Analytical thermal study on nonlinear fundamental heat transfer cases using a novel computational technique

In this paper a novel computational technique called Parameterized Perturbation Method (PPM) is used to obtain the solutions of nonlinear fundamental heat conduction equations. Three well known problems in the area of heat transfer are addressed to be solved. An analytical investigation is carried out for: (a) the temperature distribution in a fin with a temperature-dependent thermal conductivity, (b) the cooling of the lumped system with variable specific heat, and (c) the temperature distribution of a convective-radiative fin. The validity of the results of PPM solution was verified via comparison with numerical results obtained using a fourth order Runge-Kutta method. These comparisons revealed that PPM is a powerful approach for solving these problems. Also, the results showed that the main attributions of this method are very straightforward calculations and low computational burden compared to previous analytical and numerical approaches.

Convective heat-transfer rate distributions over a missile shaped body flying at hypersonic speeds

Experiments are carried out with air as the test gas to obtain the surface convective heating rate on a missile shaped body flying at hypersonic speeds. The effect of fins on the surface heating rates of missile frustum is also investigated. The tests are performed in a hypersonic shock tunnel at stagnation enthalpy of 2 MJ/kg and zero degree angle of attack. The experiments are conducted at flow Mach number of 5.75 and 8 with an effective test time of 1 ms. The measured stagnation-point heat-transfer data compares well with the theoretical value estimated using Fay and Riddell expression. The measured heat-transfer rate with fin configuration is slightly higher than that of model without fin. The normalized values of experimentally measured heat transfer rate and Stanton number compare well with the numerically estimated results. (C) 2009 Elsevier Inc. All rights reserved.

Teaching crabs to walk straight : is there a place for ethics education in Malaysian accountancy courses?

Recent releases from the International Federation of Accountants (IFAC) highlight the importance of ethics education. Academic institutions employ varying methods of teaching ethics and place varying levels of emphasis on ethics teaching during a business/accounting degree. This paper attempts to evaluate whether teaching ethics to final year accountancy students is beneficial. At the commencement of a semester 85 final year accounting students were given five ethical scenarios on which to make an ethical decision. During the semester they were subject to two different methods of teaching ethics, a traditional lecture/tutorial process and a group assignment. ----- After a significant gap, students were re-presented with the ethical scenarios and asked what action they now considered appropriate. In all five instances students offered a more ethical response the second time. When asked to evaluate the methodologies the students considered both training methods to have a positive effect on their ethical thinking. The results suggest it is beneficial to include ethics teaching in accountancy courses, if the profession’s goal of ethical practitioners is to be achieved.

Multiphysics modelling of convective drying of food materials

Currently, 1.3 billion tonnes of food is lost annually due to lack of proper processing and preservation method. Drying is one of the easiest and oldest methods of food processing which can contribute to reduce that huge losses, combat hunger and promote food security. Drying increase shelf life, reduce weight and volume of food thus minimize packing, storage, and transportation cost and enable storage of food under ambient environment. However, drying is a complex process which involves combination of heat and mass transfer and physical property change and shrinkage of the food material. Modelling of this process is essential to optimize the drying kinetics and improve energy efficiency of the process. Since material properties varies with moisture content, the models should not consider constant materials properties, constant diffusion .The objective of this paper is to develop a multiphysics based mathematical model to simulate coupled heat and mass transfer during convective drying of fruit considering variable material properties. This model can be used predict the temperature and moisture distribution inside the food during drying. Effect of different drying air temperature and drying air velocity on drying kinetics has been demonstrated. The governing equations of heat and mass transfer were solved with Comsol Multiphysics 4.3.

A Worthwhile Exchange - a Guide to Indigenous Philanthropy: research findings and success stories from philanthropy supporting Aboriginal and Torres Straight Islander People.

The Guide includes research findings from the Australian Centre for Philanthropy and Non Profit Studies at the Queensland University of Technology (QUT). This research probed the experiences of fourteen Indigenous people who have had different degrees of success in seeking funding from philanthropic organisations. This research shows how grantmakers can make a significant difference in the lives of Aboriginal and Torres Strait Islander people.

Heat and mass transfer modeling of the osmo-convective drying of yacon roots (Smallanthus sonchifolius)

Osmotic treatments are often applied prior to convective drying of foods to impart sensory appeal aspects. During this process a multicomponent mass flow, composed mainly of water and osmotic agent, takes place. In this work, a heat and mass transfer model for the osmo-convective drying of yacon was developed and solved by the Finite Element Method using COMSOL Multiphysics®, considering a 2-D axisymmetric geometry and moisture dependent thermophysical properties. Yacon slices were osmotically dehydrated for 2 hours in a solution of sucralose and then dried in a tray dryer for 3 hours. The model was validated by experimental data of temperature, moisture content and sucralose uptake (R²> 0.90).

Temperature redistribution modelling during intermittent microwave convective heating

Microwave power is used for heating and drying processes because of its faster and volumetric heating capability. Non-uniform temperature distribution during microwave application is a major drawback of these processes. Intermittent application of microwave potentially reduces the impact of non-uniformity and improves energy efficiency by redistributing the temperature. However, temperature re-distribution during intermittent microwave heating has not been investigated adequately. Consequently, in this study, a coupled electromagnetic with heat and mass transfer model was developed using the finite element method embedded in COMSOL-Multyphysics software. Particularly, the temperature redistribution due to intermittent heating was investigated. A series of experiments were performed to validate the simulation. The test specimen was an apple and the temperature distribution was closely monitored by a TIC (Thermal Imaging Camera). The simulated temperature profile matched closely with thermal images obtained from experiments.

