Some past decision theory models for euro construction model codes and for road drainage in Spain, and modest hints with multi-criteria methods for agro and environmental assurance

The authors are from UPM and are relatively grouped, and all have intervened in different academic or real cases on the subject, at different times as being of different age. With precedent from E. Torroja and A. Páez in Madrid Spain Safety Probabilistic models for concrete about 1957, now in ICOSSAR conferences, author J.M. Antón involved since autumn 1967 for euro-steel construction in CECM produced a math model for independent load superposition reductions, and using it a load coefficient pattern for codes in Rome Feb. 1969, practically adopted for European constructions, giving in JCSS Lisbon Feb. 1974 suggestion of union for concrete-steel-al.. That model uses model for loads like Gumbel type I, for 50 years for one type of load, reduced to 1 year to be added to other independent loads, the sum set in Gumbel theories to 50 years return period, there are parallel models. A complete reliability system was produced, including non linear effects as from buckling, phenomena considered somehow in actual Construction Eurocodes produced from Model Codes. The system was considered by author in CEB in presence of Hydraulic effects from rivers, floods, sea, in reference with actual practice. When redacting a Road Drainage Norm in MOPU Spain an optimization model was realized by authors giving a way to determine the figure of Return Period, 10 to 50 years, for the cases of hydraulic flows to be considered in road drainage. Satisfactory examples were a stream in SE of Spain with Gumbel Type I model and a paper of Ven Te Chow with Mississippi in Keokuk using Gumbel type II, and the model can be modernized with more varied extreme laws. In fact in the MOPU drainage norm the redacting commission acted also as expert to set a table of return periods for elements of road drainage, in fact as a multi-criteria complex decision system. These precedent ideas were used e.g. in wide Codes, indicated in symposia or meetings, but not published in journals in English, and a condensate of contributions of authors is presented. The authors are somehow involved in optimization for hydraulic and agro planning, and give modest hints of intended applications in presence of agro and environment planning as a selection of the criteria and utility functions involved in bayesian, multi-criteria or mixed decision systems. Modest consideration is made of changing in climate, and on the production and commercial systems, and on others as social and financial.

A hybrid agent architecture for modeling autonomous agents in SAGE

This paper highlights the Hybrid agent construction model being developed that allows the description and development of autonomous agents in SAGE (Scalable, fault Tolerant Agent Grooming Environment) - a second generation FIPA-Compliant Multi-Agent system. We aim to provide the programmer with a generic and well defined agent architecture enabling the development of sophisticated agents on SAGE, possessing the desired properties of autonomous agents - reactivity, pro-activity, social ability and knowledge based reasoning. © Springer-Verlag Berlin Heidelberg 2005.

A Scheme Design of Cloud + End Technology in Demand Side Management

Demand Side Management (DSM) plays an important role in Smart Grid. It has large scale access points, massive users, heterogeneous infrastructure and dispersive participants. Moreover, cloud computing which is a service model is characterized by resource on-demand, high reliability and large scale integration and so on and the game theory is a useful tool to the dynamic economic phenomena. In this study, a scheme design of cloud + end technology is proposed to solve technical and economic problems of the DSM. The architecture of cloud + end is designed to solve technical problems in the DSM. In particular, a construct model of cloud + end is presented to solve economic problems in the DSM based on game theories. The proposed method is tested on a DSM cloud + end public service system construction in a city of southern China. The results demonstrate the feasibility of these integrated solutions which can provide a reference for the popularization and application of the DSM in china.

From SMART to agent systems development

n order for agent-oriented software engineering to prove effective it must use principled notions of agents and enabling specification and reasoning, while still considering routes to practical implementation. This paper deals with the issue of individual agent specification and construction, departing from the conceptual basis provided by the smart agent framework. smart offers a descriptive specification of an agent architecture but omits consideration of issues relating to construction and control. In response, we introduce two new views to complement smart: a behavioural specification and a structural specification which, together, determine the components that make up an agent, and how they operate. In this way, we move from abstract agent system specification to practical implementation. These three aspects are combined to create an agent construction model, actsmart, which is then used to define the AgentSpeak(L) architecture in order to illustrate the application of actsmart.

