Bankers' guide book, comprising 1190 questions and answers (with references) on legal banking problems and bank business-building methods,

Mode of access: Internet.

Indoor air quality in a public building following smoking bans

Introduction: Exposure to environmental tobacco smoke (ETS) is a major environmental risk factor. Indoor contaminants come from a variety of sources, which can include inadequate ventilation, volatile organic compounds (VOCs), biological agents, combustion products, and ETS. Because ETS is one of the most frequent causes of IAQ complaints as well as the high mortality of passive smoking, in June 2004 the University of Geneva made the decision to ban smoking inside the so called "Uni-Mail" building, the biggest Swiss University human science building of recent construction, and the ordinance was applied beginning in October 2004. This report presents the finding related to the IAQ of the "Uni-Mail" building before and after smoking bans using nicotine, suspended dust, condensate and PAHs level in air as tracers to perform an assessment of passive tobacco exposure for non-smokers inside the building. Methods: Respirable particles (RSP) A real time aerosol monitor (model DataRAM)was place at sampling post 1, level ground floor. Condensate It consists in extracting any organic matter taken on the glass fibre filters by MeOH, and then measuring the total absorbent of the MeOH extract to the UV wavelength of 447 nm. Nicotine Nicotine was taken by means of cartridges containing of XAD-4 to the fixed flow of 0.5 L/min. The analytical method used for the determination of nicotine is based on gas chromatography with Nitrogen selective detector GC-NPD. Results: Figure 1 shows the box plot density display of 3 parameters before and after smoking bans for all 7 sampling posts: dust, condensate and nicotine in air in μg/m3. Conclusion: Before the smoking ban, the level of the concentrations of respirable particles (RSP) is raised more, average of the day 320 μg/m3, with peaks of more than 1000 μg/m3, compared with the values of the surrounding air between 22 and 30 μg/m3. The nicotine level is definitely more important (average 5.53 μg/m3, field 1.5 to 17.9 μg/m3). Once the smoking bans inside the building were applied, one notes a clear improvement in terms of concentrations of pollutants. For dust, the concentration fell by 3 times (average: 130 μg/m3, range: 40 to 160 μg/m3) and that of nicotine by 10 times (average: 0.53 μg/m3, range: 0 to 1.69 μg/m3) compared to that found before smoking bans. The outdoor air RSP concentration was 22 μg/m3 or 10 times lower. Nicotine seems to be the best tracer for ETS free of interference, independent of location or season.

Foresight methodologies to understand changes in the labour process. Experience from Portugal

The foresight and scenario building methods can be an interesting reference for social sciences, especially in terms of innovative methods for labour process analysis. A scenario – as a central concept for the prospective analysis – can be considered as a rich and detailed portrait of a plausible future world. It can be a useful tool for policy-makers to grasp problems clearly and comprehensively, and to better pinpoint challenges as well as opportunities in an overall framework. The features of the foresight methods are being used in some labour policy making experiences. Case studies developed in Portugal will be presented, and some conclusions will be drawn in order to organise a set of principles for foresight analysis applied to the European project WORKS on the work organisation re-structuring in the knowledge society, and on the work design methods for new management structures of virtual organisations.

Orçamentação e Gestão da Reconstrução de uma Obra: Caso de estudo de um edifício

O presente relatório, desenvolvido no âmbito do estágio curricular realizado na Cociga-Construções Civis de Gaia, SA, tem como objetivo principal caracterizar as diversas etapas que constituem o desenvolvimento de uma obra, que consiste na reconstrução de um edifício. Para tal, procedeu-se à descrição e análise dos respetivos métodos organizacionais, construtivos e orçamentais aplicados na execução da obra para a Caetano Parts. O trabalho teve início com a caracterização da obra em questão e respetivo enquadramento espacial e regional. De seguida, foram descritas as principais etapas do desenvolvimento da obra, como concurso/adjudicação, preparação, contrato, execução e fecho da mesma. Não esquecendo que uma das tarefas mais importantes na fase inicial da obra, após a adjudicação, foi a organização da documentação necessária para que esta pudesse ter início. Na fase referente à execução, foram descritos de forma detalhada e acompanhados, em alguns casos, de registos de imagens, os procedimentos que constituíram as diferentes fases da obra, assim como os métodos construtivos correspondentes. O presente trabalho engloba o registo e a catalogação dos documentos necessários para as diferentes etapas da obra de reconstrução. Durante a realização das diferentes etapas e respetivo registo das mesmas, foi possível concluir que a boa qualidade da prestação de serviços por parte dos trabalhadores da empresa e dos subempreiteiros, possibilitou a concretização de uma obra com altos padrões de qualidade e de acordo com os objetivos do proprietário e da empresa responsável pela execução da mesma. Por último, a realização deste trabalho possibilitou o registo, análise e posterior reflexão sobre os procedimentos legais, logísticos e técnicos a ter em conta aquando da realização de uma obra e que são fatores fundamentais para que se possam manter os padrões de qualidade, rigor e sucesso da mesma.

