Application of carbon composite adsorbents prepared from coffee waste and clay for the removal of reactive dyes from aqueous solutions

A novel carbon composite was prepared from a mixture of coffee waste and clay with inorganic:organic ratio of 1.3 (CC-1.3). The mixture was pyrolysed at 700 °C. Considering the application of this adsorbent for removal of anionic dyes, the CC-1.3 was treated with a 6 mol L^-1 HCl for 24 h to obtain ACC-1.3. Fourier transform infrared (FTIR), N₂ adsorption/desorption curves, scanning electron microscope (SEM) and powder X-ray diffractometry (XRD) were used for characterisation of CC-1.3 and ACC-1.3 carbon adsorbents. The adsorbents were effectively utilised for removal of reactive blue 19 (RB-19) and reactive violet 5 (RV-5) textile dyes from aqueous solutions. The maximum amounts of RB-19 dye adsorbed at 25 °C are 63.59 (CC-1.3) and 110.6 mg g^-1 (ACC-1.3), and 54.34 (CC-1.3) and 94.32 mg g^-1 (ACC-1.3) for RV-5 dye. Four simulated dye-house effluents were used to test the application of the adsorbents for treatment of effluents.

Production of biodiesel from the resources endogeneous of Timor Leste

Os biocombustíveis têm estado na linha da frente das políticas energéticas mundiais visto que as suas vantagens conseguem colmatar as incertezas e resolver alguns dos problemas associados aos combustíveis fósseis. O biodiesel tem provado ser um combustível muito fiável, alternativo ao petrodiesel. É uma mistura de ésteres alquílicos produzidos a partir de óleos vegetais e gorduras animais através de uma reacção de transesterificação. Como combustível, o biodiesel é economicamente viável, socialmente responsável, tecnicamente compatível e ambientalmente amigável. O principal desafio associado ao seu desenvolvimento tem a ver com a escolha de matéria-prima para a sua produção. Nos países do terceiro mundo, óleos alimentares são mais importantes para alimentar pessoas do que fazer funcionar carros. Esta tese tem como objectivos produzir/processar biodiesel a partir de recursos endógenos de Timor-Leste e medir/prever as propriedades termodinâmicas do biodiesel, a partir das dos esteres alquílicos. A síntese do biodiesel a partir dos óleos de Aleurites moluccana, Jatropha curcas e borras de café foram aqui estudados. As propriedades termodinâmicas como densidade, viscosidade, tensão superficial, volatilidade e velocidade do som também foram medidas e estimadas usando modelos preditivos disponíveis na literatura, incluindo as equações de estado CPA e soft-SAFT. Timor-Leste é um país muito rico em recursos naturais, mas a maioria da população ainda vive na pobreza e na privação de acesso a serviços básicos e condições de vida decentes. A exploração de petróleo e gás no mar de Timor tem sido controlado pelo Fundo Petrolífero. O país ainda carece de electricidade e combustíveis que são cruciais para materializar as políticas de redução da pobreza. Como solução, o governo timorense criou recentemente o Plano Estratégico de Desenvolvimento a 20 anos cujas prioridades incluem trazer o desenvolvimento do petróleo do mar para a costa sul de Timor-Leste e desenvolver as energias renováveis. É neste último contexto que o biodiesel se insere. O seu desenvolvimento no país poderá ser uma solução para o fornecimento de electricidade, a criação de empregos e sobretudo o combate contra a pobreza e a privação. Para ser usado como combustível, no entanto, o biodiesel deve possuir propriedades termodinâmicas coerentes com as especificadas nas normas da ASTM D6751 (nos Estados Unidos) ou EN 14214 (na Europa) para garantir uma adequada ignição, atomização e combustão do biodiesel no motor.

Desenvolvimento de materiais adsorventes de óleos a partir de resíduos do beneficiamento do café e sua aplicação na ração para aves

