Adopting building information modeling (BIM) as collaboration platform in the design industry

This paper discusses the preliminary findings of an ongoing research project aimed at developing a technological, operational and strategic analysis of adopting BIM in AEC/FM (Architecture-Engineering-Construction/Facility Management) industry as a collaboration tool. Outcomes of the project will provide specifications and guidelines as well as establish industry standards for implementing BIM in practice. This research primarily focuses on BIM model servers as a collaboration platform, and hence the guidelines are aimed at enhancing collaboration capabilities. This paper reports on the findings from: (1) a critical review of latest BIM literature and commercial applications, and (2) workshops with focus groups on changing work-practice, role of technology, current perception and expectations of BIM. Layout for case studies being undertaken is presented. These findings provide a base to develop comprehensive software specifications and national guidelines for BIM with particular emphasis on BIM model servers as collaboration platforms.

Building Information Modeling (BIM)

Los procesos de diseño y construcción tradicionales de la industria de la construcción que se han conservado inalterados durante años, han impedido vislumbrar los impactos positivos que se pueden dar al trabajar en conjunto con las tecnologías de información -- El miedo al cambio hace que las empresas del sector denominen “normal” a la fragmentación del proceso constructivo, y presupuesten desde el inicio de la obra atrasos por incompatibilidades en los diseños causados principalmente por la falta de comunicación y coordinación entre los diferentes participantes del proyecto -- La implementación de tecnologías de información busca no sólo ayudar como una herramienta a los diseños del proyecto, sino que también ofrece elementos para integrar a los participantes y contratistas del proyecto en un equipo de trabajo donde exista mayor interoperabilidad entre las áreas implicadas en el planteamiento, diseño y ejecución del proyecto, y se pueda disminuir de sobremanera la fragmentación que vuelve tan poco competitiva esta industria a nivel mundial -- En el presente trabajo de grado se realizó un estado del arte de la tecnología de información BIM con el fin de sintetizar las enormes cantidades de información disponibles y de posibilitar una mejor comprensión de este -- Con la teoría y los manuales estudiados a profundidad de los software que componen esta tecnología, se procedió a desarrollar un ejercicio exploratorio confrontando los conocimientos adquiridos teóricos con la parte práctica, parte en donde se pudieron vislumbrar las ventajas y desventajas al implementar este software en la industria de la construcción de nuestro país -- Finalmente se exponen los requerimientos y limitaciones que trae consigo la aplicación de esta tecnología a los proyectos de construcción

Building Information Modeling (BIM) in Iran: an exploratory study

BIM has received considerable attention from academics and innovative construction companies in recent years within the Iranian context. However, there is a conspicuous lack of studies, which give a picture of the current state of BIM in Iran. To address this gap in the body of the knowledge, this study intends to present an account on the current state of BIM with a focus on barriers and drivers associated with its adoption in Iran based on the perceptions of Iranian construction practitioners. Drawing upon a questionnaire survey completed by 44 construction practitioners and through deploying data visualization alongside statistical analyses, it came to light that industry practitioners in Iran are inexperienced as to BIM’s use and the level of BIM implementation in the country is at the lowest level of BIM maturity. That is, 29.5% of construction companies are involved in some level of BIM adoption whereas 56.8% have had no exposure to BIM and 36.4% do not even have any plans to adopt BIM in the near future. The findings also showed that the highest ranked barriers to adoption of BIM in Iran are almost entirely associated with the structure of the Iranian market, the nature of the construction industry and the predominant business environment in the country as well as lack of attention by policy makers and the government. On the other hand, major drivers were found to be associated with monetary gains and enhancing competitiveness in the market. The clear message is that widespread adoption of BIM in Iran will not occur in the absence of a supportive regulatory environment and financial assistance by policy makers. The paper contributes to the field by sharing the preliminary findings of the first study conducted on BIM adoption in Iran, which provides a sound basis for further inquiries on the topic.

