Recycling urban waste as possible use for rooftop vegetable garden

Urban authorities in Europe are confronted with increasing demands by urban dwellers for allotment gardens, but vacant urban soil tends to be scarce and/or polluted by past industrial activities. A possible solution for local authorities could therefore be to promote rooftop gardening. However little technical information exists on certain forms of rooftop urban agriculture, called Z-Farming. In 2012, a pilot experiment was run in Paris (France). Simple and cheap systems of rooftop gardening were tested on a rooftop using as crop substrates only local urban organic waste so as to contribute to the urban metabolism. Production levels and heavy metal contents in cropping substrates and edible vegetables were measured. Available results show (i) high levels of crop production with limited inputs compared to land professional gardening, (ii) low levels of heavy metal pollutants in the edible parts of the crops, especially for Cd and Pb with respect to EU norms for vegetables and (iii) positive influence on yields on organizing the substrate in layers and enhancing the biological activity through earthworm inoculation. These encouraging results allow us to consider that rooftop gardening is feasible and seem to have a great potential to improve urban resiliency. It will nevertheless be necessary to identify more precisely the types of roof that can be used and to assess more fully the generic result of the low level of pollution, as well as the global sustainability of these cropping systems.

Gestão verde de tecnologia da informação e comunicação: fatores que influenciam a sua adoção em grandes empresas usuárias no Brasil

A crescente utilização de recursos de informática e comunicação nas empresas, visando modernização, agilidade, redução de custos e outros, tem trazido diversos benefícios, mas tem também se tornado um enorme problema para o planeta. A quantidade de lixo eletrônico (e-waste) gerada pelos equipamentos de informática e comunicação tem dobrado a cada cinco anos, se tornando um dos principais focos de atenção nos últimos anos. O volume de lixo eletrônico gerado pelo descarte de equipamentos de informática e comunicação (TIC), já ultrapassa a marca de 50 milhões de toneladas por ano, o que equivale a oito vezes a produção total de resíduos da cidade de São Paulo. O mercado brasileiro total de eletrônicos é considerado o quinto do mundo, depois da China, Estados Unidos, Japão e Rússia. A produção total de lixo eletrônico no Brasil em 2011 foi de um milhão de toneladas e a parte referente a equipamentos de TIC foi estimada em 98 mil toneladas. Frente a este contexto este estudo visa contribuir para a expansão do conhecimento na gestão verde da cadeia de suprimentos (GSCM) aplicado à realidade empresarial brasileira de TIC. Especificamente pretende-se identificar quais fatores influenciam o processo de adoção e aplicação da gestão verde de TIC, em grandes empresas usuárias de TIC no Brasil, a partir dos modelos propostos por Molla (2008) e Molla e Coopers (2008). Desta forma buscou-se responder ao seguinte problema de pesquisa: quais fatores influenciam grandes empresas usuárias de tecnologia da informação e comunicação (TIC) no Brasil na adoção de conceitos de gestão de verde? Para isto, foi realizado estudo de caso em seis grandes empresas, todas lideres em seus setores, representando grandes áreas de serviços e manufatura. Como resultado final, foi proposto um novo modelo analítico, que pareceu mais adequado ao setor de serviços. O estudo também identificou que na gestão verde de TIC empresas manufatureiras tem prioridades diferentes das de serviço. Muitas vezes seus desafios operacionais são mais críticos em relação à sustentabilidade, que a gestão verde de TIC em si. Por outro lado, o estudo dos serviços prestados pelo setor público apesar dos grandes orçamentos anuais, apontou restrições quanto aos aspectos legais e deficiência de qualificação e capacitação de seus colaboradores como fatores limitantes para a implantação de programas de gestão verde mais abrangentes.

