61 resultados para Conques sedimentàries
Resumo:
The stratigraphic basis of this work has allowed the use of larger foraminifers in the biostratigraphic characterisation of the new Shallow Benthic Zones (SBZ). This part of the volume presents a description of the sedimentary cycles formed by the transgressive-regressive systems of the Lutetian and Bartonian in the southeastern sector of the Ebro Foreland Basin. Concerning the Lutetian deposits studied in the Amer-Vic and Empordà areas, four sedimentary cycles have been characterised. The first and second are found within the Tavertet/Girona Limestone Formation (Reguant, 1967; Pallí, 1972), while the third and fourth cycles cover the Coll de Malla Marl Formation (Clavell et al., 1970), the Bracons Formation (Gich, 1969, 1972), the Banyoles Marl Formation (Almela and Ríos, 1943), and the Bellmunt Formation (Gich, 1969, 1972). In the Bartonian deposits studied in the Igualada area, two transgressive-regressive sedimentary cycles have been characterised in the Collbàs Formation (Ferrer, 1971), the Igualada Formation (Ferrer, 1971), and the Tossa Formation (Ferrer, 1971). The Shallow Benthic Zones (SBZs) recognised within the Lutetian are the following: SBZ 13, from the Early Lutetian, in the transgressive system of the first cycle; SBZ 14, from the Middle Lutetian, in the second cycle and the lower part of the transgressive system of the third cycle; SBZ 15, from the Middle Lutetian, in the remaining parts of the third system; SBZ 16, from the Late Lutetian, throughout the fourth cycle. The association of larger foraminifers in the first and second cycles of the Bartonian in the Igualada area has been used as the basis for the definition of SBZs 17 and 18 recognised in the Bartonian of the western Tethys.
Resumo:
The Oligocene deposits of Montgat are integrated in a small outcrop made up of Cenozoic and Mesozoic rocks located in the Garraf-Montnegre horst, close to the major Barcelona fault. The Oligocene of Montgat consists of detrital sediments of continental origin mainly deposited in alluvial fan environments; these deposits are folded and affected by thrusts and strike-slip faults. They can be divided in two lithostratigraphic units separated by a minor southwest-directed thrust: (i) the Turó de Montgat Unit composed of litharenites and lithorudites with high contents of quartz, feldspar, plutonic and limestone rock fragments; and (ii) the Pla de la Concòrdia Unit composed of calcilitharenites and calcilithorudites with high contents of dolosparite and dolomicrite rock fragments. The petrological composition of both units indicates that sediments were derived from the erosion of Triassic (Buntsandstein, Muschelkalk and Keuper facies), Jurassic and Lower Cretaceous rocks (Barremian to Aptian in age). Stratigraphic and petrological data suggest that these units correspond to two coalescent alluvial fans with a source area located northwestwards in the adjoining Collserola and Montnegre inner areas. Micromammal fossils (Archaeomys sp.) found in a mudstone layer of the Pla de la Concòrdia Unit assign a Chattian age (Late Oligocene) to the studied materials. Thus, the Montgat deposits are the youngest dated deposits affected by the contractional deformation that led to the development of the Catalan Intraplate Chain. Taking into account that the oldest syn-rift deposits in the Catalan Coastal Ranges are Aquitanian in age, this allows to precise that the change from a compressive to an extensional regime in this area took place during latest Oligocene-earliest Aquitanian times. This age indicates that the onset of crustal extension related to the opening of the western Mediterranean Basin started in southern France during latest Eocene-early Oligocene and propagated southwestward, affecting the Catalan Coastal Ranges and the northeastern part of the Valencia trough during the latest Chattian-earliest Aquitanian times.
