998 resultados para Complexos de níquel
Resumo:
O trabalho apresentado nesta dissertação centrou-se na síntese e caracterização de novos precursores de ligandos do tipo iminopirrolilo, usando como molécula de partida a 2-fenil-1-pirrolina. Estes ligandos foram posteriormente usados em tentativas de síntese de complexos de Ni(II). Em termos experimentais, este trabalho foi iniciado pelo estudo da síntese do 2- fenilpirrole a partir da 2-fenil-1-pirrolina, na tentativa de obter um produto puro, através de um processo competitivo em termos de eficiência e custo em relação aos descritos anteriormente pelo grupo de trabalho e pela literatura. Numa segunda fase, estudou-se a síntese de dois novos precursores de ligandos iminopirrolilo e, por fim, tentou-se sintetizar dois novos complexos de Ni(II) com base nos referidos ligandos, com vista ao seu uso como catalisadores de polimerização de olefinas. O Capítulo 1 apresenta uma introdução ao desenvolvimento dos complexos de metais de transição como catalisadores de polimerização de olefinas, dando-se ênfase especial aos catalisadores de níquel contendo ligandos α-diimina, fenoxi-imina, anilitropona e iminopirrolilo. Focam-se ainda os métodos de síntese de pirroles substituídos na posição 2, devido à importância que apresentam para os objectivos deste trabalho. No Capítulo 2 estuda-se a reacção de desidrogenação catalítica de 2-fenil-1-pirrolina a 2-fenilpirrole, catalisada por paládio suportado em carvão ou alumina activados. Posteriormente descreve-se a reacção de formilação do 2-fenilpirrole que origina o novo composto 5-fenil-2-formilpirrole. Este é transformado em novos precursores de ligando do tipo iminopirrolilo, mais especificamente 2-arilimino-5-fenilpirrolilo, por condensação com a dimetil- e diisopropilanilina. No Capítulo 3 discute-se as tentativas de síntese de novos complexos de Ni(II) contendo os ligandos iminopirrolilo sintetizados, a partir da reacção dos correspondentes sais de sódio com o complexo [NiCl(Ph)(PPh3)2]. O Capítulo 4 apresenta as conclusões gerais e o Capítulo 5 os detalhes experimentais, as sínteses e as caracterizações dos ligandos e dos complexos.
Resumo:
Neste trabalho são descritos estudos comparativos de reações de oligomerização do etileno utilizando complexos do tipo: Ni-[P^O] e Ni-[Diimina] (na presença de MAO como cocatalisador). A pesquisa foi realizada com o objetivo de verificar e comparar o comportamento dos dois complexos em estudo, quando estes passam do meio homogêneo para o meio bifásico (na presença de um líquido iônico). O líquido iônico utilizado é o tetrafluorborato de 1-butil-3-metilimidazol. Foram avaliados parâmetros reacionais como pressão, temperatura, tempo de reação, velocidade de agitação e volume de líquido iônico para o catalisador Ni-[P^O] nos meios homogêneo e bifásico. Para o precursor Ni-[Diimina], os parâmetros avaliados foram pressão e temperatura nos dois meios. Os produtos obtidos são olefinas lineares e ramificadas, principalmente α-olefinas; com faixa de distribuição de C4 a C20 (Distribuição Shulz-Flowry). As atividades obtidas nos ciclos de reações variam entre 21 h-1 a 32.772 h-1, e os resultados são interpretados envolvendo os mecanismos de reação. Devido as diferenças existentes entre nos complexos em estudo, verifica-se diferentes atividades e diferentes faixas de produtos oligoméricos. O comportamento obtido para cada complexo depende diretamente dos parâmetros reacionais utilizados, além do meio ao qual foram submetidos durante as reações.
Resumo:
Polarizabilidades eletrônicas foram determinadas para o sal de tifluorometanosulfonato de níquel e para o complexo com imidazol, em soluções de metanol e de acetonitrila. A partir dos espectros eletrônicos, registrados numa concentração de 10-3 mol L-1 e pelo uso de um programa SIMP2FOS para o cálculo da força do oscilador experimental e POLAZ-F para o cálculo das polarizabilidades eletrônicas, foi possível perceber a distinta influência dos solventes na deformação da nuvem eletrônica do níquel (II).