Desenvolvendo e gerenciando compostagem de resíduos sólidos urbanos: para geração de renda e repasse de tecnologia à acrevi

Nowadays, as well as in the past decades, the dumping of biodegradable organic waste in landfill is common practice in Brazil, as well as in most parts of the world. Nevertheless due to its rapid decomposition and release of odors, this practice hamper’s the operation and implementation of a recycling system. These facts encouraged our research to find an efficient system for the management of organic waste, not only for the use of official workers responsible for managing these wastes, but also for non-governmental institutions. The Recycling for Life Community Association – ACREVI (Associação Comunitária Reciclando para a Vida), together with the municipal authorities of Mossoró-RN, Brazil, have assumed the social role of collecting and recycling solid waste produced by most of the local population. However, it was observed that the organic waste it collected was not receiving any treatment. This present work aims to make compost with mixed waste (green waste and organic household), and then do chemical analysis of the material in view to use the waste as organic fertilizer. The objective being: to share the knowledge acquired by putting it into a very simple language accessible to people with little education. The experiment was conducted at ACREVI, Mossoró (RN), and the compost was obtained following the method "windrow", forming three cells (I, II, III) with conical shape, dimensions of 1.6 meters and 2.0 meters in diameter for cells I and II, and 1.0 meters high and 2.0 meters in diameter for cell III. The process was accompanied by analysis: CHN elemental, a variation of cell temperature, humidity, pH, TKN, bulk density, nutrients and heavy metals. Stabilized organic compounds reached the C/N ratio of 10.4/1 cell I and 10.4/1 in the cell II in the cell, showing how good soil conditions, with potential to improve the physical properties of any soil and pH acid soils, has presented the cell III at the end of the process the C/N 26/1, is a high ratio may be associated with the stack size III, thus changing the optimal conditions for the occurrence of the process. The levels of heavy metals in the analyzed compounds were lower than those established by the SDA normative instruction, Nº 27, of 5 June, 2006. The use of pruning trees and grass are used in small-scale composting, while generating a quality compost in the final process, it also created an important condition for a correct sizing of the composting piles. Under the studied conditions it is not advisable to use cells with a height of 1.00 m in height and 2.00 m in diameter, as these do not prevent the rapid dissipation of heat and thus can not be a good product at the end of composting. The composting process in the shed of the association and the preparation of the primer enabled the development of an alternative technology to generate income for members of ACREVI.

Green building: análise das dificuldades (ainda) enfrentadas durante o processo de certificação LEED no Brasil

A preocupação com o esgotamento dos recursos naturais e a conscientização sobre as questões ligadas à sustentabilidade provocaram o estudo em um setor que tem sido apontado como de grande importância para a transformação do meio ambiente: a construção civil. Com isso percebemos o surgimento de um conjunto de práticas e procedimentos visando as chamadas "construções sustentáveis", que introduziram uma nova realidade comercial no segmento da construção civil. Para avaliar se uma construção é ou não sustentável surgiram os eco-labellings, que através de sistema de pontuação ou conceitos permitem avaliar qualitativamente em que grau de sustentabilidade uma edificação encontra-se. Em especial, o mercado brasileiro vem, desde 2004, buscando a certificação ambiental LEED; sendo assim, a presente dissertação tem como objetivo identificar, após quase uma década desde a primeira submissão de projeto brasileiro ao USGBC, quais ainda são as dificuldades enfrentadas no processo de certificação LEED. O referencial teórico reforçou que o segmento da construção civil contribui de duas formas para a degradação do meio ambiente: no consumo de recursos naturais e energéticos, e na geração de grande quantidade de resíduos. Por esse motivo, estudos nessa área são extremamente importantes para a transformação do meio ambiente, que, através da adoção de práticas construtivas sustentáveis poderá minimizar os impactos gerados. Neste trabalho, optou-se pela utilização de pesquisa exploratória quanto aos fins, uma vez que existe pouco conhecimento acumulado sobre a avaliação do processo de certificação LEED, e bibliográfica, complementada com pesquisa de campo, quanto ao meio, pois fundamenta-se em estudo desenvolvido com base em material publicado, complementado por entrevistas no campo. Este trabalho caracteriza-se por se um estudo introdutório à compreensão do tema e convida a estudos complementares mais abrangentes, dada a relevância do assunto nas três esferas de sustentabilidade: social, ambiental e econômica.

