10 resultados para Copernicia prunifera


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Copernicia prunifera, known as carnauba, is native to Brazil and presents great potential to be used in gardens and cultivation in pot. Palms species, with relatively few exceptions, can only be propagated by seeds; even so, there are no reports in the literature about the germination of this palm seeds. Several species of the Arecaceae family present seed physical dormancy in varying degrees, demanding treatments to improve germination. The objective of this work was to study the effects of temperature and mechanical scarification on seed germination of C. prunifera. The experimental design was entirely randomized in a factorial arrangement 6 x 2 (six conditions of temperature with or without mechanical scarification) with 4 replications and 25 seeds each. In accordance with the treatment, lateral scarifications were made on the seeds until appearance of the endosperm. Seeds were sown in moist fine vermiculite. Germination (%) and germination rate (GR) were evaluated. Germination data were arcsine (x/100)1/2 transformed before analysis of variance and germination rate data were not transformed. The means of the resulting values were then compared by the Scott-Knott test at 1% confidence level. It was concluded that the biggest germination percentage were obtained at alternated temperature of 25-35°C (92%) and at constant temperature of 25°C (87%). Seeds germinated faster at alternated temperature of 25- 35°C. Germination percentage was similar for the scarified and non-scarified seeds; however, scarified seeds germinated faster.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The present study aimed to develop microsatellite markers (SSR) for Copernicia prunifera; and characterize the demographic pattern and the spatial genetic structure (SGS) in different development stages of C. prunifera in a natural population of Rio Grande do Norte (RN) by using ISSR molecular markers. 17 SSR primers pairs were developed, which were tested by using DNA from samples of different populations. The demographic and genetic spatial structure was assessed in a plot with an area of 0.55 ha, where all individuals were georeferenced. The molecular analyses with the use of microsatellite markers pointed out that all built primers pairs, when submitted to PCR, had amplification. They showed sizes of base pairs ranging between 113 and 250 bp. The demographic analyses showed a clustered standard of spatial distribution in the first distance classes, random between 40 and 50 m and segregated in higher distances. Eight ISSR primers were used, thereby producing a total of 102 loci, with 100 of them being polymorphic. Among the three stages, the young showed the highest Nei’s genetic diversity index (He = 0.37); whilst the lowest index was found in the reproductive adults (He = 0.34). The AMOVA results showed a greater genetic differentiation within the development stages (98.61%) in comparison to the interval among the stages (1.39%). The total population (n = 161) showed a positive and significant relationship of kinship in the first distance class (12.3 m). The young showed a significant kinship up to 10.5 m and negative in the fifth distance class (37.6 m). The non-reproductive adults had a positive relationship of kinship in the first distance class (11.0 m) and random distribution of genotypes in the remaining classes. The reproductive adults showed genotypes spatially distributed in a random way. The values for the genetic bottleneck tests proved that the number of loci with excess observed heterozygosity was greater than expected. The SGS results reflect the restricted dispersion of the species, and the bottleneck tests reflect the reduction genotypes provoked by the anthropization of natural environments of C. prunifera.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

