On approximate electromagnetic cloaking by transformation media

We give a comprehensive study on regularized approximate electromagnetic cloaking in the spherical geometry via the transformation optics approach. The following aspects are investigated: (i) near-invisibility cloaking of passive media as well as active/radiating sources; (ii) the existence of cloak-busting inclusions without lossy medium lining; (iii) overcoming the cloaking-busts by employing a lossy layer outside the cloaked region; and (iv) the frequency dependence of the cloaking performances. We address these issues and connect the obtained asymptotic results to singular ideal cloaking. Numerical verifications and demonstrations are provided to show the sharpness of our analytical study.

EXPERIMENTAL AND COMPUTATIONAL STUDIES OF ELECTROMAGNETIC CLOAKING AT MICROWAVES

An invisibility cloak is a device that can hide the target by enclosing it from the incident radiation. This intriguing device has attracted a lot of attention since it was first implemented at a microwave frequency in 2006. However, the problems of existing cloak designs prevent them from being widely applied in practice. In this dissertation, we try to remove or alleviate the three constraints for practical applications imposed by loosy cloaking media, high implementation complexity, and small size of hidden objects compared to the incident wavelength. To facilitate cloaking design and experimental characterization, several devices and relevant techniques for measuring the complex permittivity of dielectric materials at microwave frequencies are developed. In particular, a unique parallel plate waveguide chamber has been set up to automatically map the electromagnetic (EM) field distribution for wave propagation through the resonator arrays and cloaking structures. The total scattering cross section of the cloaking structures was derived based on the measured scattering field by using this apparatus. To overcome the adverse effects of lossy cloaking media, microwave cloaks composed of identical dielectric resonators made of low loss ceramic materials are designed and implemented. The effective permeability dispersion was provided by tailoring dielectric resonator filling fractions. The cloak performances had been verified by full-wave simulation of true multi-resonator structures and experimental measurements of the fabricated prototypes. With the aim to reduce the implementation complexity caused by metamaterials employment for cloaking, we proposed to design 2-D cylindrical cloaks and 3-D spherical cloaks by using multi-layer ordinary dielectric material (εr>1) coating. Genetic algorithm was employed to optimize the dielectric profiles of the cloaking shells to provide the minimum scattering cross sections of the cloaked targets. The designed cloaks can be easily scaled to various operating frequencies. The simulation results show that the multi-layer cylindrical cloak essentially outperforms the similarly sized metamaterials-based cloak designed by using the transformation optics-based reduced parameters. For the designed spherical cloak, the simulated scattering pattern shows that the total scattering cross section is greatly reduced. In addition, the scattering in specific directions could be significantly reduced. It is shown that the cloaking efficiency for larger targets could be improved by employing lossy materials in the shell. At last, we propose to hide a target inside a waveguide structure filled with only epsilon near zero materials, which are easy to implement in practice. The cloaking efficiency of this method, which was found to increase for large targets, has been confirmed both theoretically and by simulations.

Processos de regulação da violência escolar: das políticas às práticas

Esta comunicação tem como objetivo analisar como as políticas respeitantes à segurança escolar são reinterpretadas e reorientadas em resultado das estratégias e filosofias de intervenção das direções das escolas e outros agentes educativos. Tendo como premissa que o contexto social não determina linearmente a violência escolar, o estudo centrou-­se na análise das relações entre o contexto social local e organizacional das escolas, procurando identificar os factores relevantes para o processo de regulação da violência. Foram selecionados três clusters de escolas na Área Metropolitana de Lisboa, tendo em conta contrastes intra e inter clusters assim como a sua posição relativa face aos níveis de violência registadas a nível nacional. Foi identificada uma diversidade significativa de respostas à violência, concretizadas na mobilização de diferentes recursos pelos responsáveis das escolas com o duplo objetivo de atingir as metas políticas definidas e os seus próprios interesses estratégicos. Esta apropriação e reorientação das políticas realiza-­se através da estruturação de redes locais de poder, hierarquizando competências e responsabilidades, e no processo, redefinindo os objetivos do processo de prevenção e intervenção. A ocultação das situações de violência, o recrutamento preferencial de estudantes de classe média ou com sucesso educativo elevado, ou ainda as sanções desproporcionais para alunos agressores ou indisciplinados, foram algumas das estratégias identificadas. Isto mostra que os atores têm diferentes possibilidades e capacidades de ação num sistema complexo de regras sociais que, dentro de certos limites, lhes permite reinterpretar e reconstruir regras e, em última instância, contribuir para a alteração do próprio sistema (Mouzelis, 2000;; Burns e Flam, 2000;; Lipsky, 1980).

