Potentiel d’une approche populationnelle orientée vers la reconfiguration des environnements urbains pour améliorer la sécurité des piétons

INTRODUCTION : En milieu urbain, l’amélioration de la sécurité des piétons pose un défi de santé publique. Pour chaque décès attribuable aux collisions routières, il y a des centaines de personnes blessées et, dans les pays riches, la diminution du nombre annuel de piétons décédés s’expliquerait en partie par la diminution de la marche. Les stratégies préventives prédominantes n’interviennent pas sur le volume de circulation automobile, un facteur pourtant fondamental. De plus, les interventions environnementales pour améliorer la sécurité des infrastructures routières se limitent habituellement aux sites comptant le plus grand nombre de décès ou de blessés. Cette thèse vise à décrire la contribution des volumes de circulation automobile, des pratiques locales de marche et de la géométrie des routes au nombre et à la répartition des piétons blessés en milieu urbain, et d’ainsi établir le potentiel d’une approche populationnelle orientée vers la reconfiguration des environnements urbains pour améliorer la sécurité des piétons. MÉTHODE : Le devis est de type descriptif et transversal. Les principales sources de données sont les registres des services ambulanciers d’Urgences-santé (blessés de la route), l’enquête Origine-Destination (volumes de circulation automobile), la Géobase du réseau routier montréalais (géométrie des routes) et le recensement canadien (pratiques locales de marche, position socioéconomique). Les analyses descriptives comprennent la localisation cartographique (coordonnées x,y) de l’ensemble des sites de collision. Des modèles de régression multi-niveaux nichent les intersections dans les secteurs de recensement et dans les arrondissements. RÉSULTATS : Les analyses descriptives démontrent une grande dispersion des sites de collision au sein des quartiers. Les analyses multivariées démontrent les effets significatifs, indépendants du volume de circulation automobile, de la présence d’artère(s) et d’une quatrième branche aux intersections, ainsi que du volume de marche dans le secteur, sur le nombre de piétons blessés aux intersections. L’analyse multi-niveaux démontre une grande variation spatiale de l’effet du volume de circulation automobile. Les facteurs environnementaux expliquent une part substantielle de la variation spatiale du nombre de blessés et du gradient socioéconomique observé. DISCUSSION : La grande dispersion des sites de collision confirme la pertinence d’une approche ne se limitant pas aux sites comptant le plus grand nombre de blessés. Les résultats suggèrent que des stratégies préventives basées sur des approches environnementales et populationnelle pourraient considérablement réduire le nombre de piétons blessés ainsi que les inégalités observées entre les quartiers.

La revue de la Chambre de commerce de Montréal et la modernisation de la métropole dans les années 1950 et 1960

Pendant les années 1950 et 1960, Montréal se modernise sur plusieurs aspects. L’influence de l’administration de la ville sur cette modernisation est bien connue. Toutefois, les perspectives des acteurs extérieurs sont souvent ignorées. Ce mémoire examine donc les opinions de la Chambre de commerce de Montréal sur la modernisation de la métropole québécoise lors de ces deux décennies. La source principale utilisée pour effectuer cette étude a été la revue hebdomadaire de la Chambre, Commerce-Montréal. Dans le premier chapitre, les opinions de la Chambre de commerce sur la gouvernance municipale sont examinées. Celles-ci montrent que la Chambre percevait l’assainissement des moeurs politiques et l’amélioration de l’efficacité administrative comme intrinsèques à la modernisation de Montréal. Le deuxième chapitre porte sur la circulation automobile et le transport en commun. La Chambre proposait des moyens d’accélérer le débit de la circulation qu’elle jugeait crucial pour la modernisation de la métropole. Le troisième chapitre traite du développement urbain. D’après la Chambre, la modernisation de Montréal exigeait le renouvellement du cadre bâti de la ville, tant résidentiel que commercial. L’étude de ces trois thèmes confirme que, pendant la période 1950-1970, la Chambre de commerce a contribué de manière significative aux débats concernant la modernisation de Montréal. Nous relevons aussi que l’organisme, malgré son désir de paraître apolitique, a été influencé par sa fonction de représentant de la communauté d’affaires francophone. L’importance accordée à la rentabilité de la modernisation, ainsi que la hiérarchisation sociale attribuée à certains sujets, confirment notamment les orientations conservatrices de l’organisme.

Étude sur simulateur de conduite de la relation entre stress et agressivité au volant

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Étude sur simulateur de conduite de la relation entre stress et agressivité au volant

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Le choix du tout-à-l'automobile à Montréal (1953-1967) : un contexte propice à l’aménagement de l'échangeur Turcot

