Feedlot performance, feed efficiency and carcass traits in Nellore cattle selected for postweaning weight

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Performance, carcass traits, meat quality and economic analysis of feedlot of young bulls fed oilseeds with and without supplementation of vitamin E

The objective of this research was to evaluate average daily gain (ADG), carcass traits, meat tenderness and profitability of keeping cattle fed different oilseeds and vitamin E in feedlot. A total of 40 Red Norte young bulls with initial average body weight of 339±15 kg were utilized. The experimental design was completely randomized in a 2 × 2 factorial arrangement. The experiment lasted 84 days and experimental diets presented soybeans or cottonseeds as lipid sources associated or not to daily supplementation of 2,500 UI vitamin E per animal. The concentrate:roughage ratio was 60:40. Diets had the same amount of nitrogen (13% CP) and ether extract (6.5%). The data were analyzed by means of statistical software SAS 9.1. Neither vitamin supplementation nor lipid source affected ADG. There was no interaction between lipid source and vitamin supplementation for the variables studied. The inclusion of cottonseed reduced the carcass yield. There was no effect of diets on hot and cold carcass weights or prime cuts. The inclusion of cottonseed reduced the backfat thickness. No effect of experimental diets on the rib-eye area was observed. There was no effect of lipid source or vitamin supplementation on meat tenderness, which was affected, however, by ageing time. Diets with soybeans presented higher cost per animal. The utilization of soybean implied reduction of the gross margin (R$ 59.17 and R$ 60.51 for diets based on soy with and without supplemental vitamin, respectively, vs. R$ 176.42 and R$ 131.79 for diets based on cottonseed). The utilization of cottonseed enables improvement of profitability of feedlot fattening, in spite of negatively affecting some carcass characteristics.

Influence of environmental temperature, dietary energy level and sex on performance and carcass characteristics of pigs

Pigs are quite sensitive to high environmental temperatures and the thermoregulation mechanisms represent great expenses in energy for heating loss, reducing animal well-being and production performance, and altering carcass quality. The aim of this study was to assess the effects of sex and dietary energy level in growing-finishing pigs submitted to characteristic seasonal variation of temperature in subtropical humid climate, and to propose a mathematical model to predict growth performance and carcass characteristics. Twenty-eight crossbred growing-finishing pigs were randomly allotted to twelve treatments, in a 2x2x3 factorial trial (2 sex; 2 environmental conditions, and 3 energy levels). Heat stress condition (climatic chamber) showed temperatures of 31 oC at 7:00 and 22 oC at 17:00 (maximum of 33 °C) and thermal comfort condition (stall) showed temperatures of 18 °C at 7:00 and 24 °C (maximum of 27 °C). Pigs were fed ad libitum with diets containing 12.2 (low), 13.6 (medium) and 15.0 (high) MJ ME/ kg DM. Voluntary feed intake, daily weight gain, and final body weight were higher (P<0.01) at thermal comfort condition and were influenced by sex (P<0.01) in growing pigs. Feed to gain ratio decreased as the energy level increased (P<0.01), with values of 2.67, 2.59, and 2.32 (12.2, 13.6, and 15.0 MJ ME/kg DM, respectively). There was energy level and sex interaction only for daily weight gain. Regarding finishing pigs, environmental conditions also showed effects (P<0.01) on voluntary feed intake, daily weight gain, and final body weight. Performance of pigs was better at thermal comfort condition. Feed to gain ratio values were 3.55, 3.42, and 2.95 for low, medium, and high energy level, respectively. Interactions between energy level and sex were observed for voluntary feed intake, daily weight gain, and final body weight (P<0.05). Carcass yield and quality were affected by environmental condition and dietary energy level. Both hot and cold carcass weight increased as energy of ration increased. Cold carcass weight increased by 1.142 kg/MJ EM whereas backfat thickness was up to 252 mm/MJ EM. Longissimus thoracis muscle thickness was around 16 mm smaller in pigs under heat stress, but lean content was 2.68% higher in those animals. Regression equations were proposed to predict the performance values in the different situations studied.

