Identificação de genes cry de Bacillus thuringiensis no controle de Sphenophorus levis, o bicudo da cana-de-açúcar

A bactéria B. thuringiensis caracteriza-se pela produção de proteínas tóxicas a representantes de diversas ordens de insetos, as quais são codificadas por genes cry. Este trabalho foi realizado com objetivo de selecionar isolados de B. thuringiensis, por meio da caracterização morfológica e molecular, identificando as diferentes subclasses dos genes cry3 e cry35 e determinar a patogenicidade contra Sphenophorus levis, uma das mais importantes pragas da cultura da cana-de-açúcar. Foram utilizados 1163 isolados de B. thuringiensis e com a observação em microscópio com contraste de fases foram confirmadas como pertencentes à espécie de B. thuringiensis. O material genético foi purificado pela matriz de troca iônica Instagene Matrix e submetido a PCR com iniciadores gerais cry3 e cry35 identificando-se 30 isolados contendo genes com potencial para o controle de coleópteros, os quais juntamente com as linhagens-padrão de B. thuringiensis var. tenebrionis, B. thuringiensis var. morrissone e B. thuringiensis var. tolworthi foram utilizados para a realização do bioensaio. Através de análise discriminante alocaram-se os isolados em quatro grupos quanto à toxicidade de B. thuringiensis. Os grupos ficaram assim definidos: um grupo que promovem até 10% de mortalidade contendo as testemunhas e duas linhagens;um grupo que causou 39% de mortalidade contendo três linhagens padrão e dez isolados; um grupo com 52% de mortalidade contendo treze isolados e um grupo com 70% de mortalidade contendo cinco isolados, os quais devem ser considerados promissores no controle biológico de S. levis.

Avaliação de nematóides entomopatogênicos contra o bicudo da cana-de-açúcar Sphenophorus levis Vaurie, 1978, e efeito da associação desses agentes com inseticidas químicos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Novo gene cry8 de Bacillus thuringiensis: caracterização e avaliação da patogenicidade ao bicudo da cana-de-açúcar, Sphenophorus levis Vaurie, 1978 (Coleoptera: Curculionidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Eficiência de nematoides entomopatogênicos e inseticidas químicos contra Sphenophorus levis e Leucothyreus sp. em cana-de-açúcar

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito de inseticidas na qualidade da cana-de-açúcar e microbiota da fermentação etanólica sob infestação de Sphenophorus levis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Identificação e caracterização de um gene cry recombinante de Bacillus thuringiensis var. londrina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Controle de Sphenophorus levis e Conotrachelus humeropictus pelo uso combinado de nematoides e fungos entomopatogênicos

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Sphenophorus levis Vaurie, 1978 (Coleoptera: Curculionidae): caracterização macroscópica e determinação de inseticida e época de aplicação para controle

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Resistência à compressão e remoção de folhas da cana-de-açúcar visando à colheita mecânica

Sugarcane holds an important place in the Brazilian economy. Grate part of the sugarcane harvested still accomplished largely manually. Sugarcane harvesters available in Brazil use the technology to chop the cane into 200 to 300 mm billets to allow on the go cane transferring to transport, contradicting the traditional method of whole stalk sugarcane harvesting system. In order to make whole stalk mechanical harvesting system possible, one of the barriers to be expired is the mechanical removal of the straw. The design of a mechanism that accomplishes this operation depends directly on the knowledge of the mechanical properties of the sugarcane related to its resistance to compression and the forces necessary to remove the leaves from the stalk. Compression tests were conducted using the universal testing machine. For leaves removal test by friction, a special apparatus was designed to allow the registration of the normal and traction force. The sugarcane stalk can resist up to 4.9 MPa. With a normal pressure of 0.8 MPa, which correspond to a friction force of 315 N, it is possible to remove the leaves, independent of its location in the sugarcane stalk.

Características físicas e mecânicas de misturas de solo, cimento e cinzas de bagaço de cana-de-açúcar

This work was done with the objective of studying some physical and mechanical characteristics of the sugarcane bagasse ash added to a soil-cement mixture, in order to obtain an alternative construction material. The sugarcane bagasse ash pre-treatment included both sieving and grinding, before mixing with soil and cement. Different proportions of cement-ash were tested by determining its standard consistence and its compressive resistance at 7 and 28 days age. The various treatments were subsequently applied to the specimens molded with different soil-cement-ash mixtures which in turns were submitted to compaction, unconfined compression and water absorption laboratory tests. The results showed that it is possible to replace up to 20% of Portland cement by sugarcane bagasse ash without any damage to the mixture's compressive strength.