O objetivo deste trabalho foi modificar quimicamente resíduos do beneficiamento do café (pergaminho), visando a obtenção de um produto mais hidrofóbico, testá-lo quanto ao seu poder adsorvente de óleo e utilizá-lo em formulações de rações para aves. Os resíduos foram analisados quanto a sua composição química-bromatológica e, posteriormente, acetilados com anidrido acético usando diferentes concentrações de N-bromossuccinimida, a temperatura de 120°C por 4 horas. A análise dos resíduos indicou altos teores de fibras. A acetilação possibilitou ganho de massa em todas as amostras estudadas. Nos testes de adsorção de óleo verificou-se aumento significativo na retenção de óleo dos materiais modificados, comprovando a hidrofobização. O material acetilado e com certa quantidade de óleo adsorvida foi chamado de OSoL (óleo sólido) sendo avaliado o seu valor nutricional em rações para aves, substituindo o óleo de soja. Nos ensaios metabólicos adotou-se o método de alimentação forcada, sendo determinados os valores de energia metabolizável verdadeira, energia metabolizável verdadeira corrigida para nitrogênio, coeficiente de digestibilidade da matéria seca, coeficiente de digestibilidade da proteína bruta e coeficiente de metabolizibilidade da energia metabolizável. Os tratamentos mostraram-se semelhantes estatisticamente, sendo, portanto, viável a inclusão do OSoL nas rações animais.

Remoção de urânio em águas de drenagem ácida de minas por técnicas de biossorção

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Investigación sobre fermentaciones metánicas de desechos estacionales

En el campo agrícola se producen una serie de desechos orgánicos, que por un lado representan serios problemas de contaminación ambiental y por otro el desperdicio de valores energéticos importantes. Es decir una acción contraria a la sostenibilidad que debe buscarse en este siglo XXI. Entre estos productos agrícolas pueden citarse la pulpa de café, residuos herbáceos, bagazo de caña y la fracción insoluble de estiércol de ganado porcino conocida como cerdaza. Un problema añadido para dar solución adecuada es la disponibilidad de estos solo en cortas épocas del año. Todo lo anterior ha sido el origen de la presente investigación, para dar solución adecuada tanto en el aprovechamiento de biogás como en la reducción de la contaminación. La investigación descrita en este documento contempla el desarrollo de los siguientes aspectos: 1) Caracterización y problemática de cada uno de los productos señalados, 2) la solución al problema mediante el proceso de digestión anaerobia con fases separadas con el aprovechamiento del biogás generados y 3) recomendaciones para el arranque del proceso de digestión anaerobia y su mantenimiento en una alternancia de los productos citados. En la primera etapa de la fase experimental se estimó el rendimiento específico de metano para los diferentes sustratos, utilizando reactores batch configurados en una y dos fases concluyendo que la digestión anaerobia en dos fases presenta diferentes ventajas sobre la digestión monoetapa. En general se obtuvo un mayor rendimiento en la producción de metano, una reducción en los tiempos de retención, mayor eficiencia en la eliminación de los sólidos volátiles agregados, y una mayor estabilidad en el proceso reflejado en el mantenimiento de valores de pH en los rangos de operación recomendados. Seguidamente, al comparar dos procesos para la puesta en marcha de digestores metanogénicos operados en forma continua, se concluye que las variables determinantes en la estabilidad del sistema son la alcalinidad total presente en el digestor, el establecimiento de la población de microorganismos y la carga orgánica aplicada. Las dos primeras están determinadas por la calidad y proporción del inóculo suministrado al inicio del proceso. La alternación de sustratos suministrados al sistema de digestión en dos fases, permitió determinar el impacto sobre el desempeño del mismo, registrando una reducción en la producción de biogás, la riqueza de metano y la eficiencia de eliminación de sólidos volátiles durante los primeros días de operación luego del cambio de sustrato. Este periodo corresponde al proceso de aclimatación de los microorganismos el cual requirió de 20 días para asimilar los componentes del nuevo sustrato. Finalmente, entre los sustratos analizados, la menor carga orgánica de operación para mantener la operación del sistema en continuo corresponde a la pulpa de café con 0.1 kg SV/m3. La composición de este sustrato favorece la rápida acumulación de acidez volátil en el sistema, proporcionando una tendencia a la acidificación. Sin embargo, al controlar las cargas orgánicas volumétricas, el sistema permaneció operando sin necesidad de adición de alcalinizantes. La aplicación de los resultados de la presente investigación a la problemática de residuos de café es alentadora, comprobando que el sistema puede ser operado en continuo alternando residuos boreales y pulpa de café, ambos sustratos disponibles en las plantas de procesamiento de la cereza de café. ABSTRACT In the agricultural field there are series of organic wastes, which in one hand are the source of serious problems of environmental pollution and in the other, they represent a residue that could be used as a feedstock with significant energy values. These actions are contrary to efforts towards sustainability, which should be a priority in this century. Among agricultural residues with significant abundance, the coffee pulp, herbaceous waste, sugarcane bagasse and the insoluble fraction of pig manure can be mentioned. An added problem to the development of appropriate treatment systems, which provides a solution to the disposal of such wastes, is the limited availability of these feedstocks only in short seasons. These arguments have been the source of our research, in order to provide properly measures to biogas usage and pollution reduction. The research presented in this document includes the approaches to the following aspects. 1) Characterization and problems regarding the selected feedstocks 2) the solution to the problem by anaerobic digestion process with separate phases and 3) recommendations for starting the process of anaerobic digestion and its maintenance with alternation of the products listed For the first stage of the experimental phase, the specific methane yield of the selected feedstocks was estimated using batch reactors configured in one and two phases. It was concluded that two-phase anaerobic digestion offered distinct advantages over the single-stage digestion. In general a higher methane production yields, lower retention times, higher efficiency in volatile solids removal, and increased stability among the process were obtained. When comparing two processes for starting up methanogenic digesters, it is concluded that the variables that determine the stability of the system are the total alkalinity in the digester, the establishment of the population of microorganisms and the organic load. The first variables are influenced by the proportion and quality of the inoculum supplied at the beginning of the process. The alternation of substrates gave as a result a negative impact on system performance, recording a reduction on biogas production, the methane concentration and the efficiency of volatile solids removal. The situation was observed during the first days of operation after the change of feeding. This period corresponds to the process of acclimatization of the microorganisms which required 20 days to assimilate new substrate components. Finally, among substrates studied, the lowest organic load applied to maintain a continuous operation of the system, corresponds to the coffee pulp with 0.1 kg VS / m3. The composition of this substrate promotes a rapid accumulation of volatile acidity within the system, providing a tendency to acidification. However, by controlling organic loads, the operating system remained stable without addition of alkalizing components. The application of the results of this research to the problem of coffee waste is promising, proving that an anaerobic system can be operated continuously by alternating boreal waste and coffee pulp, both substrates available in coffee processing plants.