Virtual reshaping and invisibility in obstacle scattering

We consider reshaping an obstacle virtually by using transformation optics in acoustic and electromagnetic scattering. Among the general virtual reshaping results, the virtual minification and virtual magnification in particular are studied. Stability estimates are derived for scattering amplitude in terms of the diameter of a small obstacle, which implies that the limiting case for minification corresponds to a perfect cloaking, i.e., the obstacle is invisible to detection.

Interferometric technique for measuring terahertz antenna phase patterns

A quasi-optical interferometric technique capable of measuring antenna phase patterns without the need for a heterodyne receiver is presented. It is particularly suited to the characterization of terahertz antennas feeding power detectors or mixers employing quasi-optical local oscillator injection. Examples of recorded antenna phase patterns at frequencies of 1.4 and 2.5 THz using homodyne detectors are presented. To our knowledge, these are the highest frequency antenna phase patterns ever recovered. Knowledge of both the amplitude and phase patterns in the far field enable a Gauss-Hermite or Gauss-Laguerre beam-mode analysis to be carried out for the antenna, of importance in performance optimization calculations, such as antenna gain and beam efficiency parameters at the design and prototype stage of antenna development. A full description of the beam would also be required if the antenna is to be used to feed a quasi-optical system in the near-field to far-field transition region. This situation could often arise when the device is fitted directly at the back of telescopes in flying observatories. A further benefit of the proposed technique is simplicity for characterizing systems in situ, an advantage of considerable importance as in many situations, the components may not be removable for further characterization once assembled. The proposed methodology is generic and should be useful across the wider sensing community, e.g., in single detector acoustic imaging or in adaptive imaging array applications. Furthermore, it is applicable across other frequencies of the EM spectrum, provided adequate spatial and temporal phase stability of the source can be maintained throughout the measurement process. Phase information retrieval is also of importance to emergent research areas, such as band-gap structure characterization, meta-materials research, electromagnetic cloaking, slow light, super-lens design as well as near-field and virtual imaging applications.

Biomimetic Scaffolds for the Controlled Release of Bioactive Molecules for Tissue Engineering Applications

The temporospatial controlled delivery of growth factors is crucial to trigger the desired healing mechanisms in target tissues. The uncontrolled release of growth factors has been demonstrated to cause severe side effects in its surrounding tissues. Thus, the first working hypothesis was to tune and optimize a newly developed multiscale delivery platform based on a nanostructured silicon particle core (pSi) and a poly (dl-lactide-co-glycolide) acid (PLGA) outer shell. In a murine subcutaneous model, the platform was demonstrated to be fully tunable for the temporal and spatial control release of the payload. Secondly, a multiscale approach was followed in a multicompartment collagen scaffold, to selectively integrate different sets of PLGA-pSi loaded with different reporter proteins. The spatial confinement of the microspheres allowed the release of the reporter proteins in each of the layers of the scaffold. Finally, the staged and zero-order release kinetics enabled the temporal biochemical patterning of the scaffold. The last step of this PhD project was to test if by fully embedding PLGA microspheres in a highly structured and fibrous collagen-based scaffold (camouflaging), it was possible to prevent their early detection and clearance by macrophages. It was further studied whether such a camouflaging strategy was efficient in reducing the production of key inflammatory molecules, while preserving the release kinetics of the payload of the PLGA microspheres. Results demonstrated that the camouflaging allowed for a 10-fold decrease in the number of PLGA microspheres internalized by macrophages, suggesting that the 3D scaffold operated by cloaking the PLGA microspheres. When the production of key inflammatory cytokines induced by the scaffold was assessed, macrophages' response to the PLGA microspheres-integrated scaffolds resulted in a response similar to that observed in the control (not functionalized scaffold) and the release kinetic of a reporter protein was preserved.

