Bases para un diseño metodológico de estimulación binaural como terapia acústica en neurología

La medicina y la ingeniería del siglo XXI han dado como fruto numerosos avances para la sociedad aunque en la mayoría de los casos los tratamientos suelen ser costosos e invasivos. La educación que recibe la sociedad sobre la salud es escasa, ya que sólo vamos al médico cuando realmente estamos enfermos. Este trabajo presenta nuestra apuesta por las terapias complementarias, para el desarrollo de una metodología terapéutica no invasiva y con un costo muy bajo. La finalidad de esta Tesis, que se enmarca en un equipo multidisciplinar, fruto de la estrecha colaboración en el que participan psicopedagogos, ingenieros y médicos, es perfilar una metodología que luego pueda ser aplicable a patologías neurológicas. Aquí, dejamos sentadas las bases. Faltarán nuevos investigadores que continúen este camino para tener una base de datos lo suficientemente extensa de registros de sujetos que hayan sido sometidos a terapia binaural, para poder sacar unas conclusiones sólidas. La aportación de esta Tesis deja cubierta la aplicación, selección, procesado de señal y desarrollo de algoritmos, test cognitivos indicados para el caso específico que nos ocupa, cálculo de incertidumbre del sistema utilizado para la aplicación del estímulo y desarrollo de un test psicoacústico específico. EL empleo del sonido en medicina como es la musicoterapia o sonoterapia ha experimentado una gran difusión en los últimos años, más de 100.000 nuevas citas bibliográficas han aparecido con respecto al año anterior. Sin embargo, son escasísimas las que hacen referencia a las características físico acústicas del sonido empleado, tan sólo hemos encontrado una par de ellas que correlacionan las características físicas del sonido con el tipo de respuesta terapéutica. No encontramos citas bibliográficas específicas que planteen un modelo experimental científico capaz de reproducir las mismas respuestas ante los mismos parámetros y estímulos. En esta Tesis proponemos el uso de estimulación sonora binaural, que consiste en la utilización de dos tonos puros idénticos pero ligeramente diferentes en frecuencia que se presentan de manera separada cada uno en un oído, como consecuencia, la persona que recibe la estimulación percibe un tercer tono, llamado tono binaural, formado por la diferencia de frecuencia de ambos variando su amplitud. Existen estudios que sugieren que dichas frecuencias binaurales pueden modificar los patrones eléctricos de la actividad cerebral y los niveles de arousal, conociéndose en la literatura bajo el nombre de “entrainment”. Tras la revisión bibliográfica del estado del arte, podemos concluir que es necesario el desarrollo de estudios doble ciego bien diseñados, con el objetivo de establecer una base sólida sobre los efectos de este tipo de estimulación, ya que la mayoría de los beneficios documentados se refieren a muestras muy pequeñas y con poco rigor científico, siendo los resultados positivos obtenidos debidos al efecto placebo. La tecnología binaural es barata siendo cualquier avance en esta dirección de interés público. El objetivo concreto de la investigación es estudiar el potencial de las ondas binaurales en un área en particular: tareas que requieren atención y concentración. Se busca obtener cualquier cambio en las ondas cerebrales que se puedan correlar con la mejoras. A la vista de los resultados de estas investigaciones se intentará aplicar esta metodología en neuropatologías que presenten alguna deficiencia en el área de atención como es el Trastorno de espectro Autista. En esta Tesis presentamos los resultados de dos estudios independientes, el primero para sentar las bases del método (tiempos, diseño de estimulaciones, procesado) en una muestra de 78 adultos sanos, el segundo a partir de los resultados obtenidos en el primero, afinando la metodología y para un grupo de 20 niños entre 8 y 12 años, los resultados del segundo estudio sirven para justificar su aplicación en niños con TEA que presenten déficit de atención. ABSTRACT Medicine and engineering in the 21st century have resulted in advances for society but in most cases the treatments are often costly and invasive. The health education society receive is scarce, since only go to the doctor when we are really sick. With this work I present my commitment to complementary therapies, my little grain of sand in the development of a noninvasive therapeutic approach and very low cost, well and can be used in a preventive manner resulting in a society with less sick. The purpose of this thesis is to outline a methodology that can then be applied to neurological diseases, here we lay the groundwork. New researchers are needed to continue this path for a sufficiently extensive records database of subjects who have undergone binaural therapy, and so to draw firm conclusions. The contribution of this thesis includes: the application, selection, signal processing and algorithm development, indicated cognitive tests for the specific case at hand, calculation of system uncertainty of the system and development of a specific psychoacoustic test. The use of sound in medicine, such as music therapy or sound therapy has experienced a great diffusion in recent years, more than 100,000 new citations have appeared over the previous year but very few are those referring to acoustic physical characteristics of sound employee, we have only found a couple of them that physical sound characteristics are correlated with the therapeutic response. We found no specific citations posing a scientific experimental model capable of reproducing the same answers to the same parameters and stimuli. In this thesis we propose the use of binaural sound stimulation which involves the use of two identical but slightly different in frequency pure tones presented separately each in one ear, as a result the subject perceives a third tone, called binaural tone, formed by the difference in frequency with amplitude variations Studies suggest that these binaural frequencies can modify the electrical patterns of brain activity and arousal levels, being known in the literature under the name of “entrainment”. After the literature review of the state of the art, we conclude, it is necessary to develop well-designed double-blind studies, in order to establish a solid foundation on the effects of such stimulation, since most of the documented benefits relate to very small samples and unscientific may be obtained positive results due to the placebo effect. The binaural technology is cheap being any progress in this direction in the public interest. The specific objective of the research is to study the potential of binaural waves in a particular area: tasks requiring attention and concentration also we want to get any change in brain waves that can correlate with improvements. In view of the results of this research we seek to apply this methodology in neuropathology presenting any deficiency in the area of attention such as Autism Spectrum Disorder. In this thesis we present the results of two independent studies, the first to lay the foundation of the method (times, stimulation design, processing) in a sample of 78 healthy adults, the second from the results obtained in the first, refine the methodology for a group of 20 children between 8 and 12 years, the results of the second study used to justify its use in children with ASD that present attention deficit.

