Construction management strategies : a theory of construction management

The construction industry has become a truly global network of interconnected stakeholders making demands which require the involvement of skilled workforces from all over the world. Construction Management Strategies sets the foundations for understanding and managing construction’s inherent complexity and uniqueness. It establishes clear definitions of commonly accepted terms like built environment, construction, civil engineering, etc. which are often given confusing and conflicting interpretations. It cuts through the plethora of overlapping role titles currently used in the construction sector that make it difficult to establish how projects are actually managed.

EMPRESAS DA CONSTRUÇÃO CIVIL DO MUNICÍPIO DE ARACAJU-SE: Percepções sobre Responsabilidade Social Empresarial

The companies are part of an important segment of the society, besides, it exercises a significant contribution, being also responsible for helping in the improvement of the quality of life of the population. Like this being, to present research looked for to investigate the perception that the entrepreneurs of the building site of Aracaju/SE have concerning the theme Business Social Responsibility (RSE). besides the perceptions, it was part also of the research, to know the entrepreneur's of the building site social construction and the possible practices of Social Responsibility. The research grew in two different moments. The first looked for the theoretical embasamento, trying to study the economical sociology, understanding the effects provoked by the economy, understanding to you reason them that you/they took to the appearance of the perceptions that you/they permeate the historicity among the market, the nascedouro of the associations as company and his/her dynamics in the society. It was also researched, the concept of social responsibility in national and local extent, as well as, the contextualização of the state of Sergipe, detaching the municipal district of Aracaju, and describing how it happened his/her development starting from what is considered urbanization. In the second moment, the accomplishment of interviews in five companies, allowed to notice the entrepreneurs' perception concerning business social responsibility, as well as, actions of different characteristics in four of the samples. In these actions, they are patronage in cultural events, donations of projects for charity institutions, the concern with the preservation of the environment in the use of work materials ecologically correct, preventive health and employees' training. Concluding the research, I introduce the conclusions which it allowed to arrive me, and I point some suggestions for future researches that enlarge the reflection on this theme

Research and development program for highway construction engineering management. Final report.

Federal Highway Administration, Washington, D.C.

Influência da vermiculita expandida na resistência à compressão e reologia de pastas cimentantes de poços de petróleo

Several problems related to the loss of hydraulic seal in oilwells, causing gas migration and/or contamination of the production zone by water, have been reported. The loss of the hydraulic seal is a consequence of cracks which can be occasioned either by the invasion of gas during the wait on cement or by the expansion of the casing causing the fracture of the cement sheath. In case of the pressure of the formation is higher than the pressure in the annulus, gas can migrate into the slurry and form microannulus, which are channels where gas migrates after the cement is set. Cracks can be also occasioned by the fracture of the cement sheath when it does not withstand the thermal and dynamic loads. In reservoirs where the oil is heavy, steam water injection operation is required in order to get the oil flowing. This operation increases the temperature of the casing, and then it expands and causes the fracture of the cement sheath in the annulus. When the failures on the cement are detected, remedial cementing is required, which raise costs caused by the interventions. Once the use of cement in the construction civil sector is older than its use in the petroleum sector, it is common to bring technologies and solutions from the civil construction and apply them on the petroleum area. In this context, vermiculite, a mineral-clay widely encountered in Brazil, has been used, on its exfoliated form, in the civil construction, especially on the manufacture of lights and fireproof concretes with excellent thermal and acoustical properties. It has already been reported in scientific journals, studies of the addition of exfoliated vermiculite in Portland cements revealing good properties related to oilwell cementing operations. Thus, this study aimed to study the rheological behavior, thickening time, stability and compressive strength of the slurries made of Portland cement and exfoliated vermiculite in 5 different compositions, at room temperature and heated. The results showed that the compressive strength decreased with the addition of exfoliated vermiculite, however the values are still allowed for oiwell cementing operations. The thickening time of the slurry with no exfoliated vermiculite was 120 min and the thickening time of the slurry with 12 % of exfoliated vermiculite was 98 min. The stability and the rheological behavior of the slurries revealed that the exfoliated vermiculite absorbed water and therefore increased the viscosity of the slurries, even though increasing the factor cement-water. The stability experiment carried out at 133 ºF showed that, there was neither sedimentation nor reduction of the volume of the cement for the slurry with 12 % of exfoliated vermiculite. Thus, the addition of exfoliated vermiculite accelerates the set time of the cement and gives it a small shrinkage during the wait on cement, which are important to prevent gas migration

Estudo de aproveitamento do resíduo do beneficiamento de caulim como matéria prima na produção de pozolanas para cimentos compostos e pozolânicos

