947 resultados para Biotic control model.


Relevância:

100.00% 100.00%

Publicador:

Resumo:

A new optimal control model of the interactions between a growing tumour and the host immune system along with an immunotherapy treatment strategy is presented. The model is based on an ordinary differential equation model of interactions between the growing tu- mour and the natural killer, cytotoxic T lymphocyte and dendritic cells of the host immune system, extended through the addition of a control function representing the application of a dendritic cell treat- ment to the system. The numerical solution of this model, obtained from a multi species Runge–Kutta forward-backward sweep scheme, is described. We investigate the effects of varying the maximum al- lowed amount of dendritic cell vaccine administered to the system and find that control of the tumour cell population is best effected via a high initial vaccine level, followed by reduced treatment and finally cessation of treatment. We also found that increasing the strength of the dendritic cell vaccine causes an increase in the number of natural killer cells and lymphocytes, which in turn reduces the growth of the tumour.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper is concerned with the optimal flow control of an ATM switching element in a broadband-integrated services digital network. We model the switching element as a stochastic fluid flow system with a finite buffer, a constant output rate server, and a Gaussian process to characterize the input, which is a heterogeneous set of traffic sources. The fluid level should be maintained between two levels namely b1 and b2 with b1control on the ATM network is considered

Relevância:

100.00% 100.00%

Publicador:

Resumo:

An economic air pollution control model, which determines the least cost of reaching various air quality levels, is formulated. The model takes the form of a general, nonlinear, mathematical programming problem. Primary contaminant emission levels are the independent variables. The objective function is the cost of attaining various emission levels and is to be minimized subject to constraints that given air quality levels be attained.

The model is applied to a simplified statement of the photochemical smog problem in Los Angeles County in 1975 with emissions specified by a two-dimensional vector, total reactive hydrocarbon, (RHC), and nitrogen oxide, (NOx), emissions. Air quality, also two-dimensional, is measured by the expected number of days per year that nitrogen dioxide, (NO2), and mid-day ozone, (O3), exceed standards in Central Los Angeles.

The minimum cost of reaching various emission levels is found by a linear programming model. The base or "uncontrolled" emission levels are those that will exist in 1975 with the present new car control program and with the degree of stationary source control existing in 1971. Controls, basically "add-on devices", are considered here for used cars, aircraft, and existing stationary sources. It is found that with these added controls, Los Angeles County emission levels [(1300 tons/day RHC, 1000 tons /day NOx) in 1969] and [(670 tons/day RHC, 790 tons/day NOx) at the base 1975 level], can be reduced to 260 tons/day RHC (minimum RHC program) and 460 tons/day NOx (minimum NOx program).

"Phenomenological" or statistical air quality models provide the relationship between air quality and emissions. These models estimate the relationship by using atmospheric monitoring data taken at one (yearly) emission level and by using certain simple physical assumptions, (e. g., that emissions are reduced proportionately at all points in space and time). For NO2, (concentrations assumed proportional to NOx emissions), it is found that standard violations in Central Los Angeles, (55 in 1969), can be reduced to 25, 5, and 0 days per year by controlling emissions to 800, 550, and 300 tons /day, respectively. A probabilistic model reveals that RHC control is much more effective than NOx control in reducing Central Los Angeles ozone. The 150 days per year ozone violations in 1969 can be reduced to 75, 30, 10, and 0 days per year by abating RHC emissions to 700, 450, 300, and 150 tons/day, respectively, (at the 1969 NOx emission level).

The control cost-emission level and air quality-emission level relationships are combined in a graphical solution of the complete model to find the cost of various air quality levels. Best possible air quality levels with the controls considered here are 8 O3 and 10 NO2 violations per year (minimum ozone program) or 25 O3 and 3 NO2 violations per year (minimum NO2 program) with an annualized cost of $230,000,000 (above the estimated $150,000,000 per year for the new car control program for Los Angeles County motor vehicles in 1975).

