Studio degli eventi erosivi in quattro aree campione della costa emiliano-romagnola

Il progetto di tesi ha analizzato i processi erosivi in atto in quattro aree della costa emilianoromagnola settentrionale, situate davanti a importanti foci fluviali: Volano, Reno, F. Uniti e Savio. Il lavoro di tesi si colloca all’interno di un progetto più ampio, che prevede la collaborazione tra la Regione Emilia Romagna, Servizio Geologico, Sismico e dei Suoli e l’Istituto di Scienze Marine ISMAR-CNR, sede di Bologna. Quest’ultimo ha acquisito, durante la campagna ERO2010, 210 km di profili sismici ad alta risoluzione in un’area sotto-costa, posta tra i 2 e gli 8 metri di profondità. Il lavoro di tesi ha usufruito di una nuova strategia di analisi, la sismica ad alta risoluzione (Chirp sonar), che ha permesso di identificare ed esaminare l’architettura geologica riconoscibile nei profili ed approfondire la conoscenza dell’assetto sub-superficiale dei depositi, ampliando le conoscenze di base riguardanti la dinamica dei litorali. L’interpretazione dei dati disponibili è avvenuta seguendo differenti fasi di studio: la prima, più conoscitiva, ha previsto l’identificazione delle evidenze di erosione nelle aree in esame mediante l’analisi della variazione delle linee di riva, l’osservazione delle opere poste a difesa del litorale e lo studio dell’evoluzione delle principali foci. Nella fase successiva le facies identificate nei profili sismici sono state interpretate in base alle loro caratteristiche geometriche ed acustiche, identificando le principali strutture presenti e interpretando, sulla base delle informazioni storiche apprese e delle conoscenze geologiche a disposizione, i corpi sedimentari riconosciuti. I nuovi profili Chirp sonar hanno consentito la ricostruzione geologica mediante la correlazione dei dati a mare (database ISMAR-CNR, Bologna, Carta geologica dei mari italiani 1:250.000) con quelli disponibili a terra, quali Carta dell’evoluzione storica dei cordoni costieri (Servizio Geologico e Sismico dei Suoli, Bo) e Carta geologica 1:50.000 (Servizio Geologico d’Italia e Progetto CARG). La conoscenza dei termini naturali e antropici dello stato fisico dei sistemi costieri è il presupposto necessario per l'esecuzione di studi ambientali atti a una corretta gestione integrata della costa. L’analisi approfondita della geologia superficiale fornisce un’opportunità per migliorare il processo decisionale nella gestione dei litorali e nella scelta degli interventi da attuare sulla costa, che devono essere fatti consapevolmente considerando l’assetto geologico e prevedendo una strategia di manutenzione della costa a medio termine. Un singolo intervento di ripascimento produce effetti di breve durata e non sufficienti a sanare il problema e a mitigare il rischio costiero. Nei tratti costieri scarsamente alimentati, soggetti a persistenti fenomeni erosivi, occorre, pertanto, mettere in atto ripetuti interventi di ripascimento accompagnati da un idoneo piano di monitoraggio.

(Table 1) Radiocarbon ages of core AB01/94 obtained in the Tromper Wiek, western Baltic Sea

