Períodos de interferência de Commelina benghalensis na cultura do café recém-plantada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Brachiaria decumbens supresses the initial growth of Coffea arabica

Brachiaria decumbens vem se tornando uma das plantas daninhas mais freqüentes na infestação de cafezais em formação, pois além de sua elevada agressividade e dificuldade de controle, está ocorrendo expansão das áreas cafeeiras para locais anteriormente ocupados por pastagens. Objetivou-se neste trabalho avaliar os efeitos desta planta daninha, em densidades crescentes, sobre o desenvolvimento inicial de mudas de café (Coffea arabica L. cv. Catuaí Amarelo). O experimento foi conduzido em condições semi-controladas, sem limitação de água. Uma muda de café foi transplantada em caixa de amianto com capacidade para 70 L, preenchida com terra coletada da camada arável de um Latossolo Vermelho. Os tratamentos constaram de diferentes densidades de transplante de capim-braquiária, a saber: 0, 4, 8, 12, 16, 20, 24, 36, 48 e 60 plantas m-2. O ensaio foi conduzido por um período experimental de 120 dias após o plantio (DAP). Todas as características analisadas foram afetadas negativamente pela interferência da planta daninha, mas as que se mostraram mais sensíveis a essa interferência foram à área foliar e a biomassa seca das folhas. Houve redução de 41,8% na área foliar do cafeeiro quando conviveu com o capim-braquiária a partir da densidade de 8 plantas m-2, chegando a 68,7% na densidade de 60 plantas m-2. Também a partir da densidade de 8 plantas m-2, a redução na biomassa seca das folhas em relação à testemunha foi de 41,4% e na densidade de 60 plantas m-2 chegou a 72,8%. Brachiaria decumbens, a partir da densidade de 8 plantas m-2, interfere negativamente sobre as mudas de café até os 120 DAP.

Efeito da densidade e da distância de caruru-de-mancha e amendoim-bravo na cultura do feijoeiro

O objetivo deste trabalho foi avaliar a interferência causada pelo caruru-demancha (Amaranthus viridis) e amendoim-bravo (Euphorbia heterophylla), em função das densidades e distâncias, no feijoeiro (Phaseolus vulgaris) cultivar Pérola. Como recipientes, foram utilizadas caixas de cimento-amianto, com capacidade para 50 litros, preenchidas com LatossoloVermelho-Escuro. As mudas foram formadas em bandejas de 128 células preenchidas com substrato hortícola; quando as plântulas atingiram o estádio V2, foram transplantadas para as caixas, sendo as de feijoeiro numa linha central, reproduzindo a semeadura em campo, e as das plantas daninhas nas densidades de 8, 16 e 32 plantas m-2, distanciadas de 0, 12 e 24 cm das plantas de feijão e igualmente entre si. O experimento foi conduzido no delineamento experimental de blocos casualizados, com os tratamentos dispostos em esquema fatorial 3x3+2T, com quatro repetições, constituindo as parcelas experimentais. Foram avaliadas características de crescimento e de produtividade da cultura e das plantas daninhas. Os dados obtidos foram submetidos à análise de variância pelo teste F, e as médias, comparadas pelo teste de Tukey. Observou-se que as plantas daninhas obtiveram maior desenvolvimento quando em maior distância da cultura. O caruru-de-mancha causou reduções no número de vagens e na produtividade estimada do feijoeiro. Para o caruru-de-mancha, o aumento da densidade só causou redução na produtividade da cultura quando as plantas estavam distanciadas em pelo menos 12 cm. A 0 cm, o feijoeiro tornou-se mais competitivo e não sofreu interferência das plantas daninhas, independentemente da densidade destas.

Nitrogen fertilization of fall panicum cultivars (Panicum dichotomiflorum Michx.): biochemical and agronomical aspects

São escassas as informações sobre cultivares melhoradas e técnicas culturais adequadas à cultura do painço. Este experimento objetivou avaliar o efeito da aplicação de níveis de nitrogênio (N) em cobertura no desenvolvimento e nos atributos bioquímicos de duas cultivares de painço. Para tanto, instalou-se um experimento em Botucatu (SP), em caixas de cimento amianto, mantidas em túnel plástico. O delineamento experimental foi em blocos casualizados, em esquema fatorial 2x6, com dois cultivares de painço (AL Mogi e AL Tibagi) e seis níveis de adubação nitrogenada (0, 40, 80, 120, 160 e 200 mg L-1), aplicada em cobertura, no início do perfilhamento. Os dois cultivares utilizados tiveram comportamento semelhante em relação às variáveis avaliadas, em resposta à aplicação de N em cobertura. A aplicação de doses de N na cultura do painço proporcionou incrementos nos teores relativos de clorofila, aminoácidos totais, nitrogênio total e altura das plantas, e redução dos teores de açúcares na matéria seca, até o intervalo entre 120 e 160 mg de N L-1. O perfilhamento e produção de grãos tiveram aumento linear com a aplicação de N. A adubação nitrogenada não afetou a produção de matéria seca.

