Determination of chitin content in fungal cell wall: an alternative flow cytometric method

The conventional methods used to evaluate chitin content in fungi, such as biochemical assessment of glucosamine release after acid hydrolysis or epifluorescence microscopy, are low throughput, laborious, time-consuming, and cannot evaluate a large number of cells. We developed a flow cytometric assay, efficient, and fast, based on Calcofluor White staining to measure chitin content in yeast cells. A staining index was defined, its value was directly related to chitin amount and taking into consideration the different levels of autofluorecence. Twenty-two Candida spp. and four Cryptococcus neoformans clinical isolates with distinct susceptibility profiles to caspofungin were evaluated. Candida albicans clinical isolate SC5314, and isogenic strains with deletions in chitin synthase 3 (chs3Δ/chs3Δ) and genes encoding predicted Glycosyl Phosphatidyl Inositol (GPI)-anchored proteins (pga31Δ/Δ and pga62Δ/Δ), were used as controls. As expected, the wild-type strain displayed a significant higher chitin content (P < 0.001) than chs3Δ/chs3Δ and pga31Δ/Δ especially in the presence of caspofungin. Ca. parapsilosis, Ca. tropicalis, and Ca. albicans showed higher cell wall chitin content. Although no relationship between chitin content and antifungal drug susceptibility phenotype was found, an association was established between the paradoxical growth effect in the presence of high caspofungin concentrations and the chitin content. This novel flow cytometry protocol revealed to be a simple and reliable assay to estimate cell wall chitin content of fungi.

Impact of multi-metals (Cd, Pb and Zn) exposure on the physiology of the yeast Pichia kudriavzevii

Metal contamination of the environment is frequently associated to the presence of two or more metals. This work aimed to study the impact of a mixture of metals (Cd, Pb and Zn) on the physiology of the non-conventional yeast Pichia kudriavzevii. The incubation of yeast cells with 5 mg/l Cd, 10 mg/l Pb and 5 mg/l Zn, for 6 h, induced a loss of metabolic activity (assessed by FUN-1 staining) and proliferation capacity (evaluated by a clonogenic assay), with a small loss of membrane integrity (measured by trypan blue exclusion assay). The staining of yeast cells with calcofluor white revealed that no modification of chitin deposition pattern occurred during the exposure to metal mixture. Extending for 24 h, the exposure of yeast cells to metal mixture provoked a loss of membrane integrity, which was accompanied by the leakage of intracellular components. A marked loss of the metabolic activity and the loss of proliferation capacity were also observed. The analysis of the impact of a single metal has shown that, under the conditions studied, Pb was the metal responsible for the toxic effect observed in the metal mixture. Intracellular accumulation of Pb seems to be correlated with the metals' toxic effects observed.

Filamentous fungi in free water and biofilms from Brazilian drinking water systems

In some regions of Brazil, especially where the water is scarce, drinking water is stored in water storage tanks. This practice gives the consumer the guarantee of available water. The water storage conditions such as the exposure to hot weather when the tanks are on rooftops allow the development of microorganisms and microbial biofilms which can deteriorate the water quality and increase the risk to human health [1,2]. This study describes the filamentous fungi (FF) detected in free water and biofilms in drinking water storage tanks in Recife - Pernambuco, Brazil. Five sampling times in triplicate were performed at two distinct points. Colony-forming units (CFU) of FF fungi were determined with 0.45 µm filtration membranes using peptone glucose rose Bengal agar (PGRBA). From the 30 samples analysed a total of 1136 CFU were obtained. The water biofilms were collected from samplers consisting of polyethylene coupons, previously installed in the reservoirs. These coupons were transferred to PGRBA plates and incubated using with the same conditions described for free FF. For the in situ detection of FF in biofilms the Calcofluor White staining technique was used. This procedure demonstrated FF forming biofilms on the surfaces of the coupons. Brazilian legislation does not define limits for FF in drinking water. However considering the potential risk of fungal contamination, the data obtained in this study will contribute to developing future quantitative and qualitative parameters for the presence of fungi in drinking water distribution systems in Brazil. [1] HageskaL, G, Lima, N, Skaar, I. The study of fungi in drinking water. Mycological Research, 113, 2009, 165-172. [2] Skaar I, Hageskal G. Fungi in Drinking Water. In.: Paterson RRM, Lima N. (Eds.) Molecular Biology of Food and Water Borne Mycotoxigenic and Mycotic Fungi. CRC Press, Taylor & Francis Group, Boca Raton, 2015, 597-606.