In this work, the plant species Copernicia prunifera (Miller) H. E. Moore (carnauba), naturally occurring which prevails in the northeast region of Brazil was the subject of studies aiming its use as external coating of pipelines used in petroleum industry. The part of the plant worked were the leaves, also called straw, which were coated with resinous material. For this purpose, it was necessary to evaluate the effectiveness of the use of acrylic resins in the straw carnauba coating. The properties of the untreated carnauba straw and chemically treated with sodium hydroxide, hexane and carbon tetrachloride were investigated by ATRFTIR, SEM and thermal analysis. The first two techniques showed that treatment with solvents has caused major changes in the straw surface, while the thermal analysis indicated that the sodium hydroxide caused variations in thermal stability of straw constituents. Water absorption measurements showed that treatments have accelerated the absorption process and the reduction of contact angle values for treated samples with solvents indicated higher hidrophilicity of straw. The tensile tests showed lower values of elastic modulus and tensile strength for treated samples. Furthermore, coatings using pure commercial resins A and B as well as the formulations with clay were applied in straw and they were examined once again through thermal analysis, water absorption measurements, contact angle and mechanical tests. To analyze the effect of heat ageing, samples were subjected to tensile tests again in order to assess its resistance. The results showed that the resins/clay formulations increased thermal stability of straw, they promoted a good impermeabilization and caused significant decrease in the values of elastic modulus and tensile strength. Evaluating the ageing effect on the mechanical properties, it has been showed good recovery to the coated straw with the formulations A 60 and A 80% in modulus and tensile strength values and elongation at break values have remained very close. It is thus concluded that the carnauba straw can be used as a coating of pipelines with significant cost savings, since there is no need for pretreatment for its use and shows itself as a viable biotechnology alternative, contributing to the quality of coatings material and environment preservation.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The Arecaceae family comprises plants with economical importance in many Brazilian regions, for agricultural exploration or for landscaping. In great portion, species of this family present low germination velocity and percentage. This work meant to evaluate the germination and early development of seven palm species (Archontophoenix alexandrae H. Wendl. et Drude, Copernicia prunifera (Miller) H.E. Moore, Latania commersonii Gmel., Livistona chinensis R. Br., Syagrus campos-portoana Bondar, Syagrus coronata (Mart.) Beccari, Syagrus picrophylla Barb. Rod.), submitted to three kinds of seed bed plot coverings. Three 10 x 2 m seedbeds were built and filled with a mixture of sand, soil and chicken manure (1:3:0.5 proportion), where two lines were sown with each specie. On top of each seedbed, plastic covering and fifty percent screen were set allowing one third of the seedbed to full sunlight exposure. Seedbeds were irrigated by dripping system. All species had the same germination rate, regardless of the covering, by the end of the experiment (146 days after sowing), eventhough, A. alexandrae under plastic covering conditions, L. commersonii at full sunlight exposure and Syagrus campos-portoana under fifty percent shade, had reached that percentage around 51 days after sowing. The remaining species reached the greatest germination percentage earlier with some of the coverings, rather than at full sunlight exposure. For the studied conditions, covering type had no effect in leaf length and width. For leaf number, there was interaction between species x covering type for Livistona chinensis and Copernicia prunifera.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

In the laboratory of cytogenetics of the DBAA-UNESP we are studying the karyotipe of some Brazilian Palms. To determine the best protocol, methods of seed germination, inhibition of mitosis, time to pick up the roots and staining were analyzed. The results shown that the seed germination in sphagnum is effective to achieve good roots. The best time to collect the root tips is between 11 to 12 AM., when there are more cell metaphases. The inhibition of mitosis cycle at metaphases may be effective both with 8-hydroxiquinoleine (0,03% -5 hours) or with cold water (0°C - 18-20 hours). The staining with Giemsa 2% showed the best chromosome figures in the metaphases. Now, to get good metaphases slides the method in use in the lab is: 1) seed germination in sphagnum at room temperature and high humidity; 2) The major roots are cut maintaining at least 5 cm, because this technic allows new emergence of roots, increasing the number of roots collected per germinated seed, that is very important in some species with poor germination rates; 3) To get the mitosis inhibition we are using cold water (0°C) treatment for 18-20 hours, following the standard protocols for conservation and hydrolysis; or enzyme digestion with pectinasecellulase 4) the staining procedures are made using Giemsa 2%. The Brazilian palms species studied and their respective chromosome number were: Aiphanes acanthophylla (2n=30), A. caryotaefolia (2n=30), Syagrus quinquifaria (2n=32), S. coronata (2n=32), S. romanzoffiana (2n=32), Euterpe edulis (2n=36), E. oleracea (2n=36), Copernicia prunifera (2n=36), Scheelea lauromuelleriana (2n=32) and Bactris gasipaes (2n=30).