Efeitos de diferentes manejos de água no estabelecimento de plantas de arroz no sistema pré-germinado

O trabalho objetivou avaliar o efeito de diferentes manejos de água adotados na semeadura do arroz (Oryza sativa L.), em sistema pré-germinado, no estabelecimento das plantas e nos componentes vegetativos. O experimento foi conduzido no ano agrícola de 1995/96 em caixas de cimento amianto com capacidade de 500 L, contendo solo Aluvial Eutrófico de várzea, na Fazenda Experimental Lageado, no Município de Botucatu, SP. A cultivar empregada foi a IAC 102, e os tratamentos foram sete manejos de água. A semeadura de sementes pré-germinadas em solo saturado ou em lâmina de água limpa ou turva e sua retirada três dias após, apresentaram resultados semelhantes quanto à população e ao estabelecimento das plantas. A retirada da lâmina de água três dias após a semeadura resultou em maior população e fixação de plantas do que a permanência da lâmina por período maior de sete dias. A manutenção da lâmina da água limpa ou turva afetou a população de plantas e prejudicou o seu desenvolvimento inicial, causando seu estiolamento com significativa redução da produção de matéria seca. A turvação da água antes da semeadura reduziu o desenvolvimento e a população de plantas quando a lâmina de água não foi eliminada por evaporação ou retirada três dias após a semeadura.

Efeito da densidade de plantas de Bracharia decumbens Stapf sobre o crescimento inicial de mudas de Eucalyptus grandis W. Hill ex Maiden

In order to verify the effect of Brachiaria decumbens plant density on the initial growth of Eucalyptus grandis plants, one assay was conducted under semi-controlled conditions of soil fertility and humidity. Dark red Latossol, collected from the arable layer, was used as substrate in 50 liters amianthus cement boxes. One seedling of Eucalyptus was planted in each box. Fifteen days later, seedlings of B. decumbens were transplanted on the same box. The treatments consisted of 0, 4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 60, 80, 100, and 120 plants of B. decumbens. The experimental design was the complete randomized design, with 15 treatments and four replicates. The Eucalyptus plants that lived with B. decumbens were evaluated for stem diameter, plant high, leaf area, and dry weight of stem, branches and leaves. B. decumbens plants were evaluated for dry weight of aerial parts. B. decumbens, at the density level of four plants per m 2 and over, reduced of the initial growth of the Eucalyptus plants. B. decumbens reduced on average 27.78% stem diameter, 18.47% plant high, 70.56% leaf number, 63.26% leaf area, and 55.22%, 77.29% and 55.30% of stem, branch and leaf dry weight, respectively. Plant high was not a good parameter to evaluate the B. decumbens interference.

Períodos de interferência de erva-quente (Spermacoce atifolia) no crescimento inicial de eucalipto (Eucalyptus grandis)

The buttonweed (Spermacoce latifolia) is becoming a plant among the most current infesting eucalypts plantation in State of São Paulo due to the continual use of same herbicides and control methods. Owing this, this work aimed to evaluate the effects of periods of company and control of S. Iatifolia on the initial growth of Eucalyptus grandis, planted in winter and summer. Only one seedling of Eucalyptus was planted in amianthus cement box and submitted for crescent periods of company and control of S. Iatifolia (0, 20, 60 and 80 days in competition or not). The densities of plants of S. Iatifolia were 4 and 16 plants per m 2 (under winner and summer conditions). The experimental period was 100 days after the planting (DAP). The experimental design for both experiments was the completely randomized blocks (CRB) with ten treatments and four replicates. The results of plant high, stem diameter, dries weights and leaf area showed that the before interference period (BIP), whole period of prevention for interference (WPPI) and critical period of prevention for interference (CPPI) were 40, 60, and 60 DAR, respectively, under winner conditions. Under summer conditions, the WPPI and CPPI were 20, 80 and 20 to 80 DAR.