Scared straight : boot camps for Queensland

The Liberal National Party (‘LNP’) ‘tough on youth crime’ policy mantra was well publicised in the months leading up to the 2012 Queensland state election. 1 Boot camp trials were espoused as a quick-fix panacea — a way of addressing youth offending. The idea was particularly favoured in the far northern regions of the state. In line with the new government’s policy, the Youth Justice (Boot Camp Orders) and Other Legislation Amendment Bill 2012 (Qld) (‘the Bill’) had a speedy passage through the unicameral Queensland parliament. It was introduced on 1 November 2012, scrutinised by the Legal Affairs and Community Safety Committee (‘LACSC’) which sought community feedback, and reported back to Parliament within the given timeframe of three weeks. The Bill received assent early December and the provisions commenced in January 2013. This article examines the legislative changes implemented in Queensland. It analyses the issues prompting the amendments such as the perception that parts of Queensland were in the grip of a ‘soaring juvenile crime rate’, the conservative government’s ‘tough stance’ policy towards youth offending, and the transfer of youth justice ‘solutions’ such as ‘boot camps’ among jurisdictions. The article assesses the evidence base for boot camp orders as an option in sentencing young offenders and concludes by raising serious concerns about pursuing such a narrow hardline approach to youth justice.

A preliminary analysis of convective windstorm environments across Australia

This manuscript documents a preliminary analysis of convective windstorm environments across Australia. It combines radiosonde, reanalysis and severe weather observations to achieve this objective. Severe weather observations across Australia are revealed to have significant issues with stationarity, even when only the past thirty years are considered. Radiosonde and reanalysis observations are shown to agree relatively well for several cities in Australia. In addition, significantly different environments are documented to generate severe wind and tornado events in a sub-tropical environment such as Brisbane compared with a more mid-latitude-like environment such as Perth. The potential to extend this analysis for the remainder of Australia is also briefly discussed.

Ship Motion Control : Course Keeping and Roll Stabilisation Using Rudder and Fins

Motion control systems have a significant impact on the performance of ships and marine structures allowing them to perform tasks in severe sea states and during long periods of time. Ships are designed to operate with adequate reliability and economy, and in order to achieve this, it is essential to control the motion. For each type of ship and operation performed (transit, landing a helicopter, fishing, deploying and recovering loads, etc.), there are not only desired motion settings, but also limits on the acceptable (undesired) motion induced by the environment. The task of a ship motion control system is therefore to act on the ship so it follows the desired motion as closely as possible. This book provides an introduction to the field of ship motion control by studying the control system designs for course-keeping autopilots with rudder roll stabilisation and integrated rudder-fin roll stabilisation. These particular designs provide a good overview of the difficulties encountered by designers of ship motion control systems and, therefore, serve well as an example driven introduction to the field. The idea of combining the control design of autopilots with that of fin roll stabilisers, and the idea of using rudder induced roll motion as a sole source of roll stabilisation seems to have emerged in the late 1960s. Since that time, these control designs have been the subject of continuous and ongoing research. This ongoing interest is a consequence of the significant bearing that the control strategy has on the performance and the issues associated with control system design. The challenges of these designs lie in devising a control strategy to address the following issues: underactuation, disturbance rejection with a non minimum phase system, input and output constraints, model uncertainty, and large unmeasured stochastic disturbances. To date, the majority of the work reported in the literature has focused strongly on some of the design issues whereas the remaining issues have been addressed using ad hoc approaches. This has provided an additional motivation for revisiting these control designs and looking at the benefits of applying a contemporary design framework, which can potentially address the majority of the design issues.

Electrical imaging and fluid modeling of convective fingering in a shallow water-table aquifer

Unstable density-driven flow can lead to enhanced solute transport in groundwater. Only recently has the complex fingering pattern associated with free convection been documented in field settings. Electrical resistivity (ER) tomography has been used to capture a snapshot of convective instabilities at a single point in time, but a thorough transient analysis is still lacking in the literature. We present the results of a 2 year experimental study at a shallow aquifer in the United Arab Emirates that was designed to specifically explore the transient nature of free convection. ER tomography data documented the presence of convective fingers following a significant rainfall event. We demonstrate that the complex fingering pattern had completely disappeared a year after the rainfall event. The observation is supported by an analysis of the aquifer halite budget and hydrodynamic modeling of the transient character of the fingering instabilities. Modeling results show that the transient dynamics of the gravitational instabilities (their initial development, infiltration into the underlying lower-density groundwater, and subsequent decay) are in agreement with the timing observed in the time-lapse ER measurements. All experimental observations and modeling results are consistent with the hypothesis that a dense brine that infiltrated into the aquifer from a surficial source was the cause of free convection at this site, and that the finite nature of the dense brine source and dispersive mixing led to the decay of instabilities with time. This study highlights the importance of the transience of free convection phenomena and suggests that these processes are more rapid than was previously understood.

Plasma-enabled growth of ultralong straight, helical, and branched silica photonic nanowires

This article reports on the lowerature inductively coupled plasma-enabled synthesis of ultralong (up to several millimeters in length) SiO2 nanowires, which were otherwise impossible to synthesize without the presence of a plasma. Depending on the process conditions, the nanowires feature straight, helical, or branched morphologies. The nanowires are amorphous, with a near-stoichiometric elemental composition ([O] / [Si] =2.09) and are very uniform throughout their length. The role of the ionized gas environment is discussed and the growth mechanism is proposed. These nanowires are particularly promising for nanophotonic applications where long-distance and channelled light transmission and polarization control are required.