State of Connecticut.

Scale 1:125,000: 1 in. equals approx. 2 miles.

Status of river basin projects, Connecticut : October 1987 /

"March 1988."

Early maps of the Connecticut valley in Massachusetts.

Mode of access: Internet.

The distribution and size composition of finfish, American lobster, and long-finned squid in Long Island Sound based on the Connecticut Fisheries Division Bottom Trawl Survey, 1984–1994

The distribution, abundance, and length composition of marine finfish, lobster, and squid in Long Island Sound were examined relative to season and physical features of the Sound, using Connecticut Department of Environmental Protection trawl survey data collected from 1984 to 1994. The following are presented: seasonal distribution maps for 59 species, abundance indices for 41 species, and length frequencies for 26 species. In addition, a broader view of habitat utilization in the Sound was examined by mapping aggregated catches (total catch per tow, demersal catch per tow, and pelagic catch per tow) and by comparing species richness and mean aggregate catch/tow by analysis of variance (ANOVA) among eight habitat types defined by depth interval and bottom type. For many individual species, seasonal migration patterns and preference for particular areas within Long Island Sound were evident. The aggregate distribution maps show that overall abundance was lower in the eastern Sound than the central and western portions. Demersal and pelagic temporal abundance show opposite trends—demersals were abundant in spring and declined through summer and fall, whereas pelagic abundance was low in spring and increased into fall. The analysis of habitat types revealed significant differences for both species richness and mean catch per tow. Generally, species richness was highest in habitats within the central area of the Sound and lowest in eastern habitats. The aggregate mean catch was highest in the western and central habitats, and declined eastward. (PDF file contains 199 pages.)

Coastal Survey Maps: From Historical Documents to Digital Databases

This paper describes the spatial data handling procedures used to create a vector database of the Connecticut shoreline from Coastal Survey Maps. The appendix contains detailed information on how the procedures were implemented using Geographic Transformer Software 5 and ArcGIS 8.3. The project was a joint project of the Connecticut Department of Environmental Protection and the University of Connecticut Center for Geographic Information and Analysis.

Creating Useful Products From Connecticut's 2000 LIDAR Data Set JHR 08-314 Project 07-2

The State of Connecticut owns a LIght Detection and Ranging (LIDAR) data set that was collected in 2000 as part of the State’s periodic aerial reconnaissance missions. Although collected eight years ago, these data are just now becoming ready to be made available to the public. These data constitute a massive “point cloud”, being a long list of east-north-up triplets in the State Plane Coordinate System Zone 0600 (SPCS83 0600), orthometric heights (NAVD 88) in US Survey feet. Unfortunately, point clouds have no structure or organization, and consequently they are not as useful as Triangulated Irregular Networks (TINs), digital elevation models (DEMs), contour maps, slope and aspect layers, curvature layers, among others. The goal of this project was to provide the computational infrastructure to create a first cut of these products and to serve them to the public via the World Wide Web. The products are available at http://clear.uconn.edu/data/ct_lidar/index.htm.

Coast of Rhode Island, Connecticut and Long Island, New York, Nautical Chart, 1779 (Image 1 of 2) (Raster Image)

This layer is a georeferenced raster image of the untitled, historic nautical chart: [Coast of New England from Point Judith, Rhode Island, to Great Bay, Long Island] (sheet originally published in 1779). The map is [sheet 3] from the Atlantic Neptune atlas Vol. 3 : Charts of the coast and harbors of New England, from surveys taken by Samuel Holland and published by J.F.W. Des Barres, 1781. Scale [ca. 1:128,000]. This layer is image 1 of 2 total images of the two sheet source map, representing the western portion of the map. Covers portions of Long Island Sound and the coasts of Long Island, New York (including Gardiners Island and Plum Island) and Connecticut near New London. The image is georeferenced to the surface of the earth and fit to the 'World Mercator' (WGS 84) projected coordinate system. All map collar information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows coastal features such as harbors, inlets, rocks, channels, points, coves, shoals, islands, and more. Includes also selected land features such as cities and towns. Relief is shown by hachures; depths by soundings and shading. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection. The entire Atlantic Neptune atlas Vol. 3 : Charts of the coast and harbors of New England has been scanned and georeferenced as part of this selection.

Coast of Rhode Island, Connecticut and Long Island, New York, Nautical Chart, 1779 (Image 2 of 2) (Raster Image)

This layer is a georeferenced raster image of the untitled, historic nautical chart: [Coast of New England from Point Judith, Rhode Island, to Great Bay, Long Island] (sheet originally published in 1779). The map is [sheet 4] from the Atlantic Neptune atlas Vol. 3 : Charts of the coast and harbors of New England, from surveys taken by Samuel Holland and published by J.F.W. Des Barres, 1781. Scale [ca. 1:128,000]. This layer is image 2 of 2 total images of the two sheet source map, representing the eastern portion of the map. Covers portions of Long Island Sound and the coasts of Long Island (Montauk Point), New York, Connecticut, and Rhode Island (including Block Island and Narragansett Bay). The image is georeferenced to the surface of the earth and fit to the 'World Mercator' (WGS 84) projected coordinate system. All map collar information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows coastal features such as harbors, inlets, rocks, channels, points, coves, shoals, islands, and more. Includes also selected land features such as cities and towns. Relief is shown by hachures; depths by soundings and shading. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection. The entire Atlantic Neptune atlas Vol. 3 : Charts of the coast and harbors of New England has been scanned and georeferenced as part of this selection.

