Interference rejection capabilities of different types of array antennas in cellular systems

The suitable use of array antennas in cellular systems results in improvement in the signal-to-interference ratio (StR), This property is the basis for introducing smart or adaptive antenna systems. in general, the SIR depends on the array configuration and is a function of the direction of the desired user and interferers. Here, the SIR performance for linear and circular arrays is analysed and compared.

De-hyping transmit diversity in modern MIMO cellular systems

A contemporary perspective on the tradeoff between transmit antenna diversity and spatial multi-plexing is provided. It is argued that, in the context of modern cellular systems and for the operating points of interest, transmission techniques that utilize all available spatial degrees of freedom for multiplexingoutperform techniques that explicitly sacrifice spatialmultiplexing for diversity. Reaching this conclusion, however, requires that the channel and some key system features be adequately modeled; failure to do so may bring about starkly different conclusions. As a specific example, this contrast is illustrated using the 3GPP Long-Term Evolution system design.

Optimal designs of collaborative relay-assisted multiuser beamforming for cellular systems

With careful calculation of signal forwarding weights, relay nodes can be used to work collaboratively to enhance downlink transmission performance by forming a virtual multiple-input multiple-output beamforming system. Although collaborative relay beamforming schemes for single user have been widely investigated for cellular systems in previous literatures, there are few studies on the relay beamforming for multiusers. In this paper, we study the collaborative downlink signal transmission with multiple amplify-and-forward relay nodes for multiusers in cellular systems. We propose two new algorithms to determine the beamforming weights with the same objective of minimizing power consumption of the relay nodes. In the first algorithm, we aim to guarantee the received signal-to-noise ratio at multiusers for the relay beamforming with orthogonal channels. We prove that the solution obtained by a semidefinite relaxation technology is optimal. In the second algorithm, we propose an iterative algorithm that jointly selects the base station antennas and optimizes the relay beamforming weights to reach the target signal-to-interference-and-noise ratio at multiusers with nonorthogonal channels. Numerical results validate our theoretical analysis and demonstrate that the proposed optimal schemes can effectively reduce the relay power consumption compared with several other beamforming approaches. © 2012 John Wiley & Sons, Ltd.

Uplink Performance of Conventional and Massive MIMO Cellular Systems with Delayed CSIT

This work studies the uplink of a cellular network with zero-forcing (ZF) receivers under imperfect channel state information at the base station. More specifically, apart from the pilot contamination, we investigate the effect of time variation of the channel due to the relative users' movement with regard to the base station. Our contributions include analytical expressions for the sum-rate with finite number of BS antennas, and also the asymptotic limits with infinite power and number of BS antennas, respectively. The numerical results provide interesting insights on how the user mobility degrades the system performance which extends previous results in the literature.

Computerised control of cellular manufacturing systems

This thesis reviews the existing manufacturing control techniques and identifies their practical drawbacks when applied in a high variety, low and medium volume environment. It advocates that the significant drawbacks inherent in such systems, could impair their applications under such manufacturing environment. The key weaknesses identified in the system were: capacity insensitive nature of Material Requirements Planning (MRP); the centralised approach to planning and control applied in Manufacturing Resources Planning (MRP IT); the fact that Kanban can only be used in repetitive environments; Optimised Productivity Techniques's (OPT) inability to deal with transient bottlenecks, etc. On the other hand, cellular systems offer advantages in simplifying the control problems of manufacturing and the thesis reviews systems designed for cellular manufacturing including Distributed Manufacturing Resources Planning (DMRP) and Flexible Manufacturing System (FMS) controllers. It advocates that a newly developed cellular manufacturing control methodology, which is fully automatic, capacity sensitive and responsive, has the potential to resolve the core manufacturing control problems discussed above. It's development is envisaged within the framework of a DMRP environment, in which each cell is provided with its own MRP II system and decision making capability. It is a cellular based closed loop control system, which revolves on single level Bill-Of-Materials (BOM) structure and hence provides better linkage between shop level scheduling activities and relevant entries in the MPS. This provides a better prospect of undertaking rapid response to changes in the status of manufacturing resources and incoming enquiries. Moreover, it also permits automatic evaluation of capacity and due date constraints and hence facilitates the automation of MPS within such system. A prototype cellular manufacturing control model, was developed to demonstrate the underlying principles and operational logic of the cellular manufacturing control methodology, based on the above concept. This was shown to offer significant advantages from the prospective of operational planning and control. Results of relevant tests proved that the model is capable of producing reasonable due date and undertake automation of MPS. The overall performance of the model proved satisfactory and acceptable.

