Influence of ageing on the properties of bitumen from asphalt mixtures with recycled concrete aggregates

The reuse of recycled concrete aggregates in new hot-mix asphalt can be a more sustainable method of production, but these mixtures may need a heat treatment before compaction to improve their water sensitivity performance. A direct consequence of this treatment is an increase in the hot-mix asphalt resilient modulus. The aim of this paper is to analyse the effect of ageing on the stiffness of asphalt mixtures with different amounts of recycled concrete aggregates, before and after a heat treatment, which was analysed through the assessment of its bitumen properties. Moreover, this paper also aims to analyse whether the rolling thin-film oven test is able to simulate the ageing effect of the heat treatment. In the laboratory work, a paving grade bitumen B50/70 has been used to produce asphalt mixtures with 0% and 30% recycled concrete aggregates, and the bitumen was later characterised (using penetration, softening point, dynamic viscosity and dynamic shear rheometer tests) in various situations, such as when using virgin bitumen, short-term aged bitumen, aged bitumen after heat treatment (simulated with 4 h of rolling thin-film oven test) and bitumen samples recovered from asphalt mixtures with different production mixes (0% and 30% recycled concrete aggregate) and heat treatment conditions (0 and 4 h of curing time in the oven). Based on the results obtained, it could be concluded that the ageing resulting from the heat treatment is the primary cause of the hot-mix asphalt's increased stiffness, while recycled concrete aggregate content has a small influence. Moreover, it could be concluded that when there is no curing time, the recycled concrete aggregate protects the bitumen against ageing. Additionally, it could be stated that the rolling thin-film test is able to adequately simulate the ageing effect of the heat treatment. Thus, this test is useful for determining the ageing suffered by the bitumen when the recycled concrete aggregate mixture is manufactured using a heat treatment.

Recycled asphalt mixtures with foamed bitumen: an alternative to build ecofriendly road pavements

Nowadays, recycling has become a very important objective for the society in the scope of a closed loop product life cycle. In recent years, new recycling techniques have been developed in the area of road pavements that allow the incorporation of high percentages of reclaimed asphalt (RA) materials in recycled asphalt mixtures. The use of foamed bitumen for production of recycled asphalt mixtures is one of those techniques, which also allows the reduction of the mixing temperatures (warm mix technology). However, it is important to evaluate if this solution can maintain or improve the performance of the resulting mixtures. Thus, the main aim of the present study is to assess the performance of warm recycled asphalt mixtures incorporating foamed bitumen as the new binder and 50% RA, in comparison with a control mixture using conventional bitumen. Four mixtures have been produced with 50% RA, one of them at typical high mixing temperatures with a conventional bitumen (control mixture) and the other three with foamed bitumen at different production temperatures. These four mixtures were tested to evaluate their compactability and water sensitivity. The laboratory test results showed that the production of recycled mixtures with foamed bitumen can be reduced by 40ºC without changing the performance of the resulting mixtures.

Evaluation of foamed bitumen efficiency in warm asphalt mixtures recycling

The recycling of pavements is nowadays a very important question to the road paving industry. With the objective of incorporating higher percentages of reclaimed asphalt (RA) materials in recycled asphalt mixtures, new techniques have been developed in the last years. The use of foamed bitumen is normally associated with the production of cold asphalt mixtures, which usually show lower quality standards. However, the objective of the work presented in this paper is to assess the use of foamed bitumen as the binder of warm asphalt mixtures incorporating 30% RA, which have quality standards similar to those of conventional mixtures. Thus, five mixtures have been produced with 30% RA, one of them with a conventional bitumen (control mix) and the others with foamed bitumen at different production temperatures. The mixtures were tested for compactability and water sensitivity and the results show a possible reduction of 25 ºC in the production temperatures, while the water sensitivity test results were kept close to 90 %.