Métodos construtivos de edifícios – comparação entre pré-fabricação e construção tradicional em betão armado

Em Portugal, a temática da Construção Pré-fabricada, enquanto método construtivo, ainda não se encontra desenvolvida de forma muito aprofundada. Na sua grande maioria, os trabalhos e estudos efetuados centram-se em aspetos de projeto e dimensionamento de determinados componentes préfabricados. Elementos estruturais pré-fabricados são já frequentemente utilizados, por exemplo, em vias de comunicação, pontes, viadutos, passagens inferiores e superiores. No entanto, no âmbito dos edifícios, esta tecnologia ainda não está totalmente explorada, exceção feita a naves industriais. A definição de construção pré-fabricada ainda não é consensual e as dúvidas subsistem, tanto por parte da população em geral, como dos próprios intervenientes no setor da construção. Dadas as suas potencialidades, pretende-se estudar a construção pré-fabricada, no setor dos edifícios, enquanto metodologia construtiva e compará-la com a metodologia de construção tradicional. Numa primeira fase, o trabalho irá consistir em explorar um conjunto de conceitos, métodos, tecnologias e materiais utilizados em alguns países com maior grau de aplicação destas técnicas. Posteriormente, será feita uma comparação entre construção pré-fabricada e construção tradicional, no que diz respeito a planeamento, prazos, custos, sustentabilidade, segurança ou qualidade, com base em estudos comparativos já realizados a nível internacional. Atendendo à informação recolhida, será realizado um trabalho onde são referidos processos, que poderão ajudar a compreender melhor o que é a construção pré-fabricada enquanto método construtivo inovador – quais as suas vantagens, implicações e condicionantes – e avaliar a sua viabilidade enquanto solução construtiva.

Organisaation asiakkuusosaamisen hallinta

Tutkielmassa tutkittiin organisaation asiakkuusosaamista suomalaisessa erikoistavarakaupassa. Tutkielman tärkeimpänä tavoitteena oli selvittää,mitä asiakkuusosaamisen hallinta on? Tutkimuksen tavoitteena oli myös luoda tutkimuksen case organisaatiolle asiakkuusosaamisen hallinnan malli. Tutkimuksen teoreettisessa osassa yhdistettiin sekä asiakaslähtöisen organisaation (customer orientation) että osaamisen johtamisen (competence-based management) keskustelujen piirissä syntyneitä teorioita ja malleja. Tutkimuksen teoreettisen viitekehyksen perusteella asiakkuusosaaminen koostuu asiakasorientaatiosta, asiakaskonfiguraatiosta ja asiakasinformaatiosta.Asiakkuusosaamisen hallinta puolestaan muodostuu asiakkuusosaamisen hyödyntämisestä, mittaamisesta ja rakentamisesta. Empiirinen tutkimus toteutettiin kvalitatiivisella teemahaastattelumenetelmällä. Tutkimuksen empiirisen osan tavoitteena oli selvittää kohdeorganisaation asiakkuusosaamisen tilaa ja käytössä olevia asiakkuusosaamisen hallinnan menetelmiä. Näistä menetelmistä keskeisimmät olivat asiakkuusosaamisen rakentamisen osalta ihmisten jatkuva kouluttaminen ja työssäoppiminen ja asiakkuusosaamisen hyödyntämisen osalta esimiestyön kehittäminen ja projektiorganisaation käyttäminen. Empiirisen tutkimuksen ja teoreettisen viitekehyksen avulla tutkimuksen case-organisaatiolle luotiin asiakkuusosaamisen hallinnan malli, jonka lähtökohtana on yrityksen asiakkuusstrategiat. Tämä malli koostuu organisaation systeemisestä kehittämisestä, asiakkuusprosessin kehittämisestä ja asiakkuusosaamisen hyödyntämisestä, mittaamisesta ja rakentamisesta osana käytännön työtä.