Resumo:
The complex of Brookhart Ni(α-diimine)Cl2 (1) (α-diimine = 1,4-bis(2,6- diisopropylphenyl)-acenaphthenediimine) has been characterized after impregnation on silica (S1) and MAO-modified silicas (4.0, 8.0 and 23.0 wts.% Al/SiO2 called S2, S3 and S4, respectively). The treatment of these heterogeneous systems with MAO produces some active catalysts for the polymerization of the ethylene. A high catalytic activity has been gotten while using the system supported 1/S3 (196 kg of PE/mol[Ni].h.atm; toluene, Al/Ni = 1000, 30ºC, 60 min and atmospheric pressure of ethylene). The effects of polymerization conditions have been tested with the catalyst supported in S2 and the best catalytic activity has been gotten with solvent hexane, MAO as cocatalyst, molar ratio Al/Ni of 1000 and to the temperature of 30°C (285 kg of PE/mol[Ni].h.atm). When the reaction has been driven according to the in situ methodology, the activity practically doubled and polymers showed some similar properties. Polymers products by the supported catalysts showed the absence of melting fusion, results similar to those gotten with the homogeneous systems by DSC analysis. But then, polymers gotten with the transplanted system present according to the GPC’s curves the polydispersity (MwD) varies between 1.7 and 7.0. A polyethylene blend (BPE/LPE) was prepared using the complex Ni(α-diimine)Cl2 (1) (α-diimine = 1,4-bis(2,6-diisopropylphenyl)-acenaphthenediimine) and {TpMs*}TiCl3 (2) (TpMs* = hydridobis(3-mesitylpyrazol-1-yl)(5-mesitylpyrazol-1-yl)) supported in situ on MAO-modified silica (4.0 wts. -% Al/SiO2, S2). Reactions of polymerization of ethylene have been executed in the toluene in two different temperatures (0 and 30°C), varying the molars fraction of nickel (xNi), and using MAO as external cocatalyst. To all temperatures, the activities show a linear variation tendency with xNi and indicate the absence of the effect synergic between the species of nickel and the titanium. The maximum of activity have been found at 0°C. The melting temperature for the blends of polyethylene produced at 0 °C decrease whereas xNi increases indicating a good compatibility between phases of the polyethylene gotten with the two catalysts. The melting temperature for the blends of polyethylene showed be depend on the order according to which catalysts have been supported on the MAO-modified silica. The initial immobilization of 1 on the support (2/1/S2) product of polymers with a melting temperature (Tm) lower to the one of the polymer gotten when the titanium has been supported inicially (1/2/S2). The observation of polyethylenes gotten with the two systems (2/1/S2 and 1/2/S2) by scanning electron microscopy (SEM) showed the spherical polymer formation showing that the spherical morphology of the support to been reproduced. Are described the synthesis, the characterization and the catalytic properties for the oligomerization of the ethylene of four organometallics compounds of CrIII with ligands ([bis[2-(3,5-dimethyl-1-pyrazolyl)ethyl]amine] chromium (III) chloride (3a), [bis[2-(3,5- dimethyl-l-pyrazolyl)ethyl]benzylamine] chromium (III) chloride (3b), [bis[2-(3,5-dimethyl-lpyrazolyl) ethyl]ether] chromiun(III)chloride (3c), [bis[2-(3-phenyl-lpyrazolyl) ethyl]ether]chromiun(III)chloride (3d)). In relation of the oligomerization, at exception made of the compounds 3a, all complex of the chromium showed be active after activation with MAO and the TOF gotten have one effect differentiated to those formed with CrCl3(thf)3. The coordination of a tridentate ligand on the metallic center doesn't provoke any considerable changes on the formation of the C4 and C6, but the amount of C8 are decrease and the C10 and C12+ have increased. The Polymers produced by the catalyst 3a to 3 and 20 bar of ethylene have, according to analyses by DSC, the temperatures of fusion of 133,8 and 136ºC respectively. It indicates that in the two cases the production of high density polyethylene. The molar mass, gotten by GPC, is 46647 g/mols with MwD = 2,4 (3 bar). The system 3c/MAO showed values of TOF, activity and selectivity to different α-olefins according to the pressure of ethylene uses. Himself that shown a big sensibility to the concentration of ethylene solubilized.