Effect of fetal bovine serum on Candida glabrata cultures

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Engenharia Clínica)

The impact of carbon source in Candida albicans virulence: participation of RLM1 in pathogen host interaction

Dissertação de mestrado em Genética Molecular

Filamentous fungi occurrence in free water and biofilms from drinking water storage tanks

In some regions of Brazil, especially where the water is scarce, drinking water is stored in water storage tanks. This practice gives the consumer the guarantee of available water. The water storage conditions such as the exposure to hot weather when the tanks are on rooftops allow the development of microorganisms and microbial biofilms which can deteriorate the water quality and increase the risk to human health [1,2]. This study describes the filamentous fungi (FF) detected in free water and biofilms in drinking water storage tanks in Recife - Pernambuco, Brazil. Five sampling times in triplicate were performed at two distinct points. Colony-forming units (CFU) of FF fungi were determined with 0.45 μm filtration membranes using peptone glucose rose Bengal agar (PGRBA). From the 30 samples analysed a total of 1136 CFU were obtained. The water biofilms were collected from samplers consisting of polyethylene coupons, previously installed in the reservoirs. These coupons were transferred to PGRBA plates and incubated using with the same conditions described for free FF. For the in situ detection of FF in biofilms the Calcofluor White staining technique was used. This procedure demonstrated FF forming biofilms on the surfaces of the coupons. Brazilian legislation does not define limits for FF in drinking water. However considering the potential risk of fungal contamination, the data obtained in this study will contribute to developing future quantitative and qualitative parameters for the presence of fungi in drinking water distribution systems in Brazil.