Técnicas construtivas avieiras : tradição e inovação no sistema palafítico

As barracas construídas pelos pescadores migrados de Vieira de Leiria para as margens do Tejo durante o século passado são representativas de uma cultura arquitetónica vernacular única. As edificações elevadas do solo com estacas ou pilares conferem às povoações Avieiras uma forte identidade arquitetónica, enfatizada pela inovação das técnicas construtivas adotadas. As três soluções para o embasamento de edificações palafíticas Avieiras documentadas neste artigo permitem identificar aspectos de continuidade e inovação face ao sistema construtivo dos palheiros da costa ocidental portuguesa, nos quais têm as suas raízes.

Origens e aplicações de recursos das companhias abertas industriais e comerciais no período 1980-1985

This research had for objective to fammi1iarize the user of accounting information to an efficient instrument in the modern financiaI ana1izes of eva1uation of entities: the Statement of Sources and App1ication of Resources. This statement goes on, ti11 today, to be 1ess used by the financiaI ana1ists because it is not understood concerning its objectives, concepts of Resources and shares of to bui1d and disc10sure the statement. During the period of time between 1980 and 1985 the Brazi1's economy spent of a situation of recession to another of prosperity and growth. In the first four years of the historiaI series, the country had a recession period and it was kept unti1 the end of 1983: the national private company increased its debt degree and decreased its 1iquidity. After 1984 the economy began to grow and that was pushed by the export entities: the entities decreased its debt degree and increased its 1iquidity. The Statement of Sources and Uses of Resources has been bui1t and pub1ished in United States since the 1ast 50 years of nineteenth century, and it has been known as Statement of Funds. In Brazi1 it has just introducted after the Security Exchange Law in 1976 that put 1imits for obrigatority to disc10sure by the companies. This 1aw described, summari1y, the objective, cQII1position and manner to disc1osure. The ma in objective of the statement is to show the financiaI position of the entity. This objective envolves aspects relationed to the long-term's strategy of the company because it disclosure the policy of application of resources in long-term assets, the policy of dividends that has been used, and the structure of resources provided by long-t:erm financing, the resources of the operations, and so on. There are several means of Resources. The concept more used in Brazil is Working Capital, till for orientation of the law. Concepts as Cash and Equivalent-Cash and Net Realizable Assets can be more informatives to the users because they show informations with better complexity, including informations concerning to the short-term. Concerning to the building methods, there are three that are known: the Transations Analizing method, the T-Account method and the Work-Sheet method. AlI of them are efficient, but it's recomendable that the method used can be in accordance with the disclosured formato The statement, despite of others statements, fell \

Análise do processo de execução de edificações compostas por paredes de concreto executadas in loco

This work presents a fast, easy, standardized and planned method to build family homes in order to collaborate with the decline of housing deficit and, at the same time, meet families who wish to invest in building their own houses, once that our country is experiencing an economical prosperity . This method has been widely used nowadays because it is being deployed in large-scale and in a standardized pattern, reducing decreasing significantly the construction time. The concrete wall, shaped in loco depends on unique processes. For this reason, a well trained staff is required so the constructive process can be executed in a fast pace, showing better results than other construction methods. This project will address all the materials used to build the molded concrete walls in loco, their sequence assembly, application, types, characteristics and performances. At the end, a way used by building companies of locating the concrete will also be given. Although there is no specific Brazilian norm for this type of construction, a study on this topic will soon be released. Therefore, the studies for the execution of this project were based on Brazilian standards prevailing at the time, construction magazines and books that are based on building methods considered more common

