A spectral synthesis code for rapid modelling of supernovae

We present TARDIS-an open-source code for rapid spectral modelling of supernovae (SNe). Our goal is to develop a tool that is sufficiently fast to allow exploration of the complex parameter spaces of models for SN ejecta. This can be used to analyse the growing number of highquality SN spectra being obtained by transient surveys. The code uses Monte Carlo methods to obtain a self-consistent description of the plasma state and to compute a synthetic spectrum. It has a modular design to facilitate the implementation of a range of physical approximations that can be compared to assess both accuracy and computational expediency. This will allow users to choose a level of sophistication appropriate for their application. Here, we describe the operation of the code and make comparisons with alternative radiative transfer codes of differing levels of complexity (SYN++, PYTHON and ARTIS). We then explore the consequence of adopting simple prescriptions for the calculation of atomic excitation, focusing on four species of relevance to Type Ia SN spectra-Si II, SII, MgII and Ca II. We also investigate the influence of three methods for treating line interactions on our synthetic spectra and the need for accurate radiative rate estimates in our scheme.

Large eddy simulations for fan-OGV broadband noise prediction

The work in this paper forms part of a project on the use of large eddy simulation (LES) for broadband rotor-stator interaction noise prediction. Here we focus on LES of the flow field near a fan blade trailing edge. The first part of the paper aims to evaluate LES suitability for predicting the near-field velocity field for a blunt NACA-0012 airfoil at moderate Reynolds numbers (2× 10 5 and 4× 10 5). Preliminary computations of turbulent mean and root-mean-square velocities, as well as energy spectra at the trailing edge, are compared with those from a recent experiment.1 The second part of the paper describes preliminary progress on an LES calculation of the fan wakes on a fan rig. 2 The CFD code uses a mixed element unstructured mesh with a median dual control volume. A wall-adapting local eddy-viscosity sub-grid scale model is employed. A very small amount of numerical dissipation is added in the numerical scheme to keep the compressible solver stable. Further results for the fan turbulentmean and RMS velocity, and especially the aeroacoustics field will be presented at a later stage. Copyright © 2008 by Qinling LI, Nigel Peake & Mark Savill.

Desenvolvimento de um simulador numérico empregando o método Smoothed Particle Hydrodynamics para a resolução de escoamentos incompressíveis. Implementação computacional em paralelo (CUDA)

Neste trabalho, foi desenvolvido um simulador numérico baseado no método livre de malhas Smoothed Particle Hydrodynamics (SPH) para a resolução de escoamentos de fluidos newtonianos incompressíveis. Diferentemente da maioria das versões existentes deste método, o código numérico faz uso de uma técnica iterativa na determinação do campo de pressões. Este procedimento emprega a forma diferencial de uma equação de estado para um fluido compressível e a equação da continuidade a fim de que a correção da pressão seja determinada. Uma versão paralelizada do simulador numérico foi implementada usando a linguagem de programação C/C++ e a Compute Unified Device Architecture (CUDA) da NVIDIA Corporation. Foram simulados três problemas, o problema unidimensional do escoamento de Couette e os problemas bidimensionais do escoamento no interior de uma Cavidade (Shear Driven Cavity Problem) e da Quebra de Barragem (Dambreak).

A model to predict the life of pneumatic conveyor bends

A new approach to the prediction of bend lifetime in pneumatic conveyors, subject to erosive wear is described. Mathematical modelling is exploited. Commercial Computational Fluid Dynamics (CFD) software is used for the prediction of air flow and particle tracks, and custom code for the modelling of bend erosion and lifetime prediction. The custom code uses a toroidal geometry, and employs a range of empirical data rather than trying to fit classical erosion models to a particular circumstance. The data used was obtained relatively quickly and easily from a gas-blast erosion tester. A full-scale pneumatic conveying rig was used to validate a sample of the bend lifetime predictions, and the results suggest accuracy of within ±65%, using calibration methods. Finally, the work is distilled into user-friendly interactive software that will make erosion lifetime predictions for a wide range of bends under varying conveying conditions. This could be a valuable tool for the pneumatic conveyor design or maintenance engineer.