Efeito da densidade de plantas de Panicum maximum Jacq. sobre o crescimento inicial de Eucalyptus grandis W.Hill ex Maiden

In order to verify the effect of Panicum maximum plant density on the initial growth of Eucalyptus grandis plants, one assay was conducted under semi-controlled conditions of soil fertility and humidity. Dark red Latossol, collected from the arable layer, was used as substrate in 50 liters amianthus cement boxes. One seedling of Eucalyptus was planted in each box. Fifteen days later, seedlings of P. maximum were transplanted on the same box. The treatments consisted of 0, 4, 8, 12, 16 and 20 plants of P. maximum per m 2. The experimental design was the complete randomized design, with six treatments and eight replicates for P. maximum. One hundred and ten and 190 days after transplanting, Eucalyptus plants grown among P. maximum showed an average reduction of 30.80 and 46.55% stem diameter, 25.10 and 22.50 plant high, 40.18 and 31.29% stem dry weight, 61.32 and 54.06% branch dry weight, 53.72 and 51.82% root dry weight, 44.62 and 38.50% leaf dry weight, 22.51 and 23.16 branch number, 20.72 and 19.97% leaf number, and 33.88 and 17.05% leaf area, respectively.

Effect of the density and of the distance of Brachiaria decumbens staff on the initial growth of Coffea arabica L. Seedligns

The aim of this work was to evaluate the interference of three densities (4, 8 and 16 plants/m 2) of Brachiaria decumbens Stapf distributed at three different distances (0, 10 and 20 cm from coffee plants) on the initial growth of Coffea arabica L. seedlings. Dark red Latosoil was used as substrate to fill up 70 liters cement boxes. Coffee seedlings at 15 cm height and 8 leaves stage were planted in each box. B. decumbens seedlings were transplanted when they reached two to four leaves stage. The experimental design was a randomized blocks with ten treatments and three replications. At the end of the experiment were measured, height, leaf number, leaf area, chlorophyll content and dry weight of coffee plants. Dry weight of B. decumbens leaves was also evaluated. The leaf area and leaf dry weight was shown to be more sensitive parameters to the interference of Brachiaria plants. Dry weight of coffee plants were reduced from 60% to 88% when the B. decumbens were transplanted 0 cm from the coffee plant. With distance of 10 cm the reduction of dry weight increased with the increase of the density of the B. decumbens. In the coexistence of the coffee plants with 16 plants/m 2 of B. decumbens, there was a reduction in the dry weight of about 80% at the distances of 0 and 20 cm. Regarding leaf area, the reduction was 47% on the average in the density of 4 plants/m 2 of B. decumbens The reduction in leaf area at other densities was higher at the distance of 0 and 20 cm, and 55% reduction was obtained at the distance of 10 cm.

Interferência do caruru-roxo no crescimento e na produtividade da pimenta dedo-de-moça

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Interplay Of Weak Interactions In The Atom-by-atom Condensation Of Xenon Within Quantum Boxes.

Condensation processes are of key importance in nature and play a fundamental role in chemistry and physics. Owing to size effects at the nanoscale, it is conceptually desired to experimentally probe the dependence of condensate structure on the number of constituents one by one. Here we present an approach to study a condensation process atom-by-atom with the scanning tunnelling microscope, which provides a direct real-space access with atomic precision to the aggregates formed in atomically defined 'quantum boxes'. Our analysis reveals the subtle interplay of competing directional and nondirectional interactions in the emergence of structure and provides unprecedented input for the structural comparison with quantum mechanical models. This approach focuses on-but is not limited to-the model case of xenon condensation and goes significantly beyond the well-established statistical size analysis of clusters in atomic or molecular beams by mass spectrometry.

Pulpotomies with portland cement in human primary molars

Two clinical cases in which Portland cement (PC) was applied as a medicament after pulpotomy of mandibular primary molars in children are presented. Pulpotomy using PC was carried out in two mandibular first molars and one mandibular second molar, which were further followed-up. At the 3, 6 and 12-month follow-up appointments, clinical and radiographic examinations of the pulpotomized teeth and their periradicular area revealed that the treatments were successful in maintaining the teeth asymptomatic and preserving pulpal vitality. Additionally, the formation of a dentin bridge immediately below the PC could be observed in the three molars treated. PC may be considered as an effective alternative for primary molar pulpotomies, at least in a short-term period. Randomized clinical trials with human teeth are required in order to determine the suitability of PC before unlimited clinical use can be recommended.