Performance, survivability and carcass traits of crossbred lambs from five paternal breeds with local hair breed Santa Inês ewes

The present study aimed to evaluate the performance, survivability and carcass traits of crossbred lambs. Data from 299 lambs born to 209 ewes were used. The dams were from a local hair breed (Santa Inês) and five breeds of sires were used: Dorper (DR), Ile de France (IF), Hampshire Down (HD), Texel (TX) and Santa Inês (SI). The lambs were weighed at birth, weaning and slaughter. Fasting body weight, skin thickness, hot and cold carcass weight, carcass yield and carcass length were measured at slaughter. Carcasses were separated into commercial cuts: neck, shoulder, rib, belly, loin and leg. Leg length and circumference were measured. Analyses of variances using MIXED procedure in SAS® were carried out for weights and carcass traits. Factor, discriminant and canonical analysis were carried out. Mortality data of animals from birth until slaughter was analyzed using logistic regression. The HD animals had the highest mortality rate. TX lambs had similar growth rate and survivability compared to DR and IF and had better carcass traits than these genetic groups. Therefore, this breed can be used as paternal breed to crossbreeding with Santa Inês dams. Santa Inês animals did not differ in growth from birth until slaughter compared to crossbred animals, which highlights the potential of this naturalized breed for meat production. Moreover, there is a great variability inside this breed for carcass and growth traits which may undergo great improvement through selection programs. © 2013 Elsevier B.V.

Genotype effect on carcass and meat quality of lambs finished in irrigated pastures in the semiarid Northeastern Brazil

The aim of this study was to compare four genetic groups of sheep on the carcass and meat quality traits. Thirty-three contemporary and unrelated male lambs, all of single birth were used in the experiment, being thirteen from the Santa Inês (SI) breed, seven from the Brazilian Somali breed (BS), six from the Morada Nova (MN) breed and seven from the ½ Dorper - ½ Morada Nova (F1) crossbreed. The genotypes SI, BS and F1 presented similar performances in relation to hot and cold carcass weights, which values were 10.76±0.53kg and 10.46±0.52kg for SI, 9.20±0.73kg and 8.99±0.71kg for BS, and 9.35±0.73kg and 9.13±0.71kg for F1, respectively. The BS had a better hot carcass yield (47.10±0.88%) and cold carcass yield (46.00±0.87%). Better carcass conformation was observed in SI and F1 (2.73±0.12 and 2.50±0.17, respectively) while the BS presented a better finishing (3.29±0.20). The average for the rib eye area (REA) was 9.94±0.49cm², 8.66±0.67cm², 7.18±0.72cm² and 9.8±0.67cm², and for the carcass compactness index (CCI) it was 0.17±0.01kg/cm, 0.17±0.01kg/cm, 0.11±0.01kg/cm and 0.16±0,01kg/cm, for SI, SB, MN and F1, respectively. There were no significant differences between SI, BS and F1 regarding REA and CCI. Although, in general, the MN presented a relatively lower performance than the other genotypes, this breed had similar carcass yields and fat thickness when compared to SI and F1 and similar conformation and REA in comparison to the BS. Regarding meat quality, no differences were observed between genotypes, except for redness and cooking losses. It is concluded that no one group had a higher or lower performance in all traits analyzed. Moreover, for the management conditions employed in this study, there was evidence of greater specialization in meat production for genotypes SI, BS and F1 when compared to MN, although there are no substantial differences between the four groups regarding meat quality.

Using Slaughter Weight to Predict Weight and Yield of Primal Cuts of Carcass from Buffaloes

The knowledge of the meat production from different buffalo breeds and their crossings in different feeding systems becomes necessary for the supply of subsidies to whole productive meat chain. Some quantitative carcass traits of Mediterranean buffaloes bulls, finished in feedlot, with initial age of fourteen months and 330 kg live weight, slaughtered with 450, 480, 510 and 540 kg, were evaluated. The diet contained 13% crude protein, 2.68 Mcal digestible energy/kg DM and a roughage : concentrate ratio of 25:75. Regression equations for prediction weight and yield of primal cuts of carcass as a function of slaughter weight were obtained. Carcass dressing percent increased as the slaughter weight increased (49.2; 49.5; 49.7; and 49.9%). The Pistola Style cut weight although increasing linearly in weight (108.2; 117.6; 124.0 and 130.7 kg) as the slaughter weight increased, declined linearly when expressed in relation to cold carcass weight (49.5; 49.0; 48.6 and 48.2%). In this experimental conditions Mediterranean young bulls slaughtered between 450 to 540 kg of live weight showed increasing yields of cold carcass, forequarter and thin flank.

Fatty acid profile, carcass and meat quality traits of young Nellore bulls fed crude glycerin replacing energy sources in the concentrate

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of scalding and dehairing of pig carcasses at abattoirs on the visibility of welfare-related lesions

