Nuevos materiales para envasado activo de alimentos. "Proyecto Chill-On"

La seguridad alimentaria es una de las principales prioridades para la cadena de suministro de los alimentos refrigerados y congelados. Los productos deben llegar en las mejores condiciones de conservación y en un estado óptimo al consumidor. Pero cualquier alimento, antes de llegar a la mesa, ha seguido un complejo proceso logístico que va desde el envasado del producto, su traslado de la fábrica al almacén, al distribuidor y al punto de venta utilizando en este recorrido diferentes medios de transporte; terrestres, marítimos, ferroviarios, un conjunto de operaciones que forman parte de la cadena de suministro del producto. Y es aquí donde entra el proyecto Chill-On y donde cobra todo su interés. Su objetivo no es otro que aprovechar las nuevas tecnologías de la información como herramienta para mejorar la calidad, seguridad y transparencia de la cadena de suministro alimentaria. Las etiquetas eCHILL-ON y su integración en el envase hacen que las actividades de investigación se centren en los envases inteligentes. Se trata de una combinación de etiquetas con indicadores Tiempo-Temperatura (TTI) y etiquetas de Identificación por Radiofrecuencia (RFID), que permiten la localización y trazabilidad del producto en cualquiera de las diferentes etapas del proceso logístico. Lo que hace posible detectar cambios en el producto de manera inmediata y por lo tanto rectificar para que ese producto llegue en las mejores condiciones a su destino.

Chill requirement and budburst uniformity on cultivar maxigala grafted on different rootstocks.

2016

Winter-feeding systems for gestating sheep II. Effects on feedlot performance, glucose tolerance, and carcass composition of lamb progeny

Mature pregnant crossbred ewes (n = 90) were used in a randomized complete block design experiment and were assigned to 1 of 3 winter-feeding systems differing in primary feed source: haylage (HL), limit-fed corn (CN), or limit-fed dried distillers grains (DDGS). Effects of these winter-feeding strategies on postweaning progeny performance were determined. Lamb progeny (n = 96) were weaned at 61 +/- 4 d of age and fed a common high-concentrate diet. Lambs were assigned to feedlot pen (n = 18) based on dam mid-gestation pen. Growth rate, DMI, and ADG were determined for the first 40 d of the finishing period. At 96 +/- 4 d of age, 1 wether lamb was randomly selected from each pen (n = 18) for a glucose tolerance test. The experiment was terminated, and lambs were slaughtered individually when they were determined to have achieved 0.6-cm 12th-rib fat thickness. After a 24-h chill, carcass data were collected and a 2.54-cm chop was removed from each lamb from the LM posterior to the 12th rib for ether extract analysis. Additional carcass measurements of bone, muscle, and fat from the shoulder, rack, loin, and leg were collected on 35 carcasses. At weaning, lamb BW was not different among treatments, whereas final BW tended to be greater (P = 0.09) for lambs from ewes fed DDGS and CN during gestation than from those fed HL. Overall lamb growth rate from birth to slaughter was not different among treatments. Lambs from ewes fed DDGS vs. CN or HL tended to have a greater initial insulin response (P = 0.09). Dressing percent was less (P = 0.04) in lambs from ewes fed DDGS, but no difference (P = 0.16) was detected in HCW among treatments. As expected, 12th rib fat thickness was similar among treatments, whereas LM area was largest to smallest (P = 0.05) in lambs from ewes fed CN, HL, and DDGS, respectively. Proportion of internal fat tended to be greatest to smallest (P = 0.06) in lambs from ewes fed DDGS, CN, and HL, respectively. Calculated boneless trimmed retail cuts percentage was less (P = 0.04) in lambs from ewes fed DDGS than CN or HL. Loin muscle weight as a percentage of wholesale cut tended (P = 0.10) to be greater in lambs from ewes fed CN and HL than DDGS, whereas other muscle, bone, and fat weights and proportions were similar (P > 0.24) among treatments. Prepartum diet during mid to late gestation of ewes altered postnatal fat and muscle deposition and may be associated with alterations in insulin sensitivity of progeny.

