Color to Gray: Visual Cue Preservation

Both commercial and scientific applications often need to transform color images into gray-scale images, e. g., to reduce the publication cost in printing color images or to help color blind people see visual cues of color images. However, conventional color to gray algorithms are not ready for practical applications because they encounter the following problems: 1) Visual cues are not well defined so it is unclear how to preserve important cues in the transformed gray-scale images; 2) some algorithms have extremely high time cost for computation; and 3) some require human-computer interactions to have a reasonable transformation. To solve or at least reduce these problems, we propose a new algorithm based on a probabilistic graphical model with the assumption that the image is defined over a Markov random field. Thus, color to gray procedure can be regarded as a labeling process to preserve the newly well-defined visual cues of a color image in the transformed gray-scale image. Visual cues are measurements that can be extracted from a color image by a perceiver. They indicate the state of some properties of the image that the perceiver is interested in perceiving. Different people may perceive different cues from the same color image and three cues are defined in this paper, namely, color spatial consistency, image structure information, and color channel perception priority. We cast color to gray as a visual cue preservation procedure based on a probabilistic graphical model and optimize the model based on an integral minimization problem. We apply the new algorithm to both natural color images and artificial pictures, and demonstrate that the proposed approach outperforms representative conventional algorithms in terms of effectiveness and efficiency. In addition, it requires no human-computer interactions.

Predator-induced stress makes the pesticide carbaryl more deadly to gray treefrog tadpoles (Hyla versicolor)

Global declines in amphibians likely have multiple causes, including widespread pesticide use. Our knowledge of pesticide effects on amphibians is largely limited to short-term (4-d) toxicity tests conducted under highly artificial conditions to determine lethal concentrations (LC50). We found that if we used slightly longer exposure times (10–16 d), low concentrations of the pesticide carbaryl (3–4% of LC504-d) killed 10–60% of gray treefrog (Hyla versicolor) tadpoles. If predatory cues also were present, the pesticide became 2–4 times more lethal, killing 60–98% of tadpoles. Thus, under more realistic conditions of increased exposure times and predatory stress, current application rates for carbaryl can potentially devastate gray treefrog populations. Further, because predator-induced stress is ubiquitous in animals and carbaryl's mode of action is common to many pesticides, these negative impacts may be widespread in nature.

Adding Color to Feminism: White Privilege Within the Women's Liberation Movement.

This paper will explore how white privilege has been intertwined with the women's liberation movement in the United States. Feminism and its goals are described briefly and linked to an evaluation of white privilege within the movement. The feminist movement is explored throughout its three waves, including a class and race analysis of each separate period. In addition, this analysis focuses on how Black and Chicana women have been excluded from the mainstream, White, middle-class movement. Through the use of Social Dominance Theory (Sidanius & Pratto, 1999), the prevalence and impact of oppression and hierarchy are explored. The implications of oppression and exclusion in the current political climate are followed by suggestions for aligning the goals and direction of feminism with social justice.

Biographical sketches and interesting anecdotes of persons of color to which is added a selection of pieces in poetry /

Mode of access: Internet.

The musci & hepaticae of the northern United States, (from New England to Pennsylvania and Wisconsin) contributed to Gray's Manual of the botany of the northern United States,

Mode of access: Internet.

Capturing natural-colour 3D models of insects for species discovery and diagnostics

Collections of biological specimens are fundamental to scientific understanding and characterization of natural diversity - past, present and future. This paper presents a system for liberating useful information from physical collections by bringing specimens into the digital domain so they can be more readily shared, analyzed, annotated and compared. It focuses on insects and is strongly motivated by the desire to accelerate and augment current practices in insect taxonomy which predominantly use text, 2D diagrams and images to describe and characterize species. While these traditional kinds of descriptions are informative and useful, they cannot cover insect specimens "from all angles" and precious specimens are still exchanged between researchers and collections for this reason. Furthermore, insects can be complex in structure and pose many challenges to computer vision systems. We present a new prototype for a practical, cost-effective system of off-the-shelf components to acquire natural-colour 3D models of insects from around 3 mm to 30 mm in length. ("Natural-colour" is used to contrast with "false-colour", i.e., colour generated from, or applied to, gray-scale data post-acquisition.) Colour images are captured from different angles and focal depths using a digital single lens reflex (DSLR) camera rig and two-axis turntable. These 2D images are processed into 3D reconstructions using software based on a visual hull algorithm. The resulting models are compact (around 10 megabytes), afford excellent optical resolution, and can be readily embedded into documents and web pages, as well as viewed on mobile devices. The system is portable, safe, relatively affordable, and complements the sort of volumetric data that can be acquired by computed tomography. This system provides a new way to augment the description and documentation of insect species holotypes, reducing the need to handle or ship specimens. It opens up new opportunities to collect data for research, education, art, entertainment, biodiversity assessment and biosecurity control. © 2014 Nguyen et al.

