Construction cost and energy consumption resulting from energy retrofitting in an apartment building in Madrid (Spain).

This theoretical study analyzes the relation between the measures necessesary for the energy retrofitting of a residential building constructed in Madrid, their cost and the improvement of the energy rating of the dwellings. The aim of this work is to establish an evaluation methodology that allows developers and architects to obtain conclusions and orientates therm in the decisioin-making process. It will allow finding the most suitable cost-effective solutions in each case. This paper describes the methodology and the findings obtained. Energy retrofitting and the improvement of the energy behaviour of the building depend on the selection of the retrofitting solutions and also on the investment. In this case study to achieve the best energy rates it is necessary to improve the thermal performance of the envelope as well as the energy systems. Energy retrofitting means an increase in property value but it can't only be considered in economic terms. It is necessary to take into account unquantifiable aspects as increased comfort, improved sound insulation, livability, health, or the elimination of energy poverty situations.

Validación de sistemas constructivos de los cerramientos de la edificación mediante la aplicación de los métodos de decisión multicriterio : aplicación al catálogo de elementos constructivos del Código Técnico de la Edificación

Como punto de partida para el desarrollo de la Tesis, se mantiene la hipótesis de que es posible establecer métodos de evaluación global sobre el grado de utilidad de los sistemas constructivos correspondientes a los cerramientos de la edificación. Tales métodos habrían de posibilitar, de entre una serie finita de sistemas alternativos, cuáles de ellos son los objetivamente más adecuados para su selección en un entorno de decisión concreto, y habrían de permitir fundamentar la justificación objetiva de tal decisión. Paralelamente a esta hipótesis de carácter general, se planteó desde el inicio la necesidad de comprobación de una hipótesis de partida particular según la cual los sistemas constructivos basados en la utilización de componentes prefabricados, o procesos de puesta en obra con un alto grado de industrialización arrojarían valores de utilidad mayores que los sistemas tradicionales basados en la albañilería. Para la verificación de estas dos hipótesis de partida se ha procedido inicialmente a la selección de un conjunto coherente de doce sistemas de cerramientos de la edificación que pudiese servir como testigo de su diversidad potencial, para proceder a su valoración comparativa. El método de valoración propuesto ha entrado a considerar una serie de factores de diversa índole que no son reducibles a un único parámetro o magnitud que permitiese una valoración de tipo lineal sobre su idoneidad relativa, ni que permitiese establecer un grado de prelación entre los distintos sistemas constructivos alternativos de manera absoluta. Para resolver este tour de force o desafío metodológico se ha acudido a la aplicación de metodologías de valoración que nos permitiesen establecer de forma racional dicha comparativa. Nos referimos a una serie de metodologías provenientes en primera instancia de las ciencias exactas, que reciben la denominación de métodos de ayuda a la decisión multicriterio, y en concreto el denominado método ELECTRE. Inicialmente, se ha planteado la aplicación del método de análisis sobre doce sistemas constructivos seleccionados de tal forma que representasen de forma adecuada las tres categorías establecidas para caracterizar la totalidad de sistemas constructivos posibles; por peso, grado de prefabricación y grado de ventilación. Si bien la combinación de las tres categorías básicas anteriormente señaladas produce un total de 18 subcategorías conceptuales, tomamos finalmente doce subcategorías dado que consideramos que es un número operativo suficiente por extenso para el análisis propuesto y elimina tipos no relevantes. Aplicado el método propuesto, a estos doce sistemas constructivos “testigo”, se constata el mayor grado de utilidad de los sistemas prefabricados, pesados y no ventilados. Al hilo del análisis realizado en la Parte II de la Tesis sobre los doce sistemas constructivos “testigo”, se ha realizado un volcado de los sistemas constructivos incluidos en el Catalogo de Elementos Constructivos del CTE (versión 2010) sobre las dieciocho subcategorías definidas en dicha Parte II para caracterizar los sistemas constructivos “testigo”. Posteriormente, se ha procedido a una parametrización de la totalidad de sistemas constructivos para cerramientos de fachadas incluidos en este Catálogo. La parametrización sistemática realizada ha permitido establecer, mediante el cálculo del valor medio que adoptan los parámetros de los sistemas pertenecientes a una misma familia de las establecidas por el Catálogo, una caracterización comparativa del grado de utilidad de dichas familias, tanto en lo relativo a cada uno de los parámetros como en una valoración global de sus valores, de carácter indicativo. Una vez realizada una parametrización completa de la totalidad de sistemas