32 resultados para Concisely aphoristic
Resumo:
Dissertação apresentada à Escola Superior de Artes Aplicadas do Instituto Politécnico de Castelo Branco para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Música – Área de Especialização em Piano.
Resumo:
Mode of access: Internet.
Resumo:
This paper is concerned to demonstrate the usefulness of the theory of Bourdieu, including the concepts of field, logics of practice and habitus, to understanding relationships between media and policy, what Fairclough has called the 'mediatization' of policy. Specifically, the paper draws upon Bourdieu's accessible account of the journalistic field as outlined in On television and journalism. The usefulness of this work is illustrated through a case study of a recent Australian science policy, The chance to change. As this policy went through various iterations and media representations, its naming and structure became more aphoristic. This is the mediatization of contemporary policy, which often results in policy as sound bite. The case study also shows the cross-field effects of this policy in education, illustrating how today educational policy can be spawned from developments in other public policy fields.
Resumo:
This fascicle, dedicated to the Domerian (Late Pliensbachian) ammonites faunas, is the third part of the “Atlas des fossiles caractéristiques du Lias portugais“. It follows two previous publications about the Hettangian-Sinemurian and the Carixian (Lower fifty species are concisely described and illustrated. The other groups (nautilids, belemnites, brachiopods, bivalvia...) will be published afterwards. The principal objective of the “Atlas des fossiles caractéristiques du Lias portugais“ is to make the main liassic lusitanian fossils known to a wide public. It also aims to support field studies by giving a rich iconography dedicated to the lusitanian invertebrate macrofaunas. In the case of the ammonites, all the species are described and the “Atlas” can be used as an exhaustive database for biostratigraphic and paleobiogeographic studies.
Resumo:
Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação
Resumo:
Introduction: This work was carried out on the purpose of identifying the species of phlebotomine sandflies in the municipality of Monte Negro, state of Rondonia, Brazil, that may have been transmitting the American cutaneous leishmaniasis (ACL), and concisely describe epidemiological aspects of disease. METHODS: The epidemiologic and socioeconomical indicators were obtained from government institutions and the local Municipal Secretary of Health. Phlebotomine sandflies were captured using CDC light traps between July 2006 to July 2008. The total of 1,240 of female sandflies were examined by PCR method directed to k-DNA. RESULTS: There has been a significant decrease in the incidence of ACL of about 50% over the last ten years in the municipality. A total of 1,935 specimens of 53 sandfly species were captured, three of the genus Brumptomyia genus and 50 of the genus Lutzomyia. The predominant species was Lutzomyia acanthopharynx, Lutzomyia whitmani, Lutzomyia geniculata and Lutzomyia davisi. None were positive for Leishmania sp. CONCLUSIONS: Four sandflies species were found in the State of Rondonia for the first time: Brumptomyia brumpti, Lutzomyia tarapacaensis, Lutzomyia melloi and Lutzomyia lenti. The presence of Lutzomyia longipalpis, was also captured. Socioeconomical improvement of Brazilian economy and the increase of environmental surveillance in the last 15 years collaborated in the decrease of people exposed to vectors, reducing the incidence of ACL.
Resumo:
En este artículo abordamos el uso y la importancia de las herramientas estadísticas que se utilizan principalmente en los estudios médicos del ámbito de la oncología y la hematología, pero aplicables a muchos otros campos tanto médicos como experimentales o industriales. El objetivo del presente trabajo es presentar de una manera clara y precisa la metodología estadística necesaria para analizar los datos obtenidos en los estudios rigurosa y concisamente en cuanto a las hipótesis de trabajo planteadas por los investigadores. La medida de la respuesta al tratamiento elegidas en al tipo de estudio elegido determinarán los métodos estadísticos que se utilizarán durante el análisis de los datos del estudio y también el tamaño de muestra. Mediante la correcta aplicación del análisis estadístico y de una adecuada planificación se puede determinar si la relación encontrada entre la exposición a un tratamiento y un resultado es casual o por el contrario, está sujeto a una relación no aleatoria que podría establecer una relación de causalidad. Hemos estudiado los principales tipos de diseño de los estudios médicos más utilizados, tales como ensayos clínicos y estudios observacionales (cohortes, casos y controles, estudios de prevalencia y estudios ecológicos). También se presenta una sección sobre el cálculo del tamaño muestral de los estudios y cómo calcularlo, ¿Qué prueba estadística debe utilizarse?, los aspectos sobre fuerza del efecto ¿odds ratio¿ (OR) y riesgo relativo (RR), el análisis de supervivencia. Se presentan ejemplos en la mayoría de secciones del artículo y bibliografía más relevante.