Protein aggregation containing beta-amyloid, alpha-synuclein and hyperphosphorylated tau in cultured cells of hippocampus, substantia nigra and locus coeruleus after rotenone exposure

Background: Protein aggregates containing alpha-synuclein, beta-amyloid and hyperphosphorylated tau are commonly found during neurodegenerative processes which is often accompanied by the impairment of mitochondrial complex I respiratory chain and dysfunction of cellular systems of protein degradation. In view of this, we aimed to develop an in vitro model to study protein aggregation associated to neurodegenerative diseases using cultured cells from hippocampus, locus coeruleus and substantia nigra of newborn Lewis rats exposed to 0.5, 1, 10 and 25 nM of rotenone, which is an agricultural pesticide, for 48 hours. Results: We demonstrated that the proportion of cells in culture is approximately the same as found in the brain nuclei they were extracted from. Rotenone at 0.5 nM was able to induce alpha-synuclein and beta amyloid aggregation, as well as increased hyperphosphorylation of tau, although high concentrations of this pesticide (over 1 nM) lead cells to death before protein aggregation. We also demonstrated that the 14kDa isoform of alpha-synuclein is not present in newborn Lewis rats. Conclusion: Rotenone exposure may lead to constitutive protein aggregation in vitro, which may be of relevance to study the mechanisms involved in idiopathic neurodegeneration.

A simulation-based evolutionary multiobjective approach to manufacturing cell formation

The purpose of this paper is to propose a multiobjective optimization approach for solving the manufacturing cell formation problem, explicitly considering the performance of this said manufacturing system. Cells are formed so as to simultaneously minimize three conflicting objectives, namely, the level of the work-in-process, the intercell moves and the total machinery investment. A genetic algorithm performs a search in the design space, in order to approximate to the Pareto optimal set. The values of the objectives for each candidate solution in a population are assigned by running a discrete-event simulation, in which the model is automatically generated according to the number of machines and their distribution among cells implied by a particular solution. The potential of this approach is evaluated via its application to an illustrative example, and a case from the relevant literature. The obtained results are analyzed and reviewed. Therefore, it is concluded that this approach is capable of generating a set of alternative manufacturing cell configurations considering the optimization of multiple performance measures, greatly improving the decision making process involved in planning and designing cellular systems. (C) 2010 Elsevier Ltd. All rights reserved.

Spatiotemporal mechanisms for actomyosin ring assembly and contraction in budding yeast cell division

Dissertation presented to obtain the Ph.D degree in Molecular Medicine

Frequency-domain receiver design for doubly-selective channels

This work is devoted to the broadband wireless transmission techniques, which are serious candidates to be implemented in future broadband wireless and cellular systems, aiming at providing high and reliable data transmission and concomitantly high mobility. In order to cope with doubly-selective channels, receiver structures based on OFDM and SC-FDE block transmission techniques, are proposed, which allow cost-effective implementations, using FFT-based signal processing. The first subject to be addressed is the impact of the number of multipath components, and the diversity order, on the asymptotic performance of OFDM and SC-FDE, in uncoded and for different channel coding schemes. The obtained results show that the number of relevant separable multipath components is a key element that influences the performance of OFDM and SC-FDE schemes. Then, the improved estimation and detection performance of OFDM-based broadcasting systems, is introduced employing SFN (Single Frequency Network) operation. An initial coarse channel is obtained with resort to low-power training sequences estimation, and an iterative receiver with joint detection and channel estimation is presented. The achieved results have shown very good performance, close to that with perfect channel estimation. The next topic is related to SFN systems, devoting special attention to time-distortion effects inherent to these networks. Typically, the SFN broadcast wireless systems employ OFDM schemes to cope with severely time-dispersive channels. However, frequency errors, due to CFO, compromises the orthogonality between subcarriers. As an alternative approach, the possibility of using SC-FDE schemes (characterized by reduced envelope fluctuations and higher robustness to carrier frequency errors) is evaluated, and a technique, employing joint CFO estimation and compensation over the severe time-distortion effects, is proposed. Finally, broadband mobile wireless systems, in which the relative motion between the transmitter and receiver induces Doppler shift which is different or each propagation path, is considered, depending on the angle of incidence of that path in relation to the direction of travel. This represents a severe impairment in wireless digital communications systems, since that multipath propagation combined with the Doppler effects, lead to drastic and unpredictable fluctuations of the envelope of the received signal, severely affecting the detection performance. The channel variations due this effect are very difficult to estimate and compensate. In this work we propose a set of SC-FDE iterative receivers implementing efficient estimation and tracking techniques. The performance results show that the proposed receivers have very good performance, even in the presence of significant Doppler spread between the different groups of multipath components.

