Sexage et phylogénie, à partir des gènes CHD (-Z et -W) et COX-1, des oiseaux de proie du Québec et de perroquets d’attrait vétérinaire

Connaître le sexe d’un oiseau est important pour divers domaines notamment pour les vétérinaires, les écologistes ainsi que pour les éleveurs d’oiseaux qui veulent former des couples qui serviront à la reproduction. Plusieurs espèces d’oiseaux, juvéniles et adultes, n’ont pas de dimorphisme sexuel. L’utilisation de l’ADN est une façon rapide de déterminer le sexe à partir d’un échantillon de sang, de muscle, de plumes ou de fèces. Par contre, la méthode devrait être validée pour chaque espèce et idéalement, standardisée. Le premier objectif de cette étude est de développer une méthode de sexage par séquençage des oiseaux à partir des séquences du gène CHD, en utilisant les oiseaux de proie et les perroquets vus en clinique au Québec. Un deuxième objectif est de faire l’identification de l’espèce à sexer, à partir du gène mitochondrial COX-1 et aussi à partir des séquences CHD-Z et CHD-W, utilisés pour le sexage. Un troisième objectif est d’évaluer les séquences sorties (CHD-Z, CHD-W et COX-1) en vue d’une étude phylogénique. Une extraction d’ADN a été effectuée chez 27 espèces de perroquets, 34 espèces d’oiseaux de proie, une corneille (Corvus brachyrhynchos) et un poulet (Gallus gallus). Une amplification par PCR a été exécutée pour les exons partiels 23 et 24 du gène CHD. Le séquençage de cet amplicon permettait de savoir s’il s’agissait d’un mâle (séquence simple CHD-Z) ou d’une femelle (séquences CHD-Z et CHD-W qui se chevauchent). Afin d’avoir des séquences CHD-W distinctes, un sous-clonage a été fait chez les femelles de chaque espèce. De cette manière, les séquences partielles du gène CHD, Z et W, ont été trouvées pour les espèces échantillonnées. Une étude phylogénique a été effectuée avec les séquences de COX-1, CHD-Z et CHD-W grâce au site « Clustal-Omega ». La méthode de sexage des oiseaux par séquençage du gène CHD est standard et efficace. Le gène COX-1 permet une meilleure identification des espèces parentes et le gène CHD-Z est le plus utile pour étudier la phylogénie profonde.

Sexage et phylogénie, à partir des gènes CHD (-Z et -W) et COX-1, des oiseaux de proie du Québec et de perroquets d’attrait vétérinaire

Connaître le sexe d’un oiseau est important pour divers domaines notamment pour les vétérinaires, les écologistes ainsi que pour les éleveurs d’oiseaux qui veulent former des couples qui serviront à la reproduction. Plusieurs espèces d’oiseaux, juvéniles et adultes, n’ont pas de dimorphisme sexuel. L’utilisation de l’ADN est une façon rapide de déterminer le sexe à partir d’un échantillon de sang, de muscle, de plumes ou de fèces. Par contre, la méthode devrait être validée pour chaque espèce et idéalement, standardisée. Le premier objectif de cette étude est de développer une méthode de sexage par séquençage des oiseaux à partir des séquences du gène CHD, en utilisant les oiseaux de proie et les perroquets vus en clinique au Québec. Un deuxième objectif est de faire l’identification de l’espèce à sexer, à partir du gène mitochondrial COX-1 et aussi à partir des séquences CHD-Z et CHD-W, utilisés pour le sexage. Un troisième objectif est d’évaluer les séquences sorties (CHD-Z, CHD-W et COX-1) en vue d’une étude phylogénique. Une extraction d’ADN a été effectuée chez 27 espèces de perroquets, 34 espèces d’oiseaux de proie, une corneille (Corvus brachyrhynchos) et un poulet (Gallus gallus). Une amplification par PCR a été exécutée pour les exons partiels 23 et 24 du gène CHD. Le séquençage de cet amplicon permettait de savoir s’il s’agissait d’un mâle (séquence simple CHD-Z) ou d’une femelle (séquences CHD-Z et CHD-W qui se chevauchent). Afin d’avoir des séquences CHD-W distinctes, un sous-clonage a été fait chez les femelles de chaque espèce. De cette manière, les séquences partielles du gène CHD, Z et W, ont été trouvées pour les espèces échantillonnées. Une étude phylogénique a été effectuée avec les séquences de COX-1, CHD-Z et CHD-W grâce au site « Clustal-Omega ». La méthode de sexage des oiseaux par séquençage du gène CHD est standard et efficace. Le gène COX-1 permet une meilleure identification des espèces parentes et le gène CHD-Z est le plus utile pour étudier la phylogénie profonde.