Houses built from accommodating cabins

The current economic crisis has meant, particularly in Spain, the almost cessation of new buildings construction. This deep crisis will mean in future an irreversible change in the Spanish construction model, based to date almost exclusively on the brick. After focusing on the Spanish property boom and examining its impact on the concept of housing (in a few years the house has moved forward from being contemplated exclusively as a primary good to be also considered a capital asset), we analyse the influence that this transformation has had on architecture (housing typology, building methods, the architectural profession and the architect training) and offers architectural alternatives –trough the university– to the present crisis. The project “Houses built from accommodating cabins” is part of a larger research within the line “Modular Architecture” developed by the Research Group “Design and Industrial Production”, belonging to the Technical University of Madrid, which aims to respond to the need for decent housing at an affordable price, by offering through Internet the plans, resources and other technical details required to build a house oneself. The proposed houses are built from the combination of industrially made modules (accommodation cabins, which are prefabricated modules usually used as provisional constructions in conventional building works), prefabricated subsystems and other catalogue components available on the market, all they set together by dry joints.

Accommodating cabins as a new way of building houses

The current economic crisis has meant, particularly in Spain, the almost cessation of new buildings construction. This deep crisis will mean in future an irreversible change in the Spanish construction model, based to date almost exclusively on the brick. The project “Accommodating cabins as a new way of building houses” is part of a larger research within the line “Modular Architecture” developed by the Research Group “Design and Industrial Production”, belonging to the Technical University of Madrid, which aims to respond to the need for decent housing at an affordable price, by offering through Internet the plans, resources and other technical details required to build a house oneself. The proposed houses are built from the combination of industrially made modules (accommodation cabins, which are prefabricated modules usually used as provisional constructions in conventional building works), prefabricated subsystems and other catalogue components available on the market, all they set together by dry joints.

El modelo constructivo: la influencia de la técnica en la teoría de la arquitectura (1840-1899)