In the Tromper Wiek northeast of Rügen, acoustical investigations using Air Gun, Boomer, Chirp Sonar and Sediment-Echosounder were carried out. Together with sediment core information, it allowed the identification of five seismostratigraphic units (E1 to E5). Conventional and AMS-14C-datings supported their chronostratigraphical classification. The uppermost till (E1) was incised by late glacial channels filled with glaciolacustrine sediments (E2) of the early Baltic Ice Lake stages. These were regionally overlain with a sharp unconformity by a thick (locally >20 m) sedimentary complex (E3) of acoustically laminated silts of freshwater origin. This lower part of the E3-complex (E3a) is overlain by fluvial to coastal silty fine sands (E3b) deeper towards the Arkona Basin. Fine plant debris in the uppermost part of sub-unit E3a yielded ages of 10,100 and 10,500 14C-years B.P., representing the final phase of the Baltic Ice Lake. The fine sands of sub-unit E3b were deposited after the final drainage of the Baltic Ice Lake. In the shallower central part of the bay, the silts of sub-unit E3a were covered by a younger unit (E4) of fine sand with plant debris. A sedge peat occurring at the basis of unit E4 yielded an age of 9,590 14C-years B.P. The fine sands overlying the unit E3 in the central part of Tromper Wiek were deposited in the Ancylus Lake. Their position at about 20 m below present sea level (b.s.l.) reflects the maximum highstand in this area. The character and distribution of the Early Holocene deposits at greater depth suggest a lake water level at about 30 m b.s.l. after this highstand. Below 25 m b.s.l. muddy Littorina Sea sediments are observed. The thickness of these muds and sandy muds increases gradually towards the Arkona Basin. Locally, they are found in a channel-like structure immediately north of Jasmund.

Caracterização geológica e geofísica da área do porto da Figueira da Foz

No âmbito de um projeto realizado para a Administração Portuária do Porto da Figueira da Foz, foram recolhidos dados geofísicos no offshore da costa da Figueira da Foz, utilizando um sistema combinado de sonar de varrimento lateral e de sísmica de alta resolução com o objetivo de compreender a distribuição de sedimentos ao longo do fundo marinho e assim entender melhor a sua origem. Os dados de varrimento lateral foram processados, analisados e representados em mosaicos recorrendo ao software integrado TRINTON Prespective. Foram colhidas 10 amostras de sedimentos de fundo que foram analisadas do ponto de vista granulométrico e que foram usadas para a calibração dos mosaicos do sonar de varrimento lateral de modo a produzir um mapa semi-quantitativo de classificação dos sedimentos de fundo. Os dados de reflexão sísmica foram processados e analisados através dos softwares SPW e RadExPro. Os mapas de sonar de varrimento lateral produzidos (mosaicos) mostram uma relação entre o tamanho de grão e composição dos depósitos de plataforma interna e os processos geológicos que ocorrem na zona costeira adjacente. Também se verifica uma relação entre a orientação da costa e a sua consequente exposição às ondas incidentes, e como isso afeta e altera a distribuição do tamanho grão. Neste contexto, a interpretação combinada dos mosaicos do sonar de varrimento lateral com os dados de granulometria e a batimetria dos sedimentos permitiram uma cartografia interpretativa detalhada da morfologia do mar, uma melhor compreensão do controlo da linha costeira na propagação das ondas e correntes e, por conseguinte, na transferência de sedimento no litoral. Os dados de sísmica permitem ainda verificar a espessura das várias camadas geológicas em profundidade.

Chirp-spread-spectrum-based real time location system for construction safety management: A case study

Observing the working procedure of construction workers is an effective means of maintaining the safety performance of a construction project. It is also difficult to achieve due to a high worker-to-safety-officer ratio. There is an imminent need for the development of a tool to assist in the real-time monitoring of workers, in order to reduce the number of construction accidents. The development and application of a real time locating system (RTLS) based on the Chirp Spread Spectrum (CSS) technique is described in this paper for tracking the real-time position of workers on construction sites. Experiments and tests were carried out both on- and off-site to verify the accuracy of static and dynamic targets by the system, indicating an average error of within one metre. Experiments were also carried out to verify the ability of the system to identify workers’ unsafe behaviours. Wireless data transfer was used to simplify the deployment of the system. The system was deployed in a public residential construction project and proved to be quick and simple to use. The cost of the developed system is also reported to be reasonable (around 1800USD) in this study and is much cheaper than the cost of other RTLS. In addition, the CCS technique is shown to provide an economical solution with reasonable accuracy compared with other positioning systems, such as ultra wideband. The study verifies the potential of the CCS technique to provide an effective and economical aid in the improvement of safety management in the construction industry.