constructivos incluidos en el Catálogo, se ha realizado una simulación de aplicación de la metodología de validación desarrollada en la Parte II de la presente Tesis, con el objeto de comprobar su adecuación al caso. En conclusión, el desarrollo de una herramienta de apoyo a la decisión multicriterio aplicada al Catálogo de Elementos constructivos del CTE se ha demostrado técnicamente viable y arroja resultados significativos. Se han diseñado dos sistemas constructivos mediante la aplicación de la herramienta desarrollada, uno de fachada no ventilada y otro de fachada ventilada. Comparados estos dos sistemas constructivos mejorados con otros sistemas constructivos analizados Se comprueba el alto grado de utilidad objetiva de los dos sistemas diseñados en relación con el resto. La realización de este ejercicio de diseño de un sistema constructivo específico, que responde a los requerimientos de un decisor concreto viene a demostrar, así pues, la utilidad del algoritmo propuesto en su aplicación a los procesos de diseño de los sistemas constructivos. La tesis incorpora dos innovaciones metodológicas y tres innovaciones instrumentales. ABSTRACT The starting point for the thesis is the hypothesis that it is possible to devise suitability degree evaluation methods of building enclosure systems. Such methods should allow optimizing appraisal, given a specific domain of decision, among a finite number of alternative systems, and provide objective justification of such decision. Along with the above mentioned general assumption, a second hypothesis whereby constructive systems based on the use of prefabricated components, or high industrialization degree work processes, would throw efficiency values higher than traditional masonry systems needed to be tested. In order to validate these two hypothesis a coherent set of twelve enclosure systems that could serve as a reference sample of their potential diversity was selected and a comparative evaluation was carried out. The valuation method proposed has considered several different factors that are neither reducible to a single parameter or magnitude that would allow a linear evaluation of their relative suitability nor allow to establishing an absolute priority ranking between different alternative constructive systems. In order to resolve this tour de force or methodological challenge, valuation methodologies that enable use establishing rational assessments were used. We are referring to a number of methodologies taken from the exact sciences field, usually known as aid methods for multi-criteria decision, in particular the so-called ELECTRE method. Even though the combination of the mentioned three basic categories result in eighteen conceptual sub categories, we are finally considering just twelve since we deem it adequately extended for the our intended purpose and eliminates non relevant instances. The method of analysis was initially applied to the set of twelve selected constructive systems is a way that they could represent adequately the three previously established categories set out to characterize all possible enclosure systems, namely weight, prefabrication degree and ventilation degree. Once the proposed method is applied to the sample systems, the higher efficiency of the prefabricated, heavy and not ventilated systems was confirmed. In line with the analysis in Part II of the thesis on the twelve chosen enclosure systems, it has done an uploading data of construction systems listed in the Catalogue of constructive elements of the CTE (version 2010) according the eighteen subcategories used in this part II to characterize the construction systems taken as sample. Subsequently, a parameterization of all enclosure facade systems included in this catalog has been undertaken. The systematic parameterization has allowed to set, by means of calculating the average values of the parameters of the systems belonging to the same family of those established by the Catalog, a comparative characterization of the efficiency degree of these families, both in relation to each parameter as to an overall evaluation of its values, in a indicative way. After the parameterization of all enclosure systems included in the Catalog, a simulation of validation methodology application developed in Part II of this Thesis has been made, in order to assess its consistency to the referred case. In conclusion, the development of a multi-criteria decision aid tool, applied to the CTE Catalog of constructive elements, has proved to be technically feasible and yields significant results. Two building systems through the application of the developed tool, a non-ventilated façade and a ventilated façade have been designed. Comparing these two improved construction systems with other building systems analyzed, we were able to assess the high degree of objective efficiency of the two systems designed in relation to the rest. The exercise of designing a specific enclosure system that meets the requirements of a particular decision-maker hence shows the suitability of the proposed algorithm applied to the process of enclosure systems design. This Thesis includes two methodological innovations and three instrumental innovations.