Sistema de monitoramento de perdas visíveis de cana-de-açúcar em colhedora de cana picada

In the last few years the sugar-cane mechanical harvested area has increased, especially in regions with appropriated slop. The use of this technology brings some inconveniences, such as, the increase in the percentage of extraneous matter, which causes the reduction of technological quality of the raw material, and losses in the field. Extraneous matter (trash) is composed of tops and leaves in major percentage, plus soil and roots, and eventually some metal parts. In the green cane harvest system the percentage of extraneous matter has a tendency to increase due to the great amount of vegetal matter to be processed. The increase in the blower fan speed to reduce the amount of extraneous matter can lead to an unacceptable economic level of raw material losses. The main objective of this work was, using a cane loss monitor, to evaluate and quantify the amount of visible losses of sugar cane through the primary extractor at two different fan speeds. Afterwards these losses were related to the harvester cleaning efficiency. The piezoelectric transducer shows a reasonable sensibility. The results show that the cleaning efficiency in the primary extractor (85% mean), the cane losses (between 5.68% and 2.15%) and fan speed are interrelated. The total losses and specially splinters (between 3.19% and 0.91%), showed a significant difference among the treatments.

Projeto de um cortador de base para colhedora de cana-de-açúcar utilizando otimização matemática

A base-cutter represented for a mechanism of four bars, was developed using the Autocad program. The normal force of reaction of the profile in the contact point was determined through the dynamic analysis. The equations of dynamic balance were based on the laws of Newton-Euler. The linkage was subject to an optimization technique that considered the peak value of soil reaction force as the objective function to be minimized while the link lengths and the spring constant varied through a specified range. The Algorithm of Sequential Quadratic Programming-SQP was implemented of the program computational Matlab. Results were very encouraging; the maximum value of the normal reaction force was reduced from 4,250.33 to 237.13 N, making the floating process much less disturbing to the soil and the sugarcane rate. Later, others variables had been incorporated the mechanism optimized and new otimization process was implemented .

Colheita de cana-de-açúcar com auxílio mecânico

Civil society and sugarcane farmer demands indicate that harvesting technology has enough limitations to jeopardize production in large sugar cane producing areas. This work analyses the current mechanical harvesting compared to a semi-mechanical harvesting proposal, on the bases of eleven characteristics considered determinant for a quick spreading of green cane harvesting on hilly areas, with lower impact on agricultural labor and farmers investment capacity.

Avaliação de perdas invisíveis na colheita mecanizada em dois fluxos de massa de cana-de-açúcar

In this work the performance of a sugar cane chopped harvester was analysed when fed with two sugar cane mass flows, measuring the invisible losses, which are impossible to measure in the field, harvester sugar cane cleaning efficiency and air velocity on extractors exit. The trial was done under controlled conditions at Copersucar Technology Center in January 2000. The results showed that the flow of sugar cane through the harvester doesn't influence the magnitudes of total invisible losses and raw material cleaning efficiency. The mean air velocity on the primary extractors exit was 12.0 m s-1, and 9.2 m s-1 on the secondary extractor, with a coefficient of variation of 21%, indicating that the poor cleaning performance of the harvester could be related to air velocity difference inside the extractor. Analyzing the data collected in the trials, it was possible to conclude that invisible losses in sugar cane harvester were 10% and the cleaning efficiency was 87%.

Modelos de transferência de metal pesado na cana-de-açúcar adubada com composto de lixo urbano

The research approaches recycling of urban waste compost (UWC) as an alternative fertilizer for sugarcane crop and as a social and environmental solution to the solids residuals growth in urban centers. A mathematical model was used in order to know the metal dynamics as decision support tool, aiming to establish of criteria and procedures for UWC's safe use, limited by the amount of heavy metal. A compartmental model was developed from experimental data in controlled conditions and partially checked with field data. This model described the heavy metal transference in the system soil-root-aerial portion of sugarcane plants and concluded that nickel was metal to be concern, since it takes approximately three years to be attenuated in the soil, reaching the aerial portions of the plant at high concentrations. Regarding factors such as clay content, oxide level and soil pH, it was observed that for soil with higher buffering capacity, the transfer of the majority of the metals was slower. This model may become an important tool for the attainment of laws regarding the UWC use, aiming to reduce environment contamination the waste accumulation and production costs.