CHARACTERISATION OF ARABIDOPSIS THALIANA PERMEABLE CUTICLE MUTANTS SHOWING A STRONG RESISTANCE TO BOTRYTIS CINEREA

La cuticule des plantes, composée de cutine, un polyester lipidique complexe et de cires cuticulaires, couvre l'épiderme de la plupart des parties aériennes des plantes. Elle est constituée d'une barrière hydrophobique primaire qui minimise les pertes en eau et en soluté et protège l'organisme de différents stress environnementaux tels que les rayons UV, la dessiccation et l'infection par des pathogènes. Elle est aussi impliquée dans la délimitation des organes durant le développement. La cutine est un polyester qui, dans la plupart des espèces végétales, est principalement composé d'acides gras ω-hydroxylés composé de 16 à 18 carbones. Cependant, la cutine des feuilles d'Arabidopsis a une composition différente et est principalement constituée d'acides dicarboxyliques à 16-18 carbones. Les cires sont présentes dans le polyester de la cutine ou le recouvrent. Chez Arabidopsis, un nombre de mutants, tel que 1er, bdg, hth, att1, wbc11, et des plantes transgéniques avec différents changement dans la structure de la cuticule dans les feuilles et la tige, ont récemment été décrits et servent d'outils pour étudier la relation entre la structure et la fonction de la cuticule.7 mutants d'Arabidopsis ont été isolés par une méthode de coloration qui permet de détecter une augmentation dans la perméabilité cuticulaire. Ces mutants ont été appelés pec pour permeable cuticle.Pour la première partie de mon projet, j'ai principalement travaillé avec pec9/bre1 (permeable cuticle 9/botrytis resistance 1). PEC9/BRE1 a été identifié comme étant LACS2 (LONG CHAIN ACYL-CoA SYNTHETASE 2). Dans ce mutant, la cuticule n'est pas visible sous microscopie électronique et la quantité en acides gras omega- hydroxylés et en leurs dérivés est fortement réduite. Ces altérations conduisent à une plus grande perméabilité de la cuticule qui est mise en évidence par une plus grande sensibilité à la sécheresse et aux xénobiotiques et une coloration plus rapide par bleu de toluidine. Le mutant Iacs2 démontre aussi une grande capacité de résistance à l'infection du champignon nécrotrophique B. cinerea. Cette résistance est due à l'extrusion sur les feuilles d'un composé antifongique durant l'infection. Ce travail a été publié dans EMBO journal (Bessire et al., 2007, EMBO Journal).Mon second projet était principalement concentré sur pec1, un autre mutant isolé par le premier crible. La caractérisation de pec1 a révélé des phénotypes similaires à ceux de Iacs2, mais à chaque fois dans des proportions moindres : sensibilité accrue à la sécheresse et aux herbicides, plus grande perméabilité au bleu de toluidine et au calcofluor white, altération de la structure cuticulaire et résistance à B. cinerea à travers la même activité antifongique. PEC1 a été identifié comme étant AtPDR4. Ce gène code pour un transporteur ABC de la famille PDR ("Pleiotropic Drugs Resistance") qui sont des transporteurs ayants un large spectre de substrats. Le mutant se différencie de Iacs2, en cela que la composition en acides gras de la cuticule n'est pas autant altérée. C'est principalement le dihydroxypalmitate des fleurs dont la quantité est réduite. L'expression du gène marqué avec une GFP sous le contrôle du promoteur endogène a permis de localiser le transporteur au niveau de la membrane plasmique des cellules de l'épiderme, de manière polaire. En effet, la protéine est principalement dirigée vers l'extérieure de la plante, là où se trouve la cuticule, suggérant une implication d'AtPDR4 dans le transport de composants de la cuticule. Ce travail est actuellement soumis à Plant Cell.Une étude phylogénétique a aussi montré qu'AtPDR4 était très proche d'OsPDR6 du riz. Le mutant du riz a d'ailleurs montré des phénotypes de nanisme et de perméabilité similaire au mutant chez Arabidopsis.AbstractThe cuticle, consisting principally of cutin and cuticular waxes, is a hydrophobic layer of lipidic nature, which covers all aerial parts of plants and protects them from different abiotic and biotic stresses. Recently, the research in this area has given us a better understanding of the structure and the formation of the cuticle. The Arabidopsis mutants permeable cuticle 1 (peel) and botrytis resistance 1 (brel) were identified in two screens to identify permeable cuticles. The screens used the fluorescent dye calcofluor to measure permeability and also resistance to the fungal pathogen Botrytis. These mutants have highly permeable cuticle characteristics such as higher water loss, intake of chemicals through the cuticle, higher resistance to Botrytis cinerea infection, and organ fusion.BRE1 was cloned and found to be LACS2, a gene previously identified which is important in the formation and biosynthetic pathway of the cuticle. In brel, the amount of the major component of cutin in Arabidopsis leaves and stems, dicarboxylic acids, is five times lower than in the wild type. Moreover, the permeability of the cuticle allows the release of antifungal compounds at the leaf surface that inhibits the growth of two necrotrophic fungi: Botrytis cinerea and Sclerotinia sclerotiorum.PEC1 was identified as AtPDR4, a gene that codes for a plasma membrane transporter of the Pleiotropic Drug Resistance family, a sub-family of the ABC- transporters. AtPDR4 is strongly expressed in the epidermis of expanding tissues. In the epidermis it is located in a polar manner on the external plasma membrane, facing the cuticle. Analysis of the monomer composition of the cutin reveals that in this mutant the amount of hydroxy-acids and dihydroxy-palmitate is 2-3 times lower in flowers, in which organ these cutin monomers are the major components. Thus AtPDR4 is thought to function as a putative cutin monomer transporter.

Terbinafine inhibits Cryptococcus neoformans growth and modulates fungal morphology

Cryptococcus neoformans is an encapsulated fungus that causes cryptococcosis. Central nervous system infection is the most common clinical presentation followed by pulmonary, skin and eye manifestations. Cryptococcosis is primarily treated with amphotericin B (AMB), fluconazole (FLC) and itraconazole (ITC). In the present work, we evaluated the in vitro effect of terbinafine (TRB), an antifungal not commonly used to treat cryptococcosis. We specifically examined the effects of TRB, either alone or in conjunction with AMB, FLC and ITC, on clinical C. neoformans isolates, including some isolates resistant to AMB and ITC. Broth microdilution assays showed that TRB was the most effective drug in vitro. Antifungal combinations demonstrated synergism of TRB with AMB, FLC and ITC. The drug concentrations used for the combination formulations were as much as 32 and 16-fold lower than the minimum inhibitory concentration (MIC) values of FLC and AMB alone, respectively. In addition, calcofluor white staining revealed the presence of true septa in hyphae structures that were generated after drug treatment. Ultrastructural analyses demonstrated several alterations in response to drug treatment, such as cell wall alterations, plasma membrane detachment, presence of several cytoplasmic vacuoles and mitochondrial swelling. Therefore, we believe that the use of TRB alone or in combination with AMB and azoles should be explored as an alternative treatment for cryptococcosis patients who do not respond to standard therapies.