La hipótesis de partida de esta tesis es que existe una influencia directa entre la técnica que se desarrolla durante el segundo período del s. XIX y el cambio sustancial de los conceptos y de la teoría arquitectónica que se da en esos mismos años. Dicha influencia genera nuevos modelos constructivos que serán la base de la arquitectura moderna. Para llegar a la confirmación de la hipótesis, se han planteado tres objetivos principales que responden a los tres capítulos principales de la misma. En primera instancia, se establecen las condiciones teóricas del debate arquitectónico entre las fechas estudiadas. Se analiza el concepto de modelo y «estilo» para evaluar si, efectivamente, hubo cambio o no. También se analizará si los arquitectos eran conscientes de la necesidad de una nueva arquitectura que respondiese a la funcionalidad que el progreso requería. Para comprobar que dicho cambio se ha producido a todos los niveles hasta el punto de redefinir el modelo constructivo se escoge un ejemplo práctico que cumpla las condiciones necesarias para sustentar o no la tesis y se investiga sobre si sucede o no el cambio. A continuación, se analizará la situación de la técnica y de los avances tecnológicos en el período estudiado. Es importante contrastar que realmente hay un conocimiento y una conciencia verdadera de cambio entre los teóricos y los arquitectos que están construyendo en ese momento. Confirmar que dicha conexión existe es vital para la investigación; para eso, se analizará y se profundizará en las conexiones entre la arquitectura y la ingeniería (o los avances tecnológicos) para entender la implicación de uno con el otro. Con este fin, se han estudiado las distintas publicaciones periódicas de la época; sobre todo la más relevante y la que primero se editó, que fue La revue générale de l’architecture; me he apoyado en ella. Es un documento que mensualmente recoge cambios, avances y debates. Tuvo una grandísima divulgación; todo docente, arquitecto e ingeniero de la época tenía un acceso fácil y directo a dicha publicación. Por último, a raíz de una construcción ideal proyectada por uno de los grandes arquitectos teóricos de la época, se reflexiona sobre si esa arquitectura supone realmente una comprensión y una conciencia de los nuevos modelos arquitectónicos, definidos por una técnica en progreso, o si responde exclusivamente a una utopía arquitectónica como tantas otras se habían esbozado con anterioridad por grandes teóricos. Para poder definir la geometría de este elemento estructural, se ha realizado un modelado tridimensional que permite calcular la estructura a través de un proceso de elementos finitos. El propósito de este cálculo no es exclusivamente saber si la estructura era viable o no en aquella época, sino también comprender si la definición de estos originales elementos estructurales implicaba una concepción nueva de las estructuras tridimensionales y eso significa que empezaba a germinar un cambio sustancial en la teoría de la arquitectura, con la búsqueda de un nuevo modelo constructivo derivado de los avances técnicos. De este modo queda demostrado que el modelo constructivo ha cambiado definitivamente por un modelo mucho más versátil y sobre todo con una gran capacidad de adaptación, esto combinado a su vez con una proliferación de patentes que intentan y buscan una estandarización del modelo constructivo y que no son, en ningún caso, un modelo en sí. Como última conclusión, queda argumentado que en aquella época ya se tenía una gran intuición estructural; a pesar de que el cálculo matemático era todavía algo relativamente nuevo, se manejaban de forma instintiva líneas de cargas, combinación de materiales y nuevas formas, que ayudarán a crear los modelos de los próximos años y que serán la base del cálculo numérico posterior. ABSTRACT The hypothesis of this thesis is that there is a direct influence between the technique developed during the second period of the XIX century and the substantial change in the concepts and in the architectural theory that occurs in those years. This influence develops new building models that will be the basis of modern architecture. To confirm this hypothesis, we present three principal objectives that corresponds to the three principals chapsters of the text. First, we establish the theoretical conditions of the architectural debate between the dates studied. We analyze the concepts of model and “style” to assess whether there was a change or not. We consider as well if architects were aware of the need for a new architecture to respond to the functionality needs that progress demanded. To verify that the change occurred at all levels to the extent of redefining the building model we choose a practical example that fulfills the necessary conditions to support or not the thesis and we investigate whether or not the change happens. Next, we analyze the status of technical and technological advances in the study period of study. It is important to contrast that there is a real knowledge and awareness of change between the theorists and architects who are building at the time. Confirming that that connection exists is vital for the research; for that, we will analyze and deepen into the connections between architecture and engineering (or technological progress) to understand the implication of one into the other. To this end, we have studied various publications of the time; especially the most relevant and the first published, La Revue générale de l’architecture; I have relied on it. This is a monthly document that includes changes, developments and debates. It had a very great disclosure; every teacher, architect and engineer of the time had a direct and easy access to this publication. Finally, following theoretical ideal construction projected by one of the great architects of the time, we reflect on whether that architecture really represents an understanding and awareness of the new architectural models defined by a technique in progress, or if it only responds to an architectural utopia as the ones outlined earlier by the great theorists. To be able to define the geometry of this structural item, we have carried out a three-dimensional modeling that enables us to calculate the structure through a process of finite elements. The purpose of this calculation is not exclusively understanding whether the structure was viable or not at the time, but also understanding if the definition of these original structural elements involved a new concept of three-dimensional structures and if that involved the beginning of a substantial change in theory of architecture, with the search for a new construction model derived from technical advances. In this way it is demonstrated that the building model has definitely changed for a much more versatile one and above all with a high adaptation capacity, this combined in turn with a proliferation of patents that try and seek a standardization of the building model and are not, in any case, a model in itself. As a final conclusion, it is argued that at the time a major structural intuition was present; even though the math calculation was still relatively new, in an instinctively way load lines, combination of materials and new forms were taken into account, that will help to create models in the coming years and which will form the basis of subsequent numerical calculation.

Modelo para formação dinâmica de rede de fornecedores em empresas estendidas

Supply chains have become an important focus for competitive advantage. The performance of a company increasingly depends on its ability to maintain effective and efficient relationships with its suppliers and customers. The extended enterprise (i.e. composed of several partners) needs to be dynamically formed in order to be agile and adaptable. According to the Digital Manufacturing paradigm, companies have to be able to quickly share and disseminate information regarding planning, designing and manufacturing of products. Additionally, they must be responsive to all technical and business determinants, as well as be assessed and certified for guaranteed performance. The current research intends to present a solution for the dynamic composition of the extended enterprise, formed to take advantage of market opportunities quickly and efficiently. A construction model was developed. This construction model consists of: information model, protocol model and process model. The information model has been defined based on the concepts of Supply Chain Operations Reference model (SCOR®). In this model is defined information for negotiating the participation of candidate companies in the dynamic establishment of a network for responding to a given demand for developing and manufacturing products, in seven steps as follows: request for information; request for qualification; alignment of strategy; request for proposal; request for quotation; compatibility of process; and compatibility of system. The protocol model has been elaborated and inspired in the OSI, this model provides a framework for linking customers and suppliers, indicates a sequence to be followed, in order to selecte companies to become suppliers. The process model has been implemented by means of process modeling according to the BPMN standard and, in turn, implemented as a web-based application that runs the process through its several steps, which uses forms to gather data. An application example in the context of the oil and gas industry is used for demonstrating the solution concept.