JCircus 2.0: Uma extensão da ferramenta de tradução de Circus para Java

This dissertation aims at extending the JCircus tool, a translator of formal specifications into code that receives a Circus specification as input, and translates the specification into Java code. Circus is a formal language whose syntax is based on Z s and CSP s syntax. JCircus generated code uses JCSP, which is a Java API that implements CSP primitives. As JCSP does not implement all CSP s primitives, the translation strategy from Circus to Java is not trivial. Some CSP primitives, like parallelism, external choice, communication and multi-synchronization are partially implemented. As an aditional scope, this dissertation will also develop a tool for testing JCSP programs, called JCSPUnit, which will also be included in JCircus new version. The extended version of JCircus will be called JCircus 2.0.

La planificación estática-la planificación dinámica : Ausencia de planes de ordenamiento territorial municipal

Mucho ofthe towns of Mendoza have been working for years with a methodology built with traditional zoningand code of permitted uses,not permitted or conditional. With these instrument sexpectthe presentation of private enter prisesto assess whether it complies with these regulationsto authorize the works.These agencies have a plan with zoning and code application shave already considered planning. This form of work, shows clearly the lack of actions to drive urban developmentsin the department, initiatives on the issue only limited to astatic situation, waiting for proposal sand external actions,not being able to see the advantagesand /or contribution saccom panying the Land Use Plan. Une of the important elements to considerin the Plan process, is the incorporation of participatory stage allows, consensus and guidanceto policy makers, community in territorial actions. For this way are designed and constructed public works, to address concerns of the population and in some cases,works that will produce community supportat election time. A look at the performance of Cities hall suchas Granada City Council, Churriana de la Vega and Jun, you can observe that the planning can be done other wise, as articulated action from the same organism. In principle determining zoning and uses of spaceis integral to the Land Use Planand that it further comprises the development proposals,the lines of action and prioritization of programs and projects. These local governants, which manage a municipality, working withdy namic planning councilasit implements the proposed urban development, agricultural, commercial and industrialin its territory and build public work saccording to plan. Since 2009,the province has a Law of Zoningand Land Use demanded Municipal Land Management Plans, but three years after the enactmentof the 18 only has aplan.Thisis due to two reasons:the policy makersdo not understand the multiplicity of elements and facets of a plan covering the other,the plans are perceived as a limitation on their actions , a fact not willing to accept. The dissemination of know ledge and the, new ways toaddress the Land Use Planning and management of conflicts generated by the unprecedented growthwith incompatible usesin these cities that the component swhich will requirel and manager stoimplement aplanning Plans. Tusa dinámica risión Fromm te municipalitos in thais contexto de can tal abur innovación and a newway of governing

La planificación estática-la planificación dinámica : Ausencia de planes de ordenamiento territorial municipal

Mucho ofthe towns of Mendoza have been working for years with a methodology built with traditional zoningand code of permitted uses,not permitted or conditional. With these instrument sexpectthe presentation of private enter prisesto assess whether it complies with these regulationsto authorize the works.These agencies have a plan with zoning and code application shave already considered planning. This form of work, shows clearly the lack of actions to drive urban developmentsin the department, initiatives on the issue only limited to astatic situation, waiting for proposal sand external actions,not being able to see the advantagesand /or contribution saccom panying the Land Use Plan. Une of the important elements to considerin the Plan process, is the incorporation of participatory stage allows, consensus and guidanceto policy makers, community in territorial actions. For this way are designed and constructed public works, to address concerns of the population and in some cases,works that will produce community supportat election time. A look at the performance of Cities hall suchas Granada City Council, Churriana de la Vega and Jun, you can observe that the planning can be done other wise, as articulated action from the same organism. In principle determining zoning and uses of spaceis integral to the Land Use Planand that it further comprises the development proposals,the lines of action and prioritization of programs and projects. These local governants, which manage a municipality, working withdy namic planning councilasit implements the proposed urban development, agricultural, commercial and industrialin its territory and build public work saccording to plan. Since 2009,the province has a Law of Zoningand Land Use demanded Municipal Land Management Plans, but three years after the enactmentof the 18 only has aplan.Thisis due to two reasons:the policy makersdo not understand the multiplicity of elements and facets of a plan covering the other,the plans are perceived as a limitation on their actions , a fact not willing to accept. The dissemination of know ledge and the, new ways toaddress the Land Use Planning and management of conflicts generated by the unprecedented growthwith incompatible usesin these cities that the component swhich will requirel and manager stoimplement aplanning Plans. Tusa dinámica risión Fromm te municipalitos in thais contexto de can tal abur innovación and a newway of governing