Novel signal demodulation technique to estimate the amount of chirp in fiber Bragg gratings

A novel detection technique to estimate the amount of chirp in fiber Bragg gratings (FBGs) is proposed. This method is based on the fact that reflectivity at central wavelength of FBG reflection changes with strain/temperature gradient (linear chirp) applied to the same. Transfer matrix approach was used to vary different grating parameters (length, strength and apodization) to optimize variation of reflectivity with linear chirp. Analysis is done for different sets of `FBG length-refractive index strength' combinations for which reflectivity vary linearly with linear chirp over a decent measurement range. This article acts as a guideline to choose appropriate grating parameters in designing sensing apparatus based on change in reflectivity at central wavelength of FBG reflection.

Enhanced 10-Gbit/s link performance for directly Modulated complex-coupled DFB lasers via resonance frequency, damping rate, and chirp

This paper demonstrates the respective roles that combined index- and gain-coupling play in the overall link performance of distributed feedback (DFB) lasers. Their impacts on both static and dynamic properties such as slope efficiency, resonance frequency, damping rate, and chirp are investigated. Simulation results are compared with experimental data with good agreement. Transmission-oriented optimization is then demonstrated based on a targeted specification. The design tradeoffs are revealed, and it is shown that a modest combination of index- and gain-coupling enables optimum transmission at 10 Gbit/s.

Noise and stability in giant-chirp oscillators mode-locked with a nanotube-based saturable absorber

We compare experimental results showing stable dissipative-soliton solutions exist in mode-locked lasers with ultra-large normal dispersion (as large as 21.5 ps2), with both the analytic framework provided by Haus' master-equation and full numerical simulations. © 2010 Optical Society of America.

Whales and Sonar: Environmental Exemptions for the Navy’s Mid-Frequency Active Sonar Training

Mid-frequency active (MFA) sonar emits pulses of sound from an underwater transmitter to help determine the size, distance, and speed of objects. The sound waves bounce off objects and reflect back to underwater acoustic receivers as an echo. MFA sonar has been used since World War II, and the Navy indicates it is the only reliable way to track submarines, especially more recently designed submarines that operate more quietly, making them more difficult to detect. Scientists have asserted that sonar may harm certain marine mammals under certain conditions, especially beaked whales. Depending on the exposure, they believe that sonar may damage the ears of the mammals, causing hemorrhaging and/or disorientation. The Navy agrees that the sonar may harm some marine mammals, but says it has taken protective measures so that animals are not harmed. MFA training must comply with a variety of environmental laws, unless an exemption is granted by the appropriate authority. Marine mammals are protected under the Marine Mammal Protection Act (MMPA) and some under the Endangered Species Act (ESA). The training program must also comply with the National Environmental Policy Act (NEPA), and in some cases the Coastal Zone Management Act (CZMA). Each of these laws provides some exemption for certain federal actions. The Navy has invoked all of the exemptions to continue its sonar training exercises. Litigation challenging the MFA training off the coast of Southern California ended with a November 2008 U.S. Supreme Court decision. The Supreme Court said that the lower court had improperly favored the possibility of injuring marine animals over the importance of military readiness. The Supreme Court’s ruling allowed the training to continue without the limitations imposed on it by other courts. (pdf contains 20pp.)

Survey report of NOAA Ship McArthur II cruises AR-04-04, AR-05-05 and AR-06-03: Habitat classification of side scan sonar imagery in support of deep-sea coral/sponge explorations at the Olympic Coast National Marine Sanctuary

