An efficient algorithm for partitioning parameterized polygons into rectangles

In this paper, we propose an algorithm for partitioning parameterized orthogonal polygons into rectangles. The algorithm is based on the plane-sweep technique and can be used for partitioning polygons which contain holes. The input to the algorithm consists of the contour of a parameterized polygon to be partitioned and the constraints for those parameters which reside in the contour. The algorithm uses horizontal cuts only and generates a minimum number of rectangles whose union is the original orthogonal polygon. The proposed algorithm can be used as the basis to build corner stitching data structure for parameterized VLSI layouts and has been implemented in Java programming language. Copyright © 2010 ACM, Inc.

Trapezoidal cross-sectional influence on FinFET threshold voltage and corner effects

Fin field effect transistors (FinFETS) are silicon-on-insulator (SOI) transistors with three-dimensional structures. As a result of some fabrication-process limitations (as nonideal anisotropic overetch) some FinFETs have inclined surfaces, which results in trapezoidal cross sections instead of rectangular sections, as expected. This geometric alteration results in some device issues, like carrier profile, threshold voltage, and corner effects. This work analyzes these consequences based on three-dimensional numeric simulation of several dual-gate and triple-gate FinFETs. The simulation results show that the threshold voltage depends on the sidewall inclination angle and that this dependence varies according to the body doping level. The corner effects also depend on the inclination angle and doping level. (C) 2008 The Electrochemical Society.

Thermodynamic Assessment of the Aluminum Corner of the Al-Fe-Mn-Si System

A new assessment of the aluminum corner of the quaternary Al-Fe-Mn-Si system has been made that extends beyond the COST-507 database. This assessment makes use of a recent, improved description of the ternary Al-Fe-Si system. In the present work, modeling of the Al-rich corner of the quaternary Al-Fe-Mn-Si system has been carried out by introducing Fe solubility into the so-called alpha-AlMnSi and beta-AlMnSi phases of the Al-Mn-Si system. A critical review of the data available on the quaternary system is presented and used for the extension of the description of these ternary phases into the quaternary Al-Fe-Mn-Si.

Corner connection detail, Sunshine Coast University Library, Maroochydore

Detailed external view of north-west elevation corner.

Steel cladding to south-east corner, Sunshine Coast University Library, Maroochydore

View to south-east corner, clad in corrugated steel sheeting with colonnade below.

North-east corner elevation, Sunshine Coast University Library, Maroochydore

View to north-east corner elevation, with entrance stair and timber batten screen to verandah.

Optimisation and design of post-tensioning anchorage corner blisters in concrete box girder bidges

The design of anchorage blisters of internal continuity post-tensioning tendons of bridges built by the cantilever method, presents some peculiarities, not only because they are intermediate anchorages but also because these anchorages are located in blisters, so the prestressing force has to be transferred from the blister the bottom slab and web of the girder. The high density of steel reinforcement in anchorage blisters is the most common reason for problems with concrete cast in situ, resulting in zones with low concrete compacity, leading to concrete crushing failures under the anchor plates. A solution may involve improving the concrete compression and tensile strength. To meet these requirements a high-performance fibre reinforced self-compacting mix- ture (HPFRC) was used in anchorage corner blisters of post-tensioning tendons, reducing the concrete cross-section and decreasing the reinforcement needed. To assess the ultimate capacity and the adequate serviceability of the local anchorage zone after reducing the minimum concrete cross-section and the confining reinforcement, specified by the anchorage device supplier for the particular tendon, load transfer tests were performed. To investigate the behaviour of anchorage blisters regarding the transmission of stresses to the web and the bottom slab of the girder, and the feasibility of using high performance concrete only in the blister, two half scale models of the inferior corner of a box girder existing bridge were studied: a reference specimen of ordinary reinforced concrete and a HPFRC blister specimen. The design of the reinforcement was based in the tensile forces obtained on strut-and-tie models. An experimental program was carried out to assess the models used in design and to study the feasibility of using high performance concrete only in the blister, either with casting in situ, or with precast solutions. A non-linear finite element analysis of the tested specimens was also performed and the results compared.

Gerdy tubercle osteotomy in surgical approach of posterolateral corner of the knee.

Posterolateral corner (PLC) injuries of the knee are uncommon injury patterns that may result in significant degrees of functional disability. When surgery is necessary to address this injury a good knowledge of anatomy and a good surgical exposure is the mainstay. This report reviews the complex anatomy of the posterolateral corner (PLC) of knee and describes the osteotomy of Gerdy tubercle as a technical variant to approach this anatomical region. This surgical step allowing a good mobilisation of the multiple layers of ilio-tibial tract from distal to proximal makes an excellent exposure of the PLC structures with absence of morbidity.

Jurassic sedimentary record and tectonic evolution of the northwestern corner of Africa

The history of the opening seaway from the westernmost Tethys to the Central Atlantic is traced by the analysis of the sedimentary facies development in the external Rif basin of Northern Morocco and the geological and seismic data from the Moroccan Atlantic continental margin. In the Rif basin, after the early Sinemurian, sedimentary facies dated by ammonites, foraminifers and brachiopods, indicate a progression of rapid subsidence resulting from extensional tectonic (tilted blocks, escarpment fault breccias, neptunian dykes etc.) from the N and NE to the S and SW. From the Toarcian to the Bajocian, deltas progress from the W and SW into the `'Rides sud-rifaines'' realm. From the late Bathonian to the Oxfordian, deep-sea fans develop in the external Rif. During the same period, deltaic sediments fill in the Middle Atlas basin of Eastern Morocco and progress into the external Rif. The top of the Jurassic is characterised by carbonate deposits. At the northwestern corner of Africa, the subsidence of the sedimentary basins by rifting is initiated in the late Triassic; however, at the Mazagan transect of the Atlantic continental margin, the tectonic pattern characteristic of a passive continental margin appears clearly only in the early Jurassic. At the foot of the Mazagan escarpment, the sedimentary record shows a foundering of the first bloc during early to middle Lias. A thermal uplift phase is indicated by emersion of the African margin shoulder in late Liassic, and thermal relaxation starts in the middle Jurassic. The morphology of this transect, compared with the conjugate side of the American continent is most easily explained by the uniform sense simple shear model.