Resumo:
The stratigraphic basis of this work has allowed the use of larger foraminifers in the biostratigraphic characterisation of the new Shallow Benthic Zones (SBZ). This part of the volume presents a description of the sedimentary cycles formed by the transgressive-regressive systems of the Lutetian and Bartonian in the southeastern sector of the Ebro Foreland Basin. Concerning the Lutetian deposits studied in the Amer-Vic and Empordà areas, four sedimentary cycles have been characterised. The first and second are found within the Tavertet/Girona Limestone Formation (Reguant, 1967; Pallí, 1972), while the third and fourth cycles cover the Coll de Malla Marl Formation (Clavell et al., 1970), the Bracons Formation (Gich, 1969, 1972), the Banyoles Marl Formation (Almela and Ríos, 1943), and the Bellmunt Formation (Gich, 1969, 1972). In the Bartonian deposits studied in the Igualada area, two transgressive-regressive sedimentary cycles have been characterised in the Collbàs Formation (Ferrer, 1971), the Igualada Formation (Ferrer, 1971), and the Tossa Formation (Ferrer, 1971). The Shallow Benthic Zones (SBZs) recognised within the Lutetian are the following: SBZ 13, from the Early Lutetian, in the transgressive system of the first cycle; SBZ 14, from the Middle Lutetian, in the second cycle and the lower part of the transgressive system of the third cycle; SBZ 15, from the Middle Lutetian, in the remaining parts of the third system; SBZ 16, from the Late Lutetian, throughout the fourth cycle. The association of larger foraminifers in the first and second cycles of the Bartonian in the Igualada area has been used as the basis for the definition of SBZs 17 and 18 recognised in the Bartonian of the western Tethys.
Resumo:
The Oligocene deposits of Montgat are integrated in a small outcrop made up of Cenozoic and Mesozoic rocks located in the Garraf-Montnegre horst, close to the major Barcelona fault. The Oligocene of Montgat consists of detrital sediments of continental origin mainly deposited in alluvial fan environments; these deposits are folded and affected by thrusts and strike-slip faults. They can be divided in two lithostratigraphic units separated by a minor southwest-directed thrust: (i) the Turó de Montgat Unit composed of litharenites and lithorudites with high contents of quartz, feldspar, plutonic and limestone rock fragments; and (ii) the Pla de la Concòrdia Unit composed of calcilitharenites and calcilithorudites with high contents of dolosparite and dolomicrite rock fragments. The petrological composition of both units indicates that sediments were derived from the erosion of Triassic (Buntsandstein, Muschelkalk and Keuper facies), Jurassic and Lower Cretaceous rocks (Barremian to Aptian in age). Stratigraphic and petrological data suggest that these units correspond to two coalescent alluvial fans with a source area located northwestwards in the adjoining Collserola and Montnegre inner areas. Micromammal fossils (Archaeomys sp.) found in a mudstone layer of the Pla de la Concòrdia Unit assign a Chattian age (Late Oligocene) to the studied materials. Thus, the Montgat deposits are the youngest dated deposits affected by the contractional deformation that led to the development of the Catalan Intraplate Chain. Taking into account that the oldest syn-rift deposits in the Catalan Coastal Ranges are Aquitanian in age, this allows to precise that the change from a compressive to an extensional regime in this area took place during latest Oligocene-earliest Aquitanian times. This age indicates that the onset of crustal extension related to the opening of the western Mediterranean Basin started in southern France during latest Eocene-early Oligocene and propagated southwestward, affecting the Catalan Coastal Ranges and the northeastern part of the Valencia trough during the latest Chattian-earliest Aquitanian times.
Resumo:
En aquest treball s’ha estudiat la variabilitat temporal i espacial en l’acumulació de sediment fi a la llera del riu Isàbena (Conca de l’Ebre) al llarg d’un any (1 de Juny de 2007 al 31 de maig de 2008) així com la seva relació amb l’arribada de sediments a l’embassament de Barasona, amb el mètode directe de camp, en aquest cas el cilindre de resuspensió. Aquesta tècnica s’ha aplicat a quatre seccions ubicades al tram baix de l’Isàbena. Amb les dades obtingudes, s’ha analitzat la dinàmica de les acumulacions a les diferents estacions de l’any, tractant de trobar patrons característics.
Resumo:
Este trabajo examina la magnitud y la frecuencia del transporte de sedimento (material disuelto, sedimento en suspensión y carga de fondo) en la cuenca de la riera de Arbúcies (Cordilleras Costeras Catalanas), a partir de los caudales diarios del periodo 1967-1992 y de las muestras de agua y sedimento obtenidas durante los años 1991 y 1992. Los resultados indican que el transporte en disolución es más uniforme en el tiempo que el transporte de material sólido, tanto en suspensión como de fondo. Los cálculos muestran que la carga sólida total depende sobre todo de crecidas frecuentes y de magnitud moderada, correspondientes al nivel de cauce lleno (bankfull). Cabe señalar, en este sentido, que los caudales bankfull suceden el 2,2% del tiempo y transportan el 56% del sedimento en suspensión y el 31% de la carga de fondo total anual. El caudal efectivo para el transporte de sedimento en este río es, por tanto, un suceso relativamente frecuente y de idéntica magnitud al caudal geomorfológicamente dominante o bankfull.