There is increasing interest in developing abattoir-based welfare measures for pigs.The primary aim of this study was to determine the most appropriate place on theslaughter line to conduct assessments of welfare-related lesions, namely apparentaggression-related skin lesions (hereafter referred to as 'skin lesions'), loin bruising andapparent tail biting damage. The study also lent itself to an assessment of theprevalence of these lesions, and the extent to which they were linked with productionparameters. Finishing pigs processed at two abattoirs on the Island of Ireland (n =1950 in abattoir A, and n = 1939 in abattoir B) were used. Data were collected over 6days in each abattoir in July 2014. Lesion scoring took place at two points on theslaughter line: (1) at exsanguination (Slaughter Stage 1 [SS1]), and (2) followingscalding and dehairing of carcasses (Slaughter Stage 2 [SS2]). At both points, eachcarcass was assigned a skin and tail lesion score ranging from 0 (lesion absent) to 3 or4 (severe lesions), respectively. Loin bruising was recorded as present or absent.Differences in the percentage of pigs with observable lesions of each type werecompared between SS1 and SS2 using McNemar/McNemar-Bowker tests. Theassociations between each lesion type, and both cold carcass weight andcondemnations, were examined at batch level using Pearson's correlations. Batch wasdefined as the group of animals with a particular farm identification code on a givenday. The overall percentage of pigs with a visible skin lesion (i.e. score > 0) decreasedbetween SS1 and SS2 (P<0.001). However, the percentage of pigs with a severe skinlesion increased numerically from SS1 to SS2. The percentage of pigs with a visible taillesion and with loin bruising also increased between SS1 and SS2 (P<0.001). Therewas a positive correlation between the percentage of carcasses that were partiallycondemned, and the percentage of pigs with skin lesions, tail lesions and loin bruising(P<0.05). Additionally, as the batch-level frequency of each lesion type increased,average cold carcass weight decreased (P<0.001). These findings suggest that severeskin lesions, tail lesions and loin bruising are more visible on pig carcasses after theyhave been scalded and dehaired, and that this is when abattoir-based lesion scoringshould take place. The high prevalence of all three lesion types, and the links witheconomically important production parameters, suggests more research into identifying key risk factors is warranted.

Adding Value to the Meat of Spent Laying Hens Manufacturing Sausages with a Healthy Appeal

The aim of this study was to evaluate the viability of the use of spent laying hens` meat in the manufacturing of mortadella-type sausages with healthy appeal by using vegetable oil instead of animal fat. 120 Hy-line (R) layer hens were distributed in a completely randomized design into two treatments of six replicates with ten birds each. The treatments were birds from light Hy-line (R) W36 and semi-heavy Hy-line (R) Brown lines. Cold carcass, wing, breast and leg fillets yields were determined. Dry matter, protein, and lipid contents were determined in breast and leg fillets. The breast and legg fillets of three replicates per treatment were used to manufacture mortadella. After processing, sausages were evaluated for proximal composition, objective color, microbiological parameters, fatty acid profile and sensory acceptance. The meat of light and semi-heavy spent hens presented good yield and composition, allowing it to be used as raw material for the manufacture of processed products. Mortadellas were safe from microbiological point of view, and those made with semi-heavy hens fillets were redder and better accepted by consumers. Values for all sensory attributes were evaluated over score 5 (neither liked nor disliked). Both products presented high polyunsaturated fatty acid contents and good polyunsaturated to saturated fatty acid ratio. The excellent potential for the use of meat from spent layer hens of both varieties in the manufacturing of healthier mortadella-type sausage was demonstrated.

Relações planta-animal num sistema de integração lavoura-pecuária

Este trabalho buscou estudar um sistema de integração lavoura-pecuária com diferentes alturas de pastos, no período de inverno, e seus reflexos sobre a dinâmica da pastagem e o desempenho animal. O experimento foi conduzido em uma pastagem de aveia + azevém manejada sob diferentes intensidades de pastejo. O delineamento experimental foi de blocos ao acaso com quatro tratamentos (10, 20, 30 e 40 cm de altura de manejo) e três repetições. Utilizaramse terneiros de corte de cruzamento industrial com idade e peso médio inicial de 10 meses e 210 kg, respectivamente. O método de pastejo foi contínuo com lotação variável. A adubação de base foi de 400 kg/ha de superfosfato simples e de 90 kg/ha de N em cobertura. As alturas do pasto afetaram a massa de forragem (MF), onde para cada cm de aumento na altura acima de 10 cm, houve incremento na matéria seca da pastagem em cerca de 86 kg/ha de MS. O aumento no ganho médio diário (GMD) foi condicionado pelo incremento na qualidade e/ou na quantidade de forragem disponível, e o modelo de resposta do GMD em relação às alturas do pasto, resultou em valores de 0,73 e 1,14 kg/animal/dia nos tratamentos de maior e menor GMD, respectivamente, que foram de 10 cm e 30 cm de altura. No rendimento de carcaça não houve diferença (P>0,05) entre os tratamentos, uma vez que todos os valores ficaram em torno de 51%. Quanto ao peso de carcaça quente e fria, peso de costilhar, escore de condição corporal e grau de acabamento, observou-se comportamento muito similar à evolução do ganho médio diário dos animais.