Business ethics: a way to identify fraud from the basics

When we look to perform a work for developing a framework to create a business and take it correctly, there are always some persons looking as a challenge those bases and finding a mistake. The way to work in these situations is not a matter of law, is a matter of devoting time to identify these situations. It is always said that the evil goes a step ahead. The business ethics have been altered for quite time by some would-be entrepreneurs. These people have learned to play with business ethics to show your business as prosperous as something that is sought to highlight and adulterate their results quickly. Once the company reaches an international dimension, many companies take on global responsibility and, in these cases where you can see if the objective has been to obtain a rapid capital increase or growth is in line with its proportions. A business ethics is based on establishing a strong base so that interest is encouraged from an early time. Good staff, organizational level should be achieved and not only at the company but, out of the company too. Thus, you can create a secure base to convince potential investors and employees about the business. There are no freeways in business ethics and all fast track can be or a genius or leads to failure. We must find where these jumps are occurring, such errors or corrections to business ethics and their rules. Thus we can differentiate a company or an entrepreneur who is working correctly from the cloaking. Starting from the basics of business ethics and studying the different levels from the personal to the prospect that the company shows in the world. Lets see where these changes are occurring and how we can fight against them and anticipate the market to possible cases of fraud or strange movements seeking to attract the unwary

Radio Frequency Superconducting Quantum Interference Device Meta-atoms and Metamaterials: Experiment, Theory, and Analysis

Metamamterials are 1D, 2D or 3D arrays of articial atoms. The articial atoms, called "meta-atoms", can be any component with tailorable electromagnetic properties, such as resonators, LC circuits, nano particles, and so on. By designing the properties of individual meta-atoms and the interaction created by putting them in a lattice, one can create a metamaterial with intriguing properties not found in nature. My Ph. D. work examines the meta-atoms based on radio frequency superconducting quantum interference devices (rf-SQUIDs); their tunability with dc magnetic field, rf magnetic field, and temperature are studied. The rf-SQUIDs are superconducting split ring resonators in which the usual capacitance is supplemented with a Josephson junction, which introduces strong nonlinearity in the rf properties. At relatively low rf magnetic field, a magnetic field tunability of the resonant frequency of up to 80 THz/Gauss by dc magnetic field is observed, and a total frequency tunability of 100% is achieved. The macroscopic quantum superconducting metamaterial also shows manipulative self-induced broadband transparency due to a qualitatively novel nonlinear mechanism that is different from conventional electromagnetically induced transparency (EIT) or its classical analogs. A near complete disappearance of resonant absorption under a range of applied rf flux is observed experimentally and explained theoretically. The transparency comes from the intrinsic bi-stability and can be tuned on/ off easily by altering rf and dc magnetic fields, temperature and history. Hysteretic in situ 100% tunability of transparency paves the way for auto-cloaking metamaterials, intensity dependent filters, and fast-tunable power limiters. An rf-SQUID metamaterial is shown to have qualitatively the same behavior as a single rf-SQUID with regards to dc flux, rf flux and temperature tuning. The two-tone response of self-resonant rf-SQUID meta-atoms and metamaterials is then studied here via intermodulation (IM) measurement over a broad range of tone frequencies and tone powers. A sharp onset followed by a surprising strongly suppressed IM region near the resonance is observed. This behavior can be understood employing methods in nonlinear dynamics; the sharp onset, and the gap of IM, are due to sudden state jumps during a beat of the two-tone sum input signal. The theory predicts that the IM can be manipulated with tone power, center frequency, frequency difference between the two tones, and temperature. This quantitative understanding potentially allows for the design of rf-SQUID metamaterials with either very low or very high IM response.

Development of a framework for the analysis of document-based phishing campaigns

In questo elaborato di tesi si affronta lo sviluppo di un framework per l'analisi di URL di phishing estratte da documenti malevoli. Tramite il linguaggio python3 e browsers automatizzati si è sviluppata una pipeline per analizzare queste campagne malevole. La pipeline ha lo scopo di arrivare alla pagina finale, evitando di essere bloccata da tecniche anti-bot di cloaking, per catturare una schermata e salvare la pagina in locale. Durante l'analisi tutto il traffico è salvato per analisi future. Ad ogni URL visitato vengono salvate informazioni quali entry DNS, codice di Autonomous System e lo stato nella blocklist di Google. Un'analisi iniziale delle due campagne più estese è stata effettuata, rivelando il business model dietro ad esse e le tecniche usate per proteggere l'infrastruttura stessa.