992 resultados para Controle de mobilidade


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The spread of wireless networks and growing proliferation of mobile devices require the development of mobility control mechanisms to support the different demands of traffic in different network conditions. A major obstacle to developing this kind of technology is the complexity involved in handling all the information about the large number of Moving Objects (MO), as well as the entire signaling overhead required to manage these procedures in the network. Despite several initiatives have been proposed by the scientific community to address this issue they have not proved to be effective since they depend on the particular request of the MO that is responsible for triggering the mobility process. Moreover, they are often only guided by wireless medium statistics, such as Received Signal Strength Indicator (RSSI) of the candidate Point of Attachment (PoA). Thus, this work seeks to develop, evaluate and validate a sophisticated communication infrastructure for Wireless Networking for Moving Objects (WiNeMO) systems by making use of the flexibility provided by the Software-Defined Networking (SDN) paradigm, where network functions are easily and efficiently deployed by integrating OpenFlow and IEEE 802.21 standards. For purposes of benchmarking, the analysis was conducted in the control and data planes aspects, which demonstrate that the proposal significantly outperforms typical IPbased SDN and QoS-enabled capabilities, by allowing the network to handle the multimedia traffic with optimal Quality of Service (QoS) transport and acceptable Quality of Experience (QoE) over time.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Elétrica, 2016.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Pós-graduação em Medicina Veterinária - FCAV

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Developing an efficient methodology for oil recovery is extremely important . Within the range of enh anced oil recovery, known as EOR, the injection of polymer solutions becomes effective in controlling the mobility of displacing fluid . This method consists of adding polymers to the injection water to increase its viscosity, so that more water diffuses in to the porous medium and increasing the sweep efficiency in the reservoir. This work is studied by numerical simulation , application of the injection polymer solution in a homogeneous reservoir , semisynthetic with similar characteristics to the reservoirs of the Brazilian Northeast , numerical simulations were performed using thermal simulator STARS from CMG (Computer Modelling Group ). The study aimed to analyze the influence of some parameters on the behavior of reservoir oil production, with the response to cumulative production. Simulations were performed to analyze the influence of water injection, polymer solution and alternating injection of water banks and polymer solution, comparing the results for each simulated condition. The primary outcomes were: oil viscosity, percentage of injected polymer, polymer viscosity and flow rate of water injection. The evaluation of the influence of variables consisted of a complete experimental design followed a Pareto analysis for the purpose of pointing out which va riables would be most influential on the response represented b y the cumulative oil production . It was found that all variables significantly influenced the recovery of oil and the injection of polymer solution on an ongoing basis is more efficient for the cumulative production compared to oil recovery by continuous water injection. The primary recovery show ed low levels of oil production , water injection significantly improves the pro duction of oil in the reservoir , but the injection of polymer solution em erges as a new methodology to increase the production of oil, increasing the life of the well and possible reduction of water produced.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

O controle da vaquinha é difícil por ser um inseto que se alimenta de muitas plantas e apresenta grande mobilidade. No entanto, a aplicação de produtos a base de Tricloform ou Carbaril, principalmente nos foliolos jovens, diminui os prejuízos causados pelo ataque da praga.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

New versions of SCTP protocol allow the implementation of handover procedures in the transport layer, as well as the supply of a partially reliable communication service. A communication architecture is proposed herein, integrating SCTP with the session initiation protocol, SIP, besides additional protocols. This architecture is intended to handle voice applications over IP networks with mobility requirements. User localization procedures are specified in the application layer as well, using SIP, as an alternative mean to the mechanisms used by traditional protocols, that support mobility in the network layer. The SDL formal specification language is used to specify the operation of a control module, which coordinates the operation of the system component protocols. This formal specification is intended to prevent ambiguities and inconsistencies in the definition of this module, assisting in the correct implementation of the elements of this architecture

Relevância:

30.00% 30.00%

Publicador:

Resumo:

A proposta deste estudo foi analisar o efeito de um programa de treinamento de membros superiores baseado nas técnicas de facilitação neuromuscular proprioceptiva (FNP) sobre a mobilidade torácica. Foram estudadas 24 voluntárias sedentárias, idade 22,9 ± 2,9 anos, divididas em grupo controle (GC), que não participou do treinamento, e grupo treinado (GT). O protocolo de treinamento físico foi constituído por um programa de exercícios de FNP, realizado três vezes por semana, durante quatro semanas. Os dois grupos foram submetidos à avaliação da mobilidade torácica por meio de cirtometria, antes e após o período de treinamento. Os dados colhidos foram analisados estatisticamente, com nível de significância α = 5%. Os valores da cirtometria axilar e xifoideana do GC antes e após o período de intervenção não apresentaram alterações significativas (p>0,05). No GT os valores das variáveis foram significantemente maiores após a intervenção (p<0,05). em conclusão, o protocolo de FNP utilizado parece ser um programa de exercícios eficiente, por promover aumento na cirtometria em um curto período de tempo, sugerindo que pode ser utilizado como recurso fisioterapêutico para o desenvolvimento da mobilidade torácica.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pós-graduação em Educação - FFC

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Introduction: Some losses resulting from aging can be minimized with the practice of resistive exercises. Objective: To analyze the effects of resistive exercises on flexibility, mobility, muscle strength and balance in the elderly. Method: Twenty elderly individuals were divided between an activity group (AG, n=10; 66.1±6.35 years) and a control group (CG, n=10; 65.4±7.54 years). Mobility, flexibility, muscle strength and balance were evaluated. The AG participated in the training for 13 weeks (one-hour sessions, twice a week). The Wilcoxon non-parametric test (intra-group analysis) was used to analyze the data. A significance level of 5% (p<0.05) was adopted. Results: After training, the AG presented better mobility, lower limb muscle strength, and balance, but no difference in flexibility. Conclusion: The present study allows us to conclude that resistive exercises were able to improve mobility, lower limb muscle strength and balance in elderly individuals.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The human hand is the focus of inumerous research studies. Human individuals are capable of performing manual tasks beyond the ability of any other animal. Such large motor ability is due in part to contact surface of the pulp thumb in opposition to the other fingers. Evidences in the literature show that the position of the upper limb influences the ability of hand strength and control. Specifically, the position of the wrist has great influence on the production of pinch strength. The main objective of this study was to investigate the influence of wrist position on the pinch grip with the thumb in opposition to the index finger. Participants of the present study were 21 undergraduate students, 10 men and 11 women. Participants performed a pinch grip task in three wrist positions - maximum flexion, maximum extension and neutral - on two force conditions - 20% and 40% of maximum voluntary contraction (MVC). MVC was measured in two attempts in each of the three positions of the wrist for a period of three seconds, and the trial of the best result was used as the parameter for task performance. In each trial participants maintained the force production at position for 10 seconds. All participants performed each test condition four times, and the first was used as a familiarization trial and discarded from further analysis. In all trials visual feedback online was provided. Results of both group gender showed variability was similar for force production. Men were stronger than women, but this difference was not significant and both produced on the average more strength in the neutral wrist position than in flexion or extension. In the extended position participants were significantly less variable than in the flexion and neutral positions. We obtained a significant positive correlation between weight and pinch force...(Complete abstracts click electronic access below)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Elétrica - FEB