3-D Audio in Mobile Communication Devices: Methods for Mobile Head-Tracking

Future generations of mobile communication devices will serve more and more as multimedia platforms capable of reproducing high quality audio. In order to achieve a 3-D sound perception the reproduction quality of audio via headphones can be significantly increased by applying binaural technology. To be independent of individual head-related transfer functions (HRTFs) and to guarantee a good performance for all listeners, an adaptation of the synthesized sound field to the listener's head movements is required. In this article several methods of head-tracking for mobile communication devices are presented and compared. A system for testing the identified methods is set up and experiments are performed to evaluate the prosand cons of each method. The implementation of such a device in a 3-D audio system is described and applications making use of such a system are identified and discussed.

Spatial audition in a static virtual environment : the role of auditory-visual interaction

The integration of the auditory modality in virtual reality environments is known to promote the sensations of immersion and presence. However it is also known from psychophysics studies that auditory-visual interaction obey to complex rules and that multisensory conflicts may disrupt the adhesion of the participant to the presented virtual scene. It is thus important to measure the accuracy of the auditory spatial cues reproduced by the auditory display and their consistency with the spatial visual cues. This study evaluates auditory localization performances under various unimodal and auditory-visual bimodal conditions in a virtual reality (VR) setup using a stereoscopic display and binaural reproduction over headphones in static conditions. The auditory localization performances observed in the present study are in line with those reported in real conditions, suggesting that VR gives rise to consistent auditory and visual spatial cues. These results validate the use of VR for future psychophysics experiments with auditory and visual stimuli. They also emphasize the importance of a spatially accurate auditory and visual rendering for VR setups.

Effects of binaural stimulation in attention and EEG

When two pure tones of slightly different frequency are presented separately to each ear, the listener perceives a third single tone with amplitude variations at a frequency that equals the difference between the two tones, this perceptual illusion is known as binaural auditory beat. There are anecdotal reports that suggest that the binaural beat can entrain EEG activity and may affect the arousal levels, although few studies have been published. There is a need for double-blind, well-designed studies in order to establish a solid foundation for these sounds, as most of the documented benefits come from self-reported cases that could be affected by placebo effect. As BB’s are a cheap technology (it even exists a free open source programmable bin aural-beat generator on the internet named Gnaural), any achievement in this area could be of public interest. The aim in our research was to explore the potential of BB’s in a particular field: tasks that require focus and concentration. In order to detect changes in the brain waves that could relate to any particular improvement, EEG recordings of a small sample of individuals were also obtained. In this study we compare the effect of different binaural stimulation in 7 EEG frequency ranges, 78 participants were exposed to 20 min binaural beat stimulation. The effects were obtained both qualitative with cognitive test and quantitative with EEG analysis. Results suggest no significant statistical improvement in 20 min stimulation.