Massachusetts, Connecticut, and Rhode Island, 1825 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Map of Massachusetts, Connecticut and Rhode Island : constructed from the latest authorities, drawn by D.H. Vance ; engraved by J.H. Young. It was published by A. Finley in 1825. Scale [ca. 1:700,000]. Covers also portions of New York, New Jersey, Vermont, and New Hampshire. The image inside the map neatline is georeferenced to the surface of the earth and fit to the USA Contiguous Albers Equal Area Conic projection (Meters). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as roads, drainage, state, county, and town boundaries, and more. Relief is shown pictorially. Includes statistical table. This layer is part of a selection of digitally scanned and georeferenced historic maps of New England from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Massachusetts, Connecticut, and Rhode Island, 1819 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: A map of Massachusetts, Connecticut and Rhodeisland, by E. Ruggles; engraved by M.M. Peabody. It was published in 1819. Scale [ca. 1:424,000]. Covers Massachusetts, Connecticut, Rhode Island, and portions of Vermont, New Hampshire, Maine, New York, and New Jersey. The image inside the map neatline is georeferenced to the surface of the earth and fit to the USA Contiguous Albers Equal Area Conic projection (Meters). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as roads, bridges, societies, drainage, lighthouses, coastal hazards, state, county, and town boundaries, and more. Relief shown by hachures. This layer is part of a selection of digitally scanned and georeferenced historic maps of New England from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Massachusetts, Rhode Island, and Connecticut, Postal Statistics Map, 1876 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: The "centennial" postal statistical map of Massachusetts, Rhode Island and Connecticut : showing railroads, post routes and offices together with population and valuation of cities and towns. It compiled and published by M.G. Cook and Frank O. Ellis in 1876. Scale [ca. 1:422,400]. Covers also portions of New York, Vermont, and New Hampshire. The image inside the map neatline is georeferenced to the surface of the earth and fit to the USA Contiguous Albers Equal Area Conic projection (Meters). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as railroads, post routes and offices together with population and valuation of cities and towns, distances between post offices, drainage, state, county, and town boundaries, and more. Includes table of population and valuation by county and cities of Boston and vicinity, and table of distances. This layer is part of a selection of digitally scanned and georeferenced historic maps of New England from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Connecticut, Massachusetts, and Rhode Island, 1837 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Map of Massachusetts, Rhode-Island & Connecticut : compiled from the latest authorities, engraved by J. Wells. It was published by A.F. Wilcox & Co. in 1837. Scale [ca. 1:442,000].The image inside the map neatline is georeferenced to the surface of the earth and fit to the USA Contiguous Albers Equal Area Conic projection (Meters). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as cities and towns, roads, railroads, drainage, churches, academies, banks, court houses, industry locations (e.g. mills, factories, mines, etc.), town, county, and state boundaries, and more. It also includes many inset maps of the major cities of New England.This layer is part of a selection of digitally scanned and georeferenced historic maps of New England from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates, scales, and map purposes.

Connecticut, 1795 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Connecticut : from the best authorities, delineated & engraved by Amos Doolittle. It was published in 1795 by Mathew Carey in Carey's American edition of Guthrie's Geography improved. Scale [ca. 1:460,000]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Connecticut State Plane Coordinate System (Feet) (FIPS 0600). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as roads, drainage, selected public buildings, courthouses, churches, county and town boundaries and more. Relief is shown pictorially. This layer is part of a selection of digitally scanned and georeferenced historic maps of New England from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates, scales, and map purposes.

Connecticut, 1780 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Connecticut and parts adjacent. It was published in 1780 by Cóvens and Mortier and Cóvens Junior. Scale [ca. 1:375,000]. Covers also portions of New York (including Long Island), New Jersey, and Rhode Island. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Connecticut State Plane Coordinate System (Feet) (FIPS 0600). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as roads, drainage, county and town boundaries and more. Relief is shown pictorially. This layer is part of a selection of digitally scanned and georeferenced historic maps of New England from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates, scales, and map purposes.

Connecticut, 1849 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Map of Connecticut : from actual survey, engraved by Daggett & Ely. It was published in 1849 by Brown & Parsons. Scale [ca. 1:331,000]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Connecticut State Plane Coordinate System (Feet) (FIPS 0600). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, county and town boundaries, churches, courthouses and more. Relief shown by hachures. Insets: Plan of the city of New Haven -- Plan of the city of Hartford -- New England states. Includes profile of the Farmington Canal and list of governors of Connecticut from 1676-1849. This layer is part of a selection of digitally scanned and georeferenced historic maps of New England from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates, scales, and map purposes.