En l’espace d’une décennie, Montréal s’est durablement transformée. Du milieu des années 1950, où elle représente une ville développée certes, mais dépourvue d'autoroutes, à 1967, année de l’Exposition universelle, la métropole du Québec confirme son choix du tout-à-l’automobile. Le développement autoroutier qu’elle réalise à cette époque doit alors être en mesure de répondre aux besoins de la société à court comme à long terme. Ce réseau perdure toujours de nos jours. Nous souhaitons décomposer la trame de cette période mouvementée afin de comprendre comment Montréal a pu adopter cette orientation aussi rapidement. Il est question d’aborder les éléments ayant permis de centraliser le thème de la circulation à Montréal. La réponse des autorités et la volonté de planifier la ville à long terme nous conduisent ensuite à une réalisation accélérée d’un réseau autoroutier métropolitain d’envergure dont l’échangeur Turcot représente l’aboutissement en 1967. Cette étude permet de mieux examiner l’histoire de ce projet autoroutier majeur qui a constitué un des symboles forts de la modernisation de Montréal et du Québec. L’échangeur Turcot construit dans les années 1960 est le fruit d’une conjoncture particulière, correspondant à des besoins et des attentes tout autre que ceux qui prévalent actuellement. Nous concluons ainsi en nous questionnant sur la construction actuelle du nouvel échangeur Turcot, et en affirmant qu’elle ne correspond peut-être pas aux besoins d’une métropole du XXIe siècle.

A naturally shaped silicone ventricle evaluated in a mock circulation loop : a preliminary study

Mock circulation loops are used to evaluate the performance of cardiac assist devices prior to animal and clinical testing. A compressible, translucent silicone ventricle chamber that mimics the exact size, shape and motion of a failing heart is desired to assist in flow visualization studies around inflow cannulae during VAD support. The aim of this study was therefore to design and construct a naturally shaped flexible left ventricle and evaluate its performance in a mock circulation loop. The ventricle shape was constructed by the use of CT images taken from a patient experiencing cardiomyopathic heart failure and used to create a 3D image and subsequent mould to produce a silicone ventricle. Different cardiac conditions were successfully simulated to validate the ventricle performance, including rest, left heart failure and VAD support.

Simulation and development of a mock circulation loop with variable compliance

Heart disease is attributed as the highest cause of death in the world. Although this could be alleviated by heart transplantation, there is a chronic shortage of donor hearts and so mechanical solutions are being considered. Currently, many Ventricular Assist Devices (VADs) are being developed worldwide in an effort to increase life expectancy and quality of life for end stage heart failure patients. Current pre-clinical testing methods for VADs involve laboratory testing using Mock Circulation Loops (MCLs), and in vivo testing in animal models. The research and development of highly accurate MCLs is vital to the continuous improvement of VAD performance. The first objective of this study was to develop and validate a mathematical model of a MCL. This model could then be used in the design and construction of a variable compliance chamber to improve the performance of an existing MCL as well as form the basis for a new miniaturised MCL. An extensive review of literature was carried out on MCLs and mathematical modelling of their function. A mathematical model of a MCL was then created in the MATLAB/SIMULINK environment. This model included variable features such as resistance, fluid inertia and volumes (resulting from the pipe lengths and diameters); compliance of Windkessel chambers, atria and ventricles; density of both fluid and compressed air applied to the system; gravitational effects on vertical columns of fluid; and accurately modelled actuators controlling the ventricle contraction. This model was then validated using the physical properties and pressure and flow traces produced from a previously developed MCL. A variable compliance chamber was designed to reproduce parameters determined by the mathematical model. The function of the variability was achieved by controlling the transmural pressure across a diaphragm to alter the compliance of the system. An initial prototype was tested in a previously developed MCL, and a variable level of arterial compliance was successfully produced; however, the complete range of compliance values required for accurate physiological representation was not able to be produced with this initial design. The mathematical model was then used to design a smaller physical mock circulation loop, with the tubing sizes adjusted to produce accurate pressure and flow traces whilst having an appropriate frequency response characteristic. The development of the mathematical model greatly assisted the general design of an in vitro cardiovascular device test rig, while the variable compliance chamber allowed simple and real-time manipulation of MCL compliance to allow accurate transition between a variety of physiological conditions. The newly developed MCL produced an accurate design of a mechanical representation of the human circulatory system for in vitro cardiovascular device testing and education purposes. The continued improvement of VAD test rigs is essential if VAD design is to improve, and hence improve quality of life and life expectancy for heart failure patients.

Validation of the MEASURE automobile emissions model : a statistical analysis

The Mobile Emissions Assessment System for Urban and Regional Evaluation (MEASURE) model provides an external validation capability for hot stabilized option; the model is one of several new modal emissions models designed to predict hot stabilized emission rates for various motor vehicle groups as a function of the conditions under which the vehicles are operating. The validation of aggregate measurements, such as speed and acceleration profile, is performed on an independent data set using three statistical criteria. The MEASURE algorithms have proved to provide significant improvements in both average emission estimates and explanatory power over some earlier models for pollutants across almost every operating cycle tested.