Resumo:
Diagnosis of pleural plaques (PPs) is commonly straightforward, especially when a typical appearance is observed in a context of previous asbestos exposure. Nevertheless, numerous causes of focal pleural thickening may be seen in routine practice. They may be related to normal structures, functional pleural thickening, previous tuberculosis, pleural metastasis, silicosis or other rarer conditions. An application of a rigorous technical approach as well as a familiarity with loco-regional anatomy and the knowledge of typical aspects of PP are required. Indeed, false-positive or false-negative results may engender psychological and medico-legal consequences or can delay diagnosis of malignant pleural involvement. Correct recognition of PPs is crucial, as they may also be an independent risk factor for mortality from lung cancer in asbestos-exposed workers particularly in either smokers or former/ex-smokers. Finally, the presence of PP(s) may help in considering asbestosis as a cause of interstitial lung disease predominating in the subpleural area of the lower lobes. The aim of this pictorial essay is to provide a brief reminder of the normal anatomy of the pleura and its surroundings as well as the various aspects of PPs. Afterwards, the common pitfalls encountered in PP diagnosis will be emphasized and practical clues to differentiate actual plaque and pseudoplaque will be concisely described.
Resumo:
Medicines are essential instruments to the preservation, maintenance and promotion of Health. The access to the medicine represents an important factor of social inclusion, depending on the availability of the pharmaceutical - active principle contained in the medicine that in 85% of the cases has a synthetic origin. In this scenario the importance of knowing how to make pharmaceuticals and medicines plays a significant role for the viability of the autonomous Health politics necessary for the demands of the major Nations. In this context, this work describes concisely the main aspects involved in the interdisciplinary drug discovery process, identifying the possible gorges for the successful development of innovative drugs in Brazil.
Resumo:
Les écrits aphoristiques de Friedrich Nietzsche (1844-1900) posent une évidente difficulté. Cette difficulté n’a pas échappé à l’auteur qui a recommandé à ses lecteurs, en 1887 dans sa préface à Zur Genealogie der Moral, qu’ils pratiquent en lisant ses aphorismes un « art de l’interprétation [Kunst der Auslegung] » [KSA, V, p. 255, § 8.]. Malheureusement, Nietzsche ne dit pas précisément en quoi consiste une telle lecture. Comment le lecteur doit-il alors interpréter les écrits aphoristiques de Friedrich Nietzsche? Pour répondre à cette question herméneutique nous nous servirons de la « métaphore du théâtre », présente en filigrane dans l’œuvre du philosophe. Notre mémoire se propose d’abord d’examiner ce que Nietzsche a lui-même dit au sujet des « formes brèves » (la maxime, la sentence, mais surtout l’aphorisme), et en même temps ce qu’il attend plus particulièrement d’un lecteur de ces formes d’expression. Cette analyse philologique du corpus nietzschéen se fera aussi à la lumière des commentaires que Peter Sloterdijk (1947-) et Sarah Kofman (1934-1994) ont proposés de la philosophie nietzschéenne. Après avoir nous-mêmes analysé les propos de Nietzsche portant sur ce qu’il estime être un lecteur à la hauteur de ses écrits, il sera dès lors possible de porter un jugement critique sur la pertinence et la portée des études de Sloterdijk et Kofman qui abordent eux-mêmes la mise en scène de la pensée nietzschéenne au moyen de la métaphore du théâtre. Une part importante de notre critique portera notamment sur la nature synthétique de leurs interprétations philosophiques, menées dans une perspective thématico-synthétique et trans-aphoristique, qui marginalisent à bien des égards la particularité et l’autonomie des formes d’expression au moyen desquelles Friedrich Nietzsche s’exprime.
