Contramedidas en la suplantación de autoridades de certificación. Certificate pinning

La importancia de asegurar la comunicación entre personas ha crecido a medida que se ha avanzado en la sofisticación y el alcance de los mecanismos provistos para ello. Ahora, en la era digital, el alcance de estas comunicaciones es global y surge la necesidad de confiar en infraestructuras que suplan la imposibilidad de identificar a ambos extremos de la comunicación. Es la infraestructura de autoridades de certificación y la gestión correcta de certificados digitales la que ha facilitado una aproximación más eficiente para cubrir esta demanda. Existen, sin embargo, algunos aspectos de esta infraestructura o de la implementación de algunos de sus mecanismos que pueden ser aprovechados para vulnerar la seguridad que su uso debe garantizar. La presente investigación profundiza en alguno de estos aspectos y analiza la validez de las soluciones propuestas por grandes productores de software frente a escenarios realistas.

Optimization of Heat Treatment Profiles Applied to Nanometric-Scale Nb(3)Sn Wires With Cu-Sn Artificial Pinning Centers

Nb(3)Sn is one of the most used superconducting materials for applications in high magnetic fields. The improvement of the critical current densities (J(c)) is important, and must be analyzed together with the optimization of the flux pinning acting in the material. For Nb(3)Sn, it is known that the grain boundaries are the most effective pinning centers. However, the introduction of artificial pinning centers (APCs) with different superconducting properties has been proved to be beneficial for J(c). As these APCs are normally in the nanometric-scale, the conventional heat treatment profiles used for Nb(3)Sn wires cannot be directly applied, leading to excessive grain growth and/or increase of the APCs cross sections. In this work, the heat treatment profiles for Nb(3)Sn superconductor wires with Cu(Sn) artificial pinning centers in nanometric-scale were analyzed in an attempt to improve J(c) . It is described a methodology to optimize the heat treatment profiles in respect to diffusion, reaction and formation of the superconducting phases. Microstructural, transport and magnetic characterization were performed in an attempt to find the pinning mechanisms acting in the samples. It was concluded that the maximum current densities were found when normal phases (due to the introduction of the APCs) are acting as main pinning centers in the global behavior of the Nb(3)Sn superconducting wire.

Heat treatment influence on the superconducting properties of nanometric-scale Nb(3)Sn wires with Cu-Sn artificial pinning centers

Since the discovery of Nb(3)Sn superconductors many efforts have been expended to improve the transport properties in these materials. In this work, the heat treatment profiles for Nb(3)Sn superconductor wires with Cu(Sn) artificial pinning centers (APCs) with nanometric-scale sizes were analyzed in an attempt to improve the critical current densities and upper critical magnetic field. The methodology to optimize the heat treatment profiles in respect to the diffusion, reaction and formation of the superconducting phases is described. Microstructural characterization, transport and magnetic measurements were performed in an attempt to relate the microstructure to the pinning mechanisms acting in the samples. It was concluded that the maximum current densities occur due to normal phases (APCs) that act as the main pinning centers in the global behavior of the Nb(3)Sn superconducting wire. The APC technique was shown to be very powerful because it permitted mixing of the pinning mechanism. This achievement was not possible in other studies in Nb(3)Sn wires reported up to now.

Flux Pinning Optimization of MgB(2) Bulk Samples Prepared Using High-Energy Ball Milling and Addition of TaB(2)

MgB(2) is considered to be an important conductor for applications. Optimizing flux pinning in these conductors can improve their critical currents. Doping can influence flux pinning efficiency and grain connectivity, and also affect the resistivity, upper critical field and critical temperature. This study was designed to attempt the doping of MgB(2) on the Mg sites with metal-diborides using high-energy ball milling. MgB(2) samples were prepared by milling pre-reacted MgB(2) and TaB(2) powders using a Spex 8000M mill with WC jars and balls in a nitrogen-filled glove box. The mixing concentration in (Mg(1-x)Ta(x))B(2) was up to x = 0.10. Samples were removed from the WC jars after milling times up to 4000 minutes and formed into pellets using cold isostatic pressing. The pellets were heat treated in a hot isostatic press (HIP) at 1000 degrees C under a pressure of 30 kpsi for 24 hours. The influence that milling time and TaB(2) addition had on the microstructure and the resulting superconducting properties of TaB(2)-added MgB(2) is discussed. Improvement J(c) of at high magnetic fields and of pinning could be obtained in milled samples with added TaB(2) The sample with added 5at.% TaB(2) and milled for 300 minutes showed values of J(c) similar to 7 x 10(5) A/cm(2) and F(p) similar to 14 GN/m(3) at 2T, 4.2 K. The milled and TaB(2)-mixed samples showed higher values of mu(0)H(irr) than the unmilled-unmixed sample.