Is the PHY layer dead?

This article originates from a panel with the above title, held at IEEE VTC Spring 2009, in which the authors took part. The enthusiastic response it received prompted us to discuss for a wider audience whether research at the physical layer (PHY) is still relevant to the field of wireless communications. Using cellular systems as the axis of our exposition, we exemplify areas where PHY research has indeed hit a performance wall and where any improvements are expected to be marginal. We then discuss whether the research directions taken in the past have always been the right choice and how lessons learned could influence future policy decisions. Several of the raised issues are subsequently discussed in greater details, e.g., the growing divergence between academia and industry. With this argumentation at hand, we identify areas that are either under-developed or likely to be of impact in coming years - hence corroborating the relevance and importance of PHY research.

Estudi del procés de neurodegeneració

Les anomenades malalties neurodegeneratives tenen una simptomatologia i unes manifestacions clíniques molt diferents entre elles. No obstant, totes elles convergeixen en el mateix procés final, la neurodegeneració, que es manifestarà en diferents localitzacions o tipus cel·lulars del sistema nerviós. Nosaltres, plantegem la hipòtesi de que els processos moleculars i cel·lulars subjacents a la neurodegeneració són comuns per totes elles. Després de dur a terme un procés de selecció, es decideix treballar amb la malaltia de Parkinson, la d’Alzheimer, l’Esclerosi lateral amiotròfica i l’esclerosi múltiple. Hem pogut determinar que hi ha set processos moleculars o cel·lulars que estan associats al procés de neurodegeneració i que són comuns a totes elles. Havent-les estudiat per separat s’observa que el procés de neurodegeneració consisteix en una fallada en cadena de diferents sistemes moleculars i cel·lulars que tenen com a punt d’origen l’estrès oxidatiu. A aquest estrès s’hi pot arribar de diferents maneres. Una d’elles és l’exposició excessiva a certs metalls, que provoca la pèrdua dels sistemes antioxidants cel·lulars. Degut a això, els mitocondris reben un impacte oxidatiu massa gran i comencen a fallar. El fet que aquest orgànul actuï com a tampó del calci intracel·lular en provoca la seva desregulació, alterant d’aquesta manera el senyal nerviós. En resposta a l’estrès oxidatiu i tèrmic que genera la disfunció mitocondrial, s’activen les Proteïnes de Xoc Tèrmic (HSP) que actuant de citocines i presentadores d’antígens, inicien la resposta immunològica contra les cèl·lules danyades. Paral·lelament, s’observa un increment de la permeabilitat de la barrera hematoencefàlica degut a la pèrdua de les adhesions cel·lulars estretes per l’alta presència d’espècies reactives. Com a conseqüència de l’afebliment o el trencament de la barrera hematoencefàlica, es pot produir una entrada al SNC de diferents substàncies neurotòxiques i de cèl·lules del sistema immunitàri que, en condicions normals tenen l’accés restringit. Juntament amb aquestes cèl·lules immunològiques, també s’activen les cèl·lules del sistema immunitari innat residents al cervell, la micròglia, i totes elles secreten citocines proinflamatòries que contribueixen al procés de neurodegeneració. Nosaltres presentem els mecanismes pels quals aquesta inflamació, lluny d’atenuar-se, es cronifica per l’acció de certs bucles de retroalimentació positiva. Les diferents peculiaritats de cada malaltia contribueixen en aquest procés de diferents maneres, com és el cas dels pèptids β-amilides en la malaltia d’Alzheimer, l’α-sinucleina en el Parkinson, la superòxid dismutasa (SOD) en l’esclerosi lateral amiotròfica, o l’infiltració de leucòcits al cervell degut a la resposta autoimmune de l’esclerosi múltiple.Deixant de banda aquestes diferències, si el procés és comú entre totes elles, l’estudi a fons d’aquest procés hauria de poder permetre identificar dianes tarapèutiques que siguin comunes per les quatre malalties.