O emprego de resíduos na construção civil pode vir a se tornar uma atividade de extrema importância e mais freqüente, principalmente, pela quantidade disponível com potencialidades de reciclagem, possibilitando minimização dos impactos ambientais. As indústrias que beneficiam o caulim para ser utilizado na indústria de papel são responsáveis por gerar dois tipos de resíduos. Um deles, o resíduo contendo o argilomineral caulinita, apresenta potencialidade de ser utilizado como pozolanas na indústria da construção civil. Essa pesquisa avaliou a viabilidade técnica de produção de pozolanas provenientes de misturas de diversos percentuais do resíduo caulinítico com calcário, com vistas a incrementar a reatividade. Estudou-se os teores de substituição de cimento pelas pozolanas em 10%, 20%, 30%, 40%, 50% e 60%. O cimento utilizado foi do tipo CP I S 32 e as pozolanas foram produzidas em laboratório. Foram realizados os seguintes ensaios nos cimentos experimentais: massa específica, área superficial específica, água de consistência normal da pasta, tempo de pega e resistência à compressão. Nas pozolanas, além das análises química e física, foram realizados ensaios mineralógicos. Baseando-se nos resultados encontrados e na literatura técnica, observou-se que a fabricação da pozolana mostrou-se eficaz, pois permitiu aos cimentos alcançar resistências à compressão muito maiores à referência mesmo com teores elevados de incorporação. É lícito concluir que a incorporação do calcário na calcinação do resíduo proveniente do beneficiamento do caulim confirmou ser uma excelente alternativa na produção de pozolanas de alta reatividade, podendo ser empregadas como adições minerais aos cimentos compostos ou pozolânicos substituindo argilas naturais calcinadas e principalmente na fabricação de elementos pré-fabricados em conjunto com fibras em geral.

EVALUATION OF INTELLIGENT COMPACTION CONTROL IN THE M-189 RECONSTRUCTION PROJECT AT IRON RIVER, MICHIGAN

This research evaluated an Intelligent Compaction (IC) unit on the M-189 highway reconstruction project at Iron River, Michigan. The results from the IC unit were compared to several traditional compaction measurement devices including Nuclear Density Gauge (NDG), Geogauge, Light Weight Deflectometer (LWD), Dynamic Cone Penetrometer (DCP), and Modified Clegg Hammer (MCH). The research collected point measurements data on a test section in which 30 test locations on the final Class II sand base layer and the 22A gravel layer. These point measurements were compared with the IC measurements (ICMVs) on a point-to-point basis through a linear regression analysis. Poor correlations were obtained among different measurements points using simple regression analysis. When comparing the ICMV to the compaction measurements points. Factors attributing to the weak correlation include soil heterogeneity, variation in IC roller operation parameters, in-place moisture content, the narrow range of the compaction devices measurement ranges and support conditions of the support layers. After incorporating some of the affecting factors into a multiple regression analysis, the strength of correlation significantly improved, especially on the stiffer gravel layer. Measurements were also studied from an overall distribution perspective in terms of average, measurement range, standard deviation, and coefficient of variance. Based on data analysis, on-site project observation and literature review, conclusions were made on how IC performed in regards to compaction control on the M-189 reconstruction project.

Valorização da participação da engenharia de produção no projeto simultâneo de empresa construtora-incorporadora.

A falta de integração entre áreas de conhecimento pode gerar efeitos negativos no processo de projeto em uma construtora-incorporadora. Em muitos casos, o projeto do produto é elaborado pela incorporadora sem qualquer participação da área responsável pela produção e de outras áreas da construtora. O trabalho apresenta uma análise sobre a gestão de projetos na construção de edifícios, valorizando a participação da engenharia de produção nessa fase, apoiando-se nos conceitos de Projeto Simultâneo, e propõe diretrizes para sua aplicação na construtora-incorporadora Cyrela, com enfoque na construtibilidade e manutenibilidade. Para desenvolver a pesquisa foi realizada uma revisão bibliográfica sobre as características da gestão de projetos, da Engenharia de Produção na construção de edifícios, e sobre a Engenharia Simultânea no desenvolvimento de produtos com comparativo de modelos de indústrias seriadas para a construção civil, incluindo a interação entre os agentes do processo. Como resultados são apresentados: uma análise da interação entre os agentes do processo; a ligação entre pessoas, processos e tecnologia; os conceitos de construtibilidade, manutenibilidade e retroalimentação na interface com projetos. São igualmente feitas análises das tendências de modernização na gestão dos projetos por meio da modelagem da informação da construção e, apoiado em estudo de caso, são apresentadas as experiências do Projeto Simultâneo aplicadas na Cyrela. Por fim, são apresentadas as diretrizes para participação da Engenharia de Produção da Construtora e Incorporadora Cyrela no Projeto Simultâneo, sendo essa a principal contribuição do trabalho. Embora suas contribuições possam servir de referência para demais empresas do setor, essa pesquisa foi desenvolvida para aplicações práticas da Cyrela, construtora-incorporadora que atua na construção de edifícios em todas as regiões do Brasil.