Calcineurin A of Candida albicans: involvement in antifungal tolerance, cell morphogenesis and virulence.

The azole antifungal fluconazole possesses only fungistatic activity in Candida albicans and, therefore, this human pathogen is tolerant to this agent. However, tolerance to fluconazole can be inhibited when C. albicans is exposed to fluconazole combined with the immunosuppressive drug cyclosporin A, which is known to inhibit calcineurin activity in yeast. A mutant lacking both alleles of a gene encoding the calcineurin A subunit (CNA) lost viability in the presence of fluconazole, thus making calcineurin essential for fluconazole tolerance. Consistent with this observation, tolerance to fluconazole was modulated by calcium ions or by the expression of a calcineurin A derivative autoactivated by the removal of its C-terminal inhibitory domain. Interestingly, CNA was also essential for tolerance to other antifungal agents (voriconazole, itraconazole, terbinafine, amorolfine) and to several other metabolic inhibitors (caffeine, brefeldin A, mycophenolic acid, fluphenazine) or cell wall-perturbing agents (SDS, calcofluor white, Congo red), thus indicating that the calcineurin pathway plays an important role in the survival of C. albicans in the presence of external growth inhibitors. Several genes, including PMC1, a vacuolar calcium P-type ATPase, were regulated in a calcineurin- and fluconazole-dependent manner. However, PMC1 did not play a direct role in the survival of C. albicans when exposed to fluconazole. In addition to these different properties, calcineurin was found to affect colony morphology in several media known to modulate the C. albicans dimorphic switch. In particular, calcineurin was found to be essential for C. albicans viability in serum-containing media. Finally, calcineurin was found to be necessary for the virulence of C. albicans in a mice model of infection, thus making calcineurin an important element for adequate adaptation to the conditions of the host environment.

Spezifität der quantitativen Resistenz von Blättern und Früchten der Tomate (Lycopersicon ssp. L.) gegenüber Phytophthora infestans (Mont.) de Bary.