Habitat mapping and characterization has been defined as a high-priority management issue for the Olympic Coast National Marine Sanctuary (OCNMS), especially for poorly known deep-sea habitats that may be sensitive to anthropogenic disturbance. As a result, a team of scientists from OCNMS, National Centers for Coastal Ocean Science (NCCOS), and other partnering institutions initiated a series of surveys to assess the distribution of deep-sea coral/sponge assemblages within the sanctuary and to look for evidence of potential anthropogenic impacts in these critical habitats. Initial results indicated that remotely delineating areas of hard bottom substrate through acoustic sensing could be a useful tool to increase the efficiency and success of subsequent ROV-based surveys of the associated deep-sea fauna. Accordingly, side scan sonar surveys were conducted in May 2004, June 2005, and April 2006 aboard the NOAA Ship McArthur II to: (1) obtain additional imagery of the seafloor for broader habitat-mapping coverage of sanctuary waters, and (2) help delineate suitable deep-sea coral/sponge habitat, in areas of both high and low commercial-fishing activities, to serve as sites for surveying-in more detail using an ROV on subsequent cruises. Several regions of the sea floor throughout the OCNMS were surveyed and mosaicked at 1-meter pixel resolution. Imagery from the side scan sonar mapping efforts was integrated with other complementary data from a towed camera sled, ROVs, sedimentary samples, and bathymetry records to describe geological and biological (where possible) aspects of habitat. Using a hierarchical deep-water marine benthic classification scheme (Greene et al. 1999), we created a preliminary map of various habitat polygon features for use in a geographical information system (GIS). This report provides a description of the mapping and groundtruthing efforts as well as results of the image classification procedure for each of the areas surveyed. (PDF contains 60 pages.)

Olympic Coast National Marine Sanctuary Habitat Mapping: Survey report and classification of side scan sonar data from surveys HMPR-114-2004-02 and HMPR-116-2005-01.

The Olympic Coast National Marine Sanctuary (OCNMS) continues to invest significant resources into seafloor mapping activities along Washington’s outer coast (Intelmann and Cochrane 2006; Intelmann et al. 2006; Intelmann 2006). Results from these annual mapping efforts offer a snapshot of current ground conditions, help to guide research and management activities, and provide a baseline for assessing the impacts of various threats to important habitat. During the months of August 2004 and May and July 2005, we used side scan sonar to image several regions of the sea floor in the northern OCNMS, and the data were mosaicked at 1-meter pixel resolution. Video from a towed camera sled, bathymetry data, sedimentary samples and side scan sonar mapping were integrated to describe geological and biological aspects of habitat. Polygon features were created and attributed with a hierarchical deep-water marine benthic classification scheme (Greene et al. 1999). For three small areas that were mapped with both side scan sonar and multibeam echosounder, we made a comparison of output from the classified images indicating little difference in results between the two methods. With these considerations, backscatter derived from multibeam bathymetry is currently a costefficient and safe method for seabed imaging in the shallow (<30 meters) rocky waters of OCNMS. The image quality is sufficient for classification purposes, the associated depths provide further descriptive value and risks to gear are minimized. In shallow waters (<30 meters) which do not have a high incidence of dangerous rock pinnacles, a towed multi-beam side scan sonar could provide a better option for obtaining seafloor imagery due to the high rate of acquisition speed and high image quality, however the high probability of losing or damaging such a costly system when deployed as a towed configuration in the extremely rugose nearshore zones within OCNMS is a financially risky proposition. The development of newer technologies such as intereferometric multibeam systems and bathymetric side scan systems could also provide great potential for mapping these nearshore rocky areas as they allow for high speed data acquisition, produce precisely geo-referenced side scan imagery to bathymetry, and do not experience the angular depth dependency associated with multibeam echosounders allowing larger range scales to be used in shallower water. As such, further investigation of these systems is needed to assess their efficiency and utility in these environments compared to traditional side scan sonar and multibeam bathymetry. (PDF contains 43 pages.)