Illustrated technical dictionary in six languages, English, German, French, Russian, Italian, Spanish /

Vols. 7-13 have added t.p.: Schlomann-Oldenbourgh illustrierte technische wörterbücher, unter mitwirkung hervorragender fachieute des in- und auslandes, hrsg. von Alfred Schlomann ... Müchen und Berlin, Druck und verlag von R. Oldenbourg; London, Constable & Co., etc.

Influência da vermiculita expandida na resistência à compressão e reologia de pastas cimentantes de poços de petróleo

Several problems related to the loss of hydraulic seal in oilwells, causing gas migration and/or contamination of the production zone by water, have been reported. The loss of the hydraulic seal is a consequence of cracks which can be occasioned either by the invasion of gas during the wait on cement or by the expansion of the casing causing the fracture of the cement sheath. In case of the pressure of the formation is higher than the pressure in the annulus, gas can migrate into the slurry and form microannulus, which are channels where gas migrates after the cement is set. Cracks can be also occasioned by the fracture of the cement sheath when it does not withstand the thermal and dynamic loads. In reservoirs where the oil is heavy, steam water injection operation is required in order to get the oil flowing. This operation increases the temperature of the casing, and then it expands and causes the fracture of the cement sheath in the annulus. When the failures on the cement are detected, remedial cementing is required, which raise costs caused by the interventions. Once the use of cement in the construction civil sector is older than its use in the petroleum sector, it is common to bring technologies and solutions from the civil construction and apply them on the petroleum area. In this context, vermiculite, a mineral-clay widely encountered in Brazil, has been used, on its exfoliated form, in the civil construction, especially on the manufacture of lights and fireproof concretes with excellent thermal and acoustical properties. It has already been reported in scientific journals, studies of the addition of exfoliated vermiculite in Portland cements revealing good properties related to oilwell cementing operations. Thus, this study aimed to study the rheological behavior, thickening time, stability and compressive strength of the slurries made of Portland cement and exfoliated vermiculite in 5 different compositions, at room temperature and heated. The results showed that the compressive strength decreased with the addition of exfoliated vermiculite, however the values are still allowed for oiwell cementing operations. The thickening time of the slurry with no exfoliated vermiculite was 120 min and the thickening time of the slurry with 12 % of exfoliated vermiculite was 98 min. The stability and the rheological behavior of the slurries revealed that the exfoliated vermiculite absorbed water and therefore increased the viscosity of the slurries, even though increasing the factor cement-water. The stability experiment carried out at 133 ºF showed that, there was neither sedimentation nor reduction of the volume of the cement for the slurry with 12 % of exfoliated vermiculite. Thus, the addition of exfoliated vermiculite accelerates the set time of the cement and gives it a small shrinkage during the wait on cement, which are important to prevent gas migration

Animal Lovers, Bridge-Builders, and Supervising Watchdogs: Framing and Civil Society Construction by Japanese Pro-Animal Organizations in the Kansai and Tokyo Areas

Unlike their counterparts in Europe and America, the citizen organizations acting for the well-being of animals in Japan have not received scholarly attention. In this research, I explore the activities of twelve Japanese pro-animal organizations in Tokyo and Kansai area from the perspective of social movement and civil society studies. The concept of a ‘pro-animal organization’ is used to refer generally to the collectives promoting animal well-being. By using the collective action frame analysis and the three core framing tasks – diagnostic, prognostic, and motivational – as the primarily analytical tools, I explore the grievances, tactics, motivational means, constructions of agency and identity as well as framing of civil society articulated in the newsletters and the interviews of the twelve organizations I interviewed in Japan in 2010. As the frame construction is always done in relation to the social and political context, I study how the organizations construct their roles as civil society actors in relation to other actors, such as the state, and the idea of citizen activism. The deficiencies in the animal welfare law and lack of knowledge among the public are identified as the main grievances. The primary tactic to overcome these problems was to educate and inform the citizens and authorities, because most organizations lack the channels to influence politically. The audiences were mostly portrayed as either ignorant bystanders or potential adherents. In order to motivate people to join their cause and to enforce the motivation within the organization, the organizations emphasized their uniqueness, proved their efficiency, claimed credit and celebrated even small improvements. The organizations tended to create three different roles for citizen pro-organizations in civil society: reactive, apolitical and emphatic animal lovers concentrating on saving individual animals, proactive, educative bridge-builders seeking to establish equal collaborative relations with authorities, and corrective, supervising watchdogs demanding change in delinquencies offending animal rights. Based on the results of this research, I suggest that by studying how and why the different relations between civil society and the governing actors of the state are constructed, a more versatile approach to citizens’ activism in its context can be achieved.

