ROOT-GROWTH AND MINERAL-NUTRITION OF CORN HYBRIDS AS AFFECTED BY PHOSPHORUS AND LIME

The effects of triple superphosphate (TS) and liming on macronutrient accumulation and root growth of Pioneer 3072 and Cargill 505 com hybrids were studied. Com plants were grown up to 30 days in pots with 7 L of a dark red Latosol sandy loam (Haplortox). Lime was applied to raise base saturation to 30, 50, and 70%, in two levels of phosphorus (P) fertilization with TS (0 and 200 ppm P). There was an increase in root surface due to lime only in pots without TS, with no effects on plant growth or nutrition. Both com hybrids responded to P fertilization, but Pioneer yielded more dry matter than Cargill. The roots of Cargill were thicker and, when in TS presence, were longer and had a larger surface than Pioneer. There was an increase in macronutrient uptake in the P fertilized pots. Pioneer required more nutrients and showed a higher efficiency in acquiring and utilizing the nutrients from the soil. A higher response of Pioneer in dry matter and nutrient acquisition was more related to the physiological efficiency than to root morphology.

Nutritive Value of the Crop Residues from bt-Corn Hybrids and Their Effects on Performance of Grazing Beef Cows

One non bt-corn hybrid (Pioneer 3489) and three btcorn hyrids (Pioneer 34RO7, Novartis NX6236, and Novartis N64-Z4) were planted in replicated 7.1-acre fields. After grain harvest, fields were stocked with 3 mature cows in midgestation to be strip-grazed as four paddocks over 126 days. Six similar cows were allotted to replicated drylots. All cows were fed hay as necessary to maintain a condition score of 5 on a 9-point scale. Cows were condition-scored biweekly and weighed monthly. Forage yield and weathering losses were determined by sampling one 4-m2 location per grazed or ungrazed paddock in each field with a minimum total of 2 locations of grazed or ungrazed forage per field. To measure forage selection during grazing, samples of grazed forage were collected from the rumen of one fistulated steer that grazed for 2 hours after ruminal evacuation. Non-bt-corn hybrids had greater (P<.05) infestation of corn borers in the upper stalk, lower stalk and ear shank than bt-corn hybrids. However, there were no differences in grain yields or dropped grain between hybrids. Crop residue dry matter, organic matter and in vitro digestible dry matter yields at the initiation of grazing did not differ between corn hybrids. Dry matter, organic matter and in vitro digestible dry matter losses tended (P<.10) to be greater from the NX6236 and N64-Z4 hybrids than from the 3489 and 34RO7 hybrids and were greater (P<.05) from grazed than non-grazed areas of the fields. At the initiation of grazing, dry matter concentrations of the crop residues from the NX6236 and N64-Z4 hybrids tended to be lower than those from the 3489 and 34RO7 hybrids. Crop residues from the NX6236 and N64-74 hybrids had lower concentrations of acid detergent fiber (P<.05) and acid detergent lignin (P=.07) and higher concentrations of in vitro digestible organic matter than the 3489 and 34RO7 hybrids. Over the grazing season, corn hybrid did not affect mean rates of change in forage composition. The concentration of in vitro digestible organic matter in forage selected by steers after two weeks of grazing did not differ. However, steers grazing corn crop residues consumed forage with higher (P<.05) concentrations of neutral detergent fiber, acid detergent fiber, and acid detergent insoluble nitrogen than steers fed hay. The acid detergent fiber concentration of forage selected by steers grazing the 3489 and N64-Z4 hybrids was lower (P < .05) than concentrations from the 34RO7 and NX6236 hybrids. In order to maintain similar body condition score changes, cows grazing crop residues from the 3489, 34RO7, NX6236, and N64-Z4 hybrids required 650, 628, 625, and 541 kg hay DM/cow compared with a hay requirement of 1447 kg hay DM/cow for cows maintained in a drylot.

Experimental corn hybrids tested in 1956 /

Cover title.