Artificial Pinning Center Studies in BI2212 Tapes and Bulks With Zirconium Oxide Inclusion

Zirconium oxide inclusion in Bi2212 superconducting tapes and bulks was studied as possible artificial pinning centers (APC). In order to analyze the zirconium oxide APC addition in Bi2212 samples, magnetization measurements were performed in bulks and transport properties measurements were performed on tapes. In magnetization measurements, the critical current densities are proportional to the width of the magnetization loop at each applied magnetic field. Addition of ZrO(2) in Bi2212 superconductors broadened the magnetization loop and enhanced the critical current densities at 4.2 K in bulks, as a clear indication that ZrO(2) addition improved the pinning and acted as APCs. In contrast, the transport critical current densities decreased in tapes.

Safety high accuracy Context-Aware Matrix (CAM) making based on X.509 proxy certificate

Human Computer Interaction (HCl) is to interaction between computers and each person. And context-aware (CA) is very important one of HCI composition. In particular, if there are sequential or continuous tasks between users and devices, among users, and among devices etc, it is important to decide the next action using right CA. And to take perfect decision we have to get together all CA into a structure. We define that structure is Context-Aware Matrix (CAM) in this article. However to make exact decision is too hard for some problems like low accuracy, overhead and bad context by attacker etc. Many researcher has been studying to solve these problems. Moreover, still it has weak point HCI using in safety. In this Article, we propose CAM making include best selecting Server in each area. As a result, moving users could be taken the best way.

Walk Leader certificate

The Walking for Health programme was established in 2001 and continues to be an integral part of Government policy to address the health and wellbeing of the population in Northern Ireland. The programme is delivered through HSC Trusts across Northern Ireland and is supported by the Public Health Agency. Walking for Health aims to encourage inactive people to increase their level of physical activity by participating in local led health walks.

Traitement des fractures de l'enfant par enclouage centro-médullaire élastique stable (ECMES) [Treatment of pediatric fractures by intramedullary stable elastic pinning]

During the past decade several new techniques for the treatment of children's fractures respecting the specificity of the growing bone have been described. The goal of all these techniques was to mechanically stabilise the fracture however to preserve a certain instability of the fracture gap itself inducing early callus formation and subsequent consolidation. The dynamic external fixation as well as the elastic stable intramedullary pinning have become accepted means in the treatment of long bone fractures in the paediatric age group. We report our experience of the last seven years with the intramedullary pinning of 105 fractures. Eighty-four were fractures of the femur, 9 of the humerus, 8 of the forearm, and a further 4 of the tibial shaft. The intramedullary elastic pinning represents a simple technique which supports or even enhances the natural process of fracture healing of the growing bone. The method is not very invasive, is cost effective, and allows short hospitalisation. Early physical activity is guaranteed due to early consolidation of the fracture. Complications are rare and the final orthopedic and cosmetic outcome is excellent.

Pinning of quantized vortices in helium drops by dopant atoms and molecules

Using a density functional method, we investigate the properties of liquid 4He droplets doped with atoms (Ne and Xe) and molecules ( SF6 and hydrogen cyanide). We consider the case of droplets having a quantized vortex pinned to the dopant. A liquid-drop formula is proposed that accurately describes the total energy of the complex and allows one to extrapolate the density functional results to large N. For a given impurity, we find that the formation of a dopant+vortex+4HeN complex is energetically favored below a critical size Ncr. Our results support the possibility to observe quantized vortices in helium droplets by means of spectroscopic techniques.

CDL Self-Certification and Medical Examiner’s Certificate Reporting, December 9, 2011

Starting Jan. 30, 2012, the Iowa Department of Transportation (DOT) will implement new federal regulations that require all CDL holders and applicants to certify the type of driving they do, and require interstate CDL holders that carry a Medical Examiner’s Certificate to give the Iowa DOT a copy of their certificate, produced by the Iowa Department of Transportation.

Completing the Revised Death Certificate,

The Iowa Office of the State Medical Examiner (IOSME) has received many questions regarding completion of the revised death certificate. This article addresses these common issues.

2010 Iowa Medicaid – Birth Certificate – Barriers to Prenatal Care Project Match Report Summary of Findings for Medicaid Reimbursed Births

The purpose of the fact sheet is to summarize the Iowa Barriers to Prenatal Care Project’s survey results for women with Medicaid reimbursed births during 2010. This information will be used to guide decision makers in implementing programs that improve the health outcomes of the women and infants who rely on Medicaid coverage.

Birth Certificate Match Report Comparison of Maternal Demographic Characteristics Medicaid vs. Non-Medicaid Reimbursed Births – 2010 Iowa Medicaid

The purpose of the fact sheet is to highlight the characteristics of Iowa women who gave birth in Iowa during calendar year 2010, with a focus on women with labor and delivery costs reimbursed by Medicaid compared to women with labor and delivery costs not reimbursed by Medicaid. This information will be used to guide decision makers in implementing programs that improve the health outcomes of the women and infants who rely on Medicaid coverage.