Resumo:
This work involved the synthesis, characterization and proposing the molecular structure of coordination compounds involving ligands pyrazine-2-carboxamide (PZA) and 4- hydrazide acidic pyridine carboxylic (INH) and metals of the first transition series (M = Co2+, Ni2+ and Cu2+). For the characterization of the compounds used were analytical techniques such as infrared absorption spectroscopy average (FT-IR) molar conductivity measurements, CHN elemental analysis, EDTA Complexometric, measurement of melting point, X-ray diffraction by powder method, Thermogravimetry (TG) and Differential Thermal Analysis (DTA) and Simultaneous Differential Scanning Calorimetry (DSC). The absorption spectra in the infrared region suggested that the ligand coordination to the metal center occurs through the carbonyl oxygen atom and nitrogen alpha pyrazine ring to those complexes formed with PZA. For INH complexes with metal-ligand coordination is through the carbonyl oxygen and nitrogen of the terminal hydrazide grouping. The conductivity measurements of the complexes in aqueous solution they suggest to all behavior of the type 1:2 electrolytes, and conduct of non-electrolytes in acetonitrile. The results obtained by CHN elemental analysis and EDTA Complexometric allowed to infer the stoichiometry of the compounds synthesized. For all of the complexes obtained was possible to record the melting points, neither of which melted near the melting temperature of the free ligands. The X-ray diffraction showed that the complexes of pyrazinamide exhibited diffraction lines, suggesting that these compounds are crystalline, while compounds of isoniazid, with the exception of cobalt, exhibited diffraction lines, indicating that they are crystalline. The results from the TG-DTA and DSC allowed information regarding the dehydration and thermal decomposition of these complexes
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The Mangabal Sul and Mangabal Norte mafic-ultramafic complexes are interpreted as intrusive stratiform bodies in the Goiás Magmatic Arc during the Brazilian cycle, being economically important for harboring significant amounts of nickel and copper sulfides. The main lithotypes of the complexes are gabbronorites, olivine gabbronorites, pyroxenites and peridotites, with variated degrees of deformation, recrystallization and metamorphism superimposed, with metamorphic peak of amphibolite to granulite facies evidenced mainly by the occurrence of coronitic olivine in metamafic rocks and the occurrence of syn-kinematic retrometamorphism associated with the development of the main foliation Sn. The Sn foliation planes show NE-SW preferential direction, consistent with the foliation direction of VIII the enclosing gneisses and schists, also concordant with the general elongation of mafic and ultramafic bodies displayed on map. The sulfide phase presents textures that indicate remobilization, associated with the occurrence of significant amounts of rutile within the ore which reinforces this idea. Along with the sulfides, the occurrence of expressive quantities of titanium oxides such as ilmenite and rutile, make the area more economically attractive. It can be suggested that the Mangabal Norte and Mangabal Sul complexes are contemporary, have the same genetic affinity and suffered the same deformational and metamorphic processes, evidenced by their structural and petrological similarities
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
This work aimed to promote the synthesis, characterization and propose a plausible molecular structure for coordination compounds involving furosemide (4-Chloro-2-(2- furylmethylamino)-5-sulfamoyl-benzoic acid) with the metal ions Ni+2, Zn+2 and Co+2. The compounds were obtained in methanoic medium by evaporation of the solvent after the synthesis procedure. For characterization of coordination compounds determining the levels of metals by EDTA complexometry, infrared spectroscopy (FTIR), solubility of compounds in various solvents, thermogravimetry (TG), differential scanning calorimetry (DSC), differential thermal analysis were made (DTA), determination of the carbon , hydrogen and nitrogen (CHN). The results of infrared spectroscopy in the region suggest that the organic ligand is coordinated in a bidentate fashion to the metal ions, the metal center interactions to occur by the coordination of the nitrogen atom of the amino group and the oxygen atom of the carboxylic acid of the structure of furosemide. With the results of the levels of metal, elemental analysis (CHN) and thermal analysis has been possible to propose the structure of the ligand. The values of the molar conductivity of the complex in acetonitrile behavior suggest the non acetonitrile electrolyte solution. With the solubility tests it was found that the compounds have high solubility in methanol and acetonitrile, as are partially insoluble in water. From the results of thermal analysis (TG, DSC, DTA), it was possible to obtain the thermal behavior of the compounds as stages of dehydration, thermal stability, decomposition and the energies involved.
Resumo:
Universidade Estadual de Campinas . Faculdade de Educação Física
Resumo:
The [RuCl(bipy)(dppb)(4-pic)]PF6 complex was prepared and fully characterized. The X-ray crystal structure of this complex was determined in order to make an unambiguous distinction between the two possible positions of the 4-methylpyridine ligand (4-pic) in the compound: trans to phosphorus atom or trans to nitrogen atom. The [RuCl(bipy)(dppb)(4-pic)]PF6 complex exhibits an unusual temperature-dependent accidental degeneracy of the 31P chemical shifts in its solution NMR spectrum.
Resumo:
The present review paper describes the main features of nickel hydroxide modified electrodes covering its structural and electrochemical behavior and the newest advances promoted by nanostructured architectures. Important aspects such as synthetic procedures and characterization techniques such as X-Ray diffraction, Raman and Infrared spectroscopy, Electronic Microscopy and many others are detailed herein. The most important aspect concerning nickel hydroxide is related to its great versatility covering different fields in electrochemical-based devices such as batteries, electrocatalytic systems and electrochromic electrodes, the fundamental issues of these devices are also commented. Finally, some of the newest advances achieved in each field by the incorporation of nanomaterials will be shown.