Resumo:
En el presente trabajo se aborda el estudio de una cuenca sedimentaria mediante la utilización conjunta de técnicas de cartografía geológica y datos de subsuelo, provenientes del análisis de sondeos mecánicos y de la determinación de las anomalías de la gravedad. La cuenca presenta una geometría asimétrica en forma de semigraben orientado segun la dirección regional ENE-OSO, controlado por fallas normales en dicha dirección en su límite NO, mientras que por el SE está delimitado por una discordancia. La existencia de un sistema asociado de fracturas, ortogonalmente dispuestas, complica el dispositivo anterior, resultando un basamento estructurado en bloques que configuran pequeñas subcuencas. La modelización gravimétrica de la cuenca en 3D ha permitido obtener un modelo de gran resolución para la geometria del basamento. El modelo geofísico obtenido ha sido contrastado con los datos provenientes de los sondeos...
Resumo:
En el presente trabajo se aborda el estudio de una cuenca sedimentaria mediante la utilización conjunta de técnicas de cartografía geológica y datos de subsuelo, provenientes del análisis de sondeos mecánicos y de la determinación de las anomalías de la gravedad. La cuenca presenta una geometría asimétrica en forma de semigraben orientado segun la dirección regional ENE-OSO, controlado por fallas normales en dicha dirección en su límite NO, mientras que por el SE está delimitado por una discordancia. La existencia de un sistema asociado de fracturas, ortogonalmente dispuestas, complica el dispositivo anterior, resultando un basamento estructurado en bloques que configuran pequeñas subcuencas. La modelización gravimétrica de la cuenca en 3D ha permitido obtener un modelo de gran resolución para la geometria del basamento. El modelo geofísico obtenido ha sido contrastado con los datos provenientes de los sondeos...
Resumo:
S u b s u r face fluid flow plays a significant role in many geologic processes and is increasingly being studied in the scale of sedimentary basins and geologic time perspective. Many economic resources such as petroleum and mineral deposits are products of basin scale fluid flow operating over large periods of time. Such ancient flow systems can be studied through analysis of diagenetic alterations and fluid inclusions to constrain physical and chemical conditions of fluids and rocks during their paleohy d r og e o l ogic evolution. Basin simulation models are useful to complement the paleohy d r og e o l ogic record preserved in the rocks and to derive conceptual models on hydraulic basin evolution and generation of economic resources. Different types of fluid flow regimes may evo l ve during basin evolution. The most important with respect to flow rates and capacity for transport of solutes and thermal energy is gr avitational fluid flow driven by the topographic configuration of a basin. Such flow systems require the basin to be elevated above sea level. Consolidational fluid flow is the principal fluid migration process in basins below sea level, caused by loading of compressible rocks. Flow rates of such systems are several orders of magnitude below topogr a p hy driven flow. Howeve r, consolidation may create significant fluid ove rpressure. Episodic dewatering of ove rpressured compart m e n t s m ay cause sudden fluid release with elevated flow velocities and may cause a transient local thermal and chemical disequilibrium betwe e n fluid and rock. This paper gives an ove rv i ew on subsurface fluid flow processes at basin scale and presents examples related to the Pe n e d è s basin in the central Catalan continental margin including the offshore Barcelona half-graben and the compressive South-Pyrenean basin.
Resumo:
Se ha realizado el estudio sistemático de los nummulítidos pertenecientes a los géneros Nummulites y Assilina del intervalo Paleoceno Superior - Eoceno Inferior de la Cuenca Pirenaica, a partir de muestras procedentes principalmente del sector meridional de la cuenca. Los taxones descritos se han comparado con especímenes procedentes de otras cuencas de la Mesogea: Alpes suizos (Schlieren- y Gumigelflysch) y austríacos (unidades alóctonas helvéticas), norte de Italia (Verona y Vicenza), plataformas marinas adriáticas (Eslovenia y Croacia), península de Crimea (Ucrania), Cuenca de Haymana (Anatolia central, Turquía), y Salt Range (Pakistán). Se han descrito 98 taxones de nummuiítidos -entre especies y subespecies-, de los cuales: - 66 taxones del género Nummulites, pertenecientes a los grupos de N. perforatus, N. partschi, N. rotularius, N. minewensis, N. globulus, N. laevigatus, N. distans, N. heberti y N. spirectypus. - 32 taxones del género Assilina, pertenecientes a los gmpos de A. spira, A. exponens, A. subgranulosa, A. ammonea, A. canalijera y A. alpina. En este trabajo -y siguiendo las consideraciones de Loeblich y Tappan (1987)- Assilina integra las denominaciones gen6ricas tradicionales de Assilina y Operculina.