From coffee industry waste materials to skin-friendly products with improved skin fat levels

Spent coffee grounds (SCG), which are the residue obtained from the treatment of coffee with hot water or steam, can be used for industrial applications, due to the high content in lipids. The cosmetic products might be a suitable application for these types of residues because the barrier properties of the stratum corneum (SC) are largely dependent on the intactness of the lipid lamellae that surrounds the corneocytes. The purpose of this work was to assess the feasibility of using the lipid fraction of SCG extracted with supercritical carbon dioxide in the development of new cosmetic formulations with improved skin lipids (sebum) and hydration. The use of spent coffee lipid extract in cosmetic industry seems to be a suitable approach to recycle the wastes from coffee industry. Emulsion containing 10% of the lipid fraction of SCG (SpentCofOil cream) presented promising characteristics in the improvement of sebum skin levels with a good acceptance by consumers when compared to an emulsion containing 10% w/w of green coffee oil (GreenCofOil cream) and a placebo without coffee oil (NoCofOil cream). Practical applications: In this work, the authors develop and characterize a cream containing 10% of the lipid fraction of SCG extracted with supercritical carbon dioxide with improved skin lipids (sebum) and hydration. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Growth and reproduction of earthworm in organic waste mixtures and effects on chemical and microbial properties of vermicompost

There is a large demand for organic fertilizers in organic agriculture, but few options for different wastes have been studied. The aim of the present work was to evaluate the biological responses of earthworms Eisenia andrei Bouche in wastes composed of cattle manure, peanut husk and spent coffee grounds, as well as to analyze the effect of earthworms on the microbial density and chemical properties of the vermicompost. Four treatments were employed, H1: cattle manure (100%), H2: cattle manure (75%) + peanut husk (25%), H3: cattle manure (75%) + spent coffee grounds (25%), H4: cattle manure (50%) + spent coffee ground (25%) + peanut husk (25%), with six replicates in a completely randomized design. The addition of spent coffee grounds to the manure increased the total biomass and indicated a rising trend in the production of cocoons, while the peanut husk apparently did not affect these variables. The CFU of bacteria and fungi were affected by the treatments at the beginning and end of the experiment and by the earthworms during the waste transformation. The evaluated organic waste mixtures differently affected the growth and reproduction of earthworms and chemical and biological properties of humus.