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Huazhong Univ Sci & Technol, Natl Tech Univ Ukraine, Huazhong Normal Univ, Harbin Inst Technol, IEEE Ukraine Sect, I& M/CI Joint Chapter

Relevância:

100.00% 100.00%

Publicador:

Resumo:

With the increased use of "Virtual Machines" (VMs) as vehicles that isolate applications running on the same host, it is necessary to devise techniques that enable multiple VMs to share underlying resources both fairly and efficiently. To that end, one common approach is to deploy complex resource management techniques in the hosting infrastructure. Alternately, in this paper, we advocate the use of self-adaptation in the VMs themselves based on feedback about resource usage and availability. Consequently, we define a "Friendly" VM (FVM) to be a virtual machine that adjusts its demand for system resources, so that they are both efficiently and fairly allocated to competing FVMs. Such properties are ensured using one of many provably convergent control rules, such as AIMD. By adopting this distributed application-based approach to resource management, it is not necessary to make assumptions about the underlying resources nor about the requirements of FVMs competing for these resources. To demonstrate the elegance and simplicity of our approach, we present a prototype implementation of our FVM framework in User-Mode Linux (UML)-an implementation that consists of less than 500 lines of code changes to UML. We present an analytic, control-theoretic model of FVM adaptation, which establishes convergence and fairness properties. These properties are also backed up with experimental results using our prototype FVM implementation.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The general objective of this work was to develop a monitoring and management model for aquatic plants that could be used in reservoir cascades in Brazil, using the reservoirs of AES-Tiete as a study case. The investigations were carried out at the reservoirs of Barra-Bonita, Bariri, Ibitinga, Promissao, and Nova-Avanhandava, located in the Tiete River Basin; Agua Vermelha, located in the Grande River Basin; Caconde, Limoeiro, and Euclides da Cunha, which are part of the Pardo River Basin; and the Mogi-Guacu reservoir, which belongs to the Mogi-Guacu River basin. The main products of this work were: development of techniques using satellite-generated images for monitoring and planning aquatic plant control; planning and construction of a boat to move floating plant masses and an airboat equipped with a DGPS navigation and application flow control system. Results allowed to conclude that the occurrence of all types of aquatic plants is directly associated with sedimentation process and, consequently, with nutrient and light availability. Reservoirs placed at the beginning of cascades are more subject to sedimentation and occurrence of marginal, floating and emerged plants, and are the priority when it comes to controlling these plants, since they provide a supply of weeds for the other reservoirs. Reservoirs placed downstream show smaller amounts of water-suspended solids, with greater transmission of light and occurrence of submerged plants.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Flash floods are of major relevance in natural disaster management in the Mediterranean region. In many cases, the damaging effects of flash floods can be mitigated by adequate management of flood control reservoirs. This requires the development of suitable models for optimal operation of reservoirs. A probabilistic methodology for calibrating the parameters of a reservoir flood control model (RFCM) that takes into account the stochastic variability of flood events is presented. This study addresses the crucial problem of operating reservoirs during flood events, considering downstream river damages and dam failure risk as conflicting operation criteria. These two criteria are aggregated into a single objective of total expected damages from both the maximum released flows and stored volumes (overall risk index). For each selected parameter set the RFCM is run under a wide range of hydrologic loads (determined through Monte Carlo simulation). The optimal parameter set is obtained through the overall risk index (balanced solution) and then compared with other solutions of the Pareto front. The proposed methodology is implemented at three different reservoirs in the southeast of Spain. The results obtained show that the balanced solution offers a good compromise between the two main objectives of reservoir flood control management

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Postprint

Relevância:

100.00% 100.00%

Publicador:

Resumo:

"Georgia Institute of Technology."