Utilização de medidas biométricas para predizer características da carcaça de cabritos Saanen

Foram determinadas medidas biométricas de caprinos leiteiros com o objetivo de estimar equações que permitam predizer o peso e as características da carcaça de animais sob diferentes condições nutricionais. Realizou-se um experimento em duas fases, utilizando-se 27 cabritos machos da raça Saanen em cada uma, distribuídos nos tratamentos: alimentação à vontade, 30 e 60% de restrição. O peso vivo (PV) inicial foi de 5 kg na Fase 1 e 20 kg na Fase 2, abatendo-se os animais ao atingirem 20 e 35 kg de PV, respectivamente. Foram determinadas as medidas biométricas e avaliada a condição corporal no animal vivo e, após o abate e resfriamento de 24 horas, as medidas da carcaça. Estimaram-se o peso em jejum (PJ), o peso da carcaça fria (PCF) e a compacidade da carcaça, em função das medidas biométricas. O perímetro torácico e o comprimento corporal foram as medidas biométricas que apresentaram melhor ajuste para estimar o PJ, o PCF e a compacidade da carcaça e, por isso, são recomendados, por serem precisos, práticos e de fácil execução.

Efeito da restrição alimentar no desempenho produtivo e econômico de cabritos F1 Boer x Saanen

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito da restrição alimentar sobre algumas características de carcaça de cabritos F1 Boer X Saanen

Objetivou-se com este trabalho avaliar o efeito da restrição alimentar nas características de carcaça de cabritos F1 Boer x Saanen. Foram utilizados 21 cabritos, pesando 15 kg de PV, distribuídos em três tratamentos (0, 30 e 60% de restrição). O consumo dos animais do tratamento 0% de restrição determinavam o consumo dos animais dos tratamentos 30 e 60% de restrição. Quando os animais do nível de restrição 0% atingiam 25 kg, estes juntamente com seus pares foram submetidos a jejum de sólido de 24 h e de líquido de 16 h. O abate ocorreu mediante descarga elétrica, seguido de sangria e retirada dos órgãos. Os ganhos de peso foram de 211,03, 126,15 e 11,71g/dia; a eficiência alimentar de 0,20, 0,18 e de 0,03; os pesos de abate de 25,44, 20,91 e 15,82kg para os tratamentos 0, 30 e 60% de restrição, respectivamente. O rendimento de carcaça quente, de carcaça fria e biológico não foram influenciados pela restrição alimentar. Somente a proporção da paleta e a do lombo foram influenciados pela restrição alimentar, com aumento linear do rendimento da paleta e decréscimo linear do rendimento do lombo. Houve efeito da restrição na redução do rendimento de gordura e aumento da proporção de osso. A restrição alimentar em níveis moderados, permitiu a obtenção de carcaças de boa qualidade, com bom rendimento, elevada proporção de músculo e baixa participação de gordura e, dependendo da relação custo:benefício, pode tornar-se boa alternativa para o produtor.

Características quantitativas da carcaça de cordeiros deslanados Morada Nova em função da relação volumoso:concentrado na dieta

Com o objetivo de avaliar a influência da relação volumoso:concentrado sobre a composição tecidual e os rendimentos de carcaça e de cortes comerciais de cordeiros Morada Nova em confinamento, utilizaram-se 18 cordeiros com peso vivo (PV) inicial de 15 kg, distribuídos em seis grupos de três animais (um em cada dieta), de acordo com a relação volumoso(V):concentrado(C): 40:60, 55:45 e 70:30. Foram avaliados os pesos de corpo vazio (PCV), de carcaça quente (PCQ) e de carcaça fria (PCF), a partir dos quais foram calculados os rendimentos biológico (RB), de carcaça quente (RCQ) e de carcaça fria (RCF) e a perda de peso por resfriamento (PPR). A carcaça foi dividida em cinco cortes cárneos (perna, lombo, costelas, paleta e pescoço), os quais foram pesados para cálculo de seus rendimentos em relação ao peso da meia-carcaça. A perna foi dissecada em músculo, osso e gordura e os pesos desses tecidos foram expressos em peso absoluto e em porcentagem da perna. Calcularam-se as relações músculo:osso e músculo:gordura, o índice de musculosidade da perna (IMP) e a área de olho-de-lombo (AOL). O aumento de 30 para 60% de concentrado na dieta elevou os rendimentos de carcaça quente e carcaça fria, assim como o rendimento biológico. Os crescentes teores de concentrado na dieta não afetaram a porcentagem de músculo na perna, mas proporcionaram maior deposição de gordura e maior área de olho-de-lombo.

Carcaças e componentes não-carcaça de cordeiros terminados em pasto de azevém recebendo suplementação concentrada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)