Étude du mécanisme d’augmentation de la relâche virale par la protéine Vpu du VIH-1

Les différentes protéines accessoires du VIH-1, l’agent étiologique du SIDA, optimisent la réplication et la propagation du virus in vivo. Parmi ces dernières figure Vpu, l’antagoniste du facteur de restriction nommé Tetherin qui prévient la relâche des particules virales à partir de la surface de cellules infectées. En diminuant son expression de surface, Vpu prévient l’incorporation de ce facteur de restriction dans la particule virale en formation et conséquemment, empêche la formation d’une ancre protéique reliant le virus mature à la membrane plasmique de la cellule infectée. La mécanistique sous-jacente n’était cependant pas connue. Cette présente thèse relate nos travaux exécutés afin d’élucider la dynamique des mécanismes cellulaires responsables de cet antagonisme. Une approche de mutagénèse dirigée a d’abord permis d’identifier deux régions contenant des déterminants de la localisation de Vpu dans le réseau trans-Golgi (RTG), puis de démontrer la relation existante entre cette distribution et l’augmentation de la relâche des particules virales. Des expériences subséquentes de marquage métabolique suivi d’une chasse exécutées dans des systèmes cellulaires où Tetherin est exprimée de façon endogène ont suggéré le caractère dispensable de l’induction par Vpu de la dégradation du facteur de restriction lors de son antagonisme. En revanche, une approche de réexpression de Tetherin conduite en cytométrie en flux, confirmée en microscopie confocale, a mis en évidence une séquestration de Tetherin dans le RTG en présence de Vpu, phénomène qui s’est avéré nécessiter l’interaction entre les deux protéines. L’usage d’un système d’expression de Vpu inductible conjugué à des techniques de cytométrie en flux nous a permis d’apprécier l’effet majeur de Vpu sur la Tetherin néo-synthétisée et plus mineur sur la Tetherin de surface. En présence de Vpu, la séquestration intracellulaire de la Tetherin néo-synthétisée et la légère accélération de l’internalisation naturelle de celle en surface se sont avérées suffisantes à la réduction de son expression globale à la membrane plasmique et ce, à temps pour l’initiation du processus de relâche virale. À la lumière de nos résultats, nous proposons un modèle où la séquestration de la Tetherin néo-synthétisée dans le RTG préviendrait le réapprovisionnement de Tetherin en surface qui, combinée avec l’internalisation naturelle de Tetherin à partir de la membrane plasmique, imposerait l’établissement d’un nouvel équilibre de Tetherin incompatible avec une restriction de la relâche des particules virales. Cette thèse nous a donc permis d’identifier un processus par lequel Vpu augmente la sécrétion de virus matures et établit une base mécanistique nécessaire à la compréhension de la contribution de Vpu à la propagation et à la pathogénèse du virus, ce qui pourrait mener à l’élaboration d’une stratégie visant à contrer l’effet de cette protéine virale.