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The “dicótilo-palmácea” mixed forest is found in the fluvial plains (floodplains) of watercourses on the Ceará semiarid region (Brazil), distinguishing from the surrounding vegetation (caatinga) by the prevalence of larger tree species. In the river’s margins, presenting high variability in the extension of the riverbanks, arise floodplains in pedologic complexes mainly composed by neossols and argissols, resulting from the deposition of sediments. In these areas of high fertility soils and subjected to flooding during part of the year, it develops a particular type of riparian vegetation dominated by carnauba palm tree (Copernicia prunifera (Mill.) H.E. Moore) forming a particular type of riparian forest, designated by carnaubal palm forest. We aimed to carry out floristic and phytosociological surveys of carnauba palm forests located in the northern region of Ceará. The classical sigmatist method of Braun-Blanquet was applied and classification analysis (Twinspan) was perfomed. The field work occurred in March 2014 and 2016 in eight areas: Fazenda Pedra Branca (03º 37’ 10’’ S e 40º 18’ 30’’ W, 104 m asl), Vale do Rio Bom Jesus (04º 04’ 42’’ S e 39º 57’ 08’’ W, 200 m asl), Lagoa do Peixe (03º 56’ 28’’ S e 40º 23’ 23’’ W, 97 m asl), Fazenda Peixes (04º 06’ 03’’ S e 40º 32’ 43’’ W, 114 m asl), Fazenda Natividade (04º 02’ 50’’ S e 40º 29’ 03’’ W, 109 m asl), Fazenda Morro Alto (02º 53’ 42’’ S e 39º 54’ 51’’ W, 16 m asl), Fazenda Araticum (03º 04’ 58’’ S e 40º 09’ 36’’ W, 19 m asl) and Fazenda Experimental da UVA (03º 37' 04'' S 40º 18' 18'' W, 200 m asl).The floristic list consists of 170 species, distributed between 127 genera and 50 families. Twenty-seven Brazilian endemic species were identified, from which 8 are exclusive of the Caatinga biome. The Fabaceae was the most representative family, with the highest number of species (28), followed by Poaceae (17), Malvaceaea (14), Euphorbiaceae (12), Asteraceaea (9), Convolvulaceae and Rubiaceae (9). The dominant life forms were therophytes (34%), phanerophytes (30%) and chamaephytes (18%). Two communities were identified as a result of the classification analysis using the Twinspan.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The use of raw materials from renewable sources for production of materials has been the subject of several studies and researches, because of its potential to substitute petrochemical-based materials. The addition of natural fibers to polymers represents an alternative in the partial or total replacement of glass fibers in composites. In this work, carnauba leaf fibers were used in the production of biodegradable composites with polyhydroxybutyrate (PHB) matrix. To improve the interfacial properties fiber / matrix were studied four chemical treatments to the fibers..The effect of the different chemical treatments on the morphological, physical, chemical and mechanical properties of the fibers and composites were investigated by scanning electron microscopy (SEM), infrared spectroscopy, X-ray diffraction, tensile and flexural tests, dynamic mechanical analysis (DMA), thermogravimetry (TGA) and diferential scanning calorimetry (DSC). The results of tensile tests indicated an increase in tensile strength of the composites after the chemical treatment of the fibers, with best results for the hydrogen peroxide treated fibers, even though the tensile strength of fibers was slightly reduced. This suggests a better interaction fiber/matrix which was also observed by SEM fractographs. The glass transition temperature (Tg) was reduced for all composites compared to the pure polymer which can be attributed to the absorption of solvents, moisture and other low molecular weight molecules by the fibers

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The Humid Chaco of Northeast Paraguay harbors monoculture palm savannas in which Copernicia alba is the only dominant overstory species. The study’s objective was to provide the complete spatial distribution of a simple ecosystem lacking confounding factors of overstory competition and changes in slope. Palms within six, 50 x 50m plots were marked by their GPS location and measured for dbh and total stem height. The spatial distribution was individually analyzed for each plot at the local scale up to 12 m using Ripley’s K test. For the total population including juvenile and adult plants, the sample plots contained both random and clustered distribution patterns. In each of the six plots, the juvenile populations exhibited more clustered patterns than the adult population of each plot.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The use of raw materials from renewable sources for production of materials has been the subject of several studies and researches, because of its potential to substitute petrochemical-based materials. The addition of natural fibers to polymers represents an alternative in the partial or total replacement of glass fibers in composites. In this work, carnauba leaf fibers were used in the production of biodegradable composites with polyhydroxybutyrate (PHB) matrix. To improve the interfacial properties fiber / matrix were studied four chemical treatments to the fibers..The effect of the different chemical treatments on the morphological, physical, chemical and mechanical properties of the fibers and composites were investigated by scanning electron microscopy (SEM), infrared spectroscopy, X-ray diffraction, tensile and flexural tests, dynamic mechanical analysis (DMA), thermogravimetry (TGA) and diferential scanning calorimetry (DSC). The results of tensile tests indicated an increase in tensile strength of the composites after the chemical treatment of the fibers, with best results for the hydrogen peroxide treated fibers, even though the tensile strength of fibers was slightly reduced. This suggests a better interaction fiber/matrix which was also observed by SEM fractographs. The glass transition temperature (Tg) was reduced for all composites compared to the pure polymer which can be attributed to the absorption of solvents, moisture and other low molecular weight molecules by the fibers