Building information modeling in the Australian architecture engineering and construction industry

Building Information Modeling (BIM) is a modern approach to the design, documentation, delivery, and life cycle management of buildings through the use of project information databases coupled with object-based parametric modeling. BIM has the potential to revolutionize the Architecture, Engineering and Construction (AEC) industry in terms of the positive impact it may have on information flows, working relationships between project participants from different disciplines and the resulting benefits it may achieve through improvements to conventional methods. This chapter reviews the development of BIM, the extent to which BIM has been implemented in Australia, and the factors which have affected the up-take of BIM. More specifically, the objectives of this chapter are to investigate the adoption of BIM in the Australian AEC industry and factors that contribute towards the uptake (or non uptake) of BIM. These objectives are met by a review of the related literature in the first instance, followed by the presentation of the results of a 2007 postal questionnaire survey and telephone interviews of a random sample of professionals in the Australian AEC industry. The responses suggest that less than 25 percent of the sample had been involved in BIM – rather less than might be expected from reading the literature. Also, of those who have been involved with BIM, there has been very little interdisciplinary collaboration. The main barriers impeding the implementation of BIM widely across the Australian AEC industry are also identified. These were found to be primarily a lack of BIM expertise, lack of awareness and resistance to change. The benefits experienced as a result of using BIM are also discussed. These include improved design consistency, better coordination, cost savings, higher quality work, greater productivity and increased speed of delivery. In terms of conclusion, some suggestions are made concerning the underlying practical reasons for the slow up-take of BIM and the successes for those early adopters. Prospects for future improvement are discussed and proposals are also made for a large scale worldwide comparative study covering industry-wide participants

The Interaction of lean and building information modeling in construction

Lean construction and building information modeling (BIM) are quite different initiatives, but both are having profound impacts on the construction industry. A rigorous analysis of the myriad specific interactions between them indicates that a synergy exists which, if properly understood in theoretical terms, can be exploited to improve construction processes beyond the degree to which it might be improved by application of either of these paradigms independently. Using a matrix that juxtaposes BIM functionalities with prescriptive lean construction principles, 56 interactions have been identified, all but four of which represent constructive interaction. Although evidence for the majority of these has been found, the matrix is not considered complete but rather a framework for research to explore the degree of validity of the interactions. Construction executives, managers, designers, and developers of information technology systems for construction can also benefit from the framework as an aid to recognizing the potential synergies when planning their lean and BIM adoption strategies.

Early Implementation of Building Information Modeling into a Cold-Formed Steel Company: Providing Novel Project Management Techniques and Solutions to Industry

The ability of building information modeling (BIM) to positively impact projects in the AEC through greater collaboration and integration is widely acknowledged. This paper aims to examine the development of BIM and how it can contribute to the cold-formed steel (CFS) building industry. This is achieved through the adoption of a qualitative methodology encompassing a literature review, exploratory interviews with industry experts, culminating in the development of e-learning material for the sector. In doing so, the research team have collaborated with one of the United Kingdom’s largest cold-formed steel designer/fabricators. By demonstrating the capabilities of BIM software and providing technical and informative videos in its creation, this project has found two key outcomes. Firstly, to provide invaluable assistance in the transition from traditional processes to a fully collaborative 3D BIM as required by the UK Government under the “Government Construction Strategy” by 2016 in all public sector projects. Secondly, to demonstrate BIM’s potential not only within CFS companies, but also within the AEC sector as a whole. As the flexibility, adaptability and interoperability of BIM software is alluded to, the results indicate that the introduction and development of BIM and the underlying ethos suggests that it is a key tool in the development of the industry as a whole.