La costruzione razionale della casa. Scritti e progetti di Giuseppe Pagano

The rational construction of the house. The writings and projects of Giuseppe Pagano Description, themes and research objectives The research aims at analysing the architecture of Giuseppe Pagano, which focuses on the theme of dwelling, through the reading of 3 of his house projects. On the one hand, these projects represent “minor” works not thoroughly known by Pagano’s contemporary critics; on the other they emphasise a particular methodological approach, which serves the author to explore a theme closely linked to his theoretical thought. The house project is a key to Pagano’s research, given its ties to the socio-cultural and political conditions in which the architect was working, so that it becomes a mirror of one of his specific and theoretical path, always in a state of becoming. Pagano understands architecture as a “servant of the human being”, subject to a “utilitarian slavery” since it is a clear, essential and “modest” answer to specific human needs, free from aprioristic aesthetic and formal choices. It is a rational architecture in sensu stricto; it constitutes a perfect synthesis between cause and effect and between function and form. The house needs to accommodate these principles because it is closely intertwined with human needs and intimately linked to a specific place, climatic conditions and technical and economical possibilities. Besides, differently from his public and common masterpieces such as the Palazzo Gualino, the Istituto di Fisica and the Università Commerciale Bocconi, the house projects are representative of a precise project will, which is expressed in a more authentic way, partially freed from political influences and dogmatic preoccupations and, therefore, far from the attempt to research a specific expressive language. I believe that the house project better represents that “ingenuity”, freshness and “sincerity” that Pagano identifies with the minor architecture, thereby revealing a more authentic expression of his understanding of a project. Therefore, the thesis, by tracing the theoretical research of Pagano through the analysis of some of his designed and built works, attempts to identify a specific methodological approach to Pagano’s project, which, developed through time, achieves a certain clarity in the 1930s. In fact, this methodological approach becomes more evident in his last projects, mainly regarding the house and the urban space. These reflect the attempt to respond to the new social needs and, at the same time, they also are an expression of a freer idea of built architecture, closely linked with the place and with the human being who dwells it. The three chosen projects (Villa Colli, La Casa a struttura d’acciaio and Villa Caraccio) make Pagano facing different places, different customers and different economic and technical conditions, which, given the author’s biography, correspond to important historical and political conditions. This is the reason why the projects become apparently distant works, both linguistically and conceptually, to the point that one can define them as ”eclectic”. However, I argue that this eclecticism is actually an added value to the architectural work of Pagano, steaming from the use of a method which, having as a basis the postulate of a rational architecture as essence and logic of building, finds specific variations depending on the multiple variables to be addressed by the project. This is the methodological heritage that Pagano learns from the tradition, especially that of the rural residential architecture, defined by Pagano as a “dictionary of the building logic of man”, as an “a-stylistic background”. For Pagano this traditional architecture is a clear expression of the relationships between a theme and its development, an architectural “fact” that is resolved with purely technical and utilitarian aims and with a spontaneous development far from any aprioristic theoretical principle. Architecture, therefore, cannot be an invention for Pagano and the personal contribution of each architect has to consider his/her close relationship with the specific historical context, place and new building methods. These are basic principles in the methodological approach that drives a great deal of his research and that also permits his thought to be modern. I argue that both ongoing and new collaborations with younger protagonists of the culture and architecture of the period are significant for the development of his methodology. These encounters represent the will to spread his own understanding of the “new architecture” as well as a way of self-renewal by confronting the self with new themes and realities and by learning from his collaborators. Thesis’ outline The thesis is divided in two principal parts, each articulated in four chapters attempting to offer a new reading of the theory and work of Pagano by emphasising the central themes of the research. The first chapter is an introduction to the thesis and to the theme of the rational house, as understood and developed in its typological and technical aspects by Pagano and by other protagonists of the Italian rationalism of the 1930s. Here the attention is on two different aspects defining, according to Pagano, the house project: on the one hand, the typological renewal, aimed at defining a “standard form” as a clear and essential answer to certain needs and variables of the project leading to different formal expressions. On the other, it focuses on the building, understood