La planificación estática-la planificación dinámica : Ausencia de planes de ordenamiento territorial municipal

Mucho ofthe towns of Mendoza have been working for years with a methodology built with traditional zoningand code of permitted uses,not permitted or conditional. With these instrument sexpectthe presentation of private enter prisesto assess whether it complies with these regulationsto authorize the works.These agencies have a plan with zoning and code application shave already considered planning. This form of work, shows clearly the lack of actions to drive urban developmentsin the department, initiatives on the issue only limited to astatic situation, waiting for proposal sand external actions,not being able to see the advantagesand /or contribution saccom panying the Land Use Plan. Une of the important elements to considerin the Plan process, is the incorporation of participatory stage allows, consensus and guidanceto policy makers, community in territorial actions. For this way are designed and constructed public works, to address concerns of the population and in some cases,works that will produce community supportat election time. A look at the performance of Cities hall suchas Granada City Council, Churriana de la Vega and Jun, you can observe that the planning can be done other wise, as articulated action from the same organism. In principle determining zoning and uses of spaceis integral to the Land Use Planand that it further comprises the development proposals,the lines of action and prioritization of programs and projects. These local governants, which manage a municipality, working withdy namic planning councilasit implements the proposed urban development, agricultural, commercial and industrialin its territory and build public work saccording to plan. Since 2009,the province has a Law of Zoningand Land Use demanded Municipal Land Management Plans, but three years after the enactmentof the 18 only has aplan.Thisis due to two reasons:the policy makersdo not understand the multiplicity of elements and facets of a plan covering the other,the plans are perceived as a limitation on their actions , a fact not willing to accept. The dissemination of know ledge and the, new ways toaddress the Land Use Planning and management of conflicts generated by the unprecedented growthwith incompatible usesin these cities that the component swhich will requirel and manager stoimplement aplanning Plans. Tusa dinámica risión Fromm te municipalitos in thais contexto de can tal abur innovación and a newway of governing

PIC computation of electron current collection to a moving bare tether in the mesothermal condition

In tethered satellite technology, it is important to estimate how many electrons a spacecraft can collect from its ambient plasma by a bare electrodynamic tether. The analysis is however very difficult because of the small but significant Geo-magnetic field and the spacecraft’s relative motion to both ions and electrons. The object of our work is the development of a numerical method, for this purpose. Particle-In-Cell (PIC) method, for the calculation of electron current to a positive bare tether moving at orbital velocity in the ionosphere, i.e. in a flowing magnetized plasma under Maxwellian collisionless conditions. In a PIC code, a number of particles are distributed in phase space and the computational domain has a grid on which Poisson equation is solved for field quantities. The code uses the quasi-neutrality condition to solve for the local potential at points in the plasma which coincide with the computational outside boundary. The quasi-neutrality condition imposes ne - ni on the boundary. The Poisson equation is solved in such a way that the presheath region can be captured in the computation. Results show that the collected current is higher than the Orbital Motion Limit (OML) theory. The OML current is the upper limit of current collection under steady collisionless unmagnetized conditions. In this work, we focus on the flowing effects of plasma as a possible cause of the current enhancement. A deficit electron density due to the flowing effects has been worked and removed by introducing adiabatic electron trapping into our model.