A compact mock circulation loop for the in vitro testing of cardiovascular devices

In vitro cardiovascular device performance evaluation in a mock circulation loop (MCL) is a necessary step prior to in vivo testing.A MCL that accurately represents the physiology of the cardiovascular system accelerates the assessment of the device’s ability to treat pathological conditions. To serve this purpose, a compact MCL measuring 600 ¥ 600 ¥ 600 mm (L ¥ W¥ H) was constructed in conjunction with a computer mathematical simulation.This approach allowed the effective selection of physical loop characteristics, such as pneumatic drive parameters, to create pressure and flow, and pipe dimensions to replicate the resistance, compliance, and fluid inertia of the native cardiovascular system. The resulting five-element MCL reproduced the physiological hemodynamics of a healthy and failing heart by altering ventricle contractility, vascular resistance/compliance, heart rate, and vascular volume. The effects of interpatient anatomical variability, such as septal defects and valvular disease, were also assessed. Cardiovascular hemodynamic pressures (arterial, venous, atrial, ventricular), flows (systemic, bronchial, pulmonary), and volumes (ventricular, stroke) were analyzed in real time. The objective of this study is to describe the developmental stages of the compact MCL and demonstrate its value as a research tool for the accelerated development of cardiovascular devices.

Modeling circulation of train-set with multiple routing

Planning on utilization of train-set is one of the key tasks of transport organization for passenger dedicated railway in China. It also has strong relationships with timetable scheduling and operation plans at a station. To execute such a task in a railway hub pooling multiple railway lines, the characteristics of multiple routing for train-set is discussed in term of semicircle of train-sets' turnover. In programming the described problem, the minimum dwell time is selected as the objectives with special derive constraints of the train-set's dispatch, the connecting conditions, the principle of uniqueness for train-sets, and the first plus for connection in the same direction based on time tolerance σ. A compact connection algorithm based on time tolerance is then designed. The feasibility of the model and the algorithm is proved by the case study. The result indicates that the circulation model and algorithm about multiple routing can deal with the connections between the train-sets of multiple directions, and reduce the train's pulling in or leaving impact on the station's throat.

Replication of the Frank-Starling response in a Mock Circulation loop

Mock circulation loops (MCLs) are used to evaluate cardiovascular devices prior to in-vivo trials; however they lack the vital autoregulatory responses that occur in humans. This study aimed to develop and implement a left and right ventricular Frank-Starling response in a MCL. A proportional controller based on ventricular end diastolic volume was used to control the driving pressure of the MCL’s pneumatically operated ventricles. Ventricular pressure-volume loops and end systolic pressure-volume relationships were produced for a variety of healthy and pathological conditions and compared with human data to validate the simulated Frank-Starling response. The non-linear Frank-Starling response produced in this study successfully altered left and right ventricular contractility with changing preload and was validated with previously reported data. This improvement to an already detailed MCL has resulted in a test rig capable of further refining cardiovascular devices and reducing the number of in-vivo trials.

Excess power circulation in distribution networks containing distributed energy resources

The presence of large number of single-phase distributed energy resources (DERs) can cause severe power quality problems in distribution networks. The DERs can be installed in random locations. This may cause the generation in a particular phase exceeds the load demand in that phase. Therefore the excess power in that phase will be fed back to the transmission network. To avoid this problem, the paper proposes the use of distribution static compensator (DSTATCOM) that needs to be connected at the first bus following a substation. When operated properly, the DSTATCOM can facilitate a set of balanced current flow from the substation, even when excess power is generated by DERs. The proposals are validated through extensive digital computer simulation studies using PSCAD and MATLAB.

Joseph Maiden and the national and transnational circulation of Wattle Acacia spp

During the nineteenth century and in the early years of the twentieth century wattle was circulated by botanists, botanical institutions, interested individuals, commercial seedsmen and government authorities. Wattle bark was used in the production of leather and was the subject of debate regarding its commercial development and conservation in Australia. It was also trialled in many other locations including America, New Zealand, Hawaii and Russia. In the process, South Africa became a major producer of wattle bark for a global market. At the same time wattle was also promoted as a symbol of Australian nationalism. This paper considers this movement of wattles, wattle material and wattle information by examining the career of one active agent in these botanical transfers: Joseph Maiden. In doing so it demonstrates that these seemingly different uses of the wattle overlap transnational and national spheres.

Increased platelet-derived microparticles in the coronary circulation of percutaneous transluminal coronary angioplasty patients

Platelet-derived microparticles that are produced during platelet activation are capable of adhesion and aggregation. Endothelial trauma that occurs during percutaneous transluminal coronary angioplasty (PTCA) may support platelet-derived microparticle adhesion and contribute to development of restenosis. We have previously reported an increase in platelet-derived microparticles in peripheral arterial blood with angioplasty. This finding raised concerns regarding the role of plateletderived microparticles in restenosis, and therefore the aim of this study was to monitor levels in the coronary circulation. The study population consisted of 19 angioplasty patients. Paired coronary artery and sinus samples were obtained following heparinization, following contrast administration, and subsequent to all vessel manipulation. Platelet-derived microparticles were identified with an anti-CD61 (glycoprotein IIIa) fluorescence-conjugated antibody using flow cytometry. There was a significant decrease in arterial platelet-derived microparticles from heparinization to contrast administration (P 0.001), followed by a significant increase to the end of angioplasty (P 0.004). However, there was no significant change throughout the venous samples. These results indicate that the higher level of platelet-derived microparticles after angioplasty in arterial blood remained in the coronary circulation. Interestingly, levels of thrombin–antithrombin complexes did not rise during PTCA. This may have implications for the development of coronary restenosis post-PTCA, although this remains to be determined.