Building information modeling based building design optimization for sustainability

Environmental problems, especially climate change, have become a serious global issue waiting for people to solve. In the construction industry, the concept of sustainable building is developing to reduce greenhouse gas emissions. In this study, a building information modeling (BIM) based building design optimization method is proposed to facilitate designers to optimize their designs and improve buildings’ sustainability. A revised particle swarm optimization (PSO) algorithm is applied to search for the trade-off between life cycle costs (LCC) and life cycle carbon emissions (LCCE) of building designs. In order tovalidate the effectiveness and efficiency of this method, a case study of an office building is conducted in Hong Kong. The result of the case study shows that this method can enlarge the searching space for optimal design solutions and shorten the processing time for optimal design results, which is really helpful for designers to deliver an economic and environmental friendly design scheme.

The contribution of Building Information Modelling (BIM) to Green Building Design and Assessment in Abu Dhabi "ESTIDAMA"

Estidama is a mandatory Green Building code in Abu Dhabi by which the compliance of building design is being assessed. This paper examines the current design and assessment approaches for Green Buildings to identify the reasons that lead to delay defects and it investigates a new approach for improvement. The available literature provides a realistic understanding to the problems and shows the road to some potential solutions. The identified problems were mainly attributed to the manual assessment with too much human interference. The piled documents with limited resources left the assessment system too slow to handle the whole projects within the greater Abu Dhabi engendering high risk of the commitment to review mistakes. Therefore, this paper investigates the potentiality of automating several stages via the use of Building Information Modeling (BIM) into the assessment process. Different experienced participants from all aspects within the construction industry were interviewed to contribute to the research. Also, a close question questionnaire was distributed to examine the current practice in Abu Dhabi to compare it with the initial findings. The findings point out significant requirements to adopt BIM in the assessment process, such as the availability of proper contracts form to shape the relationship between BIM parties and the readiness of the current system. Hence, the authors suggest a new model that integrates BIM capabilities within the system to accelerate the process and reduce human involvement.

The application of building information modeling to enhance organisational learning

The construction industry is a knowledge-based industry where various actors with diverse expertise create unique information within different phases of a project. The industry has been criticized by researchers and practitioners as being unable to apply newly created knowledge effectively to innovate. The fragmented nature of the construction industry reduces the opportunity of project participants to learn from each other and absorb knowledge. Building Information Modelling (BIM), referring to digital representations of constructed facilities, is a promising technological advance that has been proposed to assist in the sharing of knowledge and creation of linkages between firms. Previous studies have mainly focused on the technical attributes of BIM and there is little evidence on its capability to enhance learning in construction firms. This conceptual paper identifies six ‘functional attributes’ of BIM that act as triggers to stimulate learning: (1) comprehensibility; (2) predictability; (3) accuracy; (4) transparency; (5) mutual understanding and; (6) integration.

Requirements for building information modeling based lean production management systems for construction

Smooth flow of production in construction is hampered by disparity between individual trade teams' goals and the goals of stable production flow for the project as a whole. This is exacerbated by the difficulty of visualizing the flow of work in a construction project. While the addresses some of the issues in Building information modeling provides a powerful platform for visualizing work flow in control systems that also enable pull flow and deeper collaboration between teams on and off site. The requirements for implementation of a BIM-enabled pull flow construction management software system based on the Last Planner System™, called ‘KanBIM’, have been specified, and a set of functional mock-ups of the proposed system has been implemented and evaluated in a series of three focus group workshops. The requirements cover the areas of maintenance of work flow stability, enabling negotiation and commitment between teams, lean production planning with sophisticated pull flow control, and effective communication and visualization of flow. The evaluation results show that the system holds the potential to improve work flow and reduce waste by providing both process and product visualization at the work face.