A model for assessing and correcting construction project health

Abstract Maintaining the health of a construction project can help to achieve the desired outcomes of the project. An analogy is drawn to the medical process of a human health check where it is possible to broadly diagnose health in terms of a number of key areas such as blood pressure or cholesterol level. Similarly it appears possible to diagnose the current health of a construction project in terms of a number of Critical Success Factors (CSFs) and key performance indicators (KPIs). The medical analogy continues into the detailed investigation phase where a number of contributing factors are evaluated to identify possible causes of ill health and through the identification of potential remedies to return the project to the desired level of health. This paper presents the development of a model that diagnoses the immediate health of a construction project, investigates the factors which appear to be causing the ill health and proposes a remedy to return the project to good health. The proposed model uses the well-established continuous improvement management model (Deming, 1986) to adapt the process of human physical health checking to construction project health.

Business model construction : the importance of regime of appropriability strategies

To date, most theories of business models have theorized value capture assuming that appropriability regimes were exogenous and that the firm would face a unique, ideal-typical appropriability regime. This has led theory contributions to focus on governance structures to minimize transaction costs, to downplay the interdepencies between value capture and value creation, and to ignore revenue generation strategies. We propose a reconceptualization of business models value capture mechanisms that rely on assumptions of endogeneity and multiplicity of appropriability regimes. This new approach to business model construction highlights the interdependencies and trade-offs between value creation and value capture offered by different types and combinations of appropriability regimes. The theory is illustrated by the analysis of three cases of open source software business models

Structural equation model of construction contract dispute potential

This paper presents the results of a structural equation model (SEM) for describing and quantifying the fundamental factors that affect contract disputes between owners and contractors in the construction industry. Through this example, the potential impact of SEM analysis in construction engineering and management research is illustrated. The purpose of the specific model developed in this research is to explain how and why contract related construction problems occur. This study builds upon earlier work, which developed a disputes potential index, and the likelihood of construction disputes was modeled using logistic regression. In this earlier study, questionnaires were completed on 159 construction projects, which measured both qualitative and quantitative aspects of contract disputes, management ability, financial planning, risk allocation, and project scope definition for both owners and contractors. The SEM approach offers several advantages over the previously employed logistic regression methodology. The final set of structural equations provides insight into the interaction of the variables that was not apparent in the original logistic regression modeling methodology.

Construction, application and validation of selection evaluation model (SEM) for intelligent HVAC control system

Design teams are confronted with the quandary of choosing apposite building control systems to suit the needs of particular intelligent building projects, due to the availability of innumerable ‘intelligent’ building products and a dearth of inclusive evaluation tools. This paper is organised to develop a model for facilitating the selection evaluation for intelligent HVAC control systems for commercial intelligent buildings. To achieve these objectives, systematic research activities have been conducted to first develop, test and refine the general conceptual model using consecutive surveys; then, to convert the developed conceptual framework into a practical model; and, finally, to evaluate the effectiveness of the model by means of expert validation. The results of the surveys are that ‘total energy use’ is perceived as the top selection criterion, followed by the‘system reliability and stability’, ‘operating and maintenance costs’, and ‘control of indoor humidity and temperature’. This research not only presents a systematic and structured approach to evaluate candidate intelligent HVAC control system against the critical selection criteria (CSC), but it also suggests a benchmark for the selection of one control system candidate against another.

An example of developing a business model for information and communication technologies (ICT) adoption on construction projects – the National Museum of Australia project

Effective use of information and communication technologies (ICT) is necessary for delivering efficiency and improved project delivery in the construction industry. Convincing clients or contracting organisations to embrace ICT is a difficult task, there are few templates of an ICT business model for the industry to use. ICT application in the construction industry is relatively low compared to automotive and aerospace industries. The National Museum of Australia project provides a unique opportunity for investigating and reporting on this deficiency in publicly available knowledge. Concentrates on the business model content and objectives, briefly indicates the evaluation framework that was used to evaluate ICT effectiveness.