The impact of breeding on fruit production in warm climates of Brazil

Brazil is a very large country with a diverse climate. This fact allows a diversity of plants to grow ranging from tropical rainforest in the Amazon, passing through Atlantic Forest along the coast, the cerrados (Brazilian savannah) in the Central West region, and semi-arid area in the Northeast. Latitude ranges from 5º N to 33º S, with most of this territory in the tropical region. There are enough reasons to plant breeders devoting great amount of their effort to improve plants suitable for warm climates, though. Among fruit crops, results of breeder's work have been noticed in several species, especially on peaches, grapes, citrus, apples, persimmons, figs, pears and others not so common, such as acerola, guava, annonas (sour sop, sugar apple, atemoya, cherimoya) and passion fruit. Peach tree introduced at low latitude (22 ± 2ºS) requires climatic adaptation to subtropical conditions of low chilling. In Brazil, the first peach breeding program aiming adaptation of cultivars to different habitats was developed by Instituto Agronômico de Campinas (IAC) beginning in the end of the 40's. Apple low chill requirement cultivars obtained in a South state, Paraná, are now been planted at low latitudes. Banana and pineapple breeding programs from Embrapa units along the country are successfully facing new sanitary problems. Petrolina/Juazeiro, in the Northeastern region (9ºS), is the main grape exporting region with more than 6,000 ha. Grape growing in the region is based in the so called "tropical" rootstocks released by IAC, namely: IAC 313 'Tropical', IAC 572 'Jales'. Recently, Embrapa Grape and Wine released tropical grape seedless cultivars that are changing table grape scenario in the country.

Effect Of Raw Material Quality On The Shelf Life Of Frozen Stored Fish And Fishery Products

Frozen storage characteristics and shelflife vary considerably among species as well as within the species (Powrie, 1973; Fennema. 1973). This can be attributed to the variation in the composition of fish among various species. In certain species like sardines and mackerel. wide seasonal variation in chemical composition occur within the species. These variations affect the quality and shelflife. The nutritional level of water. spawning, method of catching, struggling etc. are found to have profound influence on the condition of the fresh fish. Soon after death the deteriorative changes in fish start due to autolysis and bacterial growth. The rate of these changes depends mainly on temperature. The handling methods have great influence on bacterial contamination. Thus the type oi'handling. temperature control. period of chill storage. processing methods. type of freezing, condition of frozen storage and period of storage affect the quality and shelflife Of the fisho In the present study extensive investigations were carried out on various factors affecting the quality of fish as well as their effect on the physical. chemical and sensory qualities of fish during frozen storage and the shelflife

Effects of silicon content and cooling rate on mechanical properties of heavy section ductile cast iron

The effects of Si and cooling rate are investigated for their effect on the mechanical properties and microstructure. Three alloys were chosen with varying C and Si contents and an attempt to keep the remainder of the elements present constant. Within each heat, three test blocks were poured. Two blocks had chills – one with a fluid flowing through it to cool it (active chill) and one without the fluid (passive) – and the third block did not have a chill. Cooling curves were gathered and analyzed. The mechanical properties of the castings were correlated to the microstructure, cooling rate and Si content of each block. It was found that an increase in Si content increased the yield stress, tensile strength and hardness but decreased the impact toughness, elongation and Young’s modulus. The fast cooling rates produced by the chills caused a high nodule count in the castings along with a fine ferrite grain size and a high degree of nodularity. The fine microstructures, in turn, increased the strength and ductile to brittle transition temperature (DBTT) of the castings. The fast cooling rate was not adequate to overcome the dramatic increase in DBTT that is caused by the addition of Si.

Influence of climate change on the flowering of temperate fruit trees

It is well known that winter chilling is necessary for the flowering of temperate trees. The chilling requirement is a criterion for choosing a species or variety at a given location. Also chemistry products can be used for reducing the chilling-hours needs but make our production more expensive. This study first analysed the observed values of chilling hours for some representative agricultural locations in Spain for the last three decades and their projected changes under climate change scenarios. Usually the chilling is measured and calculated as chilling-hours, and different methods have been used to calculate them (e.g. Richarson et al., 1974 among others) according to the species considered. For our objective North Carolina method (Shaltout and Unrath, 1983) was applied for apples, Utah method (Richardson et al. 1974) for peach and grapevine and the approach used by De Melo-Abreu et al. (2004) for olive trees. The influence of climate change in temperate trees was studied by calculating projections of chilling-hours with climate data from Regional Climate Models (RCMs) at high resolution (25 km) from the European Project ENSEMBLES (http://www.ensembles-eu.org/). These projections will allow for analysing the modelled variations of chill-hours between 2nd half of 20C and 1st half of 21C at the study locations.

Thermal measurements on sub-Antarctic megaherbs and environmental characteristics on Campbell Island in 2010

We evaluated whether heating occurs in sub-Antarctic megaherbs, and the relation of heating to relevant environmental variables. We measured leaf and inflorescence temperature in six sub-Antarctic megaherb species on Campbell Island, latitude 52.3°S, New Zealand Biological Region. Using thermal imaging camera (Fluke TI20, http://www.fluke.com/fluke/caen/support/software/ti-update) and thermal probe (Fluke 51 II digital thermal probe), in combination with measurement of solar radiation, ambient air temperature, wind speed, wind chill and humidity.