Ziel der vorliegenden Arbeit war es, einen Beitrag zur Resistenzforschung bei Tomaten gegenüber P. infestans zu leisten, um erste Grundlagen für eine mögliche Züchtungsstrategie auf Basis unterschiedlicher quantitativer Resistenzen zu erarbeiten. Hierzu wurde untersucht, inwieweit unterschiedliche qualitative und quantitative Resistenzen bei Tomatenblättern und -früchten vorliegen, und ob hierfür verantwortliche Mechanismen identifiziert werden können. Zudem wurde untersucht, ob isolatspezifische quantitative Resistenzen identifiziert werden können. Zu diesem Zweck wurde mit einer erweiterten Clusteranalyse, basierend auf einer modifizierten Sanghvi-T2 Distanz, ein statistisches Verfahren entwickelt, welches die Identifikation von quantitativen, isolatspezifischen Resistenzen unter der Berücksichtigung der Variabilität ermöglicht. Des weiteren wurde geprüft, inwieweit zwischen den Resistenzausprägungen auf dem Blatt und den Resistenzausprägungen auf der Frucht ein Zusammenhang besteht und inwieweit die im Labor beobachteten Resistenzen unter Freilandbedingungen eine Rolle spielen. Im Labortest wurde die qualitative und quantitative Blattresistenz von 109 Akzessionen aus elf Lycopersicon und Solanum Arten gegenüber zwölf unterschiedlich aggressiven und teilweise auch unterschiedlich virulenten P. infestans Isolaten untersucht (Kap. 3). Die Früchte von 38 Tomatensorten wurden auf ihre Resistenz gegenüber drei P. infestans Isolaten geprüft. Zusätzlich wurde der Einfluss der Fruchtnachreife auf die Resistenzeigenschaften der Tomatenfrüchte gegenüber P. infestans analysiert (Kap. 4). Insgesamt 40 Sorten wurden auch unter Feldbedingungen auf Blatt- und Fruchtbefall untersucht (Kap. 5). Die frühen Stadien der Infektion von Tomatenblättern mit P. infestans Sporangien wurden mikroskopisch bei acht Tomatensorten mit unterschiedlichen quantitativen Reaktionsprofilen und drei Isolaten untersucht (Kap. 6). Hierzu wurden die Entwicklungsstadien von P. infestans Sporangien nach 24h, 48h und 60h nach der Inokulation auf und im Blatt mit der Calcofluor und der KOH - Anilin Blau Färbung sichtbar gemacht. Das Auftreten und die Lokalisation von H2O2 im Blatt nach 48h und 60h nach der Inokulation in Reaktion auf die Infektion wurde mithilfe einer DAB (3,3′ - Diaminobenzidine) Färbung untersucht. Es wurden einige, z.T. auch wahrscheinlich neue, qualitative Blattresistenzen gegenüber P. infestans gefunden, jedoch war keine der 109 Akzessionen vollständig resistent gegenüber allen Isolaten. Für die quantitative Resistenz von Blättern lagen in vielen Fällen isolatspezifische Unterschiede vor. Die Sorte x Isolat Interaktionen konnten mit Hilfe der erweiterten Clusteranalyse erfolgreich analysiert werden und die Akzessionen in Gruppen mit unterschiedlichen quantitativen Resistenzprofilen bzgl. der Interaktion mit den Isolaten und des Resistenzniveaus eingeteilt werden. Für die Fruchtresistenz konnten keine qualitativen Resistenzen gegenüber den drei getesteten Isolaten gefunden werden. Im Gegensatz dazu unterschieden sich die Tomatensorten in ihrer quantitativen Resistenz und Sorten und Isolate interagierten signifikant. Auch für die Fruchtresistenz konnten Gruppen mit unterschiedlichen quantitativen Reaktionsprofilen gebildet werden. Insgesamt nimmt die Anfälligkeit von Tomatenfrüchten mit zunehmender Reife kontinuierlich und signifikant ab. Unter Laborbedingungen korrelierten nur die Sporulationskapazität der Früchte und der prozentuale Blattbefall. Im Feldversuch über zwei Jahre und mit bis zu 40 Tomatensorten war der Zusammenhang hoch signifikant, jedoch asymptotisch, d.h. bereits bei sehr geringem Blattbefall war der Fruchtbefall sehr hoch. Bei den Tomatenherkünften, die sowohl im Labor als auch im Feld auf ihre Anfälligkeit getestet wurden, erschienen die Blattanfälligkeiten ähnlich, während kein klarer Zusammenhang zwischen der Fruchtanfälligkeit im Feld und im Labor bestand. Die Entwicklung von P. infestans auf der Blattoberfläche war unabhängig von der Sorte. Sowohl beim Eindringen und der Etablierung von P. infestans ins Blatt als auch bei der damit verbunden H2O2 Aktivität im Wirt wurden deutliche isolat- und sortenspezifische Effekte gefunden, die aber nur zum Teil mit den quantitativen Unterschieden der Blattresistenz korrespondierten. Sorten, die bei hoher Resistenz unterschiedliche Reaktionsprofile aufweisen, sind grundsätzlich interessante Kreuzungspartner, um die quantitative Resistenz gegenüber P. infestans zu verbessern. Hier sind vor allem Sorten, die sich auch in ihrer H2O2 Aktivität unterscheiden von Interesse.