Coffee processing residues as a soil potassium amendment

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sugars metabolism and ethanol production by different yeast strains from coffee industry wastes hydrolysates

Significant amounts of wastes are generated by the coffee industry, among of which, coffee silverskin (CS) and spent coffee grounds (SCG) are the most abundantly generated during the beans roasting and instant coffee preparation, respectively. This study evaluated the sugars metabolism and production of ethanol by three different yeast strains (Saccharomyces cerevisiae, Pichia stipitis and Kluyveromyces fragilis) when cultivated in sugar rich hydrolysates produced by acid hydrolysis of CS and SCG. S. cerevisiae provided the best ethanol production from SCG hydrolysate (11.7 g/l, 50.2% efficiency). On the other hand, insignificant (<= 1.0 g/l) ethanol production was obtained from CS hydrolysate, for all the evaluated yeast strains, probably due to the low sugars concentration present in this medium (approx. 22 g/l). It was concluded that it is possible to reuse SCG as raw material for ethanol production, which is of great interest for the production of this biofuel, as well as to add value to this agro-industrial waste. CS hydrolysate, in the way that is produced, was not a suitable fermentation medium for ethanol production; however, the hydrolysate concentration for the sugars content increase previous the use as fermentation medium could be an alternative to overcome this problem. (C) 2011 Elsevier Ltd. All rights reserved.

Feasibility studies on using microwave-heating techniques for recycling lead waste

Lead is present everywhere in the environment and has been defined as one of the greatest threats to the human health. In this paper, attempts have been made to study a way of recycling the lead produced from waste usage and disposed of in such a way as to avoid degrading the surrounding environment. In order to contain the waste, recycled asphalt material is mixed with the lead and then heated with microwave energy. This is an attempt to solidify and reduce the lead contaminants and use the final product as sub-base material in road pavement construction. The microwave heating of the specimens is carried out with 30%, 50%, 80% and 100% of power at 800W. The optimum power mode is used to compare with the conventional heating of asphalt with sulfur additive. The results are characterized by compact density, permeability, and subjected to toxicity test with regards to lead concentration. A mechanical test to evaluate the stability is also performed on the three methods of solidification and to prove that microwave zapping method allow to convert into an environmentally stable material for recycling without having to be deposited in a landfill site.

Final report : task 4 : waste minimisation in construction

The Regenerating Construction Project for the CRC for Construction Innovation aims to assist in the delivery of demonstrably superior ‘green’ buildings. Components of the project address eco-efficient redesign, achieving a smaller ecological footprint, enhancing indoor environment and minimising waste in design and construction. The refurbishment of Council House 1 for Melbourne City Council provides an opportunity to develop and demonstrate tools that will be of use for commercial building refurbishment generally. It is hoped that the refurbishment will act as an exemplar project to demonstrate environmentally friendly possibilities for office building refurbishment.

Waste minimisation in office refurbishment projects : an Australian perspective

The refurbishment of commercial buildings is growing as a percentage of overall construction activity in Australia and this trend is likely to continue. Refurbishment generates a significant waste stream much of which is potentially reusable or recyclable. Despite this potential, several factors are known to unnecessarily inhibit the amount of recycling that actually occurs on renovation projects. In order to identify the reasons causing this reluctance, a process of project monitoring and expert consultation was carried out. Twenty three experts experienced in commercial refurbishment projects and three waste contractors with specific knowledge of construction waste were interviewed. Records of receipts for waste from a case study project reveal three principal factors inhibiting recycling rates: the presence of asbestos in the building; the continued occupation of the building during construction; and the breaking up of a large project into small separate contracts thereby reducing economies of scale. To ascertain the potential for improvement, current rates for reuse and recycling of materials were collected from the experts. The results revealed a considerable variation in practice between companies and indicated key areas which should be targeted to improve performance.

The efficacy of waste management plans in Australian commercial construction refurbishment projects

Renovation and refurbishment of the existing commercial building stock is a growing area of total construction activity and a significant generator of waste sent to landfill in Australia. A written waste management plan (WMP) is a widespread regulatory requirement for commercial office redevelopment projects. There is little evidence, however, that WMPs actually increase the quantity of waste that is ultimately diverted from landfill. Some reports indicate an absence of any formal verification or monitoring process by regulators to assess the efficacy of the plans. In order to gauge the extent of the problem a survey was conducted of twenty four consultants and practitioners involved in commercial office building refurbishment projects to determine the state of current practice with regard to WMPs and to elicit suggestions with regard to ways of making the process more effective. Considerable variation in commitment to recycling policies was encountered indicating a need to revisit waste minimisation practices if the environmental performance of refurbishment projects is to be improved.