“Reconstruction of Gene Regulatory Network from Expression Profile of Plasma RNA Data of Colorectal Cancer Patients using Soft Computing Techniques”

Microarray data analysis is one of data mining tool which is used to extract meaningful information hidden in biological data. One of the major focuses on microarray data analysis is the reconstruction of gene regulatory network that may be used to provide a broader understanding on the functioning of complex cellular systems. Since cancer is a genetic disease arising from the abnormal gene function, the identification of cancerous genes and the regulatory pathways they control will provide a better platform for understanding the tumor formation and development. The major focus of this thesis is to understand the regulation of genes responsible for the development of cancer, particularly colorectal cancer by analyzing the microarray expression data. In this thesis, four computational algorithms namely fuzzy logic algorithm, modified genetic algorithm, dynamic neural fuzzy network and Takagi Sugeno Kang-type recurrent neural fuzzy network are used to extract cancer specific gene regulatory network from plasma RNA dataset of colorectal cancer patients. Plasma RNA is highly attractive for cancer analysis since it requires a collection of small amount of blood and it can be obtained at any time in repetitive fashion allowing the analysis of disease progression and treatment response.

Biofilmbildung bei Pflanzen-assoziierten Bakterien der Gattung Methylobacterium und molekulargenetisch-physiologische Charakterisierung eines neuen Marchantia-Isolats (Mtb. sp. JT1)

Bakterien existieren bevorzugt in Biofilmen. Das Zusammenleben in diesen Gemeinschaften bietet den einzelnen Mikroben einen wirksamen Schutz und ermöglicht die Ausbildung langfristiger, synergistischer Wechselwirkungen, die mit multizellulären Systemen verglichen werden können. Biofilme bestehen aus Mikrooganismen-Populationen, die sich an Grenzflächen ansammeln und typischerweise von einer Matrix aus extrazellulären polymeren Substanzen umgeben sind. Auch auf Pflanzen-Oberflächen bilden viele Bakterien Biofilme, um ihre Überlebenswahrscheinlichkeit zu erhöhen. In dieser Arbeit wurde die Biofilmbildung bei Pflanzen-assoziierten Bakterien der Gattung Methylobacterium (Mtb.) untersucht, wobei molekular- und mikrobiologische sowie mikroskopische Techniken eingesetzt wurden. Es zeigte sich, dass alle untersuchten Vertreter der Gattung Methylobacterium in unterschiedlichem Ausmaß Biofilme bilden. Die Ausprägung ist dabei Taxon (bzw. Isolat)-spezifisch und vor allem von der Stickstoff-Verfügbarkeit abhängig. Jedoch spielen auch andere Umweltfaktoren, wie die Versorgung der Zellen mit Phosphat und die Zelldichte, bei der Ausbildung der überzellulären Einheiten eine wichtige Rolle. Die Matrix der Biofilme wird meist durch ein fibrilläres Netzwerk gebildet. Dabei handelt es sich um Heteropolysaccharide, die von den Bakterien synthetisiert und sezerniert werden. Einige Isolate bilden zusätzlich zahlreiche Fimbrien (Auswüchse), durch die sie an andere Zellen oder Oberflächen binden können. Im zweiten Teil dieser Arbeit wurden mehrere neue Methylobacterium-Isolate physiologisch und molekulargenetisch charakterisiert (Nährstoffverwertung, DNA-Sequenzen verschiedener Gene, phylogenetische Analysen usw.). Im Vordergrund stand hierbei der von einer urtümlichen Landpflanze, dem Lebermoos (Marchantia polymorpha), isolierte Stamm Mtb. sp. JT1. Dabei zeigten sich deutliche Unterschiede in der Morphologie und Physiologie des Bakterienstamms JT1 und dem nahe verwandten Stamm 5b.2.20 zu den bereits beschriebenen Taxa der Gattung, so dass eine Spezies-Neubeschreibung erforderlich war. Als Artname wurde aufgrund der außergewöhnlichen Oberflächenstrukturen Mtb. fimbriae sp. nov. eingeführt. Auch andere Methylobakterien (unter anderem Isolat Mtb. sp. F3.2, isoliert vom Laubmoos Funaria hygrometrica) stellen wahrscheinlich Vertreter einer neue Spezies dar (Artname Mtb. funariae sp. nov.). Jedoch zeigen Mtb. fimbriae und Mtb. funariae nur geringe physiologische und morphologische Unterschiede und konnten auf Grundlage umfassender DNA-DNA-Hybridisierungs-Studien nicht eindeutig voneinander abgegrenzt werden.