Resumo:
This thesis is divided in to 9 chapters and deals with the modification of TiO2 for various applications include photocatalysis, thermal reaction, photovoltaics and non-linear optics. Chapter 1 involves a brief introduction of the topic of study. An introduction to the applications of modified titania systems in various fields are discussed concisely. Scope and objectives of the present work are also discussed in this chapter. Chapter 2 explains the strategy adopted for the synthesis of metal, nonmetal co-doped TiO2 systems. Hydrothermal technique was employed for the preparation of the co-doped TiO2 system, where Ti[OCH(CH3)2]4, urea and metal nitrates were used as the sources for TiO2, N and metals respectively. In all the co-doped systems, urea to Ti[OCH(CH3)2]4 was taken in a 1:1 molar ratio and varied the concentration of metals. Five different co-doped catalytic systems and for each catalysts, three versions were prepared by varying the concentration of metals. A brief explanation of physico-chemical techniques used for the characterization of the material was also presented in this chapter. This includes X-ray Diffraction (XRD), Raman Spectroscopy, FTIR analysis, Thermo Gravimetric Analysis, Energy Dispersive X-ray Analysis (EDX), Scanning Electron Microscopy(SEM), UV-Visible Diffuse Reflectance Spectroscopy (UV-Vis DRS), Transmission Electron Microscopy (TEM), BET Surface Area Measurements and X-ray Photoelectron Spectroscopy (XPS). Chapter 3 contains the results and discussion of characterization techniques used for analyzing the prepared systems. Characterization is an inevitable part of materials research. Determination of physico-chemical properties of the prepared materials using suitable characterization techniques is very crucial to find its exact field of application. It is clear from the XRD pattern that photocatalytically active anatase phase dominates in the calcined samples with peaks at 2θ values around 25.4°, 38°, 48.1°, 55.2° and 62.7° corresponding to (101), (004), (200), (211) and (204) crystal planes (JCPDS 21-1272) respectively. But in the case of Pr-N-Ti sample, a new peak was observed at 2θ = 30.8° corresponding to the (121) plane of the polymorph brookite. There are no visible peaks corresponding to dopants, which may be due to their low concentration or it is an indication of the better dispersion of impurities in the TiO2. Crystallite size of the sample was calculated from Scherrer equation byusing full width at half maximum (FWHM) of the (101) peak of the anatase phase. Crystallite size of all the co-doped TiO2 was found to be lower than that of bare TiO2 which indicates that the doping of metal ions having higher ionic radius into the lattice of TiO2 causes some lattice distortion which suppress the growth of TiO2 nanoparticles. The structural identity of the prepared system obtained from XRD pattern is further confirmed by Raman spectra measurements. Anatase has six Raman active modes. Band gap of the co-doped system was calculated using Kubelka-Munk equation and that was found to be lower than pure TiO2. Stability of the prepared systems was understood from thermo gravimetric analysis. FT-IR was performed to understand the functional groups as well as to study the surface changes occurred during modification. EDX was used to determine the impurities present in the system. The EDX spectra of all the co-doped samples show signals directly related to the dopants. Spectra of all the co-doped systems contain O and Ti as the main components with low concentrations of doped elements. Morphologies of the prepared systems were obtained from SEM and TEM analysis. Average particle size of the systems was drawn from histogram data. Electronic structures of the samples were identified perfectly from XPS measurements. Chapter 4 describes the photocatalytic degradation of herbicides Atrazine and Metolachlor using metal, non-metal co-doped titania systems. The percentage of degradation was analyzed by HPLC technique. Parameters such as effect of different catalysts, effect of time, effect of catalysts amount and reusability studies were discussed. Chapter 5 deals with the photo-oxidation of some anthracene derivatives by co-doped catalytic systems. These anthracene derivatives come underthe category of polycyclic aromatic hydrocarbons (PAH). Due to the presence of stable benzene rings, most of the PAH show strong inhibition towards biological degradation and the common methods employed for their removal. According to environmental protection agency, most of the PAH are highly toxic in nature. TiO2 photochemistry has been extensively investigated as a method for the catalytic conversion of such organic compounds, highlighting the potential of thereof in the green chemistry. There are actually two methods for the removal of pollutants from the ecosystem. Complete mineralization is the one way to remove pollutants. Conversion of toxic compounds to another compound having toxicity less than the initial starting compound is the second way. Here in this chapter, we are concentrating on the second aspect. The catalysts used were Gd(1wt%)-N-Ti, Pd(1wt%)-N-Ti and Ag(1wt%)-N-Ti. Here we were very successfully converted all the PAH to anthraquinone, a compound having diverse applications in industrial as well as medical fields. Substitution of 10th position of desired PAH by phenyl ring reduces the feasibility of photo reaction and produced 9-hydroxy 9-phenyl anthrone (9H9PA) as an intermediate species. The products were separated and purified by column chromatography using 70:30 hexane/DCM mixtures as the mobile phase and the resultant products were characterized thoroughly by 1H NMR, IR spectroscopy and GCMS analysis. Chapter 6 elucidates the heterogeneous Suzuki coupling reaction by Cu/Pd bimetallic supported on TiO2. Sol-Gel followed by impregnation method was adopted for the synthesis of Cu/Pd-TiO2. The prepared