Peritrophic membrane role in enhancing digestive efficiency Theoretical and experimental models

The pentrophic membrane (PM) is an anatomical structure surrounding the food bolus in most insects. Rejecting the idea that PM has evolved from coating mucus to play the same protective role as it, novel functions were proposed and experimentally tested. The theoretical principles underlying the digestive enzyme recycling mechanism were described and used to develop an algorithm to calculate enzyme distributions along the midgut and to infer secretory and absorptive sites. The activity of a Spodoptera frugiperda microvillar aminopeptidase decreases by 50% if placed in the presence of midgut contents. S. frugiperda trypsin preparations placed into dialysis bags in stirred and unstirred media have activities of 210 and 160%, respectively, over the activities of samples in a test tube. The ectoperitrophic fluid (EF) present in the midgut caeca of Rhynchosciara americana may be collected. If the enzymes restricted to this fluid are assayed in the presence of PM contents (PMC) their activities decrease by at least 58%. The lack of PM caused by calcofluor feeding impairs growth due to an increase in the metabolic cost associated with the conversion of food into body mass. This probably results from an increase in digestive enzyme excretion and useless homeostatic attempt to reestablish destroyed midgut gradients. The experimental models support the view that PM enhances digestive efficiency by: (a) prevention of non-specific binding of undigested material onto cell Surface; (b) prevention of excretion by allowing enzyme recycling powered by an ectoperitrophic counterflux of fluid; (c) removal from inside PM of the oligomeric molecules that may inhibit the enzymes involved in initial digestion; (d) restriction of oligomer hydrolases to ectoperitrophic space (ECS) to avoid probable partial inhibition by non-dispersed undigested food. Finally,PM functions are discussed regarding insects feeding on any diet. (C) 2008 Elsevier Ltd. All rights reserved.

O mutante pso9-1 de Saccharomyces cerevisiae, sensível a psoralenos fotoativados, contém um alelo mutante do gene MEC3 envolvido em checkpoint

Análises de complementação do mutante pso9-1, sensível a psoralenos mono- e bifuncionais fotoativados, UV254nm e nitrosoguanidina, com os mutantes pso1 a pso8, confirmou que este contém uma nova mutação pso. A clonagem molecular a partir de um banco genômico de levedura sugeriu pso9-1 como alelo mutante do gene de checkpoint que responde a danos no DNA MEC3. A não-complementação de vários fenótipos de sensibilidade em diplóides pso9-1/mec3∆ confirmou o alelismo dos dois mutantes. A sensibilidade à calcofluor white e à cafeína não foi aumentada nas linhagens pso9-1 e mec3∆, em relação as suas respectivas selvagens, sugerindo que o mutante pso9-1 não porta uma mutação na região promotora. O fenótipo mutante de mec3∆ foi levemente mais pronunciado para sensibilidade à 8-MOP + UVA e UVC, e para a supressão de mutação para frente induzida por UVC, sugerindo uma função residual para a proteína produzida por este alelo mutante.

Expressão de uma quitinase de Metarhizium anisopliae em Nicotiana tabacum : obtenção de plantas transgênicas resistentes a doenças fúngicas

A resistência a doenças em plantas transgênicas tem sido obtida por meio da expressão de genes isolados de bactérias, fungos micoparasitas e plantas. Neste trabalho, relatamos a utilização de um gene do fungo entomopatogênico Metarhizium anisopliae como modo de gerar resistência a doenças fúngicas em plantas. O gene chit1 codifica a quitinase CHIT42 (EC 3.2.1.14), pertencente a uma classe de glicosil-hidrolases capazes de converter quitina em oligômeros de N-acetil-glicosamina (NAcGlc). Quando presentes em tecidos vegetais, supõese que as quitinases ataquem especificamente a parede celular de fungos invasores, provocando danos às hifas e causando a morte por lise das células fúngicas. Deste modo, dois diferentes grupos de plantas transgênicas de Nicotiana tabacum foram produzidos: no primeiro deles, denominado chitplus, os indivíduos possuem o gene chit1 sob o controle do promotor CaMV 35S. O segundo grupo, demoninado chitless, consiste de plantas transformadas com um T-DNA não contendo o gene do fungo. Trinta e quatro plantas transgênicas resistentes à canamicina (17 de cada grupo) foram regeneradas a partir de discos de folhas infectados por Agrobacterium tumefaciens. A produção da quitinase em extratos protéicos de folhas foi analisada por zimogramas em SDS-PAGE contendo glicol-quitina e corados por calcoflúor branco, na forma de um screening dos transgênicos primários. As plantas transgênicas foram testadas, ainda, por meio de ensaios colorimétricos empregando oligômeros sintéticos de NAcGlc como substratos específicos, além de immunoblot e Western blot com soro anti-quitinase. A quantidade de enzima recombinante nas plantas chitplus variou desde nenhuma atividade detectável a elevados níveis de expressão da enzima. A hibridização de Southern blot demonstrou que o número de cópias do gene chit1 integradas no genoma vegetal foi estimado entre uma e quatro. A primeira geração de plantas transgênicas geradas por autofecundação de parentais portadores de duas cópias do transgene foi testada com relação à estabilidade da herança do transgene e em 43 de um total de 67 descendentes, originados de quatro cruzamentos independentes, o padrão de segregação não diferiu das proporções Mendelianas esperadas. Ensaios de resistência, desafiando as plantas transgênicas com o basidiomiceto Rhizoctonia solani foram realizados e uma evidente diminuição da área foliar contendo lesões fúngicas foi observada entre as linhagens transgênicas, embora variações na atividade quitinolítica tenham influenciado o nível de resistência. Nossos resultados sugerem uma relação direta entre a atividade específica de quitinase e ao aumento nos níveis de resistência às lesões causadas pela infecção por R. solani.

