National Workshop on Bus-Wheelchair Accessibility, May 7-9, 1986.

"UMTA Technical Assistance Program"--Cover.

Bus and passenger accident prevention. Final report.

Federal Transit Administration, Washington, D.C.

Opportunities and Challenges for the Widespread Implementation of Battery Powered Electric Transit Buses

The need for more sustainable public transportation choices drives innovation and provides opportunity for improvement in options. Transit buses provide many advantages for efficient transportation and electric drive vehicles are anticipated to play an increasing role in future transportation systems. A lifecycle cost analysis of battery electric transit buses indicates rate structures and demand charges do not currently have a large impact on lifecycle cost for small fleets of battery electric buses. As fleets grow, policies and rate structures will need to adjust to avoid becoming a barrier to adoption. Battery electric transit buses are now being developed which promise to address the primary issues of high life cycle cost, low reliability, range, and flexibility.

Operational assessment of Paralympics transit system: low-floor buses, lift-equipped buses, and signage.

Federal Transit Administration, Washington, D.C.

Standardization of availability, location, and use of safety equipment on urban transit buses : final report /

Mode of access: Internet.

In the matter of the arbitration between Transport Workers Union of America, Local 100 and New York City Omnibus Corporation; Fifth Avenue Coach Company; Jamaica Buses, Inc.; Triboro Coach Company; Queens-Nassau Transit Lines, Inc.; Steinway-Omnibus Corporation; Queensboro Bridge Railway Company, Inc.; Avenue B and East Broadway Transit Company, Inc. : opinion and award /

Cover title.

A microscopic simulation model to estimate Bus Rapid Transit (BRT) station service capacity with mixed stopping and non-stopping bus operation

Bus Rapid Transit (BRT) station is the interface between passenger and service. The station is crucial to line operation as it is typically the only location where buses can pass each other. Congestion may occur here when buses maneuvering into and out of the platform lane interfere with bus flow, or when a queue of buses forms upstream of the platform lane blocking the passing lane. However, some systems include operation where express buses pass the critical station, resulting in a proportion of non stopping buses. It is important to understand the operation of the critical busway station under this type of operation, as it affects busway line capacity. This study uses micro simulation to treat the BRT station operation and to analyze the relationship between station Limit state bus capacity (B_ls), Total Bus Capacity (B_ttl). First, the simulation model is developed for Limit state scenario and then a mathematical model is defined, calibrated for a specified range of controlled scenarios of mean and coefficient of variation of dwell time. Thereafter, the proposed B_ls model is extended to consider non stopping buses and B_ttlmodel is defined. The proposed models provides better understanding to the BRT line capacity and is useful for transit authorities for designing better BRT operation.

Towards proximity-based passenger sensing on public transport buses

While substantial research on intelligent transportation systems has focused on the development of novel wireless communication technologies and protocols, relatively little work has sought to fully exploit proximity-based wireless technologies that passengers actually carry with them today. This paper presents the real-world deployment of a system that exploits public transit bus passengers’ Bluetooth-capable devices to capture and reconstruct micro- and macro-passenger behavior. We present supporting evidence that approximately 12% of passengers already carry Bluetooth-enabled devices and that the data collected on these passengers captures with almost 80 % accuracy the daily fluctuation of actual passengers flows. The paper makes three contributions in terms of understanding passenger behavior: We verify that the length of passenger trips is exponentially bounded, the frequency of passenger trips follows a power law distribution, and the microstructure of the network of passenger movements is polycentric.

A microscopic simulation model to estimate bus rapid transit station bus capacity

The Bus Rapid Transit (BRT) station is the interface between passengers and services. The station is crucial to line operation as it is typically the only location where buses can pass each other. Congestion may occur here when buses maneuvering into and out of the platform lane interfere with bus flow, or when a queue of buses forms upstream of the platform lane blocking the passing lane. Further, some systems include operation where express buses do not observe the station, resulting in a proportion of non-stopping buses. It is important to understand the operation of the station under this type of operation and its effect on BRT line capacity. This study uses microscopic traffic simulation modeling to treat the BRT station operation and to analyze the relationship between station bus capacity and BRT line bus capacity. First, the simulation model is developed for the limit state scenario and then a statistical model is defined and calibrated for a specified range of controlled scenarios of dwell time characteristics. A field survey was conducted to verify the parameters such as dwell time, clearance time and coefficient of variation of dwell time to obtain relevant station bus capacity. The proposed model for BRT bus capacity provides a better understanding of BRT line capacity and is useful to transit authorities in BRT planning, design and operation.

Modeling Bus Rapid Transit station bus queuing for Bus Rapid Transit station bus operation analysis

Stations on Bus Rapid Transit (BRT) lines ordinarily control line capacity because they act as bottlenecks. At stations with passing lanes, congestion may occur when buses maneuvering into and out of the platform stopping lane interfere with bus flow, or when a queue of buses forms upstream of the station blocking inflow. We contend that, as bus inflow to the station area approaches capacity, queuing will become excessive in a manner similar to operation of a minor movement on an unsignalized intersection. This analogy is used to treat BRT station operation and to analyze the relationship between station queuing and capacity. In the first of three stages, we conducted microscopic simulation modeling to study and analyze operating characteristics of the station under near steady state conditions through output variables of capacity, degree of saturation and queuing. A mathematical model was then developed to estimate the relationship between average queue and degree of saturation and calibrated for a specified range of controlled scenarios of mean and coefficient of variation of dwell time. Finally, simulation results were calibrated and validated.

Modelling busway operation with mixed stopping and non-stopping buses

This thesis investigated the complexity of busway operation with stopping and non-stopping buses using field data and microscopic simulation modelling. The proposed approach made significant recommendations to transit authorities to achieve the most practicable system capacity for existing and new busways. The empirical equations developed in this research and newly introduced analysis methods will be ideal tools for transit planners to achieve optimal reliability of busways.

¿Buses o tranvías para las avenidas de ciudades latinoamericanas?

Una vez, el transporte público en casi todas las principales ciudades de América Latina dependía críticamente de servicios de tranvía, los que se extinguieron hace unos cincuenta años, por una serie de razones. Ahora, especialmente en las ciudades del mundo más desarrollado, regresa el tranvía, en una versión moderna, conocida generalmente como light rail transit. Sin embargo, en América Latina se ha desarrollado un concepto autóctono de servicio urbano de transporte masivo de pasajeros, en la forma de buses de alta capacidad que transitan por vías exclusivas, de una manera integrada con el resto del sistema de transporte público. En general, esta solución latinoamericana puede ser más indicada para las necesidades de la región, por razones de flexibilidad, costos y capacidad.

Buses or trams for Latin America's cities?

There was a time when tram services were critical to public transport in many of the largest cities of Latin America; however, trams disappeared about fifty years ago, for a number of reasons. They are back now, especially in the cities of the more developed world, in a modern version usually known as light rail transit. Latin America has developed its own concept of urban mass transit, namely, high-capacity buses operating in special lanes as an integral component of the overall mass transit system. As a general rule, this Latin American solution seems to be the best suited to the needs of the region, given its flexibility, cost and capacity. Each situation must be assessed separately, however, and in some cases, a modernized version of the tramway may be the best solution.

Tri-wheeled scooters transported on buses and vans: assessment of securement restraint issues. Final report.

Federal Transit Administration, Washington, D.C.

Crash protection systems for handicapped school and transit bus occupants. Volume I: executive summary. Interim report.

National Highway Traffic Safety Administration, Washington, D.C.