Pre-emptive breeding to combine superior eating quality in tropical super sweet corn with resistance to major diseases

This report presents the process and outcomes of a five year project, which employed genetics and breeding approach for integrating disease resistance,agronomy and quality traits that enhances sustainable productivity improvement in sweet corn production. The report outlines a molecular markers based approach to introgress quantitative traits loci that are believed to contribute to resistance to downy mildew, a potentially devastating disease that threatens sweet corn and other similar crops. It also details the approach followed to integrate resistances for other major diseases such as southern rust (caused by Puccinia polysora Underw), Northern Corn Leaf Blight (Exserohilum turcicum) with improved agronomy and eating quality. The report explains the importance of heterosis (hybrid vigour) and combining ability in the development of useful sweet corn hybrids. It also explains the relevance of parental performance to predict its breeding value and the performance of its hybrids.

Corn seed treatment with naphthalic anhydride against isoxaflutole phytotoxication action

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of intercropping on yields of corn with different relative maturities and Palisadegrass

Intercropping corn (Zea mays L.) with palisadegrass [Brachiaria brizantha (Hochst. ex A. Rich) Stapf] can result in high amounts of residue and improve nutrient cycling. Long-season corn hybrids will live longer, competing with palisadegrass, which may reduce both corn and forage biomass yields. This study, conducted in the state of São Paulo, Brazil, had the objective of evaluating nutrient concentration and yield of corn hybrids with different maturity ratings as affected by intercropped palisadegrass as well as forage dry matter production. Te experimental design was randomized blocks with a factorial arrangement of eight treatments consisting of two cropping systems (corn alone and intercropped with palisadegrass) and four corn hybrids (105-, 121-, 132, and 144-d relative maturity). Compared with corn grown alone, intercropping treatments resulted in corn grain yields of 107% (105-d hybrid) to 71.7% (144-d hybrid). In the corn-alone system, the 132- and 144-d corn hybrids provided the highest corn yields (9581 and 9606 kg ha-1, respectively). Corn yield was similar between the single-crop and intercrop systems when using 105-, 121-, and 132-d hybrids. Intercropping with the 144-d hybrid reduced forage production (6619 kg ha-1) and quality of palisadegrass (86 g kg-1 of crude protein) compared with the other hybrids. Te intercropping system with the 132-d hybrid allowed both the highest corn grain (8860 kg ha-1) and palisadegrass (8256 kg ha-1) yields. Therefore, intercropping palisadegrass with the earlier (105-, 121-, and 132-d) corn hybrids is a viable option for crop-livestock integration because it did not affect either corn or palisadegrass yield. © 2013 by the American Society of Agronomy, 5585 Guilford Road, Madison, WI 53711. All rights reserved.

Agronomic and chemical characteristics of hybrid corn to ensiling

Our aim was to evaluate agronomic and chemical characteristics of corn hybrids to ensiling. It were evaluated nine corn hybrids (MX 300, RB 9308, 2B655, XB 6012, GNZ 2500, PL6890, PRE 32D10, PRE 22T10 e AG 1051), with three replicates. The higher fresh matter yield were observed in the hybrids PL6890 and PRE 32D10, while the dry matter yield was observed in the hybrid PRE 32D10 (13.43 t ha(-1)). The hybrids PRE 32D10 and PRE 22T10 stood out to present higher percent of leaf in relation to whole plant, while the lower percent of stems was found in the hybrids MX 300, 2B655 and XB 6012, however the higher leaves: stems relation was found in XB 6012 (0.49). There was higher CP content in the hybrid PRE 32D10 (9.10% of DM), while the lower NDF (57.78% of DM) and cellulose content (24.27% of DM) were observed in the hybrid GNZ 2500. The hybrid PL6890 presented higher ADF and lignin contents, the others hybrids had values lower. The lower NDIN content was observed in the hybrid RB 9308, while the lower AIDN content occurred on the hybrid 2B655. The lower buffer capacity was observed in the hybrid 2B655 (0.29). There are some differences on chemical composition among the corn hybrids used in this study, however, it is recommended to use the hybrids MX 300, PL6890 and PRE 32D10 for showing higher dry matter yield, which may reflect in the amortization of silage production costs.