The Role of Glucosidase I (Cwh41p) in the Biosynthesis of Cell Wall β-1,6-Glucan Is Indirect

CWH41, a gene involved in the assembly of cell wall β-1,6-glucan, has recently been shown to be the structural gene for Saccharomyces cerevisiae glucosidase I that is responsible for initiating the trimming of terminal α-1,2-glucose residue in the N-glycan processing pathway. To distinguish between a direct or indirect role of Cwh41p in the biosynthesis of β-1,6-glucan, we constructed a double mutant, alg5Δ (lacking dolichol-P-glucose synthase) cwh41Δ, and found that it has the same phenotype as the alg5Δ single mutant. It contains wild-type levels of cell wall β-1,6-glucan, shows moderate underglycosylation of N-linked glycoproteins, and grows at concentrations of Calcofluor White (which interferes with cell wall assembly) that are lethal to cwh41Δ single mutant. The strong genetic interactions of CWH41 with KRE6 and KRE1, two other genes involved in the β-1,6-glucan biosynthetic pathway, disappear in the absence of dolichol-P-glucose synthase (alg5Δ). The triple mutant alg5Δcwh41Δkre6Δ is viable, whereas the double mutant cwh41Δkre6Δ in the same genetic background is not. The severe slow growth phenotype and 75% reduction in cell wall β-1,6-glucan, characteristic of the cwh41Δkre1Δ double mutant, are not observed in the triple mutant alg5Δcwh41Δkre1Δ. Kre6p, a putative Golgi glucan synthase, is unstable in cwh41Δ strains, and its overexpression renders these cells Calcofluor White resistant. These results demonstrate that the role of glucosidase I (Cwh41p) in the biosynthesis of cell wall β-1,6-glucan is indirect and that dolichol-P-glucose is not an intermediate in this pathway.

Bacterial Cellulose-Binding Domain Modulates in Vitro Elongation of Different Plant Cells1

Recombinant cellulose-binding domain (CBD) derived from the cellulolytic bacterium Clostridium cellulovorans was found to modulate the elongation of different plant cells in vitro. In peach (Prunus persica L.) pollen tubes, maximum elongation was observed at 50 μg mL−1 CBD. Pollen tube staining with calcofluor showed a loss of crystallinity in the tip zone of CBD-treated pollen tubes. At low concentrations CBD enhanced elongation of Arabidopsis roots. At high concentrations CBD dramatically inhibited root elongation in a dose-responsive manner. Maximum effect on root hair elongation was at 100 μg mL−1, whereas root elongation was inhibited at that concentration. CBD was found to compete with xyloglucan for binding to cellulose when CBD was added first to the cellulose, before the addition of xyloglucan. When Acetobacter xylinum L. was used as a model system, CBD was found to increase the rate of cellulose synthase in a dose-responsive manner, up to 5-fold compared with the control. Electron microscopy examination of the cellulose ribbons produced by A. xylinum showed that CBD treatment resulted in a splayed ribbon composed of separate fibrillar subunits, compared with a thin, uniform ribbon in the control.