Los cerramientos verticales de Jean Prouvé variables de intercambio con el exterior

A finales del siglo XIX y principios del XX, la aparición de nuevos materiales, como el acero y el hormigón armado, y la experimentación en procedimientos industriales provocan un cambio en el concepto de cerramiento y en la forma de construir. La fachada se libera y se independiza de la estructura principal, y el nuevo cerramiento debe responder a los principios arquitectónicos y constructivos de este momento. Se busca, por tanto, un cerramiento nuevo. Un cerramiento ligero, de poco peso, de poco espesor, autoportante, multicapa, montado en seco, de grandes dimensiones y que cumpla las exigencias de todo cerramiento. Se puede afirmar que, hasta que Jean Prouvé experimenta con distintos materiales y sistemas de fabricación, la técnica de los cerramientos ligeros no se desarrolla por completo. En sus trabajos se pueden encontrar aplicaciones de los nuevos materiales y nuevas técnicas, e investigaciones sobre prefabricación ligera en acero y aluminio, en un intento de aplicar la producción industrial y en serie a la construcción. Esta Tesis realiza un análisis en profundidad, tanto gráfico como escrito, de los cerramientos verticales desarrollados por Jean Prouvé, sin tratarlos como objetos aislados, entendiendo que forman parte de una obra arquitectónica concreta y completa. Dicho análisis sirve para clasificarlos según las funciones esenciales que debe garantizar un cerramiento: aislar, iluminar, ventilar y proteger, y para comprender cuáles son las claves, los recursos e intenciones, utilizadas por el autor para conseguir este propósito. El resultado de la investigación se plasma de dos formas diferentes. En la primera, se realizan reflexiones críticas para extraer los temas importantes de los elementos analizados, lo que posibilita el acercamiento a otros arquitectos y ampliar el campo de visión. En la segunda, de tipo gráfico, se elabora un atlas de los distintos tipos de cerramientos verticales desarrollados por Jean Prouvé. ABSTRACT In the late nineteenth and the early twentieth century, the appearance of new materials, like steel or reinforced concrete, and the experimentation in industrial procedures cause a change in the concept of façade and in the way of build. The façade is released and become independent of the main structural frame, and the new building enclosure must answer the architectural and construction principles of that moment. A new façade is therefore looked for. A light, thin, self supported, multi layer, dry mounted and big dimensions façade that meet the exigencies of all building enclosure. You can ensure that until Jean Prouvé experiment with several materials and fabrication systems, the light façade technic does not develop completely. In his work we can find new materials applications and new technics and studies about light prefabrication with steel and aluminium, in an attempt of apply the mass production to construction. This Thesis carries out a deep analysis, graphic and written, of the vertical enclosure panels of Jean Prouvé’s work. This is made without studying them like isolated objects, but understanding that they are part of a particular architectural work, as a whole. The analysis is used for classify the panels according to main functions that a façade must satisfy: isolate, light up, ventilate and protect. And also to understand which are the keys, the resources and intentions used by Prouvé to achieve this goal. The result of the research is presented in two different ways. In the first one, a critical reflection is made in order to extract the important issues of the analyzed elements. That makes possible the approach to other architects and gives us a bigger range of vision. In the second, graphic, an atlas of the different types of vertical façade panels of Jean Prouvé is made.

Aplicación del dibujo arquitectónico en 3D para el análisis histórico de los sistemas constructivos industrializados

La condición tridimensional de la construcción edificatoria precisa del uso del dibujo en 3D como la mejor herramienta de proyecto y transmisión de conocimientos técnicos y formales. El objetivo de esta comunicación es mostrar la aplicación de la expresión gráfica en 3D en un análisis histórico sobre la evolución de la envolvente industrializada en arquitectura, identificando sus principales condicionantes técnicos y constructivos. El estudio compara la evolución del uso de sistemas constructivos industrializados mediante un análisis gráfico de las soluciones constructivas más destacables. La metodología empleada se basa en la identificación y estudio de determinados sistemas constructivos industrializados compuestos por materiales ligeros así como de obras de arquitectura representativas por su influencia en la evolución de la envolvente arquitectónica en la segunda mitad del siglo XX. La representación gráfica en 3D ayuda a comparar las obras analizadas desde aspectos tecnológicos y formales, constatándose la utilidad del dibujo asistido por ordenador en el análisis constructivo realizado. En conclusión, el uso del dibujo arquitectónico en 3D contribuye, por la mejor comprensión de las características espaciales de las soluciones constructivas, al análisis de las propiedades materiales y funcionales de los sistemas constructivos industrializados y su aplicación al diseño arquitectónico, ayudando a perfeccionar su conocimiento e incrementando la calidad constructiva y compromiso social de las propuestas arquitectónicas.

Functionalized adamantane: Building blocks for nanostructure self-assembly

We report first-principles calculations on the electronic and structural properties of chemically functionalized adamantane molecules, either in isolated or crystalline forms. Boron and nitrogen functionalized molecules, aza-, tetra-aza-, bora-, and tetra-bora-adamantane, were found to be very stable in terms of energetics, consistent with available experimental data. Additionally, a hypothetical molecular crystal in a zincblende structure, involving the pair tetra-bora-adamantane and tetra-aza-adamantane, was investigated. This molecular crystal presented a direct and large electronic band gap and a bulk modulus of 20 GPa. The viability of using those functionalized molecules as fundamental building blocks for nanostructure self-assembly is discussed.

Building a Open Source Framework for Virtual Medical Training

This paper presents a framework to build medical training applications by using virtual reality and a tool that helps the class instantiation of this framework. The main purpose is to make easier the building of virtual reality applications in the medical training area, considering systems to simulate biopsy exams and make available deformation, collision detection, and stereoscopy functionalities. The instantiation of the classes allows quick implementation of the tools for such a purpose, thus reducing errors and offering low cost due to the use of open source tools. Using the instantiation tool, the process of building applications is fast and easy. Therefore, computer programmers can obtain an initial application and adapt it to their needs. This tool allows the user to include, delete, and edit parameters in the functionalities chosen as well as storing these parameters for future use. In order to verify the efficiency of the framework, some case studies are presented.