Building Information Modeling: analisi e utilizzo

Dalla raffigurazione artistica fino alla modellazione digitale, passando per il disegno tecnico, la rappresentazione del progetto d’architettura ha conosciuto nel tempo evoluzioni significative che solo di recente hanno raggiunto l’apice nell’utilizzo di modelli cognitivi in grado di collezionare ed organizzare il patrimonio di informazioni che gravitano attorno all’intero processo edilizio. L’impiego sempre più diffuso dello strumento informatico, insieme al coordinamento delle specializzazioni nelle molte discipline coinvolte nel progetto, ha favorito negli ultimi anni l’adozione del Building Information Modeling un processo che permette di rivoluzionare il mondo delle costruzioni, coprendo molteplici aspetti del ciclo di vita per un manufatto edilizio. Questa Tesi intende presentare in maniera specifica le tappe che hanno consentito il formarsi del BIM. La migliore capacità di gestione, un linguaggio comune tra i progettisti, un’ottimizzazione di risorse e costi, unito ad un controllo convincente ed accurato delle fasi di lavoro, sono alcune delle potenzialità non ancora completamente espresse dal Building Information Modeling che è destinato a divenire una consapevolezza strategica nel bagaglio culturale del professionista contemporaneo.

La digitalizzazione del processo costruttivo: la strategia Building Information Modeling and Management (BIMM) applicata ad un caso di studio di edilizia scolastica.

L’obiettivo della tesi è quello di fare una panoramica sulla strategia BIM e quindi sulla digitalizzazione del processo costruttivo. Grazie alla analisi di un caso di studio, altro obiettivo è quello di analizzare e valutare la metodologia BIM 4D/5D, ossia la gestione dei tempi e dei costi di realizzazione dell’opera. Nella prima fase si affronta il tema del BIM, con una analisi sull’evoluzione degli strumenti di elaborazione e rappresentazione digitale del progetto architettonico, su come questi strumenti si differenzino sia dal punto di vista operativo che concettuale rivoluzionando il flusso di lavoro odierno. Quindi, partendo da un’analisi che e ritrae l’estrema frammentazione del settore delle costruzioni, si va ad analizzare come il BIM aumenti e favorisca la collaborazione delle parti interessate, armonizzando l’intero processo costruttivo dell’opera. Si prosegue con l'esame della diffusione e del livello di maturità degli strumenti BIM, di come i privati e le amministrazioni pubbliche, a livello mondiale, stiano spingendo per favorire l’adozione della metodologia BIM. Inoltre si analizzano le dinamiche dell’interoperabilità, delle metodologie e protocolli di interscambio dati, che sono un elemento chiave per il successo del BIM per via dei numerosi strumenti, specializzati nelle varie discipline del settore edile. Nella terza parte, dedicata al Project Management di un caso di studio, si verifica la bontà delle metodologie teorizzate attraverso la realizzazione di un modello virtuale in Revit. Dal modello realizzato dal laureando sono estrapolate le informazioni necessarie alla gestione, e tramite il software STRVison CPM, si elaborano i principali documenti per la progettazione e gestione del cantiere: il CM, il CME, i tempi operativi, il cronoprogramma Gantt. Obbiettivo è constatare l’effettivo livello di maturità della strategia BIM 4D e 5D e la reale possibilità di un impiego capillare nel panorama italiano del settore delle costruzioni.

Research and application of Building Information Modelling (BIM) in the Architecture, Engineering and Construction (AEC) industry : a review and direction for future research

With an increasing level of collaboration amongst researchers, software developers and industry practitioners in the past three decades, building information modelling (BIM) is now recognized as an emerging technological and procedural shift within the architect, engineering and construction (AEC) industry. BIM is not only considered as a way to make a profound impact on the professions of AEC, but is also regarded as an approach to assist the industry to develop new ways of thinking and practice. Despite the widespread development and recognition of BIM, a succinct and systematic review of the existing BIM research and achievement is scarce. It is also necessary to take stock on existing applications and have a fresh look at where BIM should be heading and how it can benefit from the advances being made. This paper first presents a review of BIM research and achievement in AEC industry. A number of suggestions are then made for future research in BIM. This paper maintains that the value of BIM during design and construction phases is well documented over the last decade, and new research needs to expand the level of development and analysis from design/build stage to postconstruction and facility asset management. New research in BIM could also move beyond the traditional building type to managing the broader range of facilities and built assets and providing preventative maintenance schedules for sustainable and intelligent buildings