Yield Response of Planting Corn in Early April

Corn is planted earlier each year, which is one important component in maximizing grain yield. Earlier planting dates can be attributed to larger farms, less spring tillage, improvements in corn hybrids, improved drainage systems, and better seed treatments. Research conducted at the ISU Northwest Research Farm from 2006 through 2009 showed that the planting window for 98 percent or greater yield potential in northwest Iowa is April 15 to May 9. A 95 percent or greater yield potential can be realized from April 15 to May 18. A study was conducted from 2009 through 2011 at the Northwest Research Farm to determine how corn planted in early April compares with corn planted in the recommended planting window for the area.

Drought Tolerant Corn Strip Trial

The strip trial was designed to evaluate new drought tolerant corn hybrids for yield. Three of these drought tolerant hybrids were planted with other hybrids for comparison.

Biological characteristics of black armyworm Spodoptera cosmioides on genetically modified soybean and corn crops that express insecticide Cry proteins.

This study aimed to evaluate the development and reproduction of the black armyworm, Spodoptera cosmioides when larvae fed on leaves of Bt-corn hybrids, expressing a single Cry1F and also Cry1F, Cry1A.105 and Cry2Ab2 in pyramided corn and their non-Bt-isoline (hybrid 2B688), as well as on leaves of two soybean isolines expressing the Cry1Ac protein and its non-Bt isoline (A5547-227). We also assessed the effect of these Bt and non-Bt plants on the leaf consumption rate of S. cosmioides larvae. This pest was unable to develop when fed on any of the corn isolines (Bt and non-Bt). When both 1st and 3rd instar larvae were fed on corn leaf, mortality was 100% in both Bt and non-Bt corn. In contrast, when corn leaves were offered to 5th instar larvae, there were survivors. Defoliation and leaf consumption was higher with non-Bt corn than with both of the Bt corn isolines. There was no negative effect of Bt soybean leaves on the development and reproduction of S. cosmioides with respect to all evaluated parameters. Our study indicates that both Bt and non-Bt corn adversely affect the development of S. cosmioides while Bt soybean did not affect its biology, suggesting that this lepidopteran has major potential to become an important pest in Bt soybean crops.

Effect of post-emergent herbicides application on carotenoid concentration in green corn.

Considering the influence of herbicides in the metabolism of the carotenoids in corn, the objective of the present study was to evaluate the effect of herbicides and genotype on carotenoids concentration. The green corn hybrids BRS 1030 and P30F53 were subjected to a post-emergent herbicides application at 20 and 30 days after emergence. Carotenoids were extracted from corn grains and analyzed to quantify ?- and ?-carotene, lutein, zeaxanthin, ?-cryptoxanthin, total carotenoids (TC), and total of vitamin A carotenoids precursors (proVA). The application of foramsulfuron + iodosulfuron-methyl-sodium (40 + 2.6 g ha-1), nicosulfuron (20 g ha-1), mesotrione (120 g ha-1) and tembotrione (80 g ha-1 and 100 g ha-1) promoted higher concentration of carotenoids in fresh green corn. Lutein, zeaxanthin, ?-cryptoxanthin, ?-carotene, ?-carotene, proVA carotenoids, and TC concentration increased after foramsulfuron + iodosulfuron-methyl-sodium in late application (V5 to V6), nicosulfuron in both applications, mesotrione applied post-initial (V3 to V4), tembotrione (100 g ha-1) in both applications and tembotrione (80 g ha-1) in late post-application, at least for one hybrid. The content of carotenoids in the green corn kernels differed between ?BRS 1030? and ?P30F53?. Our results suggest a possibility of significant increase of carotenoids in green corn kernels through the handling of corn production with post-emergent herbicides.

Alterações morfo-anatômicas das folhas de milho submetidas à aplicação de nicosulfuron

O objetivo desse trabalho é descrever os enrolamento das extremidades do limbo foliar, sinais externos de intoxicação e as alterações aos 7 dias após a aplicação do produto. As histológicas nas folhas de híbridos de milho alterações anatômicas observadas restringiramsubmetidos à aplicação de nicosulfuron. se às células componentes do sistema Verificou-se que os híbridos tratados dérmico. apresentaram descoloração da parte basal das lâminas das folhas centrais, enrugamento e enrolamento das extremidades do limbo foliar, aos 7 dias após a aplicação do produto. As alterações anatômicas observadas restringiramse às células componentes do sistema dérmico.