Sustainable inorganic Binders and Their Applications in Building Engineering: A Green Alternative to Ordinary Portland Cement

In the last decades, the building materials and construction industry has been contributing to a great extent to generate a high impact on our environment. As it has been considered one of the key areas in which to operate to significantly reduce our footprint on environment, there has been widespread belief that particular attention now has to be paid and specific measures have to be taken to limit the use of non-renewable resources.The aim of this thesis is therefore to study and evaluate sustainable alternatives to commonly used building materials, mainly based on ordinary Portland Cement, and find a supportable path to reduce CO2 emissions and promote the re-use of waste materials. More specifically, this research explores different solutions for replacing cementitious binders in distinct application fields, particularly where special and more restricting requirements are needed, such as restoration and conservation of architectural heritage. Emphasis was thus placed on aspects and implications more closely related to the concept of non-invasivity and environmental sustainability. A first part of the research was addressed to the study and development of sustainable inorganic matrices, based on lime putty, for the pre-impregnation and on-site binding of continuous carbon fiber fabrics for structural rehabilitation and heritage restoration. Moreover, with the aim to further limit the exploitation of non-renewable resources, the synthesis of chemically activated silico-aluminate materials, as metakaolin, ladle slag or fly ash, was thus successfully achieved. New sustainable binders were hence proposed as novel building materials, suitable to be used as primary component for construction and repair mortars, as bulk materials in high-temperature applications or as matrices for high-toughness fiber reinforced composites.

Implementing a site waste management plan: a case study of a medium sized building contractor in Ireland

Construction and demolition waste management is becoming increasingly important on construction sites as landfill space in Ireland is rapidly depleting and waste management costs are rising. Due to these factors waste management plans are seen as a good response to minimising waste on site and this thesis aims to investigate how to implement such a plan on a practical case study as well as investigating the legislation regarding construction and demolition waste along with market availability for the reuse of the waste. Main contractor surveys were also carried out in order to gain a better understanding of current attitudes within the industry and these surveys are analysed in chapter five. A survey was also carried out among sub-contractors but this survey has not been used for this thesis as the study is on-going. The primary aim of this thesis is to examine the waste hierarchy opportunities that are available for construction and demolition waste in Ireland and to examine the effects of management strategies on construction and demolition waste reduction at the project level. A partnership was developed with Carey Developments Ltd in Co. Galway and an analysis of their waste management practices was undertaken. The primary case study will be the ‘Taylors Hill’ project in Co. Galway where work commenced in March, 2012. The secondary aim of the thesis is to develop specific waste minimisation strategies for the company and to develop a training tool kit for use on site.

Waste Reduction, Construction and Demolition Debris: Guide for Building, Construction and Environmental Professionals, Revised November 2008

This document is intended to lay the foundation for resource reduction strategies in new construction, renovation and demolition. If you have an innovative idea or information that you believe should be included in future updates of this manual please email Shelly Codner at scodner@region12cog.org or Jan Loyson at Jan.Loyson@Iowalifechanging.com. Throughout this manual, we use the term “waste reduction” to define waste management initiatives that will result in less waste going to the landfill. In accordance with the waste management hierarchy these practices include reducing (waste prevention), reusing (deconstruction and salvage), recycling and renewing (making old things new again) - in that order. This manual will explain what these practices are and how to incorporate them into your projects.