Resumo:
Mediante técnicas numéricas analizamos el efecto de una cuenca sedimentaria sobre las ondas sísmicas que la atraviesan, en el presente estudio ondas P. La cuenca sedimentaria la caracterizamos por una serie estratigráfica con un número de capas y espesor total prefijados, así como el valor medio de sus propiedades elásticas. Para cada capa individual, estos valores medios se hacen fluctuar aleatoriamente en más y en menos alrededor de sus valores medios, con un valor máximo permitido de la variación también prefijado. Los ejemplos numéricos realizados nos muestran que los parámetros que más afectan una onda que se propaga a través de una cuenca son la distancia característica o espesor de las capas individuales y la magnitud de las fluctuaciones. manifestándose la resuuesta de la serie estratigráfica como un filtro paso baja y en la aparición de resonancias. Estos efectos pueden ser observados y cuantificados a partir de un análisis de la atenuación del medio y de la dispersión de la velocidad intrínseca de las ondas P y S.
Resumo:
Treball de recerca realitzat per un alumne d’ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l’any 2008. L’objectiu de la recerca ha estat l’estudi de les condicions en què s’arriben a formar les estructures sedimentàries internes, relacionades amb un flux de tipus unidireccional. S’ha fabricat un tanc d’experimentació que, a petita escala, pogués reproduir de la manera més propera a la realitat les condicions naturals en què es formen aquest tipus d’estructures. En aquest tanc d’experimentació s’han sotmès sediments de granulometries diverses a fluxos unidireccionals de diferents intensitats. Posteriorment, s’ha fet un diagrama d’estabilitat d’estructures sedimentàries en funció de la velocitat del flux que l’origina i de la granulometria del sediment. Aquest diagrama permetrà extrapolar, quan es trobin aquestes estructures fossilitzades, en quines condicions de flux s’han originat.
Resumo:
L’anguila en els darrers 50 anys ha patit un fort declivi, es consideren diversos factors que han fet disminuir la seva població. Aquests factors són: la pesca, els obstacles, centrals hidroelèctriques, pèrdua d’hàbitat, depredació, paràsits i malalties, canvi climàtic i de corrents oceàniques. Aquesta espècie està definida per la UICN a la “llista vermella” d’espècies en perill d’extinció amb la categoria de “críticament amenaçada”. És per això que el Consell Europeu obliga a cada Estat membre que té pesqueries d’anguila a les seves conques a realitzar un PGA, que alhora, obliga a realitzar unes mesures de gestió. Una d’aquestes mesures, és la repoblació (def. Tornar a poblar un lloc amb anguiles, en aquest cas). En aquest projecte s’ha analitzat l’estat de les conques internes de Catalunya, realitzant una descripció pel que fa a l’àrea d’estudi i els impactes que s’hi poden trobar. Seguidament, mitjançant l’estudi de índex de qualitat i paràmetres ambientals, s’han indicat els trams òptims pel repoblament on pot sobreviure l’anguila degut a les condicions d’hàbitat. S’ha realitzat també un estudi comparatiu de densitats arreu de la comunitat de Catalunya, i un anàlisi de l’estat de la població d’anguila provinent del Llémena, observant al laboratori el seu estat sanitari. L’exportació d’anguila japonesa que s’ha realitzat en els darrers anys ha implantat un paràsit (A. Crassus) que li pot arribar a causar la mort
Resumo:
Els dies 14 i 15 de juliol de 2005 es va celebrar a la Facultat deLletres de la Universitat de Girona la sisena edició de l'EscolaInternacional de Medi Ambient, enguany dedicada a la gestió del'aigua i les conques fluvials i organitzada per l'Institut de MediAmbient de la Universitat de Girona i el Consorci Alba-Ter