Site Controller: A System for Computer-Aided Civil Engineering and Construction

A revolution\0\0\0 in earthmoving, a $100 billion industry, can be achieved with three components: the GPS location system, sensors and computers in bulldozers, and SITE CONTROLLER, a central computer system that maintains design data and directs operations. The first two components are widely available; I built SITE CONTROLLER to complete the triangle and describe it here. SITE CONTROLLER assists civil engineers in the design, estimation, and construction of earthworks, including hazardous waste site remediation. The core of SITE CONTROLLER is a site modelling system that represents existing and prospective terrain shapes, roads, hydrology, etc. Around this core are analysis, simulation, and vehicle control tools. Integrating these modules into one program enables civil engineers and contractors to use a single interface and database throughout the life of a project.

Panels Produced from Thermoplastic Composites Reinforced with Peach Palm Fibers for Use in the Civil Construction and Furniture Industry

In order to cooperate in minimizing the problems of the current and growing volume of waste, this work aim at the production of panels made from industrial waste -thermoplastic (polypropylene; polyethylene and acrylonitrile butadiene styrene) reinforced with agro-industrial waste - peach palm waste (shells and sheaths). The properties of the panels like density, thickness swelling, water absorption and moisture content were evaluated using the ASTM D1037; EN 317; and ANSI A208.1 standards regarding particle boards. Good results were obtained with formulations of 100% plastic waste; 70% waste plastics and 30% peach palm waste; and 60% waste plastics and 40% peach palm waste.

Alternatives Panels from Waste Plastics Reinforced With Fibers of Pupunha Palm for Use in Civil Construction and Furniture Industry

In order to cooperate in minimizing the problems of the current and growing volume of waste, this work aims at the production of panels made from industrial waste -thermoplastic (Polypropylene - PP; Polyethylene - PE and Acrylonitrile Butadiene Styrene - ABS) reinforced with agro-industrial waste - pupunha palm waste (shells and sheaths). The properties of the panels were evaluated: density, thickness swelling, water absorption and moisture content. It was used the ASTM D1037; EN 317; and ANSI A208.1 standards regarding particle boards. The best results in physical tests were treatments 1 (100% waste plastic), 6 (60% plastic waste and 40% waste of pupunha) and 7 (70% waste plastic and 30% waste of pupunha). The best results in the mechanical tests were treatments 3 (30% de residuos plasticos e 70% de residuos da pupunha), 4 (40% de residuos plasticos c 60% de residuos da pupunha) and 5 (50% de residuos plasticos e 50% de residuos da pupunha). For mechanical tests it was concluded that the results of modulus of rupture and of modulus of elasticity the best treatments were those with more fibers. In the tensile tests perpendicular to the surface, it is clear that using more waste plastics leads to the best results. It was concluded that the waste can be used as raw material for the production of alternative materials mainly in civil construction and furniture industries, and it can be employed in urban or rural environment, given the concept of eco-efficient products.

The formation of the professionals for the timber industrial sector of the civil construction

The common point between the two forms of production of the wood-based sector in Brazil, one practically manufacturing and the other high technology, is in the qualification of the of the labor. In both cases, the professionals are being formed directly in the productive line and rarely with qualification in the academic area. There is not a public political education for the qualification of the labor, and the work market that does not demand qualified professionals, contributes for the sector stagnation. So, in order to excel the socio-cultural barriers in relation to the use of wood in the buildings, new attitudes are necessary in the teaching of the contents of the curricular programs, mainly, in formation of the architect and civil engineering.

Bamboo as sustainable material used in design and civil construction: species, management, characterization and applications

The use of bamboo as construction and raw material for producing products can be considered a feasible alternative to the abusive use of steel, concrete and oil byproducts. Its use can also reduce the pressure on the use of wood from native and planted forests. Although there are thousands of bamboo species spread about the world and Brazil itself has hundreds of native species, the use and basic knowledge of its characteristics and applications are still little known and little disseminated. This paper's main objective is to introduce the species, the management phases, the physical and mechanical characteristics and the experiences in using bamboo in design and civil construction as per the Bamboo Project implemented at UNESP, Bauru campus since 1994. The results are divided into: a) Field activities - description of the technological species of interest, production chain flows, types of preservative treatments and clump management practices for the development, adaptation and production of different species of culms; b) Lab experiments - physical and mechanical characterization of culms processed as laminated strips and as composite material (glue laminated bamboo – glubam); c) Uses in projects - experiences with natural bamboo and glubam in design, architecture and civil construction projects. In the final remarks, the study aims to demonstrate, through practical and laboratory results, the material's multi-functionality and the feasibility in using bamboo as a sustainable material.