Forty Years of Winter: Cetaceans Observed During the Southbound Migration of Gray Whales, Eschrichtius robustus, Near Granite Canyon, Central California

From December to February in most years from 1967 to 2007, observers counted gray whales, Eschrichtius robustus, from shore sites south of Carmel in central California. In addition to gray whales, other cetacean species were also recorded. These observations were summarized and compared among survey platforms and to ocean conditions. Eleven cetacean species were identified including eight odontocete species (killer whale, Orcinus orca; Pacific white-sided dolphin, Lagenorhynchus obliquidens; common dolphin, Delphinus spp.; bottlenose dolphin, Tursiops truncatus, northern right whale dolphin, Lissodelphis borealis; Risso’s dolphin, Grampus griseus; Dall’s porpoise, Phocoenoides dalli; and harbor porpoise, Phocoena phocoena) and three mysticete species (humpback whale, Megaptera novaeangliae; minke whale, Balaenoptera acutorostrata; and blue whale, Balaenoptera musculus). As expected, the detection of certain species among survey platforms (shore-based census watches, 25-power “Big Eye” binocular watches, and aerial surveys) was limited by species surfacing behavior and/or bathymetric preference. Comparisons among the shore-based census efforts showed a significant difference in sightings rates from 1967–84 (n = 14, mean = 0.11, SD = 0.11) to 1985–2007 (n = 11, mean = 1.48, SD = 0.47; t-Test: p < 0.001, df = 23). The warm period observed during the 1990’s may partially explain the increase in sighting rates and diversity of species observed at the census site compared to the much cooler temperatures of the 1970’s.

Síntese de pigmento cerâmico ferrita de cobalto utilizando planejamento experimental

Synthetic inorganic pigments are the most widely used in ceramic applications because they have excellent chemical and thermal stability and also, in general, a lower toxicity to man and to the environment. In the present work, the ceramic black pigment CoFe2O4 was synthesized by the polymerization Complex method (MPC) in order to form a material with good chemical homogeneity. Aiming to optimize the process of getting the pigment through the MPC was used a fractional factorial design 2(5-2), with resolution III. The factors studied in mathematical models were: citric acid concentration, the pyrolysis time, temperature, time and rate of calcination. The response surfaces using the software statistica 7.0. The powders were characterized by thermal analysis (TG/DSC), x-ray diffraction (XRD), scanning electron microscopy (SEM) and spectroscopy in the UV-visible. Based on the results, there was the formation of phase cobalt ferrite (CoFe2O4) with spinel structure. The color of the pigments obtained showed dark shades, from black to gray. The model chosen was appropriate since proved to be adjusted and predictive. Planning also showed that all factors were significant, with a confidence level of 95%

Digital monitoring of mycelium growth kinetics and vigor of shiitake (Lentinula edodes (Berk.) Pegler) on agar medium

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Verruciform xanthoma located in anterior gingival

Verruciform xanthoma (VX) is a relatively rare benign lesion and oral predominantly, which occasionally affects skin and genital mucosa. It appears as a papule or single plaque showing a verrucous or papillomatous aspect, with variable color from reddish pink to gray. In majority of oral cases, it affects gingiva and alveolar mucosa such a solitary lesion. Histopathological findings are foamy histiocytes within elongated dermal papillae. Treatment consists of conservative excision surgery and recurrence is rare. A clinical case is reported, located in anterior gingiva, showing good prognosis, without recurrence. There was no concomitant oral lesion associated. Local trauma was the only possibility suggested to be related to etiology. No relevant alterations in laboratory exams (hemogram, total cholesterol, HDL, LDL, VLDL, glycose and glycolized hemoglobin) were found. The origin of the lesion remains unclear and investigation for possible associations with other lesions that could present greater risk of carcinogenesis is required. © Medicina Oral S.L.