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Os girinos são organismos diversos e abundantes nos pequenos riachos de cabeceira de florestas tropicais e constituem importantes componentes da diversidade biológica, da trófica e funcional dos sistemas aquáticos. Diferentes características estruturais e limnológicas dos ambientes aquáticos influenciam a organização das assembleias de girinos. Embora o estágio larvar dos anuros seja o mais vulnerável de seu ciclo de vida, sujeito a elevadas taxas de mortalidade, as pesquisas sobre girinos na região neotropical ainda são pouco representativas diante da elevada diversidade de anfíbios desta região e ferramentas que permitam a sua identificação ainda são escassas. Nesta tese, dividida em três capítulos, apresento uma compilação das informações relacionadas aos principais fatores que afetam as assembleias de girinos na região tropical (Capítulo 1), a caracterização morfológica dos girinos encontrados nos riachos durante o estudo e uma proposta de chave dicotômica de identificação (Capítulo 2) e avalio a importância relativa da posição geográfica e da variação temporal de fatores ambientais locais sobre as assembleias de girinos, assim como a correlação entre as espécies de girinos e as variáveis ambientais de 10 riachos, ao longo de 15 meses, nas florestas da REGUA (Capítulo 3). Há pelo menos oito tendências relacionadas à distribuição das assembleias de girinos: (1) o tamanho dos riachos e a diversidade de microhabitats são importantes características abióticas influenciando a riqueza e a composição de espécies; (2) em poças, o gradiente de permanência (e.g., hidroperíodo) e a heterogeneidade do habitat são os principais fatores moldando as assembleias de girinos; (3) a composição de espécies parece ser um parâmetro das assembleias mais relevante do que a riqueza de espécies e deve ser primeiramente considerado durante o planejamento de ações conservacionistas de anuros associados a poças e riachos; (4) a predação parece ser a interação biótica mais importante na estruturação das assembleias de girinos, com predadores vertebrados (e.g. peixes) sendo mais vorazes em habitats permanentes e predadores invertebrados (e.g. larvas de odonata) sendo mais vorazes em ambientes temporários; (5) os girinos podem exercer um efeito regulatório, predando ovos e girinos recém eclodidos; (6) o uso do microhabitat varia em função da escolha do habitat reprodutivo pelos adultos, presença de predadores, filogenia, estágio de desenvolvimento e heterogeneidade do habitat; (7) os fatores históricos restringem os habitats reprodutivos que uma espécie utiliza, impondo restrições comportamentais e fisiológicas; (8) a variação temporal nos fatores bióticos (e.g., fatores de risco), abióticos (e.g., distribuição de chuvas), e no padrão de reprodução das espécies pode interferir na estrutura das assembleias de girinos tropicais. A variação temporal na heterogeneidade ambiental dos riachos da REGUA resultou na previsibilidade das assembleias locais de girinos, sendo que os parâmetros ambientais explicaram 23% da variação na sua composição. Os parâmetros espaciais explicaram uma porção menor da variação nas assembleias (16%), enquanto uma porção relativamente elevada da variação temporal da heterogeneidade ambiental foi espacialmente estruturada (18%). As variáveis abióticas que apresentaram as maiores correlação com a composição das assembleias de girinos foram a proporção de folhiço e de rochas no fundo do riacho, e secundariamente a profundidade, a condutividade e a temperatura. O gradiente gerado pela proporção de folhiço e de rochas representou a transição entre riachos permanentes e intermitentes. Este gradiente proporcionou o turnover de espécies, o qual também seguiu um gradiente de condutividade, temperatura, profundidade, e em menor extensão, de hidroperíodo e largura, que estiveram fortemente associado ao grau de permanência dos riachos. Estes resultados corroboram tanto a hipótese do controle ambiental, como do controle biótico de comunidades e indicam que a variação temporal da heterogeneidade ambiental e a variação na posição geográfica são importantes para a estruturação local de assembleias de girinos da REGUA. Os resultados também permitiram distinguir entre assembleias de girinos exclusivas de riachos permanentes, exclusivas de riachos intermitentes e aquelas registradas nos dois tipos de riachos. Os resultados deste capítulo são relevantes para compreender em que extensão os efeitos da variação temporal na heterogeneidade ambiental e de processos espaciais afetam localmente a estruturação de assembleias de girinos.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Recent developments in vehicle steering systems offer new opportunities to measure the steering torque and reliably estimate the vehicle sideslip and the tire-road friction coefficient. This paper presents an approach to vehicle stabilization that leverages these estimates to define state boundaries that exclude unstable vehicle dynamics and utilizes a model predictive envelope controller to bound the vehicle motion within this stable region of the state space. This approach provides a large operating region accessible by the driver and smooth interventions at the stability boundaries. Experimental results obtained with a steer-by-wire vehicle and a proof of envelope invariance demonstrate the efficacy of the envelope controller in controlling the vehicle at the limits of handling.