Application of modelling for predicting the behaviour of polymers and adhesives in microelectronic and photonic devices

With the growth in computing power, and advances in numerical methods for the solution of partial differential equations, modeling technologies based around computational fluid dynamics, finite element analysis and optimisation are now being widely used by researchers and industry. Polymer and adhesive materials are now being widely used in electronic and photonic devices. This paper will illustrate the use of modeling tools to predict the behaviour of these materials from product assembly to its performance and reliability.

Sustainable inorganic Binders and Their Applications in Building Engineering: A Green Alternative to Ordinary Portland Cement

In the last decades, the building materials and construction industry has been contributing to a great extent to generate a high impact on our environment. As it has been considered one of the key areas in which to operate to significantly reduce our footprint on environment, there has been widespread belief that particular attention now has to be paid and specific measures have to be taken to limit the use of non-renewable resources.The aim of this thesis is therefore to study and evaluate sustainable alternatives to commonly used building materials, mainly based on ordinary Portland Cement, and find a supportable path to reduce CO2 emissions and promote the re-use of waste materials. More specifically, this research explores different solutions for replacing cementitious binders in distinct application fields, particularly where special and more restricting requirements are needed, such as restoration and conservation of architectural heritage. Emphasis was thus placed on aspects and implications more closely related to the concept of non-invasivity and environmental sustainability. A first part of the research was addressed to the study and development of sustainable inorganic matrices, based on lime putty, for the pre-impregnation and on-site binding of continuous carbon fiber fabrics for structural rehabilitation and heritage restoration. Moreover, with the aim to further limit the exploitation of non-renewable resources, the synthesis of chemically activated silico-aluminate materials, as metakaolin, ladle slag or fly ash, was thus successfully achieved. New sustainable binders were hence proposed as novel building materials, suitable to be used as primary component for construction and repair mortars, as bulk materials in high-temperature applications or as matrices for high-toughness fiber reinforced composites.

Interactions of G-quadruplex binders and Topoisomerase I inhibitors in cancer cells

Top1-DNA cleavage complexes (Top1ccs) trigger an accumulation of antisense RNAPII transcripts specifically at active divergent CpG-island promoters in a replication independent and Top1 dependent manner, leading to transcription-dependent genome instability and altered transcription regulation. Using different cancer cell lines of colon and osteo origins, we show that they display different sensitivity to CPT and G4 binder that is independent from Top1 level. To look at the interactions between Top1 and G4, we show that co-treatment with G4 binders potentiate the cell cytotoxicity of CPT regardless of the treatment sequences. Potentiation is indicated by a reduced inhibition concentration (IC50) with a more profound cytotoxicity in CPT-resistant cell lines, HCT15 and U2OS, hence, indicating an interaction between Top1inhibitor and G4 binders. Moreover, computational analysis confirmed the present of G4 motifs in genes with CPT-induced antisense transcription. G4 motifs are present mostly 5000 bp upstream from transcription start site and notably lower in genes. Comparisons between genes with no antisense transcription and genes with antisense transcription show that G4 motifs in this region are notably lower in the genes with antisense transcripts. Since CPT increases negative supercoils at promoters of intermediate activity, the formation of G4 is also increased in CPT-treated cells. Suprisingly, formation of G4 is regulated in parallel to the transient stabilization of R-loops, indicating a role in response to CPT-induced stress. G4 formation is highly elevated in Pyridostatin treated cells, which previous study shows increased formation of γH2Ax foci. This effect is also seen in the CPT-resistant cell lines, HCT15, indicating that the formation is a general event in response to CPT. We also show that R-loop formation is greatly increased in Pyridostatin treated cells. In order to study the role of R-loops and G4 structures in Top1cc-dependant repair pathway, we inhibited tyrosyl-phosphodiestrase 1 (TDP-1) using a TDP-1 inhibitor.

Directory : information sources on scientific research related to the preservation of books, paper, and adhesives.

Mode of access: Internet.

Abstracts from the wills and testamentary documents of printers, binders, and stationers of Cambridge, from 1504 to 1699 /

Mode of access: Internet.

Avaliacao preliminar da utilizacao do residuo industrial de man dioca (manihot esculenta granz) como excipiente em comprimidos: Caracteristicas fisicas e de compressao

The applicability of a residue of manioc (Manihot esculenta Granz) from industrial processing as a direct compression excipient was investigated in comparison with microcrystalline cellulose (Avicel® PH 101). Physical characteristics of the powders like bulk and tap densities, particle size, flow properties (flow rate, index of compressibility and angle of repose) and agglutination were evaluated. The residue had poor performance as excipient for direct compression. However, it showed better disintegration properties than Avicel. The possibility of its use as disintegrant agent will be confirmed on future studies.

Relating monolithic and granular leaching from contaminated soil treated with different cementitious binders.

This work employed a clayey, silty, sandy gravel contaminated with a mixture of metals (Cd, Cu, Pb, Ni and Zn) and diesel. The contaminated soil was treated with 5 and 10% dosages of different cementitious binders. The binders include Portland cement, cement-fly ash, cement-slag and lime-slag mixtures. Monolithic leaching from the treated soils was evaluated over a 64-day period alongside granular leachability of 49- and 84-day old samples. Surface wash-off was the predominant leaching mechanism for monolithic samples. In this condition, with data from different binders and curing ages combined, granular leachability as a function of monolithic leaching generally followed degrees 4 and 6 polynomial functions. The only exception was for Cu, which followed the multistage dose-response model. The relationship between both leaching tests varied with the type of metal, curing age/residence time of monolithic samples in the leachant, and binder formulation. The results provide useful design information on the relationship between leachability of metals from monolithic forms of S/S treated soils and the ultimate leachability in the eventual breakdown of the stabilized/solidified soil.

Etch and rinse versus self-etching adhesives systems: Tridimensional micromechanical analysis of dentin/adhesive interface

The purpose of this study was to evaluate stress distribution in the hybrid layer produced by two adhesive systems using three-dimensional finite element analysis (FEA). Four FEA models (M) were developed: Mc, a representation of a dentin specimen (41 x 41 x 82 mu m) restored with composite resin, exhibiting the adhesive layer, hybrid layer (HL), resin tags, peritubular dentin, and intertubular dentin to simulate the etch-and-rinse adhesive system; Mr, similar to Mc, with lateral branches of the adhesive; Ma, similar to Mc, however without resin tags and obliterated tubule orifice, to simulate the environment for the self-etching adhesive system; Mat, similar to Ma, with tags. A numerical simulation was performed to obtain the maximum principal stress (sigma(max)). The highest sigma(max) in the HL was observed for the etch-and-rinse adhesive system. The lateral branches increased the sigma(max) in the HL. The resin tags had a little influence on stress distribution with the self-etching system. (C) 2012 Elsevier Ltd. All rights reserved.