Comparasion of two minimally invasive methods on the longevity of glass ionomer cement restorations: short-term results of a pilot study

The purpose of this study was to evaluate the clinical performance of glass ionomer cement (GIC) restorations comparing two minimally invasive methods in permanent teeth after 12 months. Fifty pregnant women (second trimester of pregnancy), mean age 22 ± 5.30 years, were treated by two previously trained operators. The treatment approaches tested were: chemomechanical method (CarisolvTM; MediTeam) and atraumatic restorative treatment (ART). A split-mouth study design was used in which the two treatments were randomly placed in 50 matched pairs of permanent teeth. The chemomechanical method (CM) was the test group and the ART was the control group. The treatments were performed in Public Health Centers. The tested restorative material was a high-strength GIC (Ketac Molar; 3M/ESPE). The restorations were placed according to the ART guidelines. Two calibrated independent examiners evaluated the restorations in accordance with ART criteria. The inter-examiner kappa was 0.97. Data were analyzed using 95% confidence interval on the binomial distribution and Fisher's exact test at 5% significance level. In a 12-month follow-up, 86% of the restorations were evaluated. In the test group (CM), 100% (CI=93.3-100%) of the restorations were considered successful. In the control group (ART) 97.6% (CI=87.4-99.9%) of the restorations were considered successful and 2.4% unsuccessful (marginal defect >0.5 mm). There was no statistically significant difference between the 12-mounth success rate for both groups (Fisher's exact test: P=0.49) and between the two operators (Fisher's exact test: P=1.00). Both minimally invasive methods, chemomechanical method and ART, showed a similar clinical performance after 12 months of follow up.

Fluoride release profile of a nanofilled resin-modified glass ionomer cement

The present study aimed to compare the fluoride (F-) release pattern of a nanofilled resin-modified glass ionomer cement (GIC) (Ketac N100 - KN) with available GICs used in dental practice (resin-modified GIC - Vitremer - V; conventional GIC - Ketac Molar - KM) and a nanofilled resin composite (Filtek Supreme - RC). Discs of each material (n=6) were placed into 4 mL of deionized water in sealed polyethylene vials and shaken, for 15 days. F- release (μg F-/cm²) was measured each day using a fluoride-ion specific electrode. Cumulative F- release means were statistically analyzed by linear regression analysis. In order to analyze the differences among materials and the influence of time in the daily F- release, 2-way ANOVA test was performed (α=0.05). The linear fits between the cumulative F- release profiles of RC and KM and time were weak. KN and V presented a strong relationship between cumulative F- release and time. There were significant differences between the daily F- release overtime up to the third day only for GICs materials. The daily F- release means for RC were similar overtime. The results indicate that the F- release profile of the nanofilled resin-modified GIC is comparable to the resin-modified GIC.

Effect of cement type and water storage time on the push-out bond strength of a glass fiber post

This study investigated the effects of the cement type and the water storage time on the push-out bond strength of a glass fiber post. Glass fiber posts (Fibrekor, Jeneric Pentron) were luted to post spaces using a self-cured resin cement (C&B Cement [CB]), a glass ionomer cement (Ketac Cem [KC]) or a resin-modified glass ionomer cement (GC FujiCEM [FC]) according to the manufacturers’ instructions. For each luting agent, the specimens were exposed to one of the following water storage times (n=5): 1 day (T1), 7 days (T7), 90 days (T90) and 180 days (T180). Push-out tests were performed after the storage times. Control specimens were not exposed to water storage, but subjected to the push-out test 10 min after post cementation. Data (in MPa) were analyzed by Kruskal-Wallis and Dunn`s test (α=0.05). Cement type and water storage time had a significant effect (p<0.05) on the push-out bond strength. CB showed significantly higher values of retention (p<0.05) than KC and FC, irrespective of the water storage time. Water storage increased significantly the push-out bond strength in T7 and T90, regardless of the cement type (p<0.05). The results showed that fiber posts luted to post spaces with the self-cured resin cement exhibited the best bonding performance throughout the 180-day water storage period. All cements exhibited a tendency to increase the bond strength after 7 and 90 days of water storage, decreasing thereafter.