Assessing Commonality and Differentiation for Packaging-Family Planning with Application to Medication Labels

This thesis presents a metric for assessing the commonality and differentiation of packaging-family planning with application to medical labels along with supporting background research and findings. Consumable products such as medications rely on the package or label to represent the contents. Package confusion has been widely recognized as a major problem for both over-the-counter and pharmacy-dispensed medications with potentially lethal consequences. It is critical to identify a medication as a member of a product family and differentiate its contributing elements based on visual features on the package or label to avoid consumer confusion and reduce dispensing errors. Indices that indicate degrees of commonality and differentiation of features in consumer products such as batteries, light bulbs, handles, etc for platforms have been shown to benefit development of engineered product families [6]. It is possible to take a similar approach for visual features in packaging such as typography, shape/form, imagery and color to benefit packaging-family development. This thesis establishes a commonality differentiation index for prominence of visual features on over-the-counter and pharmacy-dispensed medications based on occurrence, size, and location of features. It provides a quantitative measure to assist package designers in evaluating alternatives to satisfy strategic goals and improve safety. The index is demonstrated with several medications that have been identified by the Institute for Safe Medication Practice as commonly confused.

Effectiveness of Colors used on Safety and Health Signs for Communicating Severity of Injury

Signs are used extensively in workplaces and on products to identify hazards and provide instructions for appropriate behavior. A fundamental element of these signs is the signal-word panel located at the top of the sign. The colors and words in this panel are intended to convey information about the hazard identified. One type of hazard information concerns the severity of injury/illness associated with the hazard. The standard of the American National Standards Institute (ANSI) for facility signs uses three severity categories: 1) death or serious injury, 2) minor or moderate injury, and 3) property damage. The standard specifies which signal-word panel format, including color, to use based in part on the severity category. The purpose of this study was to determine if college students associate color with severity. The sample population consisted of 59 students tested in nine small groups. Twelve signs were shown to them in random order. Five of the signs had a color for the background of the signal-word panel. The colors were red, orange, yellow, blue, and gray. The signal word was a nonsense word and the text panel contained repetitions of the letter x in sentence format. Subject rated their impressions of the colors using two ordered rating scales for severity. Results indicated that color had a highly significant effect on severity ratings. Median ratings were generally consistent with the ANSI standard, except for orange. Red rated highest on both scales. Blue and gray rated lowest. Yellow and orange were in between red and blue. According to the ANSI standard, orange should indicate the same severity as red. These results indicated that orange was associated with less severity than red. Apparently, the ANSI standard's use of orange to identify a hazard associated with death or a serious injury is questionable.

Implicit threat, self-regulatory resources, and cognitive performance

The color red has been considered to indicate threat in achievement contexts. Recent studies have used brief confrontations with red — either as the color or as the word red — to prime for implicit threat, and have found a related impairment of cognitive performance. In another line of research, it has been shown that initial self-regulatory efforts cause diminished investment of self-regulatory resources afterwards, leading to a relative shift from a controlled to an automatic mode of information processing. We assume that activation of implicit threat via the color or the word red impairs cognitive performance more strongly during automatic compared to controlled processing of information. To test this hypothesis, we manipulated undergraduates’ (n = 78) momentary processing mode (automatic vs. controlled) by an initial task that required either high or low self-regulatory effort. Afterwards, participants were briefly confronted with red or gray stimuli and were then asked to complete a standardized intelligence measure. As expected, confrontation with red, as opposed to gray, impaired intellectual performance when participants were in an automatic processing mode. In contrast, no color effect emerged when participants were in a relatively controlled processing mode. In a second study, we replicated this finding in a sample of secondary school students (n = 130), using the black-printed word red or gray to experimentally manipulate implicit threat. Among others, the present findings may help to explain occasional difficulties in replicating findings of priming research.