosylase (Ung)initiates the uracil excision repair pathway. We have earlier characterized the Y66W and Y66H mutants of Ung and shown that they are compromised by similar to 7- and similar to 170-fold, respectively in their uracil excision activities. In this study, fluorescence anisotropy measurements show that compared with the wild-type, the Y66W protein is moderately compromised and attenuated in binding to AP-DNA. Allelic exchange of ung in Escherichia coli with ung::kan, ungY66H:amp or ungY66W:amp alleles showed similar to 5-, similar to 3.0- and similar to 2.0-fold, respectively increase in mutation frequencies. Analysis of mutations in the rifampicin resistance determining region of rpoB revealed that the Y66W allele resulted in an increase in A to G (or T to C) mutations. However, the increase in A to G mutations was mitigated upon expression of wild-type Ung from a plasmid borne gene. Biochemical and computational analyses showed that the Y66W mutant maintains strict specificity for uracil excision from DNA. Interestingly, a strain deficient in AP-endonucleases also showed an increase in A to G mutations. We discuss these findings in the context of a proposal that the residency of DNA glycosylase(s) onto the AP-sites they generate shields them until recruitment of AP-endonucleases for further repair.

Online client-AP association in WLANs

In many IEEE 802.11 WLAN deployments, wireless clients have a choice of access points (AP) to connect to. In current systems, clients associate with the access point with the strongest signal to noise ratio. However, such an association mechanism can lead to unequal load sharing, resulting in diminished system performance. In this paper, we first provide a numerical approach based on stochastic dynamic programming to find the optimal client-AP association algorithm for a small topology consisting of two access points. Using the value iteration algorithm, we determine the optimal association rule for the two-AP topology. Next, utilizing the insights obtained from the optimal association ride for the two-AP case, we propose a near-optimal heuristic that we call RAT. We test the efficacy of RAT by considering more realistic arrival patterns and a larger topology. Our results show that RAT performs very well in these scenarios as well. Moreover, RAT lends itself to a fairly simple implementation.

Chemistry of the incomplete decomposition of ammonium perchlorate (AP)

Results are presented to show that as the thermal decomposition of orthorhombic ammonium perchlorate proceeds there is an accumulation, in the solid, of hydrochloric and nitric acids, the concentrations of which increase up to 15% decomposition after which they decrease until they reach the original values.

Processing map for controlling microstructure in hot working of hot isostatically pressed powder metallurgy NIMONIC AP-1 superalloy

The hot deformation behavior of hot isostatically pressed (HIP) NIMONIC AP-1 superalloy is characterized using processing maps in the temperature range 950-degrees-C to 1200-degrees-C and strain rate range 0.001 to 100 s-1. The dynamic materials model has been used for developing the processing maps which show the variation of the efficiency of power dissipation given by [2m/(m +1)] with temperature and strain rate, with m being the strain rate sensitivity of flow stress. The processing map revealed a domain of dynamic recrystallization with a peak efficiency of 40 pct at 1125-degrees-C and 0.3 s-1, and these are the optimum parameters for hot working. The microstructure developed under these conditions is free from prior particle boundary (PPB) defects, cracks, or localized shear bands. At 100 s-1 and 1200-degrees-C, the material exhibits inter-crystalline cracking, while at 0.001 s-1, the material shows wedge cracks at 1200-degrees-C and PPB cracking at 1000-degrees-C. Also at strain rates higher than 10 s-1, adiabatic shear bands occur; the limiting conditions for this flow instability are accurately predicted by a continuum criterion based on the principles of irreversible thermodynamics of large plastic flow.