Sexagem molecular em aves: contribuições à conservação biológica e á divulgação científica

Pós-graduação em Ciências Biológicas (Genética) - IBB

Judge George W Paul's Japanese house : a case study

In the late 1880s a pre-fabricated Japanese house was shipped from Kobe, Japan, to Brisbane, Australia, and erected in the up-market suburb of New Farm by Japanese tradesmen. This paper is developed from a broader project researching the life of G W Paul, the man who had the house built and subsequently lived in it for the remainder of his life. Paul’s motivation in importing the house represented a unique, but unfulfilled effort to develop a future, hybrid culture for Queensland. This effort took the form of a commercial venture to construct Japanese houses as desirable and climatically suitable dwellings. Against the backdrop of this ambition, this paper presents new research to elucidate and extend previous knowledge, assesses the reception of the house by its nineteenth century Brisbane audience, and considers possible reasons for the limited response which signalled the cancellation of the commercial venture.

Book review: Ford, R.C., & Peeper, W.C. 2008. Managing Destination Marketing Organizations. Orlando: ForPer Publications

This volume represents the proceedings of the 13th ENTER conference, held at Lausanne, Switzerland during 2006. The conference brought together academics and practitioners across four tracks, which were eSolutions, refereed research papers, work-in-progress papers, and a Ph.D. workshop. This proceedings contains 40 refereed papers, which is less than the 51 papers presented in 2005. However, the editors advise that the scientific committee was stricter than in previous years, to the extent that the acceptance rate was 50%. A significant change in the current proceedings is the inclusion of extended abstracts of the 23 work-in-progress presentations. The papers cover a diverse range of topics across 16 research streams. This reviewer has adopted the approach of succinctly summarising the contribution of each of the 40-refereed papers, in the order in which they appear...

Cultural relativity as exchange : J.W. Lindt’s 'bush character and Aboriginal' from 'The Grafton Album', circa 1872

J.W.Lindt’s Colonial man and Aborigine image from the GRAFTON ALBUM: “On chemistry and optics all does not depend, art must with these in triple union blend” (text from J.W. Lindt’s photographic backing card) In this paper, I follow an argument that Lindt held a position in his particular colonial environment where he was simultaneously both an insider and an outsider and that such a position may be considered prerequisite in stimulating exchange. A study of the transition of J.W. Lindt in Grafton, N.S.W. in the 1860s from a traveller to a migrant and subsequently to a professional photographer, as well as Lindt’s photographic career, which evolved through strategic action and technical approaches to photography, bears witness to his cultural relativity. One untitled photograph from this period of work constructs a unique commentary of Australian colonial life that illustrates a non-hegemonic position, particularly as it was included in one of the first albums of photographs of Aborigines that Lindt gifted to an illustrious person (in this case the Mayor of Grafton). As in his other studio constructions, props and backdrops were arranged and sitters were positioned with care, but this photograph is the only one in the album that includes a non-Aborigine in a relationship to an Aborigine. An analysis of the props, technical details of the album and the image suggests a reconciliatory aspect that thwarts the predominant attitudes towards Aborigines in the area at that time.