system was characterized by XRD, TG-DTG, SEM, EDX, BET Surface area and XPS. The product was separated and purified by column chromatography using hexane as the mobile phase. Maximum isolated yield of biphenyl of around72% was obtained in DMF using Cu(2wt%)-Pd(4wt%)-Ti as the catalyst. In this reaction, effective solvent, base and catalyst were found to be DMF, K2CO3 and Cu(2wt%)-Pd(4wt%)-Ti respectively. Chapter 7 gives an idea about the photovoltaic (PV) applications of TiO2 based thin films. Due to energy crisis, the whole world is looking for a new sustainable energy source. Harnessing solar energy is one of the most promising ways to tackle this issue. The present dominant photovoltaic (PV) technologies are based on inorganic materials. But the high material, low power conversion efficiency and manufacturing cost limits its popularization. A lot of research has been conducted towards the development of low-cost PV technologies, of which organic photovoltaic (OPV) devices are one of the promising. Here two TiO2 thin films having different thickness were prepared by spin coating technique. The prepared films were characterized by XRD, AFM and conductivity measurements. The thickness of the films was measured by Stylus Profiler. This chapter mainly concentrated on the fabrication of an inverted hetero junction solar cell using conducting polymer MEH-PPV as photo active layer. Here TiO2 was used as the electron transport layer. Thin films of MEH-PPV were also prepared using spin coating technique. Two fullerene derivatives such as PCBM and ICBA were introduced into the device in order to improve the power conversion efficiency. Effective charge transfer between the conducting polymer and ICBA were understood from fluorescence quenching studies. The fabricated Inverted hetero junction exhibited maximum power conversion efficiency of 0.22% with ICBA as the acceptor molecule. Chapter 8 narrates the third order order nonlinear optical properties of bare and noble metal modified TiO2 thin films. Thin films were fabricatedby spray pyrolysis technique. Sol-Gel derived Ti[OCH(CH3)2]4 in CH3CH2OH/CH3COOH was used as the precursor for TiO2. The precursors used for Au, Ag and Pd were the aqueous solutions of HAuCl4, AgNO3 and Pd(NO3)2 respectively. The prepared films were characterized by XRD, SEM and EDX. The nonlinear optical properties of the prepared materials were investigated by Z-Scan technique comprising of Nd-YAG laser (532 nm,7 ns and10 Hz). The non-linear coefficients were obtained by fitting the experimental Z-Scan plot with the theoretical plots. Nonlinear absorption is a phenomenon defined as a nonlinear change (increase or decrease) in absorption with increasing of intensity. This can be mainly divided into two types: saturable absorption (SA) and reverse saturable absorption (RSA). Depending on the pump intensity and on the absorption cross- section at the excitation wavelength, most molecules show non- linear absorption. With increasing intensity, if the excited states show saturation owing to their long lifetimes, the transmission will show SA characteristics. Here absorption decreases with increase of intensity. If, however, the excited state has strong absorption compared with that of the ground state, the transmission will show RSA characteristics. Here in our work most of the materials show SA behavior and some materials exhibited RSA behavior. Both these properties purely depend on the nature of the materials and alignment of energy states within them. Both these SA and RSA have got immense applications in electronic devices. The important results obtained from various studies are presented in chapter 9.
Resumo:
In recent years nonpolynomial finite element methods have received increasing attention for the efficient solution of wave problems. As with their close cousin the method of particular solutions, high efficiency comes from using solutions to the Helmholtz equation as basis functions. We present and analyze such a method for the scattering of two-dimensional scalar waves from a polygonal domain that achieves exponential convergence purely by increasing the number of basis functions in each element. Key ingredients are the use of basis functions that capture the singularities at corners and the representation of the scattered field towards infinity by a combination of fundamental solutions. The solution is obtained by minimizing a least-squares functional, which we discretize in such a way that a matrix least-squares problem is obtained. We give computable exponential bounds on the rate of convergence of the least-squares functional that are in very good agreement with the observed numerical convergence. Challenging numerical examples, including a nonconvex polygon with several corner singularities, and a cavity domain, are solved to around 10 digits of accuracy with a few seconds of CPU time. The examples are implemented concisely with MPSpack, a MATLAB toolbox for wave computations with nonpolynomial basis functions, developed by the authors. A code example is included.
Resumo:
Following criticism that, in business and management, metaphor is largely verbal and primarily used to convey similarity, this paper explores how visual metaphors can communicate the anomalous and the paradoxical aspects of KM more concisely than words, whilst simultaneously presenting more tacit associations to stimulate creative thinking. It considers a series of 30 assessed posters that aimed to re-present six basic KM paradoxes through imagery that captures both the analogous and the anomalous. We found six categories of radial metaphors able to convey paradoxical complexity in a concise way. This has implications for organizations thinking about how to engage people with both the familiar and the strange. Copyright © 2011 John Wiley & Sons, Ltd.
Resumo:
Includes bibliography
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)