Perceptions of green branding and identity building amongst small Finnish textile producers

The textile industry is one of the most polluting industries in the world. The amount of air and water pollution it causes puts a burden on the environment. There are companies who have taken the environmental and social aspects into account in the their production and chosen to operate in a green manner. This thesis studies how the phenomenon of green branding is seen from the perspectives of small Finnish textile companies. The theory used in this thesis has to do with green branding and identity building. The theory is used to analyze the results of the empirical findings. The main research question that the thesis aims to answer is how green branding is perceived within the Finnish textile industry. In order to answer the main research question, empirical data was collected from five relevant companies within the Finnish textile industry. The companies interviewed for the study were WST, Saana ja Olli, RCM, R-collection and Tiensivu. The study was conducted as a multiple case based study where multiple experts from green companies were interviewed. The experts were all owners or employees of companies that have a so-called green brand identity. The data was collected through semi-structured interviews, where the relevant experts from each company were interviewed either by themselves, in pairs or in groups. The data that was collected for this study was primary data, and the results of the study are mainly based on the experiences and opinions of the experts interviewed. The data collected does not cover the entire green textile industry within Finland, but study does however give a fairly comprehensive view of the phenomenon, as the textile industry in Finland is quite concise. The general findings of the study show that all experts from the companies interviewed agreed that a green brand identity does benefit their company in one way or the other. The findings also show contradictions with the older theory (eg. Charter et al. 1999, Pickett et al. 1995), and perhaps give a more modern view of the thoughts within the industry.

Planning the sustainable eco-city in Taipei: The implementation of green design and green building schemes

Taipei City has put a significant effort toward the implementation of green design and green building schemes towards a sustainable eco-city. Although some of the environmental indicators have not indicated significant progress in environmental improvement, implementing the two schemes has obtained considerable results; therefore, the two schemes are on the right path towards promoting a sustainable eco-city. However, it has to be admitted that the two schemes are a rather “technocratic” set of solutions and eco-centric approach. It is suggested that not only the public sector but also the private sector need to put more effort toward implement the schemes, and the government needs to encourage the private sector to adopt the schemes in practice.

Towards a holistic modelling framework for embodied carbon and waste in the building lifecycle

As the building industry proceeds in the direction of low impact buildings, research attention is being drawn towards the reduction of carbon dioxide emission and waste. Starting from design and construction to operation and demolition, various building materials are used throughout the whole building lifecycle involving significant energy consumption and waste generation. Building Information Modelling (BIM) is emerging as a tool that can support holistic design-decision making for reducing embodied carbon and waste production in the building lifecycle. This study aims to establish a framework for assessing embodied carbon and waste underpinned by BIM technology. On the basis of current research review, the framework is considered to include functional modules for embodied carbon computation. There are a module for waste estimation, a knowledge-base of construction and demolition methods, a repository of building components information, and an inventory of construction materials’ energy and carbon. Through both static 3D model visualisation and dynamic modelling supported by the framework, embodied energy (carbon), waste and associated costs can be analysed in the boundary of cradle-to-gate, construction, operation, and demolition. The proposed holistic modelling framework provides a possibility to analyse embodied carbon and waste from different building lifecycle perspectives including associated costs. It brings together existing segmented embodied carbon and waste estimation into a unified model, so that interactions between various parameters through the different building lifecycle phases can be better understood. Thus, it can improve design-decision support for optimal low impact building development. The applicability of this framework is anticipated being developed and tested on industrial projects in the near future.

New evidence on the green building rent and price premium

This paper investigates the effect of voluntary eco-certification on the rental and sale prices of US commercial office properties. Hedonic and logistic regressions are used to test whether there are rental and sale price premiums for LEED and Energy Star certified buildings. The results of the hedonic analysis suggest that there is a rental premium of approximately 6% for LEED and Energy Star certification. A sale price premium of approximately 35% was found for 127 price observations involving LEED rated buildings and 31% for 662 buildings involving Energy Star rated buildings. When compared to samples of similar buildings identified by a binomial logistic regression for LEED-certified buildings, the existence of a rent and sales price premium is confirmed albeit with differences regarding the magnitude of the premium. Overall, the results of this study confirm that LEED and Energy Star buildings exhibit higher rental rates and sales prices per square foot controlling for a large number of location- and property-specific factors.