as a technique to “produce” architecture, where new technologies and new materials are not merely tools but also essential elements of the architectural work. In this way the villa becomes different from the theme of the common house or from that of the minimalist house, by using rules in the choice of material and in the techniques that are every time different depending on the theme under exploration and on the contingency of place. It is also visible the rigorous rationalism that distinguishes the author's appropriation of certain themes of rural architecture. The pages of “Casabella” and the events of the contemporary Triennali form the preliminary material for the writing of this chapter given that they are primary sources to individuate projects and writings produced by Pagano and contemporary architects on this theme. These writings and projects, when compared, reconstruct the evolution of the idea of the rational house and, specifically, of the personal research of Pagano. The second part regards the reading of three of Pagano’s projects of houses as a built verification of his theories. This section constitutes the central part of the thesis since it is aimed at detecting a specific methodological approach showing a theoretical and ideological evolution expressed in the vast edited literature. The three projects that have been chosen explore the theme of the house, looking at various research themes that the author proposes and that find continuity in the affirmation of a specific rationalism, focussed on concepts such as essentiality, utility, functionality and building honesty. These concepts guide the thought and the activities of Pagano, also reflecting a social and cultural period. The projects span from the theme of the villa moderna, Villa Colli, which, inspired by the architecture of North Europe, anticipates a specific rationalism of Pagano based on rigour, simplicity and essentiality, to the theme of the common house, Casa a struttura d’acciaio, la casa del domani, which ponders on the definition of new living spaces and, moreover, on new concepts of standardisation, economical efficiency and new materials responding to the changing needs of the modern society. Finally, the third project returns to the theme of the, Villa Caraccio, revisiting it with new perspectives. These perspectives find in the solution of the open plant, in the openness to nature and landscape and in the revisiting of materials and local building systems that idea of the freed house, which express clearly a new theoretical thought. Methodology It needs to be noted that due to the lack of an official Archive of Pagano’s work, the analysis of his work has been difficult and this explains the necessity to read the articles and the drawings published in the pages of «Casabella» and «Domus». As for the projects of Villa Colli and Casa a struttura d’acciaio, parts of the original drawings have been consulted. These drawings are not published and are kept in private archives of the collaborators of Pagano. The consultation of these documents has permitted the analysis of the cited works, which have been subject to a more complete reading following the different proposed solutions, which have permitted to understand the project path. The projects are analysed thought the method of comparison and critical reading which, specifically, means graphical elaborations and analytical schemes, mostly reconstructed on the basis of original projects but, where possible, also on a photographic investigation. The focus is on the project theme which, beginning with a specific living (dwelling) typology, finds variations because of the historico-political context in which Pagano is embedded and which partially shapes his research and theoretical thought, then translated in the built work. The analysis of the work follows, beginning, where possible, from a reconstruction of the evolution of the project as elaborated on the basis of the original documents and ending on an analysis of the constructive principles and composition. This second phase employs a methodology proposed by Pagano in his article Piante di ville, which, as expected, focuses on the plant as essential tool to identify the “true practical and poetic qualities of the construction”(Pagano, «Costruzioni-Casabella», 1940, p. 2). The reading of the project is integrated with the constructive analyses related to the technical aspects of the house which, in the case of Casa a struttura d’acciaio, play an important role in the project, while in Villa Colli and in Villa Caraccio are principally linked to the choice of materials for the construction of the different architectural elements. These are nonetheless key factors in the composition of the work. Future work could extend this reading to other house projects to deepen the research that could be completed with the consultation of Archival materials, which are missing at present. Finally, in the appendix I present a critical selection of the Pagano’s writings, which recall the themes discussed and embodied by the three projects. The texts have been selected among the articles published in Casabella and in other journals, completing the reading of the project work which cannot be detached from his theoretical thought. Moving from theory to project, we follow a path that brings us to define and deepen the central theme of the thesis: rational building as the principal feature of the architectural research of Pagano, which is paraphrased in multiple ways in his designed and built works.