Microstructures and strengthening mechanisms of Cu/Ni/W nanolayered composites

Cu/Ni/W nanolayered composites with individual layer thickness ranging from 5nm to 300nm were prepared by a magnetron sputtering system. Microstructures and strength of the nanolayered composites were investigated by using the nanoindentation method combined with theoretical analysis. Microstructure characterization revealed that the Cu/Ni/W composite consists of a typical Cu/Ni coherent interface and Cu/W and Ni/W incoherent interfaces. Cu/Ni/W composites have an ultrahigh strength and a large strengthening ability compared with bi-constituent Cu–X(X¼Ni, W, Au, Ag, Cr, Nb, etc.) nanolayered composites. Summarizing the present results and those reported in the literature, we systematically analyze the origin of the ultrahigh strength and its length scale dependence by taking into account the constituent layer properties, layer scales and heterogeneous layer/layer interface characteristics, including lattice and modulus mismatch as well as interface structure.

Evaluation of plastic deformation ability of Cu/Ni/W metallic multilayers

Plastic deformation behavior of Cu/Ni/Wmetallicmultilayers with individual layer thickness ranging from 5 nm to 300 nm is investigated by nanoindentation testing. The experimental results reveal that the composite still exhibits indentation-induced plastic deformation instability and the loss of strain hardening ability at the nanometer scale even if the composite contains two kinds of layer interfaces (face centered cubic(FCC)/FCC and FCC/ body centered cubic) simultaneously. Plastic deformation behavior of the nanolayered material was evaluated and analyzed.

Teaching and learning family and consumer sciences through K-W-L charts

While much of the control and many of the activities found in today’s classrooms have been placed in the hands of the learners and learning has become inquiry-based, there remains a need for teachers to use teaching tools that would facilitate this student-centered teaching process. This article identifies the K-W-L Chart as one such tool and follows a case study of four Kuwaiti ‘Family and Consumer Sciences’ teaching / learning events to evaluate their ability to enhance the learning outcomes of eight students. The research was designed from a qualitative, multi-tiered design approach and was assessed through a constant comparative method of data analysis of interview responses, classroom observations and worksheet-assessments. The results showed that the use of K-W-L Charts influenced the teachers and learners toward a more inquiry-based approach and facilitated a more student-centered and collaborative learning environment, raising the level of interest and the amount of personal input given by the students.

Carbonate cementation in sandstones of the Plover Formation, North West Shelf, W.A

Ancient sandstones include important reservoirs for hydrocarbons (oil and gas), but, in many cases, their ability to serve as reservoirs is heavily constrained by the effects of carbonate cements on porosity and permeability. This study investigated the controls on distribution and abundance of carbonate cements within the Jurassic Plover Formation, Browse Basin, North West Shelf, Australia. Samples were analysed petrographically with point counting of 59 thin sections and mineralogically with x-ray diffraction from two wells within the Torosa Gas Field. Selected samples were also analysed for stable isotopes of O and C. Sandstones are classified into eleven groups. Most abundant are quartzarenites and then calcareous quartzarenites. Lithology ranged between sandstones consisting of mostly quartz with scant or no carbonate in the form of cement or allochems, to sandstones with as much as 40% carbonate. The major sources of carbonate cement in Torosa 1 and Torosa 4 sandstones were found to be early, shallow marine diagenetic processes (including cementation), followed by calcite cementation and recrystallisation of cements and allochems during redistribution by meteoric waters. Blocky and sparry calcite cements, indicative of meteoric environments on the basis of stable isotope values and palaeotemperature assessment, overprinted the initial shallow marine cement phase in all cases and meteoric cements are dominant. Torosa 4 was influenced more by marine settings than Torosa 1, and thus has the greater potential for calcite cement. The relatively low compaction of calcite-cemented sandstones and the stable isotope data suggest deep burial cementation was not a major factor. Insufficient volcanic rock fragments or authigenic clay content infers alteration of feldspars was not a major source of calcite. Very little feldspar is present, altered or otherwise. Hence, increased alkalinity from feldspar dissolution is not a contributing factor in cement formation. Increased alkalinity from bacterial sulphate reduction in organic–rich fine sediments may have driven limited cementation in some samples. The main definable and significant source of diagenetic marine calcite cement originated from original marine cements and the nearby dissolution of biogenic sources (allochems) at relatively shallow depths. Later diagenetic fluids emplaced minor dolomite, but this cement did not greatly affect the reservoir quality in the samples studied.