Respostas de híbridos de milho ao nicosulfuron: I - aspectos biológlcos e da produção

Um ensaio de campo foi conduzido em 1994/95, na Fazenda de Ensino e Pesquisa da Faculdade de Ciências Agrárias e Veterinárias (UNESP) de Jaboticabal, SP, sendo os objetivos do trabalho comparar aspectos biológicos e produtivos de nove diferentes híbridos de milho, resultantes da aplicação da dose de 80 g.ha-1 de nicosulfuron {2- [[[[4,6-dimetoxi-2-pirimidina) amina] carboxil] amina] sulfonil] -N,N-dimetil-3-piridinacarboxiamida} em relação a plantas não tratadas. Verificou-se que o herbicida afetou significativamente alguns dos aspectos biológicos estudados (altura de plantas e de espigas, número de folhas, comprimento e largura de folhas e estande final) e não afetou os relacionados com a posição relativa das espigas, o diâmetro do colmo, as porcentagens de acamamento e de quebramento. A produtividade estimada dos híbridos tratados não foi afetada pela aplicação do produto, com exceção da estimada para o híbrido HT 2X.

Compactação do solo e produção de cultivares de milho em latossolo vermelho: I - características de planta, solo e índice S

Este trabalho teve como objetivo avaliar, em condições de campo, a resposta de duas cultivares de milho com características genéticas distintas em Latossolo Vermelho em seis níveis de compactação. O experimento foi conduzido em faixas, no delineamento de blocos completos casualizados, com quatro repetições. Utilizaram-se os híbridos de milho DKB 390 e DAS 2B710. Após a semeadura do milho, coletaram-se amostras indeformadas de solo nas profundidades de 0-10, 10-20 e 20-30 cm, para determinação de propriedades físicas do solo e índice S. No estádio de maturidade fisiológica dos grãos do milho, foram determinados: a altura das plantas, a altura de inserção da primeira espiga, o diâmetro do segundo colmo acima do solo e a massa de matéria seca das plantas. As espigas foram colhidas e debulhadas para determinação da produtividade de grãos, corrigida para a umidade-padrão de 13 %, calculando-se também o número de espigas por planta e o índice de colheita. O índice S apresentou correlação positiva com a produtividade, porém, abaixo do limite de S < 0,035, estabelecido para uma condição de solo desestruturado, ocorreram perdas acentuadas na produtividade de milho. Os híbridos simples de milho DKB 390 e DAS 2B710 não apresentaram diferenças quando submetidos aos diferentes níveis de compactação. A produtividade dos híbridos de milho foi significativamente menor quando a resistência do solo à penetração atingiu 2,15 MPa.

Compactação do solo e produção de cultivares de milho em latossolo vermelho: II - intervalo hídrico ótimo e sistema radicular

Este trabalho teve como objetivo avaliar, no campo, a resposta de duas cultivares de milho em um Latossolo Vermelho, em seis níveis de compactação, quanto ao desenvolvimento do sistema radicular, bem como caracterizar a compactação do solo a partir do intervalo hídrico ótimo (IHO). O experimento foi realizado em faixas, no delineamento de blocos completos casualizados, com quatro repetições. Utilizaram-se os híbridos de milho DKB 390 e DAS 2B710. Após a semeadura do milho, coletaram-se amostras indeformadas de solo para a determinação de propriedades físicas do solo e do IHO. No estádio do pendoamento do milho, retiraram-se três amostras por parcela na entrelinha, nas profundidades de 0-10, 10-20 e 20-30 cm, em cada parcela, para determinação de diâmetro médio, densidade do comprimento radicular e massa de matéria seca das raízes. O IHO foi igual a zero quando o solo atingiu a densidade crítica de 1,46 kg dm-3, correspondente a 92 % da densidade máxima do solo. Com a compactação, houve aumento da produção de matéria seca das raízes, da densidade do comprimento radicular e do diâmetro radicular e na profundidade de 0-10 cm, o aumento da massa de matéria seca e da densidade radicular se dá até a resistência do solo à penetração de 1,23 e 1,43 MPa, respectivamente. Houve correlação negativa entre a massa de matéria seca, a densidade e o diâmetro radicular com a produtividade do milho irrigado, mostrando que essas variáveis são bons indicadores da compactação do solo.