Effect of binaural stimulation on attention and EEG

When two pure tones of slightly different frequency are presented separately to each ear, the listener perceives a third single tone with amplitude variations at a frequency that equals the difference between the two tones; this perceptual illusion is known as the binaural auditory beat (BB). There are anecdotal reports that suggest that the binaural beat can entrain EEG activity and may affect the arousal levels, although few studies have been published. There is a need for double-blind, well-designed studies in order to establish a solid foundation for these sounds, as most of the documented benefits come from self-reported cases that could be affected by placebo effect. As BBs are a cheap technology (it even exists a free open source programmable binaural- beat generator on the Internet named Gnaural), any achievement in this area could be of public interest. The aim in our research was to explore the potential of BBs in a particular field: tasks that require focus and concentration. In order to detect changes in the brain waves that could relate to any particular improvement, EEG recordings of a small sample of individuals were also obtained. In this study we compare the effect of different binaural stimulation in 7 EEG frequency ranges. 78 participants were exposed to 20-min binaural beat stimulation. The effects were obtained both quali- tative with cognitive test and quantitative with EEG analysis. Results suggest no significant statistical improvement in 20-min stimulation.

Roadmapping for technology push and partnership: A contribution for open innovation environments

There are several tools in the literature that support innovation in organizations. Some of the most cited are the so-called technology roadmapping methods, also known as TRM. However, these methods are designed primarily for organizations that adopt the market pull strategy of technology-product integration. Organizations that adopt the technology push integration strategy are neglected in the literature. Furthermore, with the advent of open innovation, it is possible to note the need to consider the adoption of partnerships in the innovation process. Thus, this study proposes a method of technology roadmapping, identified as method for technology push (MTP), applicable to organizations that adopt the technology push integration strategy, such as SMEs and independent research centers in an open-innovation environment. The method was developed through action-research and was assessed from two analytical standpoints: externally, via a specific literature review on its theoretical contributions, and internally, through the analysis of potential users` perceptions on the feasibility of applying MTP. The results indicate both the unique character of the method and its perceived implementation feasibility. Future research is suggested in order to validate the method in different types of organizations (C) 2011 Elsevier Ltd. All rights reserved.

Integrating technology roadmapping and portfolio management at the front-end of new product development

Many authors point out that the front-end of new product development (NPD) is a critical success factor in the NPD process and that numerous companies face difficulties in carrying it out appropriately. Therefore, it is important to develop new theories and proposals that support the effective implementation of this earliest phase of NPD. This paper presents a new method to support the development of front-end activities based on integrating technology roadmapping (TRM) and project portfolio management (PPM). This new method, called the ITP Method, was implemented at a small Brazilian high-tech company in the nanotechnology industry to explore the integration proposal. The case study demonstrated that the ITP Method provides a systematic procedure for the fuzzy front-end and integrates innovation perspectives into a single roadmap, which allows for a better alignment of business efforts and communication of product innovation goals. Furthermore, the results indicated that the method may also improve quality, functional integration and strategy alignment. (C) 2010 Elsevier Inc. All rights reserved.

A QUALITY MANAGEMENT SYSTEM FOR POSITIONING WITH GNSS TECHNOLOGY

This paper presents a proposal for a Quality Management System for a generic GNSS Surveying Company as an alternative for management and service quality improvements. As a result of the increased demand for GNSS measurements, a large number of new or restructured companies were established to operate in that market. Considering that GNSS surveying is a new process, some changes must be performed in order to accommodate the old surveying techniques and the old fashioned management to the new reality. This requires a new management model that must be based on a well-described procedure sequence aiming at the Total Management Quality for the company. The proposed Quality Management System was based on the requirements of the Quality System ISO 9000:2000, applied to the whole company, focusing on the productive process of GNSS surveying work.