Houses built from accommodating cabins

The current economic crisis has meant, particularly in Spain, the almost cessation of new buildings construction. This deep crisis will mean in future an irreversible change in the Spanish construction model, based to date almost exclusively on the brick. After focusing on the Spanish property boom and examining its impact on the concept of housing (in a few years the house has moved forward from being contemplated exclusively as a primary good to be also considered a capital asset), we analyse the influence that this transformation has had on architecture (housing typology, building methods, the architectural profession and the architect training) and offers architectural alternatives –trough the university– to the present crisis. The project “Houses built from accommodating cabins” is part of a larger research within the line “Modular Architecture” developed by the Research Group “Design and Industrial Production”, belonging to the Technical University of Madrid, which aims to respond to the need for decent housing at an affordable price, by offering through Internet the plans, resources and other technical details required to build a house oneself. The proposed houses are built from the combination of industrially made modules (accommodation cabins, which are prefabricated modules usually used as provisional constructions in conventional building works), prefabricated subsystems and other catalogue components available on the market, all they set together by dry joints.

Molecular characterization of Thelastomatoidea (Nematoda : Oxyurida) from cockroaches in Australia

A molecular approach was used to genetically characterize 5 species (Aoruroides queenslandensis. Blattophila sphaerolaima, Cordonicola gibsoni, Desmicola ornato and Leidynemella fusiformis) belonging to the superfamily. Thelastomatoidea fi (Nematoda: Oxyurida), a group of pinworms that parasitizes terrestrial arthropods. The D3 domain of the large subunit Of nuclear ribosomal RNA (LSU) was sequenced for individual specimens, and the analysis of the sequence data allowed the genetic relationships of the 5 species to be studied dagger. The sequence variation in the D3 domain within individual species (0-1-8%) was significantly less than the differences among species (4(.)3-12(.)4%). Phylogenetic analyses, Using maximum parsimony, maximum likelihood, and neighbour-joining, tree-building methods, established relationships among the 5 species of Thelastomatoidea and Oxyuris equi (a species of the order Oxyurida). The molecular approach employed provides the prospect for developing DNA tools for the specific identification of the Thelastomatoidea, irrespective of developmental stage and sex, as a basis for systematic, ecological and/or population genetic investigations of members within this superfamily.

Development of benchmarks for operating costs and resources consumption to be used in healthcare building sustainability assessment methods

Since the last decade of the twentieth century, the healthcare industry is paying attention to the environmental impact of their buildings and therefore new regulations, policy goals and Buildings Sustainability Assessment (HBSA) methods are being developed and implemented. At the present, healthcare is one of the most regulated industries and it is also one of the largest consumers of energy per net floor area. To assess the sustainability of healthcare buildings it is necessary to establish a set of benchmarks related with their life-cycle performance. They are both essential to rate the sustainability of a project and to support designers and other stakeholders in the process of designing and operating a sustainable building, by allowing the comparison to be made between a project and the conventional and best market practices. This research is focused on the methodology to set the benchmarks for resources consumption, waste production, operation costs and potential environmental impacts related to the operational phase of healthcare buildings. It aims at contributing to the reduction of the subjectivity found in the definition of the benchmarks used in Building Sustainability Assessment (BSA) methods, and it is applied in the Portuguese context. These benchmarks will be used in the development of a Portuguese HBSA method.

Demonstrating the importance of criteria and sub-criteria in building assessment methods

Building assessment methods have become a popular research field since the early 1990s. An international tool which allows the assessment of buildings in all regions, taking into account differences in climates, topographies and cultures does not yet exist. This paper aims to demonstrate the importance of criteria and sub-criteria in developing a new potential building assessment method for Saudi Arabia. Recently, the awareness of sustainability has been increasing in developing countries due to high energy consumption, pollution and high carbon foot print. There is no debate that assessment criteria have an important role to identify the tool’s orientation. However, various aspects influence the criteria and sub-criteria of assessment tools such as environment, economic, social and cultural to mention but a few. The author provides an investigation on the most popular and globally used schemes: BREEAM, LEED, Green Star, CASBEE and Estidama in order to identify the effectiveness of the different aspects of the assessment criteria and the impacts of these criteria on the assessment results; that will provide a solid foundation to develop an effective sustainable assessment method for buildings in Saudi Arabia. Initial results of the investigation suggest that each country needs to develop its own assessment method in order to achieve desired results, while focusing upon the indigenous environmental, economic, social and cultural conditions. Keywords: Assessment methods, BREEAM, LEED, Green Star, CASBEE, Estidama, sustainability, sustainable buildings, Environment, Saudi Arabia.