Mutations in cardiac T-Box Factor gene TBX20 are associated with diverse cardiac pathologies, including defects of septation and valvulogenesis and cardiomyopathy

The T-box family transcription factor gene TBX20 acts in a conserved regulatory network, guiding heart formation and patterning in diverse species. Mouse Tbx20 is expressed in cardiac progenitor cells, differentiating cardiomyocytes, and developing valvular tissue, and its deletion or RNA interference-mediated knockdown is catastrophic for heart development. TBX20 interacts physically, functionally, and genetically with other cardiac transcription factors, including NKX2-5, GATA4, and TBX5, mutations of which cause congenital heart disease (CHD). Here, we report nonsense (Q195X) and missense (I152M) germline mutations within the T-box DNA-binding domain of human TBX20 that were associated with a family history of CHD and a complex spectrum of developmental anomalies, including defects in septation, chamber growth, and valvulogenesis. Biophysical characterization of wild-type and mutant proteins indicated how the missense mutation disrupts the structure and function of the TBX20 T-box. Dilated cardiomyopathy was a feature of the TBX20 mutant phenotype in humans and mice, suggesting that mutations in developmental transcription factors can provide a sensitized template for adult-onset heart disease. Our findings are the first to link TBX20 mutations to human pathology. They provide insights into how mutation of different genes in an interactive regulatory circuit lead to diverse clinical phenotypes, with implications for diagnosis, genetic screening, and patient follow-up.

Psychological symptoms : a review of screening practices for patients with coronary heart disease (CHD)

Background/Aims: Coronary heart disease (CHD) and coronary events have been strongly linked to psychological symptoms in patients during hospitalisation and post-discharge. Within Australia CHD average length of stay is decreasing and symptoms often do not present until discharge. Early screening and treatment of psychological symptoms has been recommended to reduce mortality and identify anxiety and depression. This literature review was undertaken to evaluate and describe current screening practices to identify psychological symptoms in these patients.

Identyfikacja blednych podpisow w kolekcjach

Weryfikacja poprawnosci podpisów cyfrowych jest obliczeniowo kosztowna. Aby ja zwiekszyc, zamiast pojedynczych podpisów weryfikacji poddaje sie kolekcje. Jezeli wszystkie podpisy w kolekcji sa poprawne, to cała kolekcja jest akceptowana. Pojawienie sie błednych podpisów w kolekcji powoduje, ze weryfikacja jest błedna. Nie mozna odrzucic całej kolekcji, zachodzi wiec koniecznosc identyfikacji błednych podpisów w kolekcji. W artykule zdefiniowano metody identyfikacji błednych podpisów. W szczególnosci okreslono weryfikacje typu „dziel i rzadz”, w których wejsciowe kolekcje sa dzielone na podkolekcje tak długo, az koncowe błedne kolekcje zawieraja pojedyncze podpisy. Opisano równiez weryfikator Hamminga identyfikujacy jeden błedny podpis w kolekcji oraz uogólniono ten weryfikator do postaci dwupoziomowego weryfikatora, umozliwiajacego identyfikacje dwóch błednych podpisów. Podano tez definicje ogólnego weryfikatora zdolnego do identyfikacji dowolnej liczby błednych podpisów w kolekcjach.