Comparisons between analogue and numerical models of thrust wedge development

Analogue and finite element numerical models with frictional and viscous properties are used to model thrust wedge development. Comparison between model types yields valuable information about analogue model evolution, scaling laws and the relative strengths and limitations of the techniques. Both model types show a marked contrast in structural style between ‘frictional-viscous domains’ underlain by a thin viscous layer and purely ‘frictional domains’. Closely spaced thrusts form a narrow and highly asymmetric fold-and-thrust belt in the frictional domain, characterized by in-sequence propagation of forward thrusts. In contrast, the frictional-viscous domain shows a wide and low taper wedge and a thrust belt with a more symmetrical vergence, with both forward and back thrusts. The frictional-viscous domain numerical models show that the viscous layer initially simple shears as deformation propagates along it, while localized deformation resulting in the formation of a pop-up structure occurs in the overlying frictional layers. In both domains, thrust shear zones in the numerical model are generally steeper than the equivalent faults in the analogue model, because the finite element code uses a non-associated plasticity flow law. Nevertheless, the qualitative agreement between analogue and numerical models is encouraging. It shows that the continuum approximation used in numerical models can be used to model frictional materials, such as sand, provided caution is taken to properly scale the experiments, and some of the limitations are taken into account.

Ethical practice from the perspective of the forensic psychologist : commentary on the uses and value of the Australian Psychological Society (2007) code of ethics

Forensic practice in Australia and around the world attracts a high level of public and judicial scrutiny. The way in which the forensic psychologist conducts him or herself in ethically challenging situations is important not only to the reputation of the individual practitioner, but to the profession more widely. This paper outlines some of the ethical issues that commonly arise in forensic psychology practice and discusses these in relation to the recently published Australian Psychological Society (2007) Code of Ethics. Four ethically challenging scenarios are described and discussed in terms of how the Code might be used to offer guidance to psychologists about how they might best respond.

Visual code annotations for cyberphysical programming

User interfaces for source code editing are a crucial component in any software development environment, and in many editors visual annotations (overlaid on the textual source code) are used to provide important contextual information to the programmer. This paper focuses on the real-time programming activity of ‘cyberphysical’ programming, and considers the type of visual annotations which may be helpful in this programming context.

Source code watermarking based on function dependency oriented sequencing

In the current market, extensive software development is taking place and the software industry is thriving. Major software giants have stated source code theft as a major threat to revenues. By inserting an identity-establishing watermark in the source code, a company can prove it's ownership over the source code. In this paper, we propose a watermarking scheme for C/C++ source codes by exploiting the language restrictions. If a function calls another function, the latter needs to be defined in the code before the former, unless one uses function pre-declarations. We embed the watermark in the code by imposing an ordering on the mutually independent functions by introducing bogus dependency. Removal of dependency by the attacker to erase the watermark requires extensive manual intervention thereby making the attack infeasible. The scheme is also secure against subtractive and additive attacks. Using our watermarking scheme, an n-bit watermark can be embedded in a program having n independent functions. The scheme is implemented on several sample codes and performance changes are analyzed.

Technicolouring the fridge : reducing food waste through uses of colour-coding and cameras

Domestic food wastage is a growing problem for the environment and food security. Some causes of domestic food wastes are attributed to a consumer’s behaviours during food purchasing, storage and consumption, such as: excessive food purchases and stockpiling in storage. Recent efforts in human-computer interaction research have examined ways of influencing consumer behaviour. The outcomes have led to a number of interventions that assist users with performing everyday tasks. The Internet Fridge is an example of such an intervention. However, new pioneering technologies frequently confront barriers that restrict their future impact in the market place, which has prompted investigations into the effectiveness of behaviour changing interventions used to encourage more sustainable practices. In this paper, we investigate and compare the effectiveness of two interventions that encourage behaviour change: FridgeCam and the Colour Code Project. We use FridgeCam to examine how improving a consumer’s food supply knowledge can reduce food stockpiling. We use the Colour Code Project to examine how improving consumer awareness of food location can encourage consumption of forgotten foods. We explore opportunities to integrate these interventions into commercially available technologies, such as the Internet Fridge, to: (i) increase the technology’s benefit and value to users, and (ii) promote reduced domestic food wastage. We conclude that interventions improving consumer food supply and location knowledge can promote behaviours that reduce domestic food waste over a longer term. The implications of this research present new opportunities for existing and future technologies to play a key role in reducing domestic food waste.

Compiling Scientific Code Using Partial Evaluation

Scientists are faced with a dilemma: either they can write abstract programs that express their understanding of a problem, but which do not execute efficiently; or they can write programs that computers can execute efficiently, but which are difficult to write and difficult to understand. We have developed a compiler that uses partial evaluation and scheduling techniques to provide a solution to this dilemma.