Dimension stone for building facades: methodology for structural design

The importance of a careful selection of rocks used in building facade cladding is highlighted. A simple and viable methodology for the structural detailing of dimension stones and the verification of the global performance is presented based on a Strap software simulation. The results obtained proved the applicability of the proposed structural dimensioning methodology which represents an excellent simple tool for dimensioning rock slabs used for building facade cladding. The Strap software satisfactorily simulated the structural conditions of the stone slabs under the studied conditions, allowing the determination of alternative slab dimensions and the verification of the cladding strength at the support.

Performance evaluation of dual-flush WC cistern in a multifamily building in Brazil

The performance assessment as to water consumption in WC cisterns has contributed to the development of flushing system technologies, which allow smaller flushing volumes. The purpose of this work is to assess the performance of the the low water consumption requirement of WC cisterns with dual flushing system (6/3L), when compared to 6L flushing volume WC cisterns in multifamily buildings. The research methodology consisted of a case study in a multifamily residential building with submetering system, by monitoring the total water consumption and the two flushing systems using water meters installed in WC cisterns. By means of a mathematical model, a comparison of the design flowrate in the main branch was carried out considering the two types of WC cisterns. The results indicated that the water consumption in the 6L WC cistern was 20% in relation to the total domestic consumption, whereas the water consumption observed in the dual-flush WC cistern (6/3L) was 16%. The dual flushing system (6/3L) presented about 18% consumption reduction impact as compared to the 6 L system. The design flowrate values in the main branch, obtained by the mathematical model, were 0.35 L/s for systems with 6 L WC cistern and 0.34 L/s with dual-flush WC cistern (6/3 L), that is, a reduction of similar to 3%. Practical application: The knowledge of the performance in field of dual-flush WC cistern contributes to industry to improve this system and to users to aid their choice of technologies aimed at water conservation, and so assisting to the development of sustainable buildings.

Modeling of Distributed Control Systems in Intelligent Building based on Colored Petri Nets

Distributed control systems consist of sensors, actuators and controllers, interconnected by communication networks and are characterized by a high number of concurrent process. This work presents a proposal for a procedure to model and analyze communication networks for distributed control systems in intelligent building. The approach considered for this purpose is based on the characterization of the control system as a discrete event system and application of coloured Petri net as a formal method for specification, analysis and verification of control solutions. With this approach, we develop the models that compose the communication networks for the control systems of intelligent building, which are considered the relationships between the various buildings systems. This procedure provides a structured development of models, facilitating the process of specifying the control algorithm. An application example is presented in order to illustrate the main features of this approach.

Comparison between detailed model simulation and artificial neural network for forecasting building energy consumption

There are several ways to attempt to model a building and its heat gains from external sources as well as internal ones in order to evaluate a proper operation, audit retrofit actions, and forecast energy consumption. Different techniques, varying from simple regression to models that are based on physical principles, can be used for simulation. A frequent hypothesis for all these models is that the input variables should be based on realistic data when they are available, otherwise the evaluation of energy consumption might be highly under or over estimated. In this paper, a comparison is made between a simple model based on artificial neural network (ANN) and a model that is based on physical principles (EnergyPlus) as an auditing and predicting tool in order to forecast building energy consumption. The Administration Building of the University of Sao Paulo is used as a case study. The building energy consumption profiles are collected as well as the campus meteorological data. Results show that both models are suitable for energy consumption forecast. Additionally, a parametric analysis is carried out for the considered building on EnergyPlus in order to evaluate the influence of several parameters such as the building profile occupation and weather data on such forecasting. (C) 2008 Elsevier B.V. All rights reserved.

On Building a Memory Evolutive System for Application to Learning and Cognition Modeling

We address here aspects of the implementation of a memory evolutive system (MES), based on the model proposed by A. Ehresmann and J. Vanbremeersch (2007), by means of a simulated network of spiking neurons with time dependent plasticity. We point out the advantages and challenges of applying category theory for the representation of cognition, by using the MES architecture. Then we discuss the issues concerning the minimum requirements that an artificial neural network (ANN) should fulfill in order that it would be capable of expressing the categories and mappings between them, underlying the MES. We conclude that a pulsed ANN based on Izhikevich`s formal neuron with STDP (spike time-dependent plasticity) has sufficient dynamical properties to achieve these requirements, provided it can cope with the topological requirements. Finally, we present some perspectives of future research concerning the proposed ANN topology.

West elevation, Neville Bonner Building, Brisbane

Riverside Expressway building, Expressway on right.