Benthic habitat mapping in the Olympic Coast National Marine Sanctuary: Classification of side scan sonar data from survey HMPR-108-2002-01: Version I

In September 2002, side scan sonar was used to image a portion of the sea floor in the northern OCNMS and was mosaiced at 1-meter pixel resolution using 100 kHz data collected at 300-meter range scale. Video from a remotely-operated vehicle (ROV), bathymetry data, sedimentary samples, and sonar mapping have been integrated to describe geological and biological aspects of habitat and polygon features have been created and attributed with a hierarchical deep-water marine benthic classification scheme (Greene et al. 1999). The data can be used with geographic information system (GIS) software for display, query, and analysis. Textural analysis of the sonar images provided a relatively automated method for delineating substrate into three broad classes representing soft, mixed sediment, and hard bottom. Microhabitat and presence of certain biologic attributes were also populated into the polygon features, but strictly limited to areas where video groundtruthing occurred. Further groundtruthing work in specific areas would improve confidence in the classified habitat map. (PDF contains 22 pages.)

Detección automática de presencia/ausencia de atún en imágenes obtenidas mediante sonar de largo alcance a bordo de buques pesqueros y aplicación de Optical Character Recognition (OCR) para la extracción de parámetros

En esta tesis de máster se presenta una metodología para el análisis automatizado de las señales del sonar de largo alcance y una aplicación basada en la técnica de reconocimiento óptico de Optical Character Recognition, caracteres (OCR). La primera contribución consiste en el análisis de imágenes de sonar mediante técnicas de procesamiento de imágenes. En este proceso, para cada imagen de sonar se extraen y se analizan las regiones medibles, obteniendo para cada región un conjunto de características. Con la ayuda de los expertos, cada región es identi cada en una clase (atún o no-atún). De este modo, mediante el aprendizaje supervisado se genera la base de datos y, a su vez, se obtiene un modelo de clasi cación. La segunda contribución es una aplicación OCR que reconoce y extrae de las capturas de pantalla de imágenes de sonar, los caracteres alfanuméricos correspondientes a los parámetros de situación (velocidad, rumbo, localización GPS) y la confi guración de sonar (ganancias, inclinación, ancho del haz). El objetivo de este proceso es el de maximizar la e ficiencia en la detección de atún en el Golfo de Vizcaya y dar el primer paso hacia el desarrollo de un índice de abundancia de esta especie, el cual esté basado en el procesamiento automático de las imágenes de sonar grabadas a bordo de la ota pesquera durante su actividad pesquera rutinaria.

Detecting fish aggregations from reef habitats mapped with high resolution side scan sonar imagery

As part of a multibeam and side scan sonar (SSS) benthic survey of the Marine Conservation District (MCD) south of St. Thomas, USVI and the seasonal closed areas in St. Croix—Lang Bank (LB) for red hind (Epinephelus guttatus) and the Mutton Snapper (MS) (Lutjanus analis) area—we extracted signals from water column targets that represent individual and aggregated fish over various benthic habitats encountered in the SSS imagery. The survey covered a total of 18 km2 throughout the federal jurisdiction fishery management areas. The complementary set of 28 habitat classification digital maps covered a total of 5,462.3 ha; MCDW (West) accounted for 45% of that area, and MCDE (East) 26%, LB 17%, and MS the remaining 13%. With the exception of MS, corals and gorgonians on consolidated habitats were significantly more abundant than submerged aquatic vegetation (SAV) on unconsolidated sediments or unconsolidated sediments. Continuous coral habitat was the most abundant consolidated habitat for both MCDW and MCDE (41% and 43% respectively). Consolidated habitats in LB and MS predominantly consisted of gorgonian plain habitat with 95% and 83% respectively. Coral limestone habitat was more abundant than coral patch habitat; it was found near the shelf break in MS, MCDW, and MCDE. Coral limestone and coral patch habitats only covered LB minimally. The high spatial resolution (0.15 m) of the acquired imagery allowed the detection of differing fish aggregation (FA) types. The largest FA densities were located at MCDW and MCDE over coral communities that occupy up to 70% of the bottom cover. Counts of unidentified swimming objects (USOs), likely representing individual fish, were similar among locations and occurred primarily over sand and shelf edge areas. Fish aggregation school sizes were significantly smaller at MS than the other three locations (MCDW, MCDE, and LB). This study shows the advantages of utilizing SSS in determining fish distributions and density.