Implementation of a Control Loop Experiment in a Network-Based Control System With LonWorks Technology and IP Networks

Considering the increasing popularity of network-based control systems and the huge adoption of IP networks (such as the Internet), this paper studies the influence of network quality of service (QoS) parameters over quality of control parameters. An example of a control loop is implemented using two LonWorks networks (CEA-709.1) interconnected by an emulated IP network, in which important QoS parameters such as delay and delay jitter can be completely controlled. Mathematical definitions are provided according to the literature, and the results of the network-based control loop experiment are presented and discussed.

Technology assessment for power quality mitigation devices - Micro-DVR case study

This work presents a case study on technology assessment for power quality improvement devices. A system compatibility test protocol for power quality mitigation devices was developed in order to evaluate the functionality of three-phase voltage restoration devices. In order to validate this test protocol, the micro-DVR, a reduced power development platform for DVR (dynamic voltage restorer) devices, was tested and the results are discussed based on voltage disturbances standards. (C) 2011 Elsevier B.V. All rights reserved.

DEVELOPMENT OF A MICRO-HEAT EXCHANGER WITH STACKED PLATES USING LTCC TECHNOLOGY

A green ceramic tape micro-heat exchanger was developed using Low Temperature Co-fired Ceramics technology (LTCC). The device was designed by using Computational Aided Design software and simulations were made using a Computational Fluid Dynamics package (COMSOL Multiphysics) to evaluate the homogeneity of fluid distribution in the microchannels. Four geometries were proposed and simulated in two and three dimensions to show that geometric details directly affect the distribution of velocity in the micro-heat exchanger channels. The simulation results were quite useful for the design of the microfluidic device. The micro-heat exchanger was then constructed using the LTCC technology and is composed of five thermal exchange plates in cross-flow arrangement and two connecting plates, with all plates stacked to form a device with external dimensions of 26 x 26 x 6 mm(3).

An estimate of biometric parameters in eucalyptus clone plantations in Southern Bahia: an application of the airborne laser scanning (ALS) technology

The application of airborne laser scanning (ALS) technologies in forest inventories has shown great potential to improve the efficiency of forest planning activities. Precise estimates, fast assessment and relatively low complexity can explain the good results in terms of efficiency. The evolution of GPS and inertial measurement technologies, as well as the observed lower assessment costs when these technologies are applied to large scale studies, can explain the increasing dissemination of ALS technologies. The observed good quality of results can be expressed by estimates of volumes and basal area with estimated error below the level of 8.4%, depending on the size of sampled area, the quantity of laser pulses per square meter and the number of control plots. This paper analyzes the potential of an ALS assessment to produce certain forest inventory statistics in plantations of cloned Eucalyptus spp with precision equal of superior to conventional methods. The statistics of interest in this case were: volume, basal area, mean height and dominant trees mean height. The ALS flight for data assessment covered two strips of approximately 2 by 20 Km, in which clouds of points were sampled in circular plots with a radius of 13 m. Plots were sampled in different parts of the strips to cover different stand ages. The clouds of points generated by the ALS assessment: overall height mean, standard error, five percentiles (height under which we can find 10%, 30%, 50%,70% and 90% of the ALS points above ground level in the cloud), and density of points above ground level in each percentile were calculated. The ALS statistics were used in regression models to estimate mean diameter, mean height, mean height of dominant trees, basal area and volume. Conventional forest inventory sample plots provided real data. For volume, an exploratory assessment involving different combinations of ALS statistics allowed for the definition of the most promising relationships and fitting tests based on well known forest biometric models. The models based on ALS statistics that produced the best results involved: the 30% percentile to estimate mean diameter (R(2)=0,88 and MQE%=0,0004); the 10% and 90% percentiles to estimate mean height (R(2)=0,94 and MQE%=0,0003); the 90% percentile to estimate dominant height (R(2)=0,96 and MQE%=0,0003); the 10% percentile and mean height of ALS points to estimate basal area (R(2)=0,92 and MQE%=0,0016); and, to estimate volume, age and the 30% and 90% percentiles (R(2)=0,95 MQE%=0,002). Among the tested forest biometric models, the best fits were provided by the modified Schumacher using age and the 90% percentile, modified Clutter using age, mean height of ALS points and the 70% percentile, and modified Buckman using age, mean height of ALS points and the 10% percentile.