Effect of incorporating different waste materials in bitumen

The increasing environmental concern about waste materials and the necessity of improving the performance of asphalt mixtures prompted the study of incorporating different waste materials in conventional bitumen. The reuse of waste materials can present benefits at an environmental and economic level, and some wastes can be used to improve the pavement performance. Thus, the purpose of this study is to evaluate the incorporation of different waste materials in bitumen, namely waste motor oil and different polymers. In order to accomplish this goal, 10% of waste motor oil and 5% of polymers (high density polyethylene, crumb rubber and styrene-butadiene-styrene) were added to a conventional bitumen and the resulting modified bitumens were characterized through basic and rheological tests. From this work, it can be concluded that the incorporation of different waste materials improve some important properties of the conventional bitumen. Such improvements might indicate a good behaviour at medium/high temperatures and an increase of fatigue and rutting resistance. Therefore, these modified bitumens with waste materials can contribute to a sustainable development of road paving industry due to their performance and environmental advantages.

Foamed Bitumen: an alternative way of producing asphalt mixtures

With the constant need to improve and make the production of asphalt mixtures more sustainable, new production techniques have been developed, the implementation of which implies the correct knowledge of their performance. One of the most promising asphalt production techniques is the use of foamed bitumen. However, it is essential to understand how this binder will behave when subject to the expansion process. The loss of volume of the foamed bitumen could be translated by a decay curve, which allows to determine the ideal temperature and water content added to the bitumen in order to assure adequate conditions to the mix the bitumen with the aggregates. On the present study, a conventional 160/220 pen grade bitumen was tested by using different temperatures and water contents, and it was concluded that the optimum temperature for the production of foamed bitumen (with the studied bitumen) is 150 ºC, which corresponds to a viscosity of 0.1 Pa.s. The water content mostly influence the half-life of the bitumen foam, resulting in quicker volume reductions for higher water contents.

Iowa Research with Chem-Crete Bitumen: Final Report Iowa Highway Research Board Project HR-226, June 1986

With the spiraling cost of construction, coupled with inflation, engineers must develop and research new techniques to better utilize the public's dollar. One area i n which these new technologies must be researched is in the field of highway construction; more specifically, asphalt products. There are areas within the state of Iowa which do not have Class I aggregate readily available for asphalt concrete road construction. The cost of transporting higher quality aggregate specified in the "Standard Specifications for Highway and Bridge construction"' for construction projects is escalating on a yearly basis. Many counties will be squeezed out of the construction of new roadways if an alternative to the high costs is not identified. The same high costs will curtail adequate upkeep on the existing paved system and will result in decreased serviceability. For this reason, a product is needed to better utilize the local aggregates for road construction and maintenance. There i s a product on the market which the promoters claim will improve the prer?nt asphalt to such a degree as to "upgrade deficient aggregates" to the level they can be used in today's standard construction techniques. This product is "Chem-Crete Bitumen," a'kpecially refined asphalt" that was promoted by Chem-Crete Corporation of Menlo Park, California. Chemkrete Technologies, Inc. of Wickliffe, Ohio; a wholly owned subsidiary of the Lubrizol Corporation has since purchased the U.S.

Implementing Microsoft .NET Framework for Bitumen-Extranet

Ohjelmistoprojektit pohjautuvat nykyään useasti osittain itsenäisesti suunniteltujen ja; toteutettujen ohjelmakomponenttien yhdistelemiseen. Tällä keinolla voidaan vähentää kehitystyön; viemää aikaa ja kustannuksia, jotta saadaan tuotettua kilpailukykyisempiä ohjelmistoja.; Tässädokumentissa käsitellään komponenttipohjaisen ohjelmistotuotannon näkökulmia ja; Microsoft .NET Framework ympäristöä, joka on kehitysympäristö komponenttipohjaisille; ohjelmistoille. Lisäksi esitellään tapauskohtainen ohjelmistoprojekti extranet-verkon; toteutukseen.

Highly concentrated bitumen emulsions. A state of the art, review of experimental results

Les emulsions concentrades o altament concentrades de betum són un camp molt poc estudiat avui en dia. El treball és un estat de l'art de tots els papers que hi ha sobre aquest tema desde el mètode tradicional fins el HIPR (High Internal Phase Ratio).

Derivative hedging strategies for bitumen price risk

The objective of the study is to extend the existing hedging literature of the commodity price risks by investigating what kind of hedging strategies can be used in companies using bitumen as raw material in their production. Five different alternative swap hedging strategies in bitumen markets are empirically tested. Strategies tested are full hedge strategy, simple, conservative, and aggressive term structure strategies, and implied volatility strategy. The effectiveness of the alternative strategies is measured by excess returns compared to no hedge strategy. In addition, the downside risk of each strategy is measured with target absolute semi-deviation. Results indicate that any of the tested strategies does not outperform the no hedge strategy in terms of excess returns in all maturities. The best-performing aggressive term structure strategy succeeds to create positive excess returns only in short maturities. However, risk seems to increase hand-in-hand with the excess returns so that the best-performing strategies get the highest risk metrics as well. This implicates that the company willing to gain from favorable price movements must be ready to bear a greater risk. Thus, no superior hedging strategy over the others is found.

Pilot Plant Studies On The Utilization Of Industrial Wastes For Industrial Bitumen Manufacture

The main objectives of the investigations reported in the present thesis are the following: (1) to find out some industrial wastes as cheaper additives to augment the air-blowing polymerization process of bitumen. This will bring down the cost of production of industrial bitumen which can be applied for the manufacture of bitumenous paints, roofing and flooring materials etc. (2) to find out suitable promoters for the above additives. This will bring down the consumption of the additives (3) to help in the industrial pollution control (4) to investigate the usefulness of the industrial bitumen produced in the production of bituminous paints (5) to find out thekinetic parameters of the reactions invovled with different additives. This is essential for the design, construction and operation of new industrial bitumen plants using the additives investigated. This will also enable us to establish the mechanism of the reactions involved in the process

Characterization of moisture susceptibility of asphaltic bitumen

La ricerca riguarda lo studio delle modifiche indotte dalla diffusione di acqua e umidità nelle pavimentazioni stradali con riferimento ai materiali bituminosi. Lo scopo è stato quello di analizzare le implicazioni che si sviluppano a livello chimico e reologico in vari bitumi. In questo progetto oltre alla fase sperimentale, è stato utilizzato un software per la simulazione agli elementi finiti. Per quanto concerne la fase di laboratorio, è stato sviluppato un nuovo protocollo di condizionamento. Tre diversi bitumi sono stati soggetti alla diffusione di acqua in forma liquida o vapore, a determinate condizioni ambientali e per svariati intervalli temporali. Grazie a l’utilizzo di due camere climatiche il condizionamento è stato realizzato in modo uniforme a precisi valori temperatura e umidità mantenuti stabili. I materiali analizzati: un bitume soft, uno hard, ed infine uno modificato con l’aggiunta di polimeri. Il dispositivo FTIR-ATR è stato utilizzato per la caratterizzazione chimica, mentre il comportamento reologico è stato analizzato tramite test eseguiti con il DSR. Le avanzate tecnologie presenti nel laboratorio della TU Delft hanno consentito di ottenere notevoli risultati. L’analisi è stata condotta con l’obiettivo di evidenziare i diversi cambiamenti indotti dalla diffusione di acqua liquida o vapore e per analizzare l’influenza della temperatura, del tipo del bitume e dell’incremento del tempo di condizionamento. Una analisi analoga è stata condotta parallelamente, con lo scopo di investigare la correlazione tra il processo di invecchiamento e la diffusione di umidità. Infine, la simulazione agli elementi finiti è stata sviluppata tramite il software CAPA-3D per analizzare il comportamento del bitume in periodi più estesi di diffusione di umidità. Inoltre, il comportamento dei bitumi è stato studiato anche in presenza di particelle di riempitivo. Particelle